Sender JMS Error

Hi
I have to pick up message from WMS (MQ Series), and I have set up JMS adapter, it is showing me message as
'Sucessfully connected to destination 'queue://DTA.WMS.VIC_PRCONF.IN?CCSID=819&targetCleint=1'
But it is not picking up any message from the queue.
Can you please let me know what could be the reson for not picking up messages.
Regards
Ria

Hi Ria Sen,
          They are somany reasons for not picking the data from Queue.
1) First Check ADAPTER is active or not.
2)Once its not pick up the data from queue its shows the error in ADAPTER MONITORING, So check adapter monitoring in RWB.
3) Is their any special chacters (or) any imporper data in the queue , its not pick up the data.
So check these reasons and again put the data in queue.
Regards,
Skumar

Similar Messages

  • Duplicate MessageID error in sender JMS

    Hi,
    could anyone provide some inputs in getting through the following error in sender JMS:
    A duplicate JMS message was received. It was was received earlier and processed with the XI message ID 3fc663bf-c3ee-4eb8-179e-ad28e0ecde3a. It will be ignored and discarded from the JMS queue.
    I have tried changing follwoign settings but still no use...
    Under the PROCESSING tab, under XI SETTINGS
    Time period for Duplicate Check for EO(IO) (secs) it was set to 86400
    I have changed this to 300 seconds
    Regards,
    Chinna.

    remove the duplicate entry from the java table XI_AF_SVC_ID_MAP

  • Sender JMS Adapter error: The JMS provider gave the error message as Not permitted, and the error code is null

    I am trying to connect tibcoems with PI using a Sender jms adapter.After successfully installing the drivers , the sender adapter goes into error.
    "The JMS Provider gave the error message as Not permitted, and the error code is null"
    The Transport protocol is 'Access JMS Provider with JNDI' and i have been given the required parameters from the tibco guys.
    Your input are highly appreciated.
    Shyam

    Hi AQmit,
    Thanks for the reply.
    Please find the screenshots of what i am trying to do.
    Also, Can u direct me how to check the right logs?

  • Sender JMS Channel Error

    Hi all,
    I have been facing with this problem with sender JMS channel, any pointers as to where can be the solution for it
    The error details are as follows
    JMS and XI identifiers for the message are ID:414d512056515933444e41575445202048aa8802235bad01 and a2d32e30-7aae-11dd-ae1c-001125cc0c0c respectively. The JMS adapter will rollback the database and JMS session transactions. If the session is transacted, the message is not lost and will be retried later. The exception stack trace is java.lang.Exception
    at com.sap.aii.af.service.jms.WorkerJMSReceiver.onMessage(WorkerJMSReceiver.java:963)
    at com.ibm.mq.jms.MQMessageConsumer.receiveAsyncQ(MQMessageConsumer.java:2539)
    at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:4262)
    Messages are not being placed in the Queue. the Queues are newly created is there something which has been missed out during the creation of the Queues
    Rgds
    Aditya

    Hi Aditya
    Try this way:
    1. uncheck JMS transactional session check box in JMS sender communication channel.
    2. Once it is done, insert new message in JMS queue.
    Thanks
    Sai

  • JMS sender cc error: Error while calling operation 'setChannel' for object

    Hi guys,
    I'm getting following error in my sender JMS adapter which tries to connect to Websphere MQ:
    Error while calling operation 'setChannel' for object '|   com.ibm.mq.jms.MQQueueConnectionFactory
    it is then followed by connection and system parameters.
    Any idea, what could be wrong?
    I also doubt about cc's connection parameters:
    - transport network protocol: should I use TCP/IP or WebsphereMQ?
    - JMS compliant: non-JMS or JMS compliant?
    thanks for your help,
    olian

    Hi Olian,
    the configuration of a JMS adapter requires close working with the MQ team. they are best people to tell  you what is the correct parameter value.
    depending on the "transport protocol" he will be able to help you complete the configuration.
    if you have chosen "websphere MQ (non-jms)", the transport/network protocol and Jms-compliance depends on the configuration made on the network and MQ.
    Raghu

