Sender JMS Adapter - NOT Working

Hello Everybody - We are on SP13, also installed JMS Driver files on the system. We are running, Central Adapter Engine.
We configured the Sender JMS Adapter for WBI MQ->XI->SAP scenario. We need to JMS Adapter to be configured to connect to WBI from XI. Everything looks great in configuration but in the Adpater Monitoring, JMS Adapter is with Error Status and Message says "Sender channel. Details: (No detail information set.)".
Does anybody has any idea about this error ?
I checked SAP Help link as well on this. Based on this link http://help.sap.com/saphelp_nw04/helpdata/en/ca/e7673c86d19b35e10000000a11402f/frameset.htm. Do we need to configure this JMS Adapter somewhere on teh server as well ? If yes, then where ? Pls respond if you have any clue about it.
Thanks in anticipation...

Hello Stefan - Thanks for response.
Here are the Parameters.......
Adapter Type: JMS
Sender Type Clicked
Transport protocol:WebSphereMQ (non-JMS)
Message protocol:JMS 1.x
Adapter Engine:Integration Server
Queue ConnectionFactory Java Class:com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java Class:com.ibm.mq.jms.MQQueue
IP Address or Server Name:10.9.48.154
Server Port:1414
Queue Manager Name:WBIDEV
Channel Name:WBI.XI.SVRCONN
JMS Queue:XI_REQUEST
Transport/Network Protocol:TCP/IP
JMS-Compliant:JMS-Compliant
Transactional JMS Session:Check box Set
JMS Queue User:XIUSER
JMS Queue Password:********
Set XI message ID(MessageID) to:GUID(recommended value)
Set XI cenversation ID(conversationID) to:No value
Mapping of Message:Message Payload=JMS Payload
Quality of Service:Exactly Once
Time Period for duplicate check for EO(IO)(secs):86400
Wait After Message Error(msecs):1000
Wait before Reconnect(msecs):1000
Status:Active
The Error Message I see in the Adapter Monitor is "Sender Channel. Details: (No detail information set.)
Pls advice If I am missing anything ?
Thanks....
Amrish.

Similar Messages

Archive file with errors in sender file adapter not working! please help!

Hi Experts,
I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
What am I missing? DO I need to do some more configurations?
What are the prerequisites if any for this option?
How to test this?
Please help me! I will be greatfull to you all!
Thanks & Regards
Gopal

and go thru this links
Creating a Single Archive of the Version Files
http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Sender FTP Adapter not working with certain name

Hello,
We're facing the next problem within XI.
We configured a sender FTP adapter within the central adapter engine. This adapter is configured correctly however for some reason it is not picking up any file from the FTP server.
Changing status to inactive-> active again all kinds of modes and configs we tested.
However when copying this non-working adapter to a new one with a different name (Configuration is exactly the same!!!!!) and use this one in the sender agreement it worked immediately.
Somebody else faced similar problems and managed to solve it because for this error we don't want to adjust our naming conventions....
Thanks,
Emile

Hi Emile,
This could happen when AE cache is not getting updated.
Goto SXI_CACHE.
Click "Goto" -> AE Cache and check if you get a green symbol with a message saying " Cache contents are up-to-date".
Regards,
Anish

Sender JMS Connectivity not working

Hi All,
We have developed a scenario where we have to pick messages from DTS JMS queue and we are using JMS provider with JNDI as the sender transport protocol. We have deployed the jar files given by the DTS team successfully in our XI 3.0 system and we have configured the sender JMS channel. Since this queue is in another NWDS sever, we have also set Additional JMS parameters: JNDI.InitialContext.property.5=java.lang.String force_remote, java.lang.String true.
But when we are testing, I am getting the below error in Adapter monitoring :
Sender channel. Details: com/sap/jms/client/connection/RemoteConnectionFactoryInterface (Unsupported major.minor version 49.0)
Please let me know if I have missed any parameters or any suggestions to solve the issue.
Thanks,
Laawanya

Hello Stefan - Thanks for response.
Here are the Parameters.......
Adapter Type: JMS
Sender Type Clicked
Transport protocol:WebSphereMQ (non-JMS)
Message protocol:JMS 1.x
Adapter Engine:Integration Server
Queue ConnectionFactory Java Class:com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java Class:com.ibm.mq.jms.MQQueue
IP Address or Server Name:10.9.48.154
Server Port:1414
Queue Manager Name:WBIDEV
Channel Name:WBI.XI.SVRCONN
JMS Queue:XI_REQUEST
Transport/Network Protocol:TCP/IP
JMS-Compliant:JMS-Compliant
Transactional JMS Session:Check box Set
JMS Queue User:XIUSER
JMS Queue Password:********
Set XI message ID(MessageID) to:GUID(recommended value)
Set XI cenversation ID(conversationID) to:No value
Mapping of Message:Message Payload=JMS Payload
Quality of Service:Exactly Once
Time Period for duplicate check for EO(IO)(secs):86400
Wait After Message Error(msecs):1000
Wait before Reconnect(msecs):1000
Status:Active
The Error Message I see in the Adapter Monitor is "Sender Channel. Details: (No detail information set.)
Pls advice If I am missing anything ?
Thanks....
Amrish.

