Sender & Receiver concept in controlling
Respected sir,
Should any body tell me the concept of sender & receiver rule in controlling? how we define it?pls give an example that who is the sender & for that sender who is the receiver?
Than'x
Dhananjay
Hi,
Sender and receiver objects are defined in CO with respect to cost transfer. As you may be aware, many of the cost objects such as production order, network order, IO, WBS elements etc. are temperory cost gathering objects. This is based on SAP's basic premise that cost should be booked where it is incurred.Once cost is fully gathered, cost is settled to more permanent entities such as PA, cost centre etc. This process of transferring actual cost from one object to another is called settlement. The cost objects which gather and send costs are called sender objects, and cost objects receiveing the cost are called receiver objects.
Also there are other types of transfer of cost between cost centres and WBS elements etc.
The concept of sender /receiver objects make the flow of cost in the enterprise transparent.
Hope this explanation meets your requirement.
If so, pl close the posting.
Muraleedharan.R
Similar Messages
-
As of 2014-March, the same thing happening on my system. This seems to have occurred, after the latest batch of 28 patches (including SP2 - KB2687455) from Microsoft Updates applied on 13-Mar-2014 and 19-Mar-2014. I have been running Outlook 2010
since it was first available.
An unhelpful error is thrown, after trying to manually perform a Send/Receive:
Not Implemented
While in Outlook 2010, clicking FILE > INFO reveals the following warnings in red:
"Upgrade in Progress. Your mailbox is currently being optimized as part of upgrade to Outlook 2010. This one time process may take over 15 minutes and performance may be affected while the optimization is in progress."
There's an "Upgrade Now" button but it fails to produce any visible result. Next to the button, another warning in red:
"You must upgrade to the latest version of Outlook Hotmail Connector to continue using this e-mail account."
Again, I do not have the Outlook Hotmail Connector installed. Nor have I recently upgraded to Outlook 2010.
I am unable to access ANY account settings, as well as poll my various mailboxes.
While reviewing the list of installed updates (Control Panel > Programs and Features > View Installed Updates), there are 28 approximate patches -
specifically, Service Pack 2 (KB2687455) - that were recently applied to Microsoft Office Professional Plus 2010.
Microsoft, what the #$%# is going on?
I've read some related posts that suggest the core issue is other than what Outlook is reporting. The posts recommend the following. However, in my case, the below steps did not correct the
issue. In fact, the new profile would not allow me to view/manage the associated accounts or data files.
(1) Remove your current Outlook Profile. No worries - this doesn't affect your mail data (.PST files):
http://office.microsoft.com/en-au/outlook-help/remove-a-profile-HP010356455.aspx
(2) Create a new Outlook Profile:
http://office.microsoft.com/en-au/outlook-help/introduction-to-profiles-HA010355553.aspx
Note: Outlook complained "An unknown error occurred, error code: 0x80040154." However, exiting the Mail config window and relaunching shows that the new profile is intact.
(3) If you previously had the Outlook Hotmail Connector installed, reinstall it. If not, then just ignore and the warning should go away after creating a new Profile.
32-bit connector: http://www.microsoft.com/download/en/details.aspx?id=24677I was able to resolve this issue as follows. However, why it occurred is unknown at this time and
unrelated to a corrupted Outlook Profile, as mentioned on my prior post. It seems highly probable that it was caused by the recent batch of Microsoft Updates for this product which included Service Pack (SP) 2.
1) Performed a "repair" of Outlook 2010, via the Control Panel > Programs and Features.
2) Rebooted.
3) Prior to launching Outlook, returned to Control Panel > Mail and configured the location of my PST file (not in default directory).
4) Had to reestablish as off my mail accounts, settings/preferences/etc. This step was the most tedious and frustrating. -
I need to find out how much wifi data my apps are using. I am on a very limited amount of WiFi data each month, which I am regularly exceeding. I have been told to work out which of my apps is using the data. Also, I think I have closed an app by double clicking the home button, then swiping the app up - is this the way to close it, or will it still be sending/receiving data?