  • Problem in sending JMS message on remote OC4J

    I have two OC4J standalone (10.1.3.0.0 build 041119.0001.2385)
    The containers work on Windows2000 in different machines connected by the LAN.
    The First container has deployed application from example http://www.oracle.com/technology/tech/java/oc4j/1013/howtos/how-to-jca-intro/doc/how-to-jca-intro.html
    The second container has j2ee application (Servlet) that sending JMS messages in the queue of the first container.
    Code Servlet in second OC4J:
    package mypackage2;
    import javax.servlet. *;
    import javax.servlet.http. *;
    import java.io. PrintWriter;
    import java.io. IOException;
    import javax.jms. *;
    import javax.naming. *;
    import java.util. *;
    public class Servlet1 extends HttpServlet
    private static final String CONTENT_TYPE = "text/html;charset=windows-1251";
    public void init (ServletConfig config) throws ServletException
    super.init (config);
    String QUEUE_NAME = "OracleASjms/MyQueue1";
    String QUEUE_CONNECTION_FACTORY = "OracleASjms/MyQCF";
    public void doGet (HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException
    response.setContentType (CONTENT_TYPE);
    PrintWriter out = response.getWriter ();
    out.println (" < html > ");
    out.println (" < head > < title > Servlet1 < /title > < /head > ");
    out.println (" < body > ");
    try
    Hashtable env = new Hashtable ();
    env.put (Context. INITIAL_CONTEXT_FACTORY, "oracle.j2ee.rmi.RMIInitialContextFactory");
    env.put (Context. SECURITY_PRINCIPAL, "admin");
    env.put (Context. SECURITY_CREDENTIALS, "admin");
    env.put (Context. PROVIDER_URL, "ormi://host_OC4J_1:23791/jcamdb");
    env.put ("dedicated.rmicontext", "true");
    InitialContext ic = new InitialContext (env);
    QueueConnectionFactory connectionFactory = (QueueConnectionFactory)ic.lookup (QUEUE_CONNECTION_FACTORY);
    QueueConnection connection = connectionFactory.createQueueConnection ();
    connection.start ();
    QueueSession queueSession =
    connection.createQueueSession (false, Session.AUTO_ACKNOWLEDGE);
    Queue queue = (Queue) ic.lookup (QUEUE_NAME);
    ic.close ();
    System.out.println (" Queue: " + queue);
    QueueSender sender = queueSession.createSender (queue);
    System.out.println (" creating Message: " + queue);
    Message message = queueSession.createMessage ();
    System.out.println (" Message created ");
    message.setJMSType ("theMessage");
    message.setLongProperty ("time", System.currentTimeMillis ());
    message.setStringProperty ("id", "11111");
    message.setStringProperty ("oamount", "55555");
    message.setStringProperty ("message", "77777");
    message.setStringProperty ("RECIPIENT", "MDB");
    System.out.println (" Sending message... ");
    sender.send (message);
    System.out.println (" Message sent ");
    sender.close ();
    queueSession.close ();
    connection.close ();
    catch (Exception e)
    System.out.println (" ** TEST FAILED ** < br > Exception: " + e);
    out.println (e.toString ());
    e.printStackTrace ();
    out.println (" < p > The servlet has received a GET. This is the reply. < /p
    ");out.println (" < /body > < /html > ");
    out.close ();
    Error: This code send message in The First container, and should send in the second OC4J !!!!
    Please answer :
    As configure (what code it is necessary to write) servlet (any J2EE the application in OC4J) to use a path to OC4J JMS (remote OC4J JMS) through the Resource Adapter (using OracleASjms.rar). ???

