Sender Radio Button disabled for Idoc adapter

If u clearly observe .......
Whats the necessity or significance of not having a sender communication channel(sender side radio button is disabled) and sender agreement in scenarios pertaining to Idocs....

Hi Deepika,
Just think that IDOC adapter as a sender, that means, you are getting source file (IDOC) from R/3 (SAP) system definitely. And XI is also and SAP system. As both are SAP systems, we already have a way of establishing the connection between SAP systems, which is ALE configuration. Using which, you can easily transfer IDOC from R/3 to XI.
Also, you might know that IDOC and HTTP adapters reside on ABAP stack. When the R/3 and XI configuration settings are done, XI can receive the IDOC sent by R/3, directly to Integration Engine instead of Adapter Engine. If the file initially reaches to Adapter Engine, then the details about sender application are necessary, that means the Sender Agreement. But in this case, you don't even need the Sender Agreement.
I hope you understand why the IDOC sender button is disabled and sender agreement is not necessary.
Thank you.
Regards
Bhanu
Intelligroup.

Similar Messages

  • QoS for IDOC adapter

    Hi all ,
        what are the QOS available for idoc adapter
    Regards,
    Tarang

    Hi,
    Check on this:
    <i>The quality of service EOIO (Exactly Once In Order) must be specified in the message header.
    The receiver system or the sender system must be based on SAP Web Application Server 6.40 or higher.
    If this is not the case, the quality of service is automatically changed to EO for compatibility reasons and the message is processed accordingly.</i>
    http://help.sap.com/saphelp_nw04/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/content.htm
    Regards
    Vijaya

  • SA PI 7.1 EHP1 - Support for IDOC Adapter using AAE

    Hi,
    Can anyone confirm if the SAP PI 7.1 EHP1 supports the IDOC adapter in the AAE ?
    Cheers
    Colin.

    Hi Colin,
    I am workinngt on EHP1 PI7.1,but no support for IDoc Adapter in the AAE.
    The new features added for IDoc adapter is IDoc packging and new conversion module added .
    we have to wait till next release,but not sure...
    Regards,
    raj

  • Spry Radio Button widget for CS3

    Hi,
    I can't seem to find a definitive answer if the Spry Radio Button widget for CS3 is available or not. The help menu says that it's there, but I can't find it. I've updated my Spry and checked the web and can't find an answer. Can anyone help me out?
    Thanks!

    I can't remember that far back, but if you cannot find i, then you may be right; it's not there. CS5 has it located on the insert bar as follows
    but you can aslo go to the Insert Menu, Insert->Form->Spry Validation Radio Group.
    Cheers,
    Gramps

  • Sender option grayed out in IDOC Adapter PI 7.1

    Hi All,
    I have heard of IDOC packaging in the PI 7.1 for which we need to create a sender channel in XI and sender agreement.
    but the idoc adapter has the sender selection grayed out. Is there any other configuration which needs to be done.
    Rgds
    Aditya

    Hi,
    yes you have missed something - exactly what i am not able to guess.........just check whether the SAP BASIS 7.10 component was correctly deployed in your PI 7.1 system because without EHP1 also, at least you should be able to configure sender IDOC adapter............
    maybe you need to do the readiness check of your PI 7.1 system again.........try restarting your PI server completely and then check if there is any error in the startup logs.........if there is no error, then again try to configure sender IDOC comm channel in ID.
    Regards,
    Rajeev Gupta

  • Port Settings for IDoc Adapter

    Hi All,
    Our scenario is like this ERP -> XI -> File. ERP sends IDoc to XI. I have a couple of questions.
    1. In the control part of an IDoc, there's a sender partner number and sender port. What are they used for? As I understand, the partner and port represent the destination of the IDoc instead of the source. Why is there sender port and partner?
    2. We need to maintain port using IDX1. Should I set the name of the port to be the same as the sender port of the IDoc?
    3. I didn't configure the scenario and the IDoc sender adapter. If the ERP system sends IDoc to XI, can I find it in t-code IDX5?
    Best Regards
    Jerome

    Hi Jerome,
    1. Sender Partner and Port :  The control record should have sender port and partner number. This will be used by the receiver system (i.e., XI system). Because, receiver system should know from which system this IDoc is coming using Sender Partner number. This partner number should be same as Logical system name in Sender Business system which is configured in SLD.
    The sender port should be SAP<Sys-id of sender system>
    and sender partner number should be <sys-id of sender>CLNT<client number of sender>
    2. The port created in IDX1 will be used for importing IDoc's metadata in XI system from R/3. IDoc metadata is needed by IDoc adapter to convert incoming IDoc to IDoc-XML format.
    It is mandatory to have same name for Port in IDX1 and sender port of the IDoc's control record.
    3. I think the IDoc wont be listed in IDX5 if scenario and IDoc adapter are not configured. IDX5 displays inbound and outbound IDocs in the IDoc adapter.
    Regards,
    Uma