Go into your Settings : General : and turn off background refresh for your apps. In Settings : Mail turn Fetch new data to OFF and Load Remote Images to OFF. This will mean that Mail will only check for messages when you actually use it, and all your advertising junk mail won't have all the images in it.
Turn off push notifications every chance you get.
Make sure you are actually quitting apps: to quit apps press the Home button twice and you should see a bunch of smaller screen images for every open app. To quit the app swipe from the screen image (not the icon) upward off the top of the iPad. You can swipe left and right to see more open apps, but there must be no left-right movement on the screen when you swipe upward to close the app.
Turn off your internet connection when you do not need it. The easiest way to do this is to swipe up from the bottom of you screen to get the control centre, and then touch the airplane to turn on airplane mode. You can repeat this sequence to turn it back on again when you need it. Most especially turn airplane mode on whenever you are sleeping your iPad for long periods. This will save battery life too. OR actually turn your iPad off - which means holding the power key down for several seconds until the red swipe bar appears, and then swipe to turn it off. If you go this route, note that it will take longer to turn on then it takes to wake from sleep. -
Outlook 2010 Crashes After Opening During Send/Receive with a c0000005 Exception Code
Ok, I'm stumped! As soon as the user opens and loads Outlook, when it starts to do the send/receive, Outlook crashes. Here's a list of what I have tried along with the details that Windows
provided:
Problem signature:
Problem Event Name: APPCRASH
Application Name: OUTLOOK.EXE
Application Version: 14.0.6117.5001
Application Timestamp: 4f3e2d20
Fault Module Name: mso.dll
Fault Module Version: 14.0.6112.5000
Fault Module Timestamp: 4e9b27af
Exception Code:
c0000005
Exception Offset:
0063a12a
OS Version:
6.1.7601.2.1.0.256.48
Locale ID:
1033
Exception Code:
0xc0000005
Fault offset:
0x0063a12a
Fault process id:
0x15a8
Faulting module path: C:\\Program Files (x86)\Common Files\Microsoft Shared\office 14\mso.dll
Additional information about the problem:
LCID:
1033
skulcid:
1033
I have:
Disabled add-ons
Tried Outlook in safe mode but still crashes
Uninstalled and reinstalled Outlook
Ran scanpst.exe
I have even installed this mailbox profile on a different computer that had a functioning Outlook profile on it, and it now causes the same issue after syncing from the Microsoft
Exchange server.
So, I logged into the Microsoft Portal online and checked for any emails that did not download from the webmail app to the Outlook box in case there was a corrupted email.
Any help or suggestions would be greatly appreciated.
Many Thanks!Hi,
Since the Faulting module is mso.dll, please browse to:
C:\\Program Files (x86)\Common Files\Microsoft Shared\office 14.
Find mso.dll and rename it to mso.old. Then go to Control Panel -> Programs and Features to repair Office, a new mso.dll should be generated, open Outlook to check if the issue is fixed.
As you mentioned the issue persists on another machine with the same mailbox, I suggest you use the tool MFCMAPI to see if there's any items stuck in the mailbox.
To download the tool:
http://mfcmapi.codeplex.com/releases/view/127629
Open the mailbox with the tool, then go to QuickStart -> Open Folder -> Inbox, check if there's anything stuck there which doesn't sync to Outlook. I suggest you order the items by size, since large items are more likely to be stuck.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Sync/Async Bridge without Asynchronous Send / Receive Steps
Hello together,
we have a synchronous HTTP <--> RFC Scenario using a sync/async Bridge in BPM with the following characteristics:
1. HTTP Payload is received (opens Sync/Async bridge)
2. lookup is done in an LDAP System (we use an UDF here)
3. Customzied JCo is called which takes the XML String as input parameter (done by Java Mapping)
4. Return Value of JCo then is delivered back to HTTP Client (closes Sync/Async Bridge)
--> No RFC Adapter is used here as the provided JCo does all the parsing
When testing the sync/async bridge is started but we receive an timeout after 30 sec.