KeyFieldValue in Sender File Adapter Not Working

Hi,
I have a flat file like this...
1Field1Field2Filed3.....
2Field1Field2Field3....
1Field1Field2Filed3.....
2Field1Field2Field3.....
1Field1Field2Filed3.....
2Field1Field2Field3....
My requirement is to pick only lines starting with '1'.
I have configured the Sender File Adapter like this,
Recordset Structure : SOURCE,*
Key Field Name: KF
Key Field Type : String(Case-Sensitive)
File Content Conversion:
SOURCE.fieldFixedLengths 1,5,5,5....
SOURCE.fieldNames KF,FIELD1,FIELD2....
SOURCE.keyFieldValue 1
After all this, still it picks up all the recored instead of records starting with '1'. Can any one solve this?
Regards,
Sreedhar

If you feel module processor is bit tough you can use XSLT Mapping which is simple in sloving ur problem.
Check this blog to do a sample example using module processor.
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
To implement the above check this link....
https://websmp201.sap-ag.de/~sapdownload/011000358700003237612005E/HowToCreateAdapterModules.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e21106cc-0c01-0010-db95-dbfc0ffd83b3
http://help.sap.com/saphelp_nw04/helpdata/en/8b/895e407aa4c44ce10000000a1550b0/content.htm
/people/gowtham.kuchipudi2/blog/2006/01/13/stop-creation-of-an-empty-file-from-file-adapter-using-module

Sender JMS Adapter does not work

Hi all,
We have created a sender JMS adapter with transport protocol "Access JMS Provider with JNDI". The adapter connects to destination successfully, so the connection parameters are right. However, we do not receive any message when the sender sends them.
What parameters should we set to be able to retrieve messages from the queue?
Thanks in advance,
Samantha.

Hi,
Into Communication Channel Monitoring, we get the following errors:
1. Error occurred while processing message: null. Detailed error (if any): java.lang.NullPointerException: at java.text.MessageFormat.applyPattern(MessageFormat.java:414) ...
2. Added dynamic header: DCJMSMessageSelector to XI message null which corresponds to JMS message selector: mentioned in the channel configuration
3. XI message ID corresponding to the JMS message with ID: ID:1109F6E3DF541328-00000000053E as stripped of the "ID:" marker and now has the value: null
4. XI message ID corresponding to JMS message with ID: ID:1109F6E3DF541328-00000000053E will be created with the value of JMSCorrelationID which has the value: null
Where is the problem?
Thanks again,
Samantha.

Sender JMS Adapter error: The JMS provider gave the error message as Not permitted, and the error code is null

I am trying to connect tibcoems with PI using a Sender jms adapter.After successfully installing the drivers , the sender adapter goes into error.
"The JMS Provider gave the error message as Not permitted, and the error code is null"
The Transport protocol is 'Access JMS Provider with JNDI' and i have been given the required parameters from the tibco guys.
Your input are highly appreciated.
Shyam

Hi AQmit,
Thanks for the reply.
Please find the screenshots of what i am trying to do.
Also, Can u direct me how to check the right logs?

Problem with special character like u00E5,u00E4 u00F6 in Sender JMS Adapter

Hi,
Problem:
Sender JMS Adapter has transformation error when the file includes western european characters such as å,ä ö. And because of this reason the data is not picked up by adapter.
The scenrio is JMS --- > XI ---> Proxy.
If the file does not include the western European characters then it is working fine, but when the file include the western european characters such as å, ä, ö so got the error.
Our Efforts:
We have tried ISO8859-1 in JMS Module Tab as shown below.
1. Transfer.ContentType text/xml;charset=ISO-8859-1
AND with this also
2. Transfer.ContentType application/coctet-stream;charset=ISO-8859-1
None of them working.
Error In CC:
In Sender CC monitoring we are getting the below error.
Error while processing message 'aa157082-b064-4421-0fc3-c286d2732093'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error converting Message: sun.io.MalformedInputException: TransformException: Error converting Message: 'sun.io.MalformedInputException' at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java(Compiled Code)) ...
Any suggestion in this regard will be a great help.
Regards,
Sarvesh

> I think you have to figure out first, which codepage you really have, not just try. Maybe you ask someone or you check with a hex editor.
Hi Stefan,
Finally we solved the problem.
As you said above to figure the the codepage, we asked to our MQ team for the same and found that they are using ISO-8859-1. In XI we were also trying with multiple conbinations (ISO-8859-1, UTF-8 and many more), but didn't get any success.
Finally MQ team changed their encoding to UTF-8 and in XI we used ISO-8859-1 and we get the success in picking the data with spl char. Even though in XI the spl char comes in destorted order but at the receiver end they are in proper shape.
Thanks a lot for your help.
Regards,
Sarvesh

How to ignore Recordset name in XML(Sender JMS Adapter)?

