Sender option grayed out in IDOC Adapter PI 7.1

Hi All,
I have heard of IDOC packaging in the PI 7.1 for which we need to create a sender channel in XI and sender agreement.
but the idoc adapter has the sender selection grayed out. Is there any other configuration which needs to be done.
Rgds
Aditya

Hi,
yes you have missed something - exactly what i am not able to guess.........just check whether the SAP BASIS 7.10 component was correctly deployed in your PI 7.1 system because without EHP1 also, at least you should be able to configure sender IDOC adapter............
maybe you need to do the readiness check of your PI 7.1 system again.........try restarting your PI server completely and then check if there is any error in the startup logs.........if there is no error, then again try to configure sender IDOC comm channel in ID.
Regards,
Rajeev Gupta

Similar Messages

  • Trying to delete pages 21-24 on iPhoto book but "remove pages" option grayed out and pressing delete button not doing anything.  Help!

    Trying to delete pages 21-24 on iPhoto book but "remove pages" option grayed out and pressing delete button not doing anything.  These extra pages resulted from using Autoflow and now we can't seem to get rid of them.  Help!

    Good morning Old Toad.
    I did as you suggested:
    1) Booted from install CD.
    2) Ran Disk Utilities on internal hard drive--no repairs necessary. For good measure, did the same thing on external drive. Also no repairs necessary.
    3) Checked software update--no updates found. About this Mac said I was already running 10.4.7. For good measure, I downloaded the latest and installed it. Since it let me run the install, I'm not sure if I installed something new or reinstalled what I already had.
    4) I rebooted from CD, ran disk utilities, ran repair disk--no repairs necessary. Repaired permissions and a lot of permissions repaired.
    5) Tried to delete the files and the same old thing happened: kernel panic. The specific message:
    panic(cpu 0 caller 0x00102A08): jnl: transaction too big (1587712 >= 1572352 bytes, bufsize 8192, tr 0x29f1fb0 bp 0x2801de40)
    So there's no change in my status.
    I'm trying to delete the files because:
    A) They already take .5 Gb.
    B) I can't get rid of them ever. If I move the problem files to a different folder, I can only do one successful drag-and-drop backup to the external drive until the "new" thumb segments become unerasable just like the previous versions and crash the system.
    C) I can't even "just" drag and drop every file/folder except the thumbs, because that ends up crashing the system as well. So I have to drag and drop every file/folder in the iPhoto hierarchy individually. Which makes me less inclined to backup, which defeats the purpose of a backup.
    D) After the iPhoto fiasco I'm just crabby about all the Apple screw-ups I'm experiencing and I want to get them fixed.
    Thanks for your help. Any additional suggestions would be appreciated.
    G4   Mac OS X (10.4.6)  

  • Why is the email option grayed out from iphoto sharing

    I am running iPhoto 9.5.1 on Mavericks.  When I select a photo and try to share it the share menu has email and all the social meida options grayed out.  Checking accounts in iPhoto my email accounts are there.  I tried deleting and reinserting the one I want to use and restarting iPhoto, but it is still grayed out.

    You need to update yoru profile - it says OS X 10.6.8
    In the iPhoto preferences select an email client (I personally prefer Mail) and if you are using iphoto enter your email information in teh accounts tab (If you use Mail it will use yuro existing sset up)
    Same for social media - enter your account information in the accounts tab
    LN

  • IMovie 9.0.4, all export options grayed out.  Have I missed a step?

    I'm still on OS 10.6 so I can't udate iMovie software.  I have a little movie, under 4:00, finished and want to export but all options grayed out.  Have I missed a finishing step or is this just an obsolete software/OS problem?  Thanks.  Chris

    I'm still on OS 10.6 so I can't udate iMovie software.  I have a little movie, under 4:00, finished and want to export but all options grayed out.  Have I missed a finishing step or is this just an obsolete software/OS problem?  Thanks.  Chris

  • Why are the options grayed out??

    Why are the majority of my edit options grayed out.  I cant copy and paste

    OK. So we've established that you're in Photoshop CC on Windows 7 (nothing to do with Acrobat or Acrobat Reader).
    What exactly are you trying to do in Photoshop CC? Can you outline in detail what steps you're taking and what's confusing you?

