Sender JMS Adapter: Problem in Recordst

Hi All.
I am using Sender JMS Adapter along with content conversion.
I have put in Parameter:
Plain2XMLService xml.ignoreRecordsetName true
still the Inbound payload in SXI_MONITOR has Node Recordset, which should not be the case.
Please advice, does this ignoreRecordsetName works in JMS adapter, if Yes does it works same way as in File Adapter content conversion?
Thanks in Advance

Hi Pravesh,
Check this file on Sender JMS adapter if it helps you in anyway;
http://help.sap.com/saphelp_nw04s/helpdata/en/ca/e7673c86d19b35e10000000a11402f/frameset.htm
Also check this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50061bd9-e56e-2910-3495-c5faa652b710
Regards,
Subhasha Ranjan

Similar Messages

Problem with special character like u00E5,u00E4 u00F6 in Sender JMS Adapter

Hi,
Problem:
Sender JMS Adapter has transformation error when the file includes western european characters such as å,ä ö. And because of this reason the data is not picked up by adapter.
The scenrio is JMS --- > XI ---> Proxy.
If the file does not include the western European characters then it is working fine, but when the file include the western european characters such as å, ä, ö so got the error.
Our Efforts:
We have tried ISO8859-1 in JMS Module Tab as shown below.
1. Transfer.ContentType text/xml;charset=ISO-8859-1
AND with this also
2. Transfer.ContentType application/coctet-stream;charset=ISO-8859-1
None of them working.
Error In CC:
In Sender CC monitoring we are getting the below error.
Error while processing message 'aa157082-b064-4421-0fc3-c286d2732093'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error converting Message: sun.io.MalformedInputException: TransformException: Error converting Message: 'sun.io.MalformedInputException' at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java(Compiled Code)) ...
Any suggestion in this regard will be a great help.
Regards,
Sarvesh

> I think you have to figure out first, which codepage you really have, not just try. Maybe you ask someone or you check with a hex editor.
Hi Stefan,
Finally we solved the problem.
As you said above to figure the the codepage, we asked to our MQ team for the same and found that they are using ISO-8859-1. In XI we were also trying with multiple conbinations (ISO-8859-1, UTF-8 and many more), but didn't get any success.
Finally MQ team changed their encoding to UTF-8 and in XI we used ISO-8859-1 and we get the success in picking the data with spl char. Even though in XI the spl char comes in destorted order but at the receiver end they are in proper shape.
Thanks a lot for your help.
Regards,
Sarvesh

Change of Encoding in Sender JMS Adapter

Hi,
My scenario is like that:-
FTP->MQ Queue->JMS Queue->XI->R/3
From JMS Queue IDOC xml is coming in UTF-8 encoding to XI. In that IDOC xml certain special characters are there, say, some Latin or European character. But for the scenario XI->R/3, data are not getting posted to R/3. In XI side, it is not giving any error, but it is giving a flag (in QRFC Monitor) which is Error between two Character Sets.
I am unable to rectify this error. One solution I have guessed that is, it will be possible to resolve this issue if I can change the encoding in XI to ISO-8859-1. But I dont know how to change the encoding in Sender JMS Adapter in XI. Could you please help me to resolve this issue?
BR
Soumya B

Hi,
Check following:
1. In SXMB_MONI, what is the XML structure generated for inbound and outbound message. Check the encoding used in both. This could be checked by looking at the first line of XML generated. For UTF encoding, usually, the first line should look as follows:
<?xml version="1.0" encoding="UTF-8" ?>
2. If the encoding for both is different, try to figure out which encoding is used for Message Type in XI. For matching the encodings, you could change the XSD used for creating message type in XI. This way, the character encoding could be changed. And this solution should suffice if the problem has occured between XI to R3 scenario.
Also, for learning more about character encodings, you could visit following link:
http://www.cs.tut.fi/~jkorpela/chars.html
Hope it helps.
Bhavish.
Reward points if comments found useful:-)

Sender JMS Adapter does not work

Hi all,
We have created a sender JMS adapter with transport protocol "Access JMS Provider with JNDI". The adapter connects to destination successfully, so the connection parameters are right. However, we do not receive any message when the sender sends them.
What parameters should we set to be able to retrieve messages from the queue?
Thanks in advance,
Samantha.