  • Radio Button disable/enalbe

    Hi Experts,
    I made a radiobuttonbykey in my application and have 4 options.
    I want to disable and enable the options according to selection made on a dropdown.
    For example
    if i choose option 1 from dropdown then 2 options of radiobutton become enable and rest disable
    if i choose option 2 from dropdown then 3 options of radiobutton become enable and rest disable
    and like that...
    I am able to disable/enable the whole radiobutton but i want its options to be disabled or enabled.
    Regards
    Rajat

    Hi Rajat,
    I understand your problem is that using radiobuttonbykey UI element, you can set the enabled property on/off for the entire value set, and not for individual values.
    Is it ok to use radiobutton UI element for your requirement? Or is it that you are using some domain fixed values or value table as the value set for the radiobuttonbykey?
    Depending on this, you can select one of the two alternatives:
    1) If its ok to use radiobutton UI element, then there can be four different radiobutton UI elements bound to the same context. At runtime, the context will hold the key specified for the selected radiobutton. And here you can bind the visible/enabled property of the four diff radio buttons to a boolean context and can change it as per your requirement.
    2) Incase you need to use radiobuttonbykey UI element, then bind the context dynamically through coding to the radiobuttonbykey. OnSelect event of the dropdown, you can define an action wherein you update the value set of the context bound to the radiobuttonbykey.
    Incase of queries please revert.
    Regards,
    Chitrali

  • Send Timesheet Locked/Disabled for Resource

    A resource's timesheet has been disabled/locked in the periods that he's missed. He did not have this issue about two weeks ago submitting missed timesheets. As of today, the send timesheet button is disabled/greyed out. The send status however is available.
    I tried deleting/recreating timesheet but still does not work on all of them. Please note that when I recreate the timesheet it automatically adds the 40 hours for the week, is that normal? I have checked and periods are OPEN for these weeks. I am running
    out of ideas of why this is causing his timesheets to not send. A while back, he had an error on a timesheet that I recently rejected and deleted/recreated if that provides any hints. 
    Regards,
    John
    Johnny Eltawn, Project Server Admin

    Seems this is bug in MSPS 2013, you can Recall TS to
    Identify
    Assignment rejected task
    by process status as "Rejected" and the it's cells in the Task Entry
    grid would be read-only, As temporary workaround you can select that task and
    click on “Remove Task” from option Ribbon.
    Now you would be able to submit timesheet without any error.
    Hope this will help you
    Raushan Kumar |LinkedIn

  • Dynamic radio buttons in for loop

    Hello,
    what i am trying to do is create several radio buttons in a while loop, then assign an action listener and also some text to them. After doing this i want to add the radio button to a panel, so far i have the following code:
    JPanel content = new JPanel();
    for(int i=0;i<a.size();i++){
        JRadioButton radio = new JRadioButton("Radio" + i);            
        // code to add an action listener to go here
        content.add(radio)
    }Many thanks in advance for some help.

    Encephalopathic wrote:
    psamatt wrote:
    Thanks DrClap, this is the sort of post that i was awaiting on :)and you'd have gotten that a lot sooner if you had asked a clear question in the first place. Much luck.Sometimes I think this forum is providing a basic service: teaching people how to ask questions. If they finally learn, the scales fall from their eyes and they cry with joy, "now I see, I can't merely say 'i'm doing this thing like and it's not you-know. What should I do or whatever?' I actually have to be clear and not assume the person I'm talking to is a mind reader! What wasn't I taught this at University?

  • Empty payload for idoc adapter

    Hello,
    I have a file to idoc scenario with an xslt mapping. Normaly after the mapping the idoc looks like:
    <wpwuw>-
         <idoc>...</idoc>
         <idoc>...</idoc>
    </wpwuw>
    Because of the business requirements in some cases the mapping should not generate an idoc. That means I have to create an empty payload.
    The problem is that the idoc adapter creates an error for all kinds of empty messages.
    a) empty payload
    b) empty trading segment  ( <wpwuw></wpwuw> )
    c) empty idoc segment  ( <wpwuw>-<idoc/>-</wpwuw> )
    Any idea what I can do not to get an error from the idoc adapter ?
    Regards Bernd

    HI
    instead of creating empty paylaod. Use conditional(enhanced for mapping & standard for condition on Xpath) receiver determination for this and dont generate IDOC for the specified conditions.
    Thanks
    Gaurav