Hi All.
I am using Sender JMS Adapter along with content conversion.
I have put in Parameter:
Plain2XMLService xml.ignoreRecordsetName true
still the Inbound payload in SXI_MONITOR has Node Recordset, which should not be the case.
Please advice, does this ignoreRecordsetName works in JMS adapter, if Yes does it works same way as in File Adapter content conversion?
Thanks in Advance

>
Gowtham Peddi wrote:
> Hi All.
>
> I am using Sender JMS Adapter along with content conversion.
>
> I have put in Parameter:
> Plain2XMLService xml.ignoreRecordsetName true
>
> still the Inbound payload in SXI_MONITOR has Node Recordset, which should not be the case.
>
> Please advice, does this ignoreRecordsetName works in JMS adapter, if Yes does it works same way as in File Adapter content conversion?
>
> Thanks in Advance
can you try
ignoreRecordsetName true instead of xml.ignoreRecordsetName
also try to not give any value for the xml.recordsetName parameter.
I actually doubt if we can ignore the record set name using the module.

Sender JMS Adapter: Problem in Recordst

Hi All.
I am using Sender JMS Adapter along with content conversion.
I have put in Parameter:
Plain2XMLService xml.ignoreRecordsetName true
still the Inbound payload in SXI_MONITOR has Node Recordset, which should not be the case.
Please advice, does this ignoreRecordsetName works in JMS adapter, if Yes does it works same way as in File Adapter content conversion?
Thanks in Advance

Hi Pravesh,
Check this file on Sender JMS adapter if it helps you in anyway;
http://help.sap.com/saphelp_nw04s/helpdata/en/ca/e7673c86d19b35e10000000a11402f/frameset.htm
Also check this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50061bd9-e56e-2910-3495-c5faa652b710
Regards,
Subhasha Ranjan

Jms is not working properly in clustered environment

Hi all,
i am using the application server oc4j 10.1.3.1.0 enterprise edition . my application is standalone application(thick client)
we are using the jndi.properties as follows ...
java.naming.factory.initial=com.evermind.server.rmi.RMIInitialContextFactory
java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security,opmn:ormi://172.16.1.38:6006:deceval_group/Security
java.naming.security.principal=oc4juser
java.naming.security.credentials=oc4juser
oracle.j2ee.rmi.loadBalance=lookup
we have two application servers in cluster topology as u can see above we have used one instance from one application server and one from another.
i have seen that for every instance there one jms server. at runtime it is taking one application servers services
say opmn port 6005 but when the application is connecting to the another application server say opmn 6006
here jms is not working properly when i send message
As we have clustered environment message must be propagated all the applications who use above jndi.properties.
if i keep use only one application server opmn say
java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security
then its is working excellently
please can u provide any solution ASAP
thanks in advance
Manu

Dear Aravindth
(.*?) means -> Select all contents from where you start and end,
For Ex. <month>(.*?)</month> then Select for start <month> and end last </month> tag.
(?) Match zero or one occurrences. Equivalent to {0,1}.
(*) Match zero or more occurrences. Equivalent to {0,}.
(+) Match one or more occurrences. Equivalent to {1,}.
(.) (Dot). Match any character except newline or another Unicode line terminator.
(.*?) means -> Zero or more times Match any character except newline or another Unicode line terminator + Match zero or more occurrences. Equivalent to {0,}.+Match zero or one occurrences. Equivalent to {0,1}.
Could you please refere the below cite :
http://www.javascriptkit.com/jsref/regexp.shtml
Thanks & Regards
T.R.Harihara SudhaN

MessageTransformBean in sender JMS Adapter flat file to xml conversion

Hi All,
The scenario is MQ (Flat File ) --->PI -
>Idoc
The flat file structure is
112233
AABBCC
The expected XML Structure after using MessageTransformBean in the sender JMS adapter is
<Record>
<Row>
<f1>11</f1>
<f2>22</f2>
<f3>33</f3>
</Row>
<Row>
<f1>AA</f1>
<f2>BB</f2>
<f3>CC</f3>
</Row>
</Record>
But I am getting 2 SEPARATE xml messages each with only one Row in it like the following
1st XML:
<Record>
<Row>
<f1>11</f1>
<f2>22</f2>
<f3>33</f3>
</Row>
</Record>
2nd XML:
<Record>
<Row>
<f1>AA</f1>
<f2>BB</f2>
<f3>CC</f3>
</Row>
</Record>
I would like to have one xml message with all rows in it.It seems the MessageTransformBean is not recognizing the end of line in the flat file.Do i need to use endSeparator explicitly.
I followed the "How to use Content Conversion in JMS Adapter " and configured the adapter,still no luck..
Any Help greatly Appreciated
Thanks,
C