Hi,
Into Communication Channel Monitoring, we get the following errors:
1. Error occurred while processing message: null. Detailed error (if any): java.lang.NullPointerException: at java.text.MessageFormat.applyPattern(MessageFormat.java:414) ...
2. Added dynamic header: DCJMSMessageSelector to XI message null which corresponds to JMS message selector: mentioned in the channel configuration
3. XI message ID corresponding to the JMS message with ID: ID:1109F6E3DF541328-00000000053E as stripped of the "ID:" marker and now has the value: null
4. XI message ID corresponding to JMS message with ID: ID:1109F6E3DF541328-00000000053E will be created with the value of JMSCorrelationID which has the value: null
Where is the problem?
Thanks again,
Samantha.

MessageTransformBean in sender JMS Adapter flat file to xml conversion

Hi All,
The scenario is MQ (Flat File ) --->PI -
>Idoc
The flat file structure is
112233
AABBCC
The expected XML Structure after using MessageTransformBean in the sender JMS adapter is
<Record>
<Row>
<f1>11</f1>
<f2>22</f2>
<f3>33</f3>
</Row>
<Row>
<f1>AA</f1>
<f2>BB</f2>
<f3>CC</f3>
</Row>
</Record>
But I am getting 2 SEPARATE xml messages each with only one Row in it like the following
1st XML:
<Record>
<Row>
<f1>11</f1>
<f2>22</f2>
<f3>33</f3>
</Row>
</Record>
2nd XML:
<Record>
<Row>
<f1>AA</f1>
<f2>BB</f2>
<f3>CC</f3>
</Row>
</Record>
I would like to have one xml message with all rows in it.It seems the MessageTransformBean is not recognizing the end of line in the flat file.Do i need to use endSeparator explicitly.
I followed the "How to use Content Conversion in JMS Adapter " and configured the adapter,still no luck..
Any Help greatly Appreciated
Thanks,
C

Hi Chirag,
The parameter name sequence changes alphabetically by itself when I save and activate it eventhough I enter as it is in the document.How to stop changing this sequence or put it the order as required in the Module Processor.
Currently my sequence is
Transform.Class
Transform.ContentType
xml.conversionType
xml.documentName
xml.documentNamespace
xml.fieldFixedLengths
xml.fieldNames
xml.processFieldNames
xml.structureTitle
Let me know how to change the sequence ,if that is the issue.
Thanks,
C

Sender JMS Adapter - NOT Working

Hello Everybody - We are on SP13, also installed JMS Driver files on the system. We are running, Central Adapter Engine.
We configured the Sender JMS Adapter for WBI MQ->XI->SAP scenario. We need to JMS Adapter to be configured to connect to WBI from XI. Everything looks great in configuration but in the Adpater Monitoring, JMS Adapter is with Error Status and Message says "Sender channel. Details: (No detail information set.)".
Does anybody has any idea about this error ?
I checked SAP Help link as well on this. Based on this link http://help.sap.com/saphelp_nw04/helpdata/en/ca/e7673c86d19b35e10000000a11402f/frameset.htm. Do we need to configure this JMS Adapter somewhere on teh server as well ? If yes, then where ? Pls respond if you have any clue about it.
Thanks in anticipation...

