Sender on 6.1 receiver on 7.1

Hi,
I have a question regarding the compatibility between different versions of Web Logic to run JMS. Our current application have two sub applications both running on WebLogic 6.1 and using JMS. We are going to upgrade one sub app. with WebLogic 8.1. Is it okey to have 6.1 running on one part (JMS Sender will be on the 6.1 side) and 8.1 running on the other side (JMS queue and receiver will be on 8.1)? Is there any major issue that one needs to be careful in doing so?
Please advice..
Thanks,

Sorry...there is typo...i meant 8.1 and not 7.1 in Subject line

Similar Messages

Cant send email but can receive on Iphone 5

cant send email but can receive on Iphone 5
Says go to settings but all updated still says the same

Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more appropriate forum for your product.

HT204161 I want to use iCloud for every thing else except for Messages. I do not want to send an iMessage and receive it on both my iPhone and Mac.

I want to use iCloud for every thing else except for Messages. I do not want to send an iMessage and receive it on both my iPhone and Mac.
How do I do that?

Howdy kingtonz,
If I understand you correctly, you want to limit to limit your use of the Messages application to non-iCloud sources such as text messaging through your phone carrier, is that right?
You can turn off the use of iMessages in Settings > Messages > iMessage. See this help article -
Messages settings - iPhone
Thanks for using Apple Support Communities.
Best,
Brett L

Can send email but cannot receive on exchange account

My .mac account, gmail account, and yahoo account work flawlessly on my iphone. My work account, however, does not. My employer has his iphone working fine and my settings are the same but for some reason I can't receive email. I have no problem sending email from the account with the iphone, only receiving. Anyone have any ideas?
I have tried setting it up via the "exchange" option (entering mail servers, login, and password) and get the following:
1. Cannot connect using SSL (I proceed without it)
2. Cannot get mail. The user name or password is incorrect. IMAP support must be enabled. (which it is because my employer connects without issue).
3. I save the account despite the warnings and can send email but not receive.

I am having the same problem with both my work and Yahoo accounts. At least to the work account I am positive that the settings are the same as a co-worker using an iTouch to access his email. I have re-entered the settings a minimum of 10 times and the IT department has tried no less than 5 times. The error message remains the same. I could understand incorrectly entering the settings once or twice, but not separate people entering it 15 times. There is something else wrong with the iPhone software.

More than one sender structure assigned to receiver structure R_*

We are doing a time based reduction using TDMS 3.0.
At the phase called " assign domain rules", we get warning (not error):
"more than one sender structure assigned to receiver structure R_*".
I have searched SND and SMP, google as well but no thread is found for this warning.
How to fix this problem?
Thanks!

Hi David,
They basically are referring to some of TDMS tables where the data type of the header table is different when compared to the underlying child table. The header table refers to TDMS own table for which the data element has been deliberately changed to hold data from other tables as well. This warning will not have any effect. You can ignore them.
Regards
Niraj

I shattered my iPod and wont work. How do i send it in to receive a new one?

I shattered my iPod and wont work. How do i send it in to receive a new one?

Since I have no idea which country you are in, I suggest you click on the Store button at the top of this page and then go to your country's store. There, you can find the prices of each and every model of iPod Touch in your country's currency.
16GB - £199
32GB - £249
64GB - £329
By all means take your broken iPod into an Apple store and see if there is any discount they can offer you.

Since upgrade to Yosemite, whenever I send an Email, the receiver sees it as coming from my wife only in the "From" column regardless of which signature I use. How do I change this?

I recently upgraded to Yosemite.
When I send an Email, the receiver sees that it comes from my wife in their "from" column
We have separatee signatures that I can chose from and our Email account is identified with both of our names.
How do I change this so that when I send something, the receiver knows it is from me and not from my wife.

It may be that you have more than one outgoing mail account, and you're sending from the wrong one. From the Mail menu bar, select
          Mail ▹ Preferences...
The Mail preference dialog opens. Select the Composing tab from the row of icons at the top. From the menu labeled
          Send new messages from:
choose
          Account of selected mailbox
Note that this setting may have no effect if you start a new message while a VIP or smart mailbox is selected in the mailbox list. Those are saved searches, not actual mailboxes.
If the problem remains, select the Accounts tab in the preference dialog, then select the affected account in the list on the left.
In the Account Information pane, select the correct server in the menu labeled
          Outgoing Mail Server (SMTP)
If there's only one server in the menu, select
          Edit SMTP Server List...
and add a new server with the correct settings. If you're not sure how to do that, try the Mail Settings Lookup.
Another possibility is that the wrong card in your address book is selected as yours. Select your card in the Contacts application. Then select
          Card ▹ Make This My Card
from the menu bar.