    I have two OC4J standalone (10.1.3.0.0 build 041119.0001.2385)
    The containers work on Windows2000 in different machines connected by the LAN.
    The First container has deployed application from example http://www.oracle.com/technology/tech/java/oc4j/1013/howtos/how-to-jca-intro/doc/how-to-jca-intro.html
    The second container has j2ee application (Servlet) that sending JMS messages in the queue of the first container.
    Code Servlet in second OC4J:
    package mypackage2;
    import javax.servlet. *;
    import javax.servlet.http. *;
    import java.io. PrintWriter;
    import java.io. IOException;
    import javax.jms. *;
    import javax.naming. *;
    import java.util. *;
    public class Servlet1 extends HttpServlet
    private static final String CONTENT_TYPE = "text/html;charset=windows-1251";
    public void init (ServletConfig config) throws ServletException
    super.init (config);
    String QUEUE_NAME = "OracleASjms/MyQueue1";
    String QUEUE_CONNECTION_FACTORY = "OracleASjms/MyQCF";
    public void doGet (HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException
    response.setContentType (CONTENT_TYPE);
    PrintWriter out = response.getWriter ();
    out.println (" < html > ");
    out.println (" < head > < title > Servlet1 < /title > < /head > ");
    out.println (" < body > ");
    try
    Hashtable env = new Hashtable ();
    env.put (Context. INITIAL_CONTEXT_FACTORY, "oracle.j2ee.rmi.RMIInitialContextFactory");
    env.put (Context. SECURITY_PRINCIPAL, "admin");
    env.put (Context. SECURITY_CREDENTIALS, "admin");
    env.put (Context. PROVIDER_URL, "ormi://host_OC4J_1:23791/jcamdb");
    env.put ("dedicated.rmicontext", "true");
    InitialContext ic = new InitialContext (env);
    QueueConnectionFactory connectionFactory = (QueueConnectionFactory)ic.lookup (QUEUE_CONNECTION_FACTORY);
    QueueConnection connection = connectionFactory.createQueueConnection ();
    connection.start ();
    QueueSession queueSession =
    connection.createQueueSession (false, Session.AUTO_ACKNOWLEDGE);
    Queue queue = (Queue) ic.lookup (QUEUE_NAME);
    ic.close ();
    System.out.println (" Queue: " + queue);
    QueueSender sender = queueSession.createSender (queue);
    System.out.println (" creating Message: " + queue);
    Message message = queueSession.createMessage ();
    System.out.println (" Message created ");
    message.setJMSType ("theMessage");
    message.setLongProperty ("time", System.currentTimeMillis ());
    message.setStringProperty ("id", "11111");
    message.setStringProperty ("oamount", "55555");
    message.setStringProperty ("message", "77777");
    message.setStringProperty ("RECIPIENT", "MDB");
    System.out.println (" Sending message... ");
    sender.send (message);
    System.out.println (" Message sent ");
    sender.close ();
    queueSession.close ();
    connection.close ();
    catch (Exception e)
    System.out.println (" ** TEST FAILED ** < br > Exception: " + e);
    out.println (e.toString ());
    e.printStackTrace ();
    out.println (" < p > The servlet has received a GET. This is the reply. < /p
    ");out.println (" < /body > < /html > ");
    out.close ();
    Error: This code send message in The First container, and should send in the second OC4J !!!!
    Please answer :
    As configure (what code it is necessary to write) servlet (any J2EE the application in OC4J) to use a path to OC4J JMS (remote OC4J JMS) through the Resource Adapter (using OracleASjms.rar). ???