Hello Stefan - Thanks for response.
Here are the Parameters.......
Adapter Type: JMS
Sender Type Clicked
Transport protocol:WebSphereMQ (non-JMS)
Message protocol:JMS 1.x
Adapter Engine:Integration Server
Queue ConnectionFactory Java Class:com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java Class:com.ibm.mq.jms.MQQueue
IP Address or Server Name:10.9.48.154
Server Port:1414
Queue Manager Name:WBIDEV
Channel Name:WBI.XI.SVRCONN
JMS Queue:XI_REQUEST
Transport/Network Protocol:TCP/IP
JMS-Compliant:JMS-Compliant
Transactional JMS Session:Check box Set
JMS Queue User:XIUSER
JMS Queue Password:********
Set XI message ID(MessageID) to:GUID(recommended value)
Set XI cenversation ID(conversationID) to:No value
Mapping of Message:Message Payload=JMS Payload
Quality of Service:Exactly Once
Time Period for duplicate check for EO(IO)(secs):86400
Wait After Message Error(msecs):1000
Wait before Reconnect(msecs):1000
Status:Active
The Error Message I see in the Adapter Monitor is "Sender Channel. Details: (No detail information set.)
Pls advice If I am missing anything ?
Thanks....
Amrish.

How to hanlde breaked large messages in sender JMS adapter

Hi,
I have been asked like 'how can we handle breaked large messages in sender JMS adapter?'and lets say I am getting some messages as it is and some are breaked into small segements for the mesaages that are large....
do we need to use module,if so is there any standard module that we can use to hanlde this type of scenarios?
thank you in advance.
babu

http://biemond.blogspot.com/2009/10/jms-request-reply-interaction-pattern.html
if you check the blog of edwin, see his comments at the bottom
there he gives a suggestion how to add the selector properties to filter on
and this one is maybe helpfull
http://blogs.oracle.com/adapters/2010/05/configuring_request-reply_in_jmsadapter.html

Sender JMS adapter configuration for IBM MQSeries

Dear All,
i am doing a IBM MQSeries 5.2.x Message ->sender JMS adapter -> XI server -> receiver RFC adapter -> R/3.
i have deployed the JMS adapter with the required jar files of IBM MQSeries 5.2.x in XI server.
in Sender JMS adapter configuration for IBM MQSeries 5.2.x, i have put following data:
1. Transport Protocol: Websphere MQ - is it okay?
in JMS provider settings:
2. in channel name - what should be there?
3. Transport Network protocol should be TCP/IP or WebsphereMQ - how to decide this thing.
4. JMS Complaint - whether WebsphereMQ or JMS API.
in JMS Settings:
5. JMS Queue user - is this IBM MQSeries 5.2.x Queue User or someother user?
6. JMS Message Selector - what data to take here.
So if anybody has connected IBM MQSeries 5.2.x to XI via JMS adapter, please answer my above queries.
Regards,
Rajeev Gupta

Hi Swaroop,
you can send me those documents at my gmail-id : [email protected]
Hi All,
one more question - to connect XI server to IBM MQSeries via JMS adapter in ID, do we need to have a MQSeries Client installed on XI server - or - just by configuring JMS adapter, we can send messages from IBM MQSeries to XI server without any MQSeries client on XI server?
Why Channel name is required in JMS configuration data?
Thanks,
Rajeev Gupta

How to ignore Recordset name in XML(Sender JMS Adapter)?

Hi All.
I am using Sender JMS Adapter along with content conversion.
I have put in Parameter:
Plain2XMLService xml.ignoreRecordsetName true
still the Inbound payload in SXI_MONITOR has Node Recordset, which should not be the case.
Please advice, does this ignoreRecordsetName works in JMS adapter, if Yes does it works same way as in File Adapter content conversion?
Thanks in Advance

>
Gowtham Peddi wrote:
> Hi All.
>
> I am using Sender JMS Adapter along with content conversion.
>
> I have put in Parameter:
> Plain2XMLService xml.ignoreRecordsetName true
>
> still the Inbound payload in SXI_MONITOR has Node Recordset, which should not be the case.
>
> Please advice, does this ignoreRecordsetName works in JMS adapter, if Yes does it works same way as in File Adapter content conversion?
>
> Thanks in Advance
can you try
ignoreRecordsetName true instead of xml.ignoreRecordsetName
also try to not give any value for the xml.recordsetName parameter.
I actually doubt if we can ignore the record set name using the module.

