Sender mail adapter - connecting to Lotus Domino

Hi all,
I'm currently trying to configure a communication channel to pick up from a Lotus Domino mail server using POP3 (I'd be willing to do IMAP4 as well).  The Lotus team has told me that the POP and IMAP services have been activated but I'm not having any luck connecting to the server.  The error message I get each time is exception caught during processing mail message; java.net.ConnectException: A remote host refused an attempted connect operation.
Any ideas?  The configuration I'm using is:
URL: pop://mymailserver.com/mailin/xi_dev_users.nsf
Authentication Method: Plain
User: mmorris (my user has been given access to this mail file)
The rest of the config is default.
I've also tried specifying the port (110) even though that is the default - no luck.

Hi Mike,
pinging successfully does not guarantee you're gonna be able to exchange messages.
Try to connect through telnet through the port you mentioned.
Another possibility: did they set SSL on the POP3 communication?
If yes, you need "pops://" as the protocol in the URL (default port 995).
Best regards,
Henrique.

Similar Messages

  • Sender Mail Adapter configuration connection timed out

    Hi All,
    I am setting up a simple sender mail scenario to test if my mailadapter works.
    But I receive a error message in the Sender Communication Channel I receive this error:
    "exception caught during processing mail message; java.net.ConnectException: Connection timed out: connect"
    I tested File Sender to Mail Receiver Scenario it worked fine.
    But Sender Mail to File Receiver is not working and giving above exception.
    Mail Sender SetUp
    pop://xx.xxx.xx.xx
    In User and Password I have given my Lotus Notes Server user & password credentials
    Pls suggest

    HI Rachit,
    Have you seen the thread
    Sender Mail Adapter
    There it is mentioned that the Lotus notes mail id shoudl be POP3 enabled. Try doing that
    Regards
    Suraj

  • Sender Mail Adapter issue

    Hi All,
    We are getting this error in Sender Mail adapter.
    "exception caught during processing mail message; java.net.ConnectException: A remote host refused an attempted connect operation"
    It is a (Lotus Notes) Mail to File scenario.
    Used POP3, and gave the URL as POP:// ** .
    I have tried pinging the server and getting a good response.
    I have also tried the OS01 ans it returned a response : Program Terminated.
    I am not sure if the POP3 port is enabled.
    Are there any check points we are missing ?
    Please throw some light on this as we need to solve this asap ..
    Yashwanth
    Edited by: YashwanthSVK on Aug 2, 2011 7:18 PM

    Shabarish is right.
    This seem a connectivity issue. Try to ping Mail server from your PI System and check pop3 port.
    This document can be helpful for you:
    http://wiki.sdn.sap.com/wiki/display/XI/SMTPConfigurationinSAPXI

  • Error during configuration of Sender Mail Adapter

    Hellow All,
    I was trying to configure Sender Mail Adapter and I am getting this error.
    <b>error occured: exception caught during processing mail message; java.io.IOException: unexpected greeting response; read 220 mailrelay2.lntinfotech.com ESMTP Service (Lotus Domino Release 6.5.5) ready at Fri, 14 Jul 2006 16:11:29 +0530</b>
    Can anybody please suggest me why this error is occured and how to solve that?
    I am waiting with points, come on
    Thanks in advance,
    Sugata

    HI,
    1)Try to do with POP3
    2)Check the URL , give correct Exchange Server Name/IP address.
    3) Hope you have access to read the inbox (sometimes it will not be there)
    Than try it.
    Regards.
    Moorthy

  • Sender Mail Adapter consegue ler emails com HTML?

    Olá pessoal,
    Encontrei um "issue" onde estou deconfiado de uma limitação do Mail Adapter.
    Gostaria de ouvir suas opiniões.
    O cenário usa um Canal de Comunicação do tipo Mail com XIPAYLOAD em uma caixa POP3, com as seguintes variantes:
    - com ou sem Mail Package;
    - com ou sem encoding;
    - mantendo os anexos.
    Independente das variações acima o resultado do email proveniente do POP é TEXTO.
    Será que o Mail Adapter suporta mensagens HTML?
    Será que o Mail Adapter suporta multipart/alternative Content-Type?
    >Versão do PI: SAP PI 7.0 SP14
    >Mail Server: Lotus Domino 7.0.x
    []´s
    Marlo Simon.