Could it be that the sync/async required exactly a pair of async send and receive steps (which we do not have in our scenario and which we do not need)?
This would be a problem, as we have to use BPM in this synchronous scenario. Do you have any idea?
Thank you very much for your help.Thank you for your reply, but I think you misunderstood me. Please let me try to clarify once more:
1. Synchronous HTTP Sender Interface (Request/Response) opens Sync/Async Bridge
2. LDAP Lookup is done by UDF using the Request Message in Transformation Step
3. Switch is done based on result of Lookup
4. Branch 1 in switch calls customized JCo with Java Mapping in Transformation Step (Request Message as input, Response message as output)
5. Response message (delivered from JCo Call) should close the Async/Sync Bridge and be send back to HTTP Sender
--> We have no async send / receive steps in this scenario.
The customized Jco has been provided by an external partner as there is lots of parsing logic implemented. So we want to connect to the backend SAP system using this JCo and not via a send step.
My key qestion is therefore: Is it absolutely necessary to use exactly a pair of async send / receive steps in a sync/async bridge?
In this case we have to look for another design concept without BPM which would make the solution very difficult I think.... -
Hi all,
We are on PI 7.4 AEX SP 7. We are trying to get the following scenario working: Inhouse warehouse management system (JMS) --> PI --> ECC (IDoc)
Sender is configured as 3rd party technical system system with business system maintained in SLD
business system has logical system assigned in SLD
adapter specific identifiers show logical system in ID / NWDS
logical system is defined in receiver (ECC system)
partner profile is created in ecc for this very logical system (inbound parameters)
No mapping of EDI_DC40 node in ESB (complete node disabled)
no header mapping in ID / NWDS
receiver IDoc AEE adapter is configured to not enforce control record (Control Record in IDoc XML = Not Mandatory)
no Identifiers specified in receiver IDoc AEE adapter
My guts feeling is that this should work, however, it doesnt't. Failing with "The Configuration for Sender/Receiver Partner Number/Port is incorrect. Enter proper values in Sender/Receiver Component"
Any thoughts are highly welcome.
Cheers
JensHi,
The error mentioned by you is not related to the port..but its related to the Application ...
IDoc 51 means idoc has been received in R/3 client and when it tries to process it ended in error..
Check with the functional consultant for the error you have received..
HTH
Rajesh -
Dynadock U3 - Ethernet not working - Send/Receive lights flash every 3 secs
My wife uses a Dynadock with a Spectre XP.
The Ethernet worked fine when I first set it up, but I've just noticed the wired connection is not operating (is operating on wireless only).
The Send & receive lights on the Dynadock n/w port flash every ~3seconds, & the status of the port in Windows alternates between Enabled & cable unplugged.
Not sure how long the wired connection hasn't been working, but my wide did upgrade to Win 8.1 a couple of months ago. At the time I had to upgrade drivers to get the video via the Dynabook working. I've checked & the Win network drivers were also upgraded as part of this.
Have seen a couple of other posts about uninstalling/reinstalling drivers (done) & cases where the network icon in device driver has a warning '?' (says "device is working properly" in my case).
Any recommendations, or suggestions for additional diagnostics?Hi
I think the issue appears due to the upgrade to Win 8.1 system.
You will need to configure the network properties of the LAN adaptor:
For connection to the Ethernet network via a network cable connect one end of a network
cable to the Ethernet port (RJ-45) on the dynadock and the other end to your network for high
performance network access.
To configure the network properties of the Ethernet adaptor:
In Windows 8.1, move the mouse pointer and click icon in the lower-left of the screen to get to the
Apps view, and then click Control Panel -> Network and Internet -> View network status and tasks -> Change adapter settings.