Sender JMS Adapter with EOIO Quality of Service

Hi,
I have a sender JMS adapter with a quality of service as EOIO. In the SAP help it says that I need to specify the "Processing J2EE Cluster Server (Cluster ID)". Just wondering how I get this value? Does anyone have an example?
Thanks,
Krishneel

Hi,
Please go through the bleow Wiki:
http://wiki.sdn.sap.com/wiki/display/XI/FAQ+J2EEJMS+Adapter
http://help.sap.com/saphelp_nwpi71/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
Thanks,
satya

Sender jms adapter-archiving before processing the message

Hi,
Do we have any option in Sender JMS adapter to archive the message before processing the message?
I have searched in sender JMS adapter (XI7.0) settings, but couldn't find any option.
My assumption is whether any option provided in configuration setting of adapter engine or any other alternatives.
Thanks,
Srini.

Hi Srini.
Here is the code. But you may prefer the EAR module, just for deploy. I need your email to send it to you.
If you want to create it yourself follow the steps in this guide and paste the code:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f013e82c-e56e-2910-c3ae-c602a67b918e
When you configure the module in the JMS sender communication channel you have to spedify 2 parameter for the log file location:
"file.path" (XI server file system path) and "file.name"
CODE:
package com.bfa.af.modules;
import java.io.FileWriter;
import java.io.IOException;
import java.io.PrintWriter;
import java.util.Date;
import javax.ejb.CreateException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import com.sap.aii.af.mp.module.Module;
import com.sap.aii.af.mp.module.ModuleContext;
import com.sap.aii.af.mp.module.ModuleData;
import com.sap.aii.af.mp.module.ModuleException;
import com.sap.aii.af.ra.ms.api.Message;
@author ibermatica
public class BFATraceModule implements SessionBean, Module {
     private SessionContext myContext;
     public void ejbRemove() {
     public void ejbActivate() {
     public void ejbPassivate() {
     public void setSessionContext(SessionContext context) {
          myContext = context;
     public void ejbCreate() throws CreateException {
     public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData) throws ModuleException
          FileWriter outFile;
          try
               Date date = new Date();
               String filePath = moduleContext.getContextData("file.path");
               String fileName = moduleContext.getContextData("file.name");
               outFile = new FileWriter(filePath + System.getProperty("file.separator") + fileName, true);
          catch (IOException e)
               e.printStackTrace();
               throw new ModuleException(e);
          PrintWriter out = new PrintWriter(outFile, true);
          try
               out.println("--- Start of message ---");
               //Get message content.
               Message data = (Message)inputModuleData.getPrincipalData();
               if(data.getDocument() != null)
                    out.println(data.getDocument().getText());
               else
                    out.println("Empty message.");
               out.println("--- End of message ---");
               out.println("Total characters: " + data.getDocument().getText().length());
          catch(Exception exc)
               out.println(exc.toString());
          finally
               if(out != null)
                    out.close();
               if(outFile != null)
                    try {
                         outFile.close();
                    } catch (IOException e1) {
                         throw new ModuleException(e1);
          return inputModuleData;

Sender JMS Adapter

Hi,
I am using a sender JMS adapter. Transport Protocol i have given as "Access JMS Provider with JNDI".
In the field "JNDI Server Address" i have to give the server:port.
Here i am not sure which port to give.
Is it the P4 port i.e. 5XX04 or the J2EE port on which the WAS listens i.e. 5XX00.
Please advise.
Regards
Sidharth

Hello Stefan - Thanks for response.
Here are the Parameters.......
Adapter Type: JMS
Sender Type Clicked
Transport protocol:WebSphereMQ (non-JMS)
Message protocol:JMS 1.x
Adapter Engine:Integration Server
Queue ConnectionFactory Java Class:com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java Class:com.ibm.mq.jms.MQQueue
IP Address or Server Name:10.9.48.154
Server Port:1414
Queue Manager Name:WBIDEV
Channel Name:WBI.XI.SVRCONN
JMS Queue:XI_REQUEST
Transport/Network Protocol:TCP/IP
JMS-Compliant:JMS-Compliant
Transactional JMS Session:Check box Set
JMS Queue User:XIUSER
JMS Queue Password:********
Set XI message ID(MessageID) to:GUID(recommended value)
Set XI cenversation ID(conversationID) to:No value
Mapping of Message:Message Payload=JMS Payload
Quality of Service:Exactly Once
Time Period for duplicate check for EO(IO)(secs):86400
Wait After Message Error(msecs):1000
Wait before Reconnect(msecs):1000
Status:Active
The Error Message I see in the Adapter Monitor is "Sender Channel. Details: (No detail information set.)
Pls advice If I am missing anything ?
Thanks....
Amrish.