  • Problem with special character like u00E5,u00E4 u00F6 in Sender JMS Adapter

    Hi,
    Problem:
    Sender JMS Adapter has transformation error when the file includes western european characters such as å,ä ö. And because of this reason the data is not picked up by adapter.
    The scenrio is JMS --- > XI ---> Proxy.
    If the file does not include the western European characters then it is working fine, but when the file include the western european characters such as å, ä, ö so got the error.
    Our Efforts:
    We have tried ISO8859-1 in JMS Module Tab as shown below.
    1. Transfer.ContentType text/xml;charset=ISO-8859-1
        AND with this also
    2. Transfer.ContentType application/coctet-stream;charset=ISO-8859-1
    None of them working.
    Error In CC:
    In Sender CC monitoring we are getting the below error.
    Error while processing message 'aa157082-b064-4421-0fc3-c286d2732093'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error converting Message: sun.io.MalformedInputException: TransformException: Error converting Message: 'sun.io.MalformedInputException' at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java(Compiled Code)) ...
    Any suggestion in this regard will be a great help.
    Regards,
    Sarvesh

    > I think you have to figure out first, which codepage you really have, not just try. Maybe you ask someone or you check with a hex editor.
    Hi Stefan,
    Finally we solved the problem.
    As you said above to figure the the codepage, we asked to our MQ team for the same and found that they are using ISO-8859-1. In XI we were also trying with multiple conbinations (ISO-8859-1, UTF-8 and many more), but didn't get any success.
    Finally MQ team changed their encoding to UTF-8 and in XI we used ISO-8859-1 and we get the success in picking the data with spl char. Even though in XI the spl char comes in destorted order but at the receiver end they are in proper shape.
    Thanks a lot for your help.
    Regards,
    Sarvesh

  • Change of Encoding in Sender JMS Adapter

    Hi,
       My scenario is like that:-
    FTP->MQ Queue->JMS Queue->XI->R/3
    From JMS Queue IDOC xml is coming in UTF-8 encoding to XI. In that IDOC xml certain special characters are there, say, some Latin or European character. But for the scenario XI->R/3, data are not getting posted to R/3. In XI side, it is not giving any error, but it is giving a flag (in QRFC Monitor) which is “ Error between two Character Sets”.
    I am unable to rectify this error. One solution I have guessed that is, it will be possible to resolve this issue if I can change the encoding in XI to ISO-8859-1. But I don’t know how to change the encoding in Sender JMS Adapter in XI. Could you please help me to resolve this issue?
    BR
    Soumya B

    Hi,
    Check following:
    1. In SXMB_MONI, what is the XML structure generated for inbound and outbound message. Check the encoding used in both. This could be checked by looking at the first line of XML generated. For UTF encoding, usually, the first line should look as follows:
    <?xml version="1.0" encoding="UTF-8" ?>
    2. If the encoding for both is different, try to figure out which encoding is used for Message Type in XI. For matching the encodings, you could change the XSD used for creating message type in XI. This way, the character encoding could be changed. And this solution should suffice if the problem has occured between XI to R3 scenario.
    Also, for learning more about character encodings, you could visit following link:
    http://www.cs.tut.fi/~jkorpela/chars.html
    Hope it helps.
    Bhavish.
    Reward points if comments found useful:-)

  • Sender JMS Adapter - NOT Working

    Hello Everybody - We are on SP13, also installed JMS Driver files on the system. We are running, Central Adapter Engine.
    We configured the Sender JMS Adapter for WBI MQ->XI->SAP scenario. We need to JMS Adapter to be configured to connect to WBI from XI. Everything looks great in configuration but in the Adpater Monitoring, JMS Adapter is with Error Status and Message says "Sender channel. Details: (No detail information set.)".
    Does anybody has any idea about this error ?
    I checked SAP Help link as well on this. Based on this link http://help.sap.com/saphelp_nw04/helpdata/en/ca/e7673c86d19b35e10000000a11402f/frameset.htm. Do we need to configure this JMS Adapter somewhere on teh server as well ? If yes, then where ? Pls respond if you have any clue about it.
    Thanks in anticipation...