In the Network Connections folder, double-click the connection icon for the dynadocks Ethernet adaptor,
which is indicated by dynadock Ethernet. This will open the Local Area Connection Properties window for you to
configure the network settings as required according to your network environment.
Note: The Local Area Connection icon in the System Tray/Notification Area will not show a connection. Open Network Connections to view the Ethernet Connection.
I found also another thread about the similar theme:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=70771 -
Hi,
I am new to the servers and domains stuff. Therefore i have setup succesfully a Server 2008 R2 server with AD, DHCP, DNS roles installed. I configured the roles as i wanted and then i installed Exchange Server 2010 so the clients can use Outlook to send
receive mails in and out of the domain.
I can send/receive mails inside the domain (disalfa.com) but i cannot send/receive mails outside the domain. I configured the Exchange properly, i am sure of that. I am 99,9% i did something wrong with the DNS (A records, MX records, etc.).
Also is there something i must do from the control panel of the site i purchased the domain name and the mails?
Can someone guide me so i can manage to work this out?
Server 2008 - 192.168.1.250
Registered Domain - disalfa.com
Thank you in advanceHi ,
I recommend you refer to the following article to configure your external mail flow:
Configure Internet Mail Flow Directly Through a Hub Transport Server
Prerequisites
Register MX resource records for all accepted domains in a public domain name system (DNS) server. Consult the documentation of your DNS provider for information about how to register MX records for your domain. Detailed procedures about how to complete
this step are outside the scope of this topic.
Configure network gateways to allow SMTP traffic to and from the Hub Transport server. Consult the documentation for your network routers and firewalls for information about how to route SMTP traffic to and from the Hub Transport server. Detailed procedures
about how to complete this step are outside the scope of this topic.
Best regards,
Niko Cheng
TechNet Community Support -
Hi Guru:
I have a question about the send/receive when upload the data.
Technically, what should happen when click the send button? We plan to use a 3rd party service for DSE purpose, is the send button supposed to send the file to the 3rd party? How to configure it to make it could send the file correctly? How about the receive?
Thanks.
EricHi Eric,
The 'Send' functionality is to send specific data and fields for classification which is done outside of SPM application. For this the generates the data in a flat file format and places the file in the 'Export folder' specified under 'Global settings'. The system does not send it directly to the external vendor. You will have to pass these files over using an FTP program if necessary. Also please refer to OSS note 1357322 - Performance/completion issues with inbound/export transfer which allows you to control what files are generated.
The receive functionality works similarly. Once the DSE (Data Standardization and Enrichment) vendor sends you the 'cleansed' files you should place them in the import directory provided under 'Global settings'. Using the data management functionality you can then upload them into the SPM application.
Hope this explains the process.
Regards,
Rohit -
Our application needs to send/receive mails from a mail server in NT
environment. Does forte provide SMTP and POP3 protocol support(libraries)
so that we can use external connection class to connect to the server and send/
receive mails or do we have to use third party controls. Any help would be
appreciated.I think with the .mac account that is a known bug, and just click ok, at least that is what I do. I would assume the same with your cable ISP. Let's hope that is solved with 10.5.2
As for your accounts being offline I also get the same behavior, either when I reboot my internet connection but Mail is still opened or randomly for certain accounts. I have only found that either waiting for a while or quitting Mail and opening again will work. Again, let's hope whatever strange behavior here is fixed with 10.5.2
I know I am not offering any solution here, just confirming that others are experiencing the same behavior.
hope this helps -
The setting Leave mail on the server and Delete after n days and Pressing Send/Receive all folders causes outlook 2010 to duplicate all mails of the last n days over and over again.
If I leave outlook 2010 open this problem does not occur, mail will be retreived without a problem. If I leave Outlook 2010 open for a long time and then press Send/Receive all folders it does work ok. If I restart Outlook 2010 and then press Send/Receive
all folders the problem occurs.