Sender JMS Adapter error: The JMS provider gave the error message as Not permitted, and the error code is null

I am trying to connect tibcoems with PI using a Sender jms adapter.After successfully installing the drivers , the sender adapter goes into error.
"The JMS Provider gave the error message as Not permitted, and the error code is null"
The Transport protocol is 'Access JMS Provider with JNDI' and i have been given the required parameters from the tibco guys.
Your input are highly appreciated.
Shyam

Hi AQmit,
Thanks for the reply.
Please find the screenshots of what i am trying to do.
Also, Can u direct me how to check the right logs?

Synchronous sender JMS adapter

Hi ,
I need to do a synchronous scenario : JMS - PI - Proxy
can sender jms adapter be synchronous ?
Thnx

Hi,
can sender jms adapter be synchronous ?
JMS supports asynchronous communication only. However, a request/response model similar to synchronous communication can be implemented using a reply queue mechanism and JMS Correlation ID/JMS Message ID.
Search on SDN / SAP Help, there are plenty of documents related to this.
Regards,
Neetesh

Content conversion in Sender JMS Adapter

Hi,
Scenario is file to IDoc
My source file is   ' ; ' separated file coming from MQ via JMS adapter. now I need to convert this to XI.
Source DT looks like
Root
HEADER (Occurance 1)
     Field 1
     ISOCURCD
     TRANKODE
     IDENTIFIER
     DATO
     TIME
DETAIL(Occurance 1 to unbounded)
     ISOCURCD
     TRANKODE
     EFFDATE
     COMMDATE
     DKKVAL1
     USDVAL1
TRAILER(Occurance 1)
     ISOCURCD
     TRANKODE
      TRANCOUNT
According to How to use content conversion in JMS guide from SDN i have configured the content conversion parameters in the module of JMS sender adapter.
In the processing sequence given the module name as localejbs/AF_Modules/MessageTransformBean and module Key as Plain2XML.
And in module configuration
Parameter Name                      Parameter Value
Transform.Class                          com.sap.aii.messaging.adapter.Conversion
Transform.ContentType                     text/xml;charset=utf-8
xml.keyFieldName                          TRANKODE
xml.keyFieldType                          CaseSensitiveString
xml.recordsetName                          Root
xml.documentName                                   MT_ROOT
xml.documentNamespace                          http://XXX.XXX.XX/xi/XXXXX
xml.processFieldNames          fromConfiguration
xml.conversionType                                   StructPlain2XML
xml.recordsetStructure          HEADER,1,DETAIL,*,TRAILER,1
xml.HEADER.fieldNames           Field1,ISOCURCD,TRANKODE,IDENTIFIER,DATO,TIME
xml.HEADER.fieldSeparator                     ";"
xml.HEADER.keyFieldValue                     H
xml.fieldSeparator                                      ";"(if i don't use this then the file is not being picked and getting an error in the CC monitoring of RWB saying xml.field separator missing.)
Similarily for Detail and Trailer records as well.
But when I run the scenario, the file is being picked up but I am not getting any payload into the inbound message.
Can you please help me where I have configured wrongly. And one more thing will this configuration help for ; separated file .
Thanks & Regards,
Kumar
Edited by: Kumar on Dec 19, 2007 11:11 AM
Edited by: Kumar on Dec 19, 2007 11:15 AM

HI,
Have you gone through the below pdf i think it will help to find ur mistake.
How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Thnx
Chiarg

Sender JMS Adapter: Problem in Recordst

Similar Messages

Maybe you are looking for