Condition check (based on sender file name) at receiver determination step

Hi,
My scenario is File to AS2 (Sender side file adapter and receiver side AS2 adapter)
We have 5 customers, but the source location is same to pick the files, Here we are not using any ESR objects.
Based on the source file name PI need to determine to whoom this file need to send at receiver determination step
Craeted objects
1 Sender CC,
1 Sender agreement,
1 Receiver determination
5 Interface determinations
5 Receiver agreements
5 Receiver CCs.
Could you please provide me your valuable inputs.
Thanks
Ramesh

Hi Venkataramesh,
I understand your scenario as, picking files (different file naming standard for different target customer) from one source folder. Based on file name, that payload should be sent to corresponding target customer. You have mentioned u201CHere we are not using any ESR objectsu201D. I can see two reasons for this decision
1. PI is used to route the messages, i.e., no need to transform the payload. OR
2. Files can binary files like PDF, ZIP, JPG, GIFu2026
Now I can see two possible solutions
1.     Simple solution, as proposed by u201CPrabhu Rajesh Janardananu201D, make it into 5 different scenarios (5 sender channels).
2.     Bit complex solution, only one sender channel, using extended receiver determination
Step 1:- In Sender File channel check u201CAdapter u2013 Specific Message Adapteru201D in Advanced tab. File Name should be checked.
Step 2:- In Receiver Determination, Select Type of Receiver Determination as u201CExtendedu201D. http://help.sap.com/saphelp_nwpi711/helpdata/en/48/ce2a423a8e5430e10000000a42189b/frameset.htm
Step 3:- Do a Graphical Mapping (use it Operation Mapping in Receiver Determination).
Step 4:-
Source and target of graphical mapping will be same (below), because you donu2019t want to access input payload (it can be XML, flat file, JGP, GIF and you donu2019t have its structure).
<Receivers>
   <Receiver>
      <Party agency="" scheme=""></Party>
      <Service></Service>
   </Receiver>
</Receivers>
Step 5:- Write a UDF in Graphical mapping as below. http://help.sap.com/saphelp_nwpi71/helpdata/EN/43/03612cdecc6e76e10000000a422035/frameset.htm Pay attention to method declaration
public String Determine_Receiver( Container container) throws StreamTransformationException
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(u201Chttp://sap.com/xi/XI/System/Fileu201D,u201CFileNameu201D);
String valueOld = conf.get(key);
//Put your logic here
if (valueOld.equal(u201Cuser1u201D)) {
return u201Cuser1u201D;}
if (valueOld.equal(u201Cuser2u201D)) {
return u201Cuser2u201D;}
if (valueOld.equal(u201Cuser3u201D)) {
return u201Cuser3u201D;}
Step 6: Now use this UDF to map to u201CReceiveru201D and u201C Serviceu201D.
This solution need more fine tuning.
Regards,
Raghu_Vamsee
Edited by: Raghu Vamsee on Jan 8, 2011 5:56 PM

On a new mail message in Yosemite there is no Send button or icon. Only a grayed out word that says "send. I can receive mail but not send because nothing at top of email allows sending

On a new mail message in Yosemite there is no Send button or icon. Only a grayed out word that says "send. I can receive mail but not send because nothing at top of email allows sending. Please help. This is true of two .me accounts I have.

Hi,
It may pay to send a Screen Shot of the Connection Doctor info. (see the Window Menu)
It would seem the IMAP or POP side is logged in bit the out going STMP server is not.
8:27 pm Monday; December 22, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

PI 7.1Error between the sender interface and the receiver (abstract)interf.