    Marlo,
    o content type é lido a partir do MIME Header que o Cliente de email que enviou a mensagem cria.
    Em geral, mesmo colando um conteudo XML no corpo do email, se o Content Type no Header vier text, o adapter vai interpreta-lo como texto.
    Se vc sabe que o conteudo sempre vai ser um XML, existe uma maneira de forcar que o adapter sempre sete o content type como xml, atraves do parametro avançado IMail.AssumeXMLContent. Veja o help do Sender Mail Adapter:
    Advanced Mode
    To specify additional parameters in the adapter configuration, set the Advanced Mode indicator.
    Specify the additional parameter names and parameter values in the table:
    ●      For the security settings, enter values for the receiver party and receiver service here.
    ●      In the table, set the parameter IMail.AssumeXMLContent = true. The text of the message is then interpreted as XML and is copied unchanged to the mail package. If this parameter is not set, the information is copied from the content type of the MIME header. If the type specified there is application/xml or text/xml, the text of the message is copied as XML; otherwise it is copied as text.
    Abs,
    Henrique.

  • Sender Mail Adapter

    Hi,
      I am working on Sender Mail Adapter. I have done the total configuration but unable to sucess the scenarios. In the CC monitoring, it is saying that "Not Intialised" Even though i send and receive the messages from My Lotus Notes Inbox. I activated all the objects.
    I have done the following examples:
    Transport Protocal: POP3
    Message Protocal: XIALL
    Given the URL and UserId and PWD also
    Poll Intevel: 1 (Mins)
    Adapter Status: Active
    Please help to me solve this problem. I already raised the one more thread today but didn't get solutions.
    <b>Note: Do i need to do any setting from the Lotus notes(Mail Server) to diver my messages.</b>
    Thanks in Advance,
    <b>I found the problem with SMTP Address. Can i use the SMTP Url for POP3 or IMP4 protocal. Is there any thing else because if i use the Same SMTP Address, it is giving exception</b>
    Best Regards,
    Vijay
    Message was edited by:
            Gangisetty Vijaya Bhaskarudu
    Message was edited by:
            Gangisetty Vijaya Bhaskarudu

    Hi Gangisetty,
        SMTP is the out going server(for sending mails out) while POP3 is the in coming(receiving mails) server. So for a sender channel, you need to use the POP server details not SMTP.
    cheers
    danus

  • Sender  Mail Adapter - java.lang.NullPointerException in CC monitoring

    hi,
    I configured my Sender Mail Adapter correctly.
    I have the correct POP URL, authentication. I'm not using PayloadSwapBean right now.
    I can't get rid of the exception inside my Channel monitoring.
    exception caught during processing mail message; java.lang.NullPointerException
    does anyone know why?
    I've been told the POP account has emails already.
    I will try to create an outlook account for this POP e-mail account in the mean time to see the e-mails.
    Thank you

    thanks aaron.
    I don't see the folder ./SYS/../j2ee/...
    will it be under another folder?  I don't see a trace log folder either.
    I think the problem might be in the Module tab.
    I tried.
    AF_Modules/PayloadSwapBean
    localejbs/AF_Modules/PayloadSwapBean
    /localejbs/AF_Modules/PayloadSwapBean
    sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
    localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
    /localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean
    they all produce the same error. I wonder if these Beans actually exist.
    I think we might have to reinstall this Mail Adapter altogether.
    Or maybe it's really the connection to the Mail Server. But would it display this kind of message.
    This is what I'm looking at.
    Also, i had to use this URL
    pop://server:995/
    (995 is using SSL and it is the default port).  When I use this, I see the Java Null Pointer Exception a lot less frequently. Weird.

  • How to determine the protocol to use in Sender mail Adapter ?

    Hi All
    Can i use my Microsoft Exhange Server address while configuring Sender Mail Adapter .? If yes , then which protocol i can use out of IMAP and POP ?..
    How do i determine which protocol i should use to connect to my exchange server ?
    Thanks
    rohan

    Hi Rohan,
    //Can i use my Microsoft Exhange Server address while configuring Sender Mail Adapter .?
    Yes, you can.
    //If yes , then which protocol i can use out of IMAP and POP ?..
    You can use either of them. To know more on IMAP and POP, i would suggest you go through these links,
    http://www.trincoll.edu/depts/cc/documentation/email/IMAP_vs_POP/default.htm
    http://www.imap.org/papers/imap.vs.pop.brief.html
    If your are using IMAP, you will have to specify, which folder from which you wnaty the emmail to be retrived, this is not needed for POP.
    Hope this helps,
    Regards,
    bhavesh