Hi Chirag,
The parameter name sequence changes alphabetically by itself when I save and activate it eventhough I enter as it is in the document.How to stop changing this sequence or put it the order as required in the Module Processor.
Currently my sequence is
Transform.Class
Transform.ContentType
xml.conversionType
xml.documentName
xml.documentNamespace
xml.fieldFixedLengths
xml.fieldNames
xml.processFieldNames
xml.structureTitle
Let me know how to change the sequence ,if that is the issue.
Thanks,
C

Change of Encoding in Sender JMS Adapter

Hi,
My scenario is like that:-
FTP->MQ Queue->JMS Queue->XI->R/3
From JMS Queue IDOC xml is coming in UTF-8 encoding to XI. In that IDOC xml certain special characters are there, say, some Latin or European character. But for the scenario XI->R/3, data are not getting posted to R/3. In XI side, it is not giving any error, but it is giving a flag (in QRFC Monitor) which is Error between two Character Sets.
I am unable to rectify this error. One solution I have guessed that is, it will be possible to resolve this issue if I can change the encoding in XI to ISO-8859-1. But I dont know how to change the encoding in Sender JMS Adapter in XI. Could you please help me to resolve this issue?
BR
Soumya B

Hi,
Check following:
1. In SXMB_MONI, what is the XML structure generated for inbound and outbound message. Check the encoding used in both. This could be checked by looking at the first line of XML generated. For UTF encoding, usually, the first line should look as follows:
<?xml version="1.0" encoding="UTF-8" ?>
2. If the encoding for both is different, try to figure out which encoding is used for Message Type in XI. For matching the encodings, you could change the XSD used for creating message type in XI. This way, the character encoding could be changed. And this solution should suffice if the problem has occured between XI to R3 scenario.
Also, for learning more about character encodings, you could visit following link:
http://www.cs.tut.fi/~jkorpela/chars.html
Hope it helps.
Bhavish.
Reward points if comments found useful:-)

Sender JMS Adapter

Hi,
I am using a sender JMS adapter. Transport Protocol i have given as "Access JMS Provider with JNDI".
In the field "JNDI Server Address" i have to give the server:port.
Here i am not sure which port to give.
Is it the P4 port i.e. 5XX04 or the J2EE port on which the WAS listens i.e. 5XX00.
Please advise.
Regards
Sidharth

Hello Stefan - Thanks for response.
Here are the Parameters.......
Adapter Type: JMS
Sender Type Clicked
Transport protocol:WebSphereMQ (non-JMS)
Message protocol:JMS 1.x
Adapter Engine:Integration Server
Queue ConnectionFactory Java Class:com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java Class:com.ibm.mq.jms.MQQueue
IP Address or Server Name:10.9.48.154
Server Port:1414
Queue Manager Name:WBIDEV
Channel Name:WBI.XI.SVRCONN
JMS Queue:XI_REQUEST
Transport/Network Protocol:TCP/IP
JMS-Compliant:JMS-Compliant
Transactional JMS Session:Check box Set
JMS Queue User:XIUSER
JMS Queue Password:********
Set XI message ID(MessageID) to:GUID(recommended value)
Set XI cenversation ID(conversationID) to:No value
Mapping of Message:Message Payload=JMS Payload
Quality of Service:Exactly Once
Time Period for duplicate check for EO(IO)(secs):86400
Wait After Message Error(msecs):1000
Wait before Reconnect(msecs):1000
Status:Active
The Error Message I see in the Adapter Monitor is "Sender Channel. Details: (No detail information set.)
Pls advice If I am missing anything ?
Thanks....
Amrish.

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
This is a brand new MacBook Pro (15-inch, mid-2012) just received. I suspect that this is a hardware problem as:
The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
The new MacBook Pro powers an Apple Thunderbolt display without issue.
Both MacBook Pro's are running OSX Lion 10.7.4.
The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
All adapters and components (mini-displayport adapters) are Apple retail adapter.
I have tried several external monitors, including my Dell U2412m.
When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode. Using the "Detect displays" button has no effect, even when used multiple times. Rebooting does not help, nor does resetting the SMC or PRAM.
Any other suggestions before I take it to the Genius Bar?

I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure. Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous). However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
Hope that htis helps.

Sender JMS Adapter - NOT Working

Similar Messages

Maybe you are looking for