    Hello Stefan - Thanks for response.
    Here are the Parameters.......
    Adapter Type: JMS
    Sender Type Clicked
    Transport protocol:WebSphereMQ (non-JMS)
    Message protocol:JMS 1.x
    Adapter Engine:Integration Server
    Queue ConnectionFactory Java Class:com.ibm.mq.jms.MQQueueConnectionFactory
    Queue Java Class:com.ibm.mq.jms.MQQueue
    IP Address or Server Name:10.9.48.154
    Server Port:1414
    Queue Manager Name:WBIDEV
    Channel Name:WBI.XI.SVRCONN
    JMS Queue:XI_REQUEST
    Transport/Network Protocol:TCP/IP
    JMS-Compliant:JMS-Compliant
    Transactional JMS Session:Check box Set
    JMS Queue User:XIUSER
    JMS Queue Password:********
    Set XI message ID(MessageID) to:GUID(recommended value)
    Set XI cenversation ID(conversationID) to:No value
    Mapping of Message:Message Payload=JMS Payload
    Quality of Service:Exactly Once
    Time Period for duplicate check for EO(IO)(secs):86400
    Wait After Message Error(msecs):1000
    Wait before Reconnect(msecs):1000
    Status:Active
    The Error Message I see in the Adapter Monitor is "Sender Channel. Details: (No detail information set.)
    Pls advice If I am missing anything ?
    Thanks....
    Amrish.

  • Probelm in Sender JMS adapter..

    Hi,
    I am doing JMS to IDCO, i have created the queue manger and all the relevant configuration done in MQ but I could not able to see the messages in MONI in XI.
    I have checked the sender communication channel, the error says as:Channel error occurred; detailed error description: JMS error:MQJMS2002: failed to get message from MQ queue, Linked error:MQJE001: Completion Code 2, Reason 2009, Error Code:MQJMS2002
    The same channel is working in one environement and it is not working in other enviroment.
    Could you please explain me the exact problem with solution.
    Do not send me any links..bcz i have already searched in forums.
    Rewards points will be given for correct answers.
    Regards,
    Chadnu.

    well, thanks for answering my question.
    As i explained the same JMS sender channel is working in developement system and it is not working in testing system.
    So we have moved the same object.
    As you said if there is a data problem it couldn't work even in development.
    Regards,
    chandu,

  • Zip or unzip a payload in sender JMS channel

    Hi,
    My scenario is to unzip a payload in sender JMS channel and I have configured the sender JMS module in the below format,
    Processing sequence
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    Module Configuration
    Modulekey            Parameter Name                    Parameter Value
    zip                        zip.mode                                unzip
    I have tried this format also,but it is not working
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    (or)
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    While performing testing,it throws the below error in sender JMS channel,
    The detailed error (if any) is :  com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: while trying to invoke the method java.lang.String.length() of a null object loaded from local variable pattern: NullPointerException: while trying to invoke the method java.lang.String.length() of a null object loaded from local variable 'pattern'at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:185)
    Can someone help me on how to extract a payload in sender JMS channel.
    Also please guide me on how to extract a multiple payloads in one zip file in sender JMS channel.

    Hi,
    Your module sequence seems to be incorrect.
    Try like this,
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    (or)
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    Regards,
    Praveen Gujjeti

  • Unzip a payload in sender JMS channel

    Hi,
    My scenario is to unzip a payload in sender JMS channel and I have configured the sender JMS module in the below format,
    Processing sequence
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    Module Configuration
    Modulekey            Parameter Name                    Parameter Value
    zip                        zip.mode                                unzip
    While performing testing,it throws the below error in sender JMS channel,
    The detailed error (if any) is :  com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: while trying to invoke the method java.lang.String.length() of a null object loaded from local variable pattern: NullPointerException: while trying to invoke the method java.lang.String.length() of a null object loaded from local variable 'pattern'at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:185)
    Can someone help me on how to extract a payload in sender JMS channel.
    Also please guide me on how to extract a multiple payloads in one zip file in sender JMS channel.

    Hi,
    Your module sequence seems to be incorrect.
    Try like this,
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    (or)
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    Regards,
    Praveen Gujjeti

  • Problem with Sender JMS J2EE adapter...