Hi all,
I have been receiving an error in configuring the step of type receiver (BPM). More exactly I receive the following error message about the pipeline to the adapter between a third-part sender and a BPM receiver. The sender interface does not known the receiver interface.
BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any help will be well appreciated.
Many thanks in advance for your kind support.
Regards,
Giovanni

looks like message interface is not able to identify by the integration engine ,Check that the interface name and namespace of sender are coming as of expected
if not this provide more details
Rajesh

Mail Sender to Abap Proxy Receiver with Attachements

Hi All,
Scenario: I need to create a ticket in Solman from a mail. I intend to do the scenario as Mail sender to Abap Proxy receiver asynchronous.
I have configured my sender mail adapter and am able to get the mails in XI. The attachements also appear in Inbound payload as MailAttachement-1, MailAttachement-2 etc. I have checked use mail packege and keep attachements in sender adapter.
Transport Protocol: IMAP4
Message Protocol: XIPAYLOAD
Queries:
1. My Inbound Data Type is the mail Package -- ximail30_xsd. Here in sxmb_moni I can see the mail attributes like from, to and the mail body in content. But How can I read the attachements in my message mapping.
2. How can I pass these attachements to Abap Proxy ( I do not need to alter attachments only pass to proxy ). These attachements have to be attached to the Solman ticket in SOLMAN server.
Appreciate your kind response to my above queries.
Thanks.
Regards,
Siddhesh S.Tawate
PS: I have tried using PayloadSwapBean in adapter module but still the content at source remains same.

Hi,
Please find below the part of code that might help you. I have given code only responsible for attachements part of the ticket.
loop at lt_attach into l_attachment.
        count = count + 1.
        if count = 1.
          first_line = 1.
        endif.
        l_type = l_attachment->GET_CONTENT_TYPE( ).
        split l_type at '"' into l_type
                                 file_name
                                 l_name.
        l_name = file_name.
        split file_name at '.' into file_name
                                    file_type.
        l_xstring = l_attachment->GET_BINARY_DATA( ).
        strlen = xstrlen( l_xstring ).
        Compute int = ( strlen div 255 ).
        Compute rem = ( strlen mod 255 ).
        if rem <> 0.
          int = int + 1.
        endif.
        count1 = int.
        if count = 1.
          last_line = count1.
        else.
          if int = 1.
            first_line = last_line.
          else.
            last_line = first_line + count1.
          endif.
        endif.
        wa_APPX_HEADERS-APPXNO = count.
        wa_APPX_HEADERS-DESCR = l_name.
        wa_APPX_HEADERS-FILETYP = file_type.
        wa_APPX_HEADERS-FILENAM = l_name.
        wa_APPX_HEADERS-FILEFM_UL = 'BIN'.
        wa_APPX_HEADERS-FIRSTL = first_line.
        wa_APPX_HEADERS-LASTL = last_line.
        wa_APPX_HEADERS-FILELEN = strlen.
        wa_APPX_HEADERS-LAST_USR = sy-uname.
        GET TIME STAMP FIELD wa_appx_headers-TIMESTAMP.
        append wa_APPX_HEADERS to it_APPX_HEADERS.
        while count1 <> 0.
          count1 = count1 - 1.
          if count1 <> 0.
            wa_APPX_LINES_bin-LINE = l_xstring+0(255).
            shift l_xstring left by 255 places in BYTE MODE.
          ELSE.
            wa_APPX_LINES_bin-LINE = l_xstring.
          endif.
          append wa_APPX_LINES_bin to it_APPX_LINES_bin.
          clear: wa_APPX_LINES_bin, wa_APPX_LINES.
        endwhile.
        first_line = last_line + 1.
        clear: strlen, count1, file_name, file_type, l_type, int, rem, l_xstring, l_attachment.
      endloop.
CALL FUNCTION 'BAPI_NOTIFICATION_CREATE'
        EXPORTING
          NOTIF_EXT                = wa_NOTIF_EXT
        NOTIF_CRM                = wa_NOTIF_CRM
IBASE_DATA               =
     IMPORTING
       NUMBER                   = Refnum
       NUMB                     = Numb
       REFNUM                   = Ticket_No
       SYSID                    = SYSID
        TABLES
          NOTIF_PARTNERS           = it_NOTIF_PARTNERS
        NOTIF_NOTES              = it_NOTIF_N_EXT
          NOTIF_SAP_DATA           = it_NOTIF_SAP_DATA
        NOTIF_TEXT_HEADERS       = it_NOTIF_TEXT_HEADERS
        NOTIF_TEXT_LINES         = it_NOTIF_TEXT_LINES
        APPX_HEADERS             = it_APPX_HEADERS
        APPX_LINES               = it_APPX_LINES
        APPX_LINES_BIN           = it_APPX_LINES_BIN
         RETURN                   = RETURN
Please observe how first and last line of attachement is calculated. That is what created problem for me initially.
Hope this helps.
Regards,
Siddhesh S.Tawate