The pst file is a new one. OTher mail accounts that do have Leave mail on the server but not Remove after n days do not have the duplicating behaviour.
I have manually removed 6400 duplicate mails, if Microsoft does not solve this urgent problem soon I need to remove Office 2010 from my computer and go back to Office 2007, Office 2007 worked fine for me.
Is there a solution fir this problem, or a free tool to remove all duplicates?Dear Pieter,
I suggest creating a new Outlook profile, and create the problematic account in the new profile, to see if the problem occurs.
Here are the detailed steps on how to create a new profile to test this issue
==============
1. Exit
Outlook.
2. Go to
Start > Control Panel, click or double-click
Mail.
Mail appears in different Control Panel locations depending upon the version of the Microsoft Windows operating system, Control Panel view selected,
and whether a 32- or 64-bit operating system or version of Outlook is installed.
The easiest way to locate
Mail is to open Control Panel in Windows, and then in the
Search box at the top of window, type Mail. In
Control Panel for Windows XP, type Mail in the
Address box.
Note The Mail icon appears after Outlook starts for the first time.
The title bar of the Mail Setup dialog box contains the name of the current profile. To select a different existing profile, click Show Profiles, select
the profile name, and then click Properties.
3. Click
Show Profiles. Choose Prompt for a profile to be used.
4. Click
Add.
5. Type a name for the profile, and then click
OK. Please also follow the onscreen instructions to create the email account in this profile.
6. Start
Outlook, and choose this new profile.
If this problem does not occur in the new Outlook profile, the old Outlook is corrupted. We can delete that and use a new Outlook profile.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Best Regards,
Sally Tang -
Send receive error Outlook behind GFI Webmonitor
I have new server and install GFI Webmonitor 2012 standalone after setup i can't send / receive email via outlook
Before these i have isa server and send/receive work , and gfi webmoitor not include any option add port or open port
for smtp , pop , imap ports
Note : I don't have exchange server , but i have domain email our company from gmailHi,
First, we need to determine if this issue is caused by corrupt Outlook settings or the GFI Webmonitor settings.
Before checking the Outlook side, please first login to your webmail and check if you can send/receive emails. If it works properly in Webmail, you can try to create a new mail profile in Control Panel and reconfigure your email account in the new profile
to check the result.
To check the GFI Webmonitor side, you'll need to contact the GFI Webmonitor support to get further assistance.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Hello all.
Last weekend we patched Beehive from 2.0.1.0 to 2.0.1.2. An unexpected consequence arose - every end user using Outlook is getting a pop-up fro OBEO at the bottom of their screen - "Send/Receive errors." It looks like the upgrade has either uncovered some unresolved errors, or is re-hashing errors that we took care of. Some of the updates are a couple months old.
My questions are -- Has anyone else seen this? Is there something I can do to make this go away? I've got a high-powered user with a folder-create error that cannot be resolved.
Thanks
ssbssb,
we had similar observations when moving from the 1.5.1.5.0 client to 2.0.1.2.0.
In former versions of OBEO, pending changes that could not successfully be uploaded to the server inconspicuously were displayed in the status bar.
Also look at [this thread|http://forums.oracle.com/forums/thread.jspa?messageID=4080889] .
Dev stated it enhanced the processes of reconciling these changes in the new version. In the same run, they obviouly increased the intrusiveness of notifying the user about such issues (in my eyes 5 minutes to 1 hour of notification delay to be chosen by the user is a little bit too intrusive, compared to the unimpressive status notification displayed earlier).
You have the option to retry the pending operation, open the troublesome item (which is a nice new option) and abandon the operation. We saw, that not all operations always offer all of these operations.
To have a clean slate, you might consider resetting the pending changes in the control panel mail profile administration dialogue.
Regards, Thomas
Edited by: snmdla on Jun 23, 2010 8:10 AM -
RE: (forte-users) send/receive mail
Hi Nat,
you have three possibilities to integrate MAPI to a Forte program:
1. using mapi32.dll (simple MAPI) or mapix32.dll (MAPI). You must integrate
this libraries using a C wrapper class (as described in "Integrating with
External Systems").