    I have configured the sender JMS J2EE adpater. I am getting this error at Adapter monitoring:
    <b>Sender channel. Details: Last Exception during send at Fri May 25 09:44:18 CEST 2007: Error converting Message: 'java.lang.Exception: ERROR consistency check in recordset structure validation (line no. 1: missing structure(s) in last recordset'.</b>
    I am using recordset structure as Header,1,Item,99999. and also i am ignoring the recordsetName...i tried confiuring the File adapter using same parameters as in JMS adapter it is not giving any error at Adapter Monitoring.
    Also i configured File adapter by putting in their the parameters of J2EE JMS adapter in Module tab, it too worked...
    so What is exactly this error, if anyone can please tell me...

    Hi,
    Check some links for FCC
    Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
    Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
    File Receiver with Content Conversion
    Content Conversion (Pattern/Random content in input file)
    NAB the TAB (File Adapter)
    Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
    Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
    How to send a flat file with various field lengths and variable substructures to XI 3.0
    Content Conversion (Pattern/Random content in input file)
    NAB the TAB (File Adapter)
    File Content Conversion for Unequal Number of Columns
    Content Conversion ( The Key Field Problem )
    The specified item was not found.
    File Receiver with Content Conversion
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
    Regards,
    Phani

  • Problem in Sender JMS J2EE adapter....

    Hello All.
    I have configured the sender JMS J2EE adpater. I am getting this error at Adapter monitoring:
    <b>Sender channel. Details: Last Exception during send at Fri May 25 09:44:18 CEST 2007: Error converting Message: 'java.lang.Exception: ERROR consistency check in recordset structure validation (line no. 1: missing structure(s) in last recordset'.</b>
    I am using recordset structure as Header,1,Item,99999. and also i am ignoring the recordsetName...i tried confiuring the File adapter using same parameters as in JMS adapter it is not giving any error at Adapter Monitoring.
    Also i configured File adapter by putting in their the parameters of J2EE JMS adapter in Module tab, it too worked...
    so What is exactly this error, if anyone can please tell me...
    Thnsk in Advace

    > I think you have to figure out first, which codepage you really have, not just try. Maybe you ask someone or you check with a hex editor.
    Hi Stefan,
    Finally we solved the problem.
    As you said above to figure the the codepage, we asked to our MQ team for the same and found that they are using ISO-8859-1. In XI we were also trying with multiple conbinations (ISO-8859-1, UTF-8 and many more), but didn't get any success.
    Finally MQ team changed their encoding to UTF-8 and in XI we used ISO-8859-1 and we get the success in picking the data with spl char. Even though in XI the spl char comes in destorted order but at the receiver end they are in proper shape.
    Thanks a lot for your help.
    Regards,
    Sarvesh

  • Sender JMS Adapter does not work

    Hi all,
    We have created a sender JMS adapter with transport protocol "Access JMS Provider with JNDI". The adapter connects to destination successfully, so the connection parameters are right. However, we do not receive any message when the sender sends them.
    What parameters should we set to be able to retrieve messages from the queue?
    Thanks in advance,
    Samantha.

    Hi,
    Into Communication Channel Monitoring, we get the following errors:
    1. Error occurred while processing message: null. Detailed error (if any): java.lang.NullPointerException: at java.text.MessageFormat.applyPattern(MessageFormat.java:414) ...
    2. Added dynamic header: DCJMSMessageSelector to XI message null which corresponds to JMS message selector: mentioned in the channel configuration
    3. XI message ID corresponding to the JMS message with ID: ID:1109F6E3DF541328-00000000053E as stripped of the "ID:" marker and now has the value: null
    4. XI message ID corresponding to JMS message with ID: ID:1109F6E3DF541328-00000000053E will be created with the value of JMSCorrelationID which has the value: null
    Where is the problem?
    Thanks again,
    Samantha.

Maybe you are looking for