Soap Sender and RFC Adapter receiver getting APPLICATION_ERROR

Hi, all,
I have a webservice soap sender and RFC Adapter receiver scenario, it works fine with RFC "RFC_SYSTEM_INFO", When i tried the RFC "RFC_READ_TABLE", getting the following error message, <SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code> in
SXI_MONITOR, in webservice client, i am getting error message like this:
<faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <rfc:ZZTEST_RFC_READ_TABLE.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
               <Name>TABLE_NOT_AVAILABLE</Name>
               <Text>QUERY_TABLE not active in Dictionary</Text>
            </rfc:ZZTEST_RFC_READ_TABLE.Exception>
Thanks a lot!

Hi
Its not compulsory but its good to wrap it as Z object.
Well if you are facing problem with SOAP data. Then try to do one thing. Check with the data you received from SOAP message. If this works
Then try to check in mapping is it passing the data correctly or not. With this check with the user authorization PIAPPLUSER. if its having less authorizations to execute this BAPI in ECC
Thanks
Gaurav

I upgraded to lion today and just realized I am not receiving any mail. I can send out but not receive. i'm using a POP Road Runner account. Any help appreciated.

I just upgraded to Lion today and realized I'm not receiving any mail. I can send out but not receive. I am using a POP server Road Runner acct. Any help would be appreciated.

Try Mail->Window->Connection Doctor. If there is a problem reported, try:
Open Mail->Preferences and check your settings.
If you still have a problem, Copy your settings (screen capture ⇧⌘4), delete account, and re-setup account

How can we confiure idoc in same client sender as well as receiver

HI Gurus,
How can we create the ale/idoc within the same client, sender as well as receiver.
can u give me step by step procedure.
thanks in advance.

Hi kumar,
see this links these may help u.
http://help.sap.com/saphelp_nw04/helpdata/en/90/c4b523c4c411d2a5ee0060087832f8/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/201769e0-3174-2910-e287-baa58d198246
Go through the following Tcode for ALE
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
1)EDI
Electronic Data Interchange
Cross-company exchange of electronic data (for example business documents) between domestic and international business partners who use a variety of hardware, software, and communication services. The data involved is formatted according to predefined standards. In addition to this, SAP ALE technology is available for data exchange within a company.
2) ALE
A means of creating and operating distributed applications.
Application Link Enabling (ALE) guarantees a distributed, but integrated, R/3 installation. This involves business-controlled message exchange using consistent data across loosely linked SAP applications.
Applications are integrated using synchronous and asynchronous communication - not by using a central database.
ALE consists of the following layers:
Application services
Distribution services
Communication services
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
Regards,
karthik

R3 (rfc-sender) - XI - Webservice ( soap-receiver)

Hi,
I am getting below error whenever webservice(target system) is unavailable.
HTTP 404 Not Found
Then RFC got failed in R3, due to this error in XI
R3 (rfc-sender) <-> XI <-> Webservice ( soap-receiver) Synch
User will enter the request data in R3 and waiting for the response, but webservice is down(i.e not available)
Request is reached to XI box and XI is trying to send data when webservice is down( i,e not available), RFC is waiting for the response from XI box.
how we will handle this kind of situation,how should i give response back to RFC( because RFC sent the request and waiting for the response, XI could not send any response back as Webservce is down, Please advice me how should XI inform to the end user r R3 abt webservice.
I am getting this error to my mail box as i have configured ALERTS. i do not want to change existing RFC.
is there any chance to send response to R3 even webservice is down, please can any one suggest.
Thanks,
SIva
Edited by: Siva Grandhi on Jun 18, 2008 1:12 PM

Hi siva,
check this blog on HTTP errors.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
May be the URL you have given in SOAP at receiver adapter is wrong.Check that once.
Error: 404 Not Found
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
u2022 404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
u2022 Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
u2022 If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
u2022 If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
Thanks,
Vijaya.

When sending a text it sends but then i receive the sent message as a reply

when sending a text it sends but then i receive the sent message as a reply

Settings > Messages > Send & Receive > Start New Conersations From
Tap whichever on you want to use.

Sender on 6.1 receiver on 7.1

Similar Messages

Maybe you are looking for