  • Error when using Variable Transport Binding in Sender Mail Adapter

    Hi,
    I am using the Sender Mail Adapter to receive an email, convert the attached tab delimited text file into xml and map it to an IDOC.
    I am using PayloadSwapBean and MessageTransformBean in order to do this, and this all works perfectly.
    I am now trying to access the Adapter Specific Message Attributes to retrieve the SHeaderFROM attribute from the message and map it to a field in the idoc.
    However when I check the "Variable Transport Binding" option in the Advanced tab of the mail adapter, the message no longer goes through to SXMB_MONI and I get the following error in the Java logs.
    Transmitting the message to endpoint http://sapserver:53500/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during parsing of SOAP header.
    Any ideas why this is happening?
    Thanks,
    Brad

    Hi Luciana,
    Honestly, I cant really remember how or if it was resolved and I was just helping out on the issue, but another consultant continued with it, so unfortunately I cant be any help on this.
    Good luck!
    Cheers,
    Brad

  • Sender Mail Adapter problem

    Hi,
    I am having problems to get my sender mail adapter running.
    I configured it with the following parameters:
    <i>Transport protocol: POP3
    Message Protocol: XIALL
    Adapter Engine: Integration Server
    URL: pop://server
    username + pw
    poll intervall: 1 Min.</i>
    The adapter is active and if I look into the adapter monitoring everything seems to be fine (green light).
    But the adapter doesn't poll the messages from the mail account and I cannot see any activity in the message monitoring.
    If I try the same configuration with Thunderbird everthing works fine. Also my receiving mail adapter works without any problems for the same account.
    Do you have any idea what the problem could be or how I could find out what my mail adapter is doing?
    Thanks,
    Andreas

    Hi all, hi Andreas,
    have you solved you problem? Could you please describe how you did it.
    I have the same situation and I haven't any ideas how can I manage it.
    I checked all parameters and compared they with documentation. Everything seems to be ok.
    I didn't see any messages in the message monitoring, but in the chanel monitoring I found follows:
    exception caught during processing mail message; java.net.ConnectException: Connection refused: connect
    I tried the same configuration with email client and it worked. I tried change POP on IMAP with URL imap://server/folder. It didn't work also.
    Could you please help me?
    Thank you in advance,
    Anna

  • B2B Inbound Error - sender mail adapter - SMTP

    Boa tarde
    Estou tendo um erro quando tento ler uma caixa de e-mail via scenario B2B inbound utilizando sender adapter mail (SMTP)
    estou passando as seguintes informações no adapter sender :
    Transport Protocol: POP3
    Message Protocol: XIPAYLOAD
    URL :smtp://sepcsawi003.xxxx.xxx.
    Authentication Method : Plain
    USER : monit.nfe
    SENHA : XXXXX
    Poll interval(Min) : 1
    Keep Attachments : X
    namespace : http://sap.com/xi/NFE/005a
    interface name : NFB2B_procNFe_OB
    Segue o log extraido do comuncation Channel Monitoring :
    In the Last 20 Minutes Server 0 70_34165 not initialized
    Na sxmb_moni não aparece nada.
    Essa configuração está correta para uso de SMTP com sender mail adapter?
    Entrei na máquina do PI e executei o comando telnet sepcsawi003 25 para acessar o servidor de email.
    Recebi o retorno:
    Connecting To sepcsawi003...Could not open connection to the host, on port 25: Connect failed
    Meu administrador me disse que as máquina PI e Email estão se conectando.
    Vocês podem me ajudar?
    Abs,
    Sérgio Salomã

    Boa Tarde
    Lembrando
                     se for Pop3 a vc tem que ter acesso a porta 110  e IMAP4 143 se não me engano por padrão
    de uma olhada nesse link
    http://wiki.sdn.sap.com/wiki/display/XI/StepbyStepMailToFileScenario
    não esqueça  no adapter sender mail
    na aba module
    Processing Sequence
    1 localejbs/AF_Modules/PayloadSwapBean | Local Enterprise Bean | 1
    2 localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean | Local Enterprise Bean | mail
    Module Configuration
    1 | swap.keyName | Content-Disposition
    1 | swap.keyName | Content-Description
    1 | swap.keyValue | attachment; filename="MailAttachment-1.xml"
    1 | swap.keyValue | MailAttachment-1
    Att
    Ronaldo de Moraes