  • Error when Loading Metadata for IDOC Adapter

    Everybody,
    I know this should be pretty straight forward and that there are a few posts about it.  But following the Demo 3.0 guide and the posts I can't seem to load the data into the IDOC Adapter.  I did every step in the guide and when I try to execute IDX2 for the source port I previously created I get the error "No RFC Destination is maintained  for the port".
    Following the guide I have my XI host
    ID:ABC
    Instance:01
    Client:700
    Executed IDX1 and got port SAPABC_107 with RFC Dest-ABC_107, which I defined previously with transaction sm59 and the test came back ok.
    When I try to execute IDX2 I get the error message...
    What am I missing ?????
    Thanks!
    Diego

    Everything was setup before (by following the XI 3.0 Demo guide) here are the steps I did:
    1. Setup an RFC R/3 Destination on my client 107 (American Airlines) to client 700 (my XI): ABC_700
    2. Setup an RFC R/3 Destination on my client 700 to client 107: ABC_107
    3. Setup the IDOC processing port "SAPABC" on client 107 with RFC Destination ABC_700.
    4. Define partner type LS for logical system ABCCLNT105 (Airline Lufthansa)
    5. Define partner type LS for logical system ABCCLNT700 (XI)
    6. Specified the ALE distribution model in client 107.
    7. Execute IDX1, I input the SAPABC port created in step 3, input the client number 107 and the RFC destination ABC_107 created in step 2 and save.  The result is port SAPABC_107.
    AND..!! where the error occurs:
    8. Execute IDX2 input port SAPABC_107 and idoc type and get the error message "No RFC Destination is maintain for SAPABC_107"
    Any ideas !?
    Thanks
    D
    The client 107 represents the Airline American Airlines and has a R/3 RFC Destination to client 700, my XI.  The same way my XI has an R/3 RFC Destination to client 107.

  • Share button disabled for I cloud

    Share button disabled on I cloud. Can't share video in message.

    Ellen...
    Try resetting the iPad then try again.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    Apple - iCloud - Learn how to set up iCloud on all your devices

  • Authorization for RFCUSER for IDOC adapter

    Hello,
    who can tell me, which authorizations the RFC User must have I want to use for the IDOC adapter.
    I have the problem, that I can not download the idoc definition into IDX2. Error: "No RFC authorisation..."
    Is there a list of authorization this user MUST have.
    best regards
    Werner Magerl

    Hi,
    The thread speaks of the same issue.
    User abcd has no RFC authorization for function group SYST
    If it's of any help.
    regards
    Vijaya

  • Required Enhancement Package for Idoc Adapter in Java

    Hi experts,
    I just would like to know which Enhancement Package I need for PI 7.1 when I want to have the Idoc adapter to be implemented in Java and not only in ABAP.
    Thanks and regards.
    Oliver Vöpel.

    I talked to someone from the SAP development. They told me it will be realized in enhancement package 2 or 3.
    Thanks and best regards.
    Oliver Vöpel.

  • Meta data Overview for Idoc Adapter

    Hi All,
       When i am trying to create meta data overivew for Idoc adpater of my source port, i am gettign this error "<b>Error: I::000</b>" and surprising abt this error.Any clues on this.........:) what should i do to do this??
    Thanks in Advance
    Cheers
    Veera

    Hi All,
       Once i have cross check RFC destination & Port and tried to load the meta data it was succesfully loded with out ant errors.The same port i have mention in Receivr Idoc adapter and tested the sceanrio File2Idoc.It is working fine.
    I have solved the problem my own ( And the tricky thing is i have deleted and recreated RFC dest,Port from XI to R3).However what is the cause of this error??
    Cheers
    Veera

Maybe you are looking for

  • Can I edit FCE projects when the files are on a External HD?

    Hello, I've recently reinstalled Snow Leopard. Since I have a clean start, I'm thinking about new ways to manage my video files for FCE editing. Video projects take up most of the space on my HD, so I'd like to keep them on an external drive this tim

  • Not able to pick PO text via READ_TEXT when PO is created by copy.

    Hi, I am not able to pick PO texts from READ_TEXT function module for PO's which are created via Copy of another PO as entries for that PO texts are not found in STXH table.However after creating PO if I do some modification in any text and save PO a

  • Log in error problem

    Greetings: I hope that you can point me in the right direction to correct thes log in malfunction. 1. I have a preset page in my Bookmarks that takes me to "MacOS X v 10.3 Panther & earlier. 2. I then Log In 3. I get new page with the message "Error

  • The FOD schema error our while creating the database. Please help.

    I couldn't run the schema for the FOD demo application. when I follow the steps, I get some exception during the database create part. From the File menu, choose Open. Open the workspace c:\temp\Infrastructure\infrastructure.jws. ( I edited the build

  • A Simple Java Editor

    Hello, I am looking for a very simple(barebone)Java editor which can provide syntax highlighting facility. I need to plug it into my application. Can anybody suggest me something? Looking forward 2 ur replies.