  • Scripe error ? option grayed out

    I
    I When I go to edit my page an alert pops up ... an error has occured in the scripe on this page . What does this mean and what is it doing to the program or preventing me from doing ?
    I have a lot of options grayed out and not able to use when editing or making new pages? <<  highlight color, change text color, change size, change fonts. >> resizing images, page properties 5 out of 7 options grayed, etc. ... I checked under Administrators and all there looks okay and I am the only one using the program. I have gone to the Administrator Settings, then styles/fonts/size and all check for my use.
    OOnly on two of my main pages are all of the options available to use on either a New or Edit page but none are available on the other tabbed pages of my website. Even if I cut and paste a document the color, size and font changes to what is on the page.

    Don't make a text selection, but simply put your text cursor in the text with the new formats. Most likely, you have a mix of character formats selected.

  • Paste as Background option grayed out

    I'm using Captivate1. When I edit a slide, I select Copy
    Background, edit it in Paint, copy it from Paint and try to Paste
    as Background into Captivate. The Paste as Background option is
    grayed out. It doesn't happen all the time. Sometimes I have to
    close the project and reopen it and the option is working. This
    time it doesn't work. There's nothing in online help about this so
    I hope someone in the forum might shed some light on this.
    Thanks.

    I started tracking what I was doing before the graying out
    occurred. It seems like if I copy and tweak (in Paint) more than 8
    or so backgrounds in a row, then the Paste as Background option
    grays out. It's like the system is tired of me copy and pasting
    back into Captivate. When I shut everything down and reopen it,
    then the paste memory clears and the option is available. Now by
    all means, this is not a technical explanation for what happens,
    but it's just what I'm observing.
    And yes, I'm patiently waiting for the powers that be to
    approve my upgrade to Cap2.
    Thx

  • Sip dialer port export option grayed out in configuration manager ucce 10

    Hi,
    I am configuring the outbound option for ucce 10, when i configure the sip dialer port (dialer conifguration) in conifiguration manager, i just added 5 ports, i can see this ports showing in dialer process on the PG, but i need to export this ports to Unified communication manager, i could not able to export it because this option grayed out (i did select all, or individual selection both are having export option grayed out)
    Any idea?
    with Regards,
    Manivannan

    Exporting port configuration is only allowed for SCCP, in SIP Dialer Deployment its actually not needed and that why its grayed out.
    //but i need to export this ports to Unified communication manager//
    in Sip Dialer you don't need to create any Port For Dialer under CUCM. its only required in SCCP.
    Sip Dialer port Directly registers with VG.
    regards
    Chintan
    ~please rate if helpful

  • ICloud email won't send (it tries to send and then freezes, send button grayed out)

    I can recieve email just fine. I can draft an email just fine. But it won't send.  When I hit the send button, the email window goes away and a message box appears and disappears so fast I can't read it.  The email window reapears with the "send" button grayed out.  Once this happens, I can't close the email window.  I have to quit mail.  When I open mail back up, the email will still be there and I can close it.  The send button is no longer grayed out, but if I hit send, the same thing happens (i.e., screen flashes and the send button is grayed out).
    I've tried deleting the acouunt and reforming it.  Didn't help.  I checked to see that my outgoing server is "iCloud" and that it send on port 993 and the SSL check box is checked. 
    Any ideas?

    I'm having the exact same problem on one of my Macs but no the other.
    Did you ever get this resolved?

  • RFC Sender - Sender option greyed out

    I am trying to configure the communication channel for RFC_sender.  I have completed the steps as per Michal's blog - created RFC destination in my R/3 system, registered the program etc.
    My problem occurs when creating the communication channel.
    As soon as I select RFC as the adapter, the Sender option is greyed out and only the Receiver option is active. 
    Any insights into why this is the case would be very helpful.
    Regards,
    Jill

    Ji Jill,
    >>I'm not really sure how I go about that. I have tried this scenario on both our 4.6C system and our 4.7 system
    You need to download the tpz file from service.sap.com and place it in your import directory and import the component in your IR.
    >>When we created these systems as technical and business systems it includes the basis components
    It is not there because you have created tech or buss. systems, it is there only coz you or some of your BASIS team member have imported the content into IR.
    Now you dont need to delete it and reimport it. Just place the tpz file on the import directory and import it. This will over write the previosly present conetet.
    >>When I select any of the following adapter types the Sender is greyed out:
    RFC
    HTTP
    IDoc
    XI
    Note for HTTP and IDOC you dont have a sender communication channel.
    Also you dont need XI sender communication channel for ABAP proxy, not sure about JAVA proxy.
    Regards,
    Jai Shankar

  • Publish a book to iWeb - option grayed out

    I created a book in iPhoto that I want to publish in iWeb. The share -> send to iWeb options are grayed out. Only with books. It works if I send photos.