  • SAP PI Sender Mail Adapter error : Unexpected User response

    Hello ,
              I developed a scenario which requires Sender mail Adapter to connect a Third party system to PI, by going thro the links .
    /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
    and PDFs in SDN.
    When configured the sender mail adapter using POP Mail Server,faced the following error:gave the correct URL and Login credentials.
    +" exception caught during processing mail message; java.io.IOException: unexpected user response; read -ERR Command is not valid in this state."+
    Then used IMAP for the same mail server : error:
    "exception caught during processing mail message; java.io.IOException: unexpected login response; read 001F BAD Command received in Invalid state."
    Tried with another Mail server :
    "exception caught during processing mail message; java.net.ConnectException: Connection timed out".
    Can you please help, what be the cause? how to rectify it?

    Hi
    There might be an connectivity issue from PI server to mail server. Please check with your BASIS to resolve the issue.,
    Regards
    Ramg

  • Sender Mail Adapter Configuration error

    Hi,
    I am working on scenario mail adapter to CRM system. And when I tried to configure the sender email adapter I have got the error following error, Can any one help me to resolve this issues
    error occured: <b>exception caught during processing mail message; java.net.ConnectException: Connection refused</b>
    the details I have provided are as follows
    Transport protocol is POP3
    URL - POP://mailservername/Inbox/folder
    And I have tried with the IMAP4 also
    URL - IMAP://mailservername/Inbox/folder
    And we have cross checked that the XI server is able to ping that particular mail server.
    Regards,
    Venkat.

    Hi Venkateswara,
    I would suggest that you go through these to know how to configure your sender mail adapter,
    <a href="/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step mail adapter step by step</a>
    <a href="/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure adapter Scenario</a>
    Also, to know the various parameters of a sender mail adapter, just go through this link,
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm">Configuring sender mail adapter</a>
    Check your mail adapter configuration against these details. Also, check if the mail server you are trying to access is running.
    Also go thru this pdf to make yourself more comfortable with mail adapters.
    https://websmp205.sap-ag.de/~sapidb/011000358700004556712005E/HowTo_Mail_Adapter2.pdf
    Regards,
    abhy

  • Sender Mail Adapter Transport Protocol as SMTP

    Hi,
    i am Working with Mail to File Scenario..
    Done with Whole Process..
    But when i m Sending a mail from SBWP... the mail was sent Successfully sent to the receptint...
    But i m not able to see my message in SXMB_MONI ... and when i check in RWB i got the following error at Sender Communication Channel..
    Can Anyone help me to fix this Error... what might be the problem ?
    1/5/11 1:20:29 PM   mail client job stopped completly
    1/5/11 1:16:27 PM   exception caught during processing mail message; java.net.ConnectException: Connection refused: connect
    1/5/11 1:11:27 PM   exception caught during processing mail message; java.net.ConnectException: Connection refused: connect
    1/5/11 1:06:27 PM   exception caught during processing mail message; java.net.ConnectException: Connection refused: connect
      1/5/11 1:06:26 PM   mail client job scheduled

    Hi Deepthi,
    Try to restart the j2ee engine , Tcode=SMICM by SAP GUI.
    hope it works.
    Also try to chk themailserver security settings , maybe XI is not able to reach it.
    Chk whether theauthentication details for accessing mail box are correct ?
    Connection refused this error generally  occurs when XI is not able to connect .
    maybe some ports are not opened on the firewall
    check if the mail server you are trying to access is running.
    just chk the below link for Configuring the Sender Mail Adapter :-
    http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm
    Regards,
    Rohit

  • Sender mail adapter error

    hi all,
    I am working on mail-mail scenario where in when i monitor my sender CC it is displaying following error:
    "exception caught during processing mail message; java.io.IOException: unexpected login response; read 001F BAD Protocol Error: "Invalid string supplied for user name".
    Please help me out in tracing the error as i am not able to trace it.
    Sender CC configurations are as follows
    >> Transport protocol - POP3.
    >> Message Protocol - XIALL
    >>URL - pop://pop.gmail.com
    >>User - [email protected]
    >>password - xxxxxx
    Thanks and Regards,
    Amit

    hi ramesh,
    I have changed user to amit.tsec and stopped and started the channel again and the job got scheduled and after the scheduling time it  shows following error :
    exception caught during processing mail message; java.net.ConnectException: Connection timed out: connect
    Please see if u have any idea on this error and can u give me the demo scenario on this sender mail adapter right from scratch i.e Data type.
    Thanks and Regards,
    Amit.

Maybe you are looking for