    I don't think iPhoto will do exactly what you intend. You can 'share' a "Photo Page" with iWeb, then that's viewable as a slideshow, or you can 'print' a 'book' in iPhoto, but create a PDF file in the Print dialog window. Then you can upload the PDF file and link to it on your iWeb page.

  • IMovie '08 Clipping Options Grayed Out - How Do I "Trim"

    I have successfully imported a variety of HD video content / events from my Sony camera. I can view it, select portions of it and drag it into the project window, etc..
    However, I've got all this extra content stored in events that I want to delete so it's not taking up space on my hard drive. When I select an clip in the library, the "trim to selection", "split clip", etc. options are all grayed out.
    How do I do this very simple task?

    OK, I think I figured it out - was not very intuitive though... But I still have a question..
    Basically, what it looks like I need to do is to "select a clip in the event section" and then "reject it". I can then "send rejected clips to trash" which I believe deleted the content from my hard drive..
    One question about this..
    If I "reject" some content, is there any way to "un reject a portion" without using "undo"? For example, say that I select some unwanted content here and some unwanted content there and then decide that I want to keep a sub clip within one of the clips that I rejected. How can I select that clip and "unreject it". I was able to apple-z to undo ALL my rejections, but that's not exactly what I'm trying to do.
    Any ideas?
    Message was edited by: egoldy

  • IChat: Many options grayed out.

    Hello!
    For some reason, many options within iChat are blocked out for me. Please note that I am the only user with access to my computer, so it's not that I'm on a different account. In "Preferences," there's no "Security" tab like I've read up on. If I right-click a buddy in my buddy list, all options are grayed out save for: Invite to Chat, Send a Message, Send File, Show Info, Search in Spotlight. If I want to block someone, I cannot do so through that menu nor the "Buddies" menu at the top of my screen. Nearly everything is grayed out as before, including Block Person, Ignore Person, and Request Authorization.
    However, on other accounts (i.e. my AIM name), I can block people. I'm using GoogleTalk through iChat, which is where I am finding troubles with this. Are my problems common?
    Any help would be appreciated. Thank you!
    -- Sarah
    Notes ~
    iChat Version 4.0.5 (608)

    Hmm. Apparently, to solve this, you need to sign into GoogleTalk directly. You cannot "block" or "unblock" people on GoogleTalk through iChat. Makes sense.

  • Time Machine not backing up 2nd external drive, remove option grayed out

    I have two external hard drives, 300gb (firewire) and 500gb (usb). Time Machine is backing up to the 300gb. In Time Machine's options, the 500gb is excluded from being backed up, and the remove option is grayed out.
    The 300gb Time Machine Backup drive is formatted as Mac OS Extended. The 500gb drive is formatted as MS-DOS (FAT32).
    I know the backup drive needs to be formatted as Mac OS Extended, but will it not even back up other drives that are FAT32?

    I am having a similar problem. I initially set it up 3 days ago and had it back up just the iMac to Time Capsule (about 120 GB) which it did no problem (I initially had my LaCie drive excluded). I then un-excluded my other drive, where all my photos and music reside (about 130 GB). Since then, it keeps trying to back up about 102 GB each time. Looking at the list of backups it does not appear that it has ever successfully backed up the LaCie. I am not aware of any error messages, but I have not been home much. I normally shut down the computer at night but I have been leaving it on trying to let Time Machine do its thing. All I can say is that every time I am at the computer TM is running and it always looks like it is in the middle of backing up 102 GB (usually seems to be near the beginning, never seem to see it more than halfway done). Looking at the TM panel it says the latest backup was 2 days ago. I'd appreciate any advice!

  • "Recognize Text Using OCR" Option Grayed Out in Acrobat 9 Pro (9.5.1)

    Running Adobe Acrobat 9 Pro.  I'm working with electronically filed court documents.  I regularly use the OCR tool (Document -> OCR Text Recognition -> Recognize Text Using OCR...) on these court documents.
    Problem is, every once in awhile, I'll run into a document where the "Recognize Text Using OCR" option is inexplicably grayed out.  I have no idea what is causing this.  I have checked the Document Properties and confirmed there are no security restrictions for the document.  It happens inconsistently, in that OCR will work with a document filed by an attorney in one case, but it won't work in the same kind of document filed by the same attorney in a different case.
    Any help getting OCR to work on these few rogue documents is appreciated!

    Form created with LiveCycle Designer are XML forms in a PDF wrapper and many of the usual PDF properties are not available. This is like embedded rich media in a PDF. If you want to research this, Adobe and ISO have the PDF Reference manual available as a free download.

Maybe you are looking for