2. using OLE Active messaging library ( as described in 'Integrating with
Windows and Macintosh")
3. or implement POP3 using an ExternalConnection class.
Regards,
Zenon Adamek
Forte Developer
Purolator Courier Ltd.
ZAdamekpurolator.com
-----Original Message-----
From: Nat Balasubramaniam [SMTP:NBalasubdcjs.state.ny.us]
Sent: Wednesday, January 26, 2000 2:18 PM
To: Forte-userssagesoln.com
Subject: (forte-users) send/receive mail
Our application needs to send/receive mails from a mail server in NT
environment. Does forte provide SMTP and POP3 protocol support(libraries)
so that we can use external connection class to connect to the server and
send/
receive mails or do we have to use third party controls. Any help would be
appreciated.
For the archives, go to: <a href="http://lists.xpedior.com/forte-users">http://lists.xpedior.com/forte-users</a> and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.comHi,
Unfortunatly, Forte does not provide SMTP and POP3 protocoles.
But, you can use External connections to do it if you need.
You can find a simple SMTP send mail sample code on
http://perso.club-internet.fr/dnguyen/ . The receive should be as easy as the send.
For MIME base 64 encoding and decoding, it should last one or two weeks of coding
(if you need optimization).
One advantage of coding this in Tool directly is the portability.
In your case, on NT, you could also interface with MAPI using for instance the
ActiveX interface.
By that way, you will already have SMTP, POP3 and MIME.
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
edwardsmjwillis.com a écrit:
Hi,
Our Forte development team are currently investigating how we can add internet
mail capabilities to a Forte application. Our application needs to send/receive
mails from a mail server in an NT environment. Does forte provide SMTP and POP3
protocol support (libraries) so that we can use external connection class to
connect to the server and send/ receive mails or do we have to use third party
controls ?.
Any help regarding code examples or third party solutions would be appreciated.
Thanks in advance
Mark J Edwards
Senior Technical Specialist
Willis
Email: edwardsmjwillis.com
The information in this email and in any attachments is confidential and may be
privileged. If you are not the intended recipient, please destroy this message,
delete any copies held on your systems and notify the sender immediately. You
should not retain, copy or use this email for any purpose, nor disclose all or
any part of its content to any other person.
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
I have spent hours on the phone with Apple and AT&T. I went thought reset, on/off, etc, etc with both companies to no avail. Each company pointed fingers at the other....as being the source of the problem.
Problems: Suddenly ALL incoming calls were going directly to VM with no signal I missed calls and/or had VM. I was also unable to receive all Text Messages...Oddly, I could send text messages to anyone (even non-apple users but I could not receive their responses)........then I when I got home I started receiving text messages from other apples users ONLY. I assume now - iMessage kicked in and I could text (send/receive) other iPhone/iPad/iTouch users ONLY. ....yes, I could still (send) text messages to my husband's blackberry (he received my messages fine) but my phone would NOT receive his text respones.
Finally, I googled the problem and found this community where other people have had the exact same problems! One person said he "turned off 3 G" which was the solution for him....so I did the same and VIOLA! My problem solved! Nevermind the fact that I pay for 3G and cannot use it....so here's my question, if 3G is the problem on my phone is this an APPLE issue or a NETWORK problem? Do I purchase a new phone and slip in my same SIM card and hope the same does not occur or do I get a whole new SIM card and phone? What is the long term resolution to this problem?
I am happy however to find that my problem is NOT an isolated incident and wish Apple or AT&T had told me this is not so uncommon because I thought (based on the baffled response from Apple) that this has never occurred before. Where is Steve Jobs when we need him?jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
One Apple ID for many phones. How to stop all phones downloading the same app?
Hi everyone, In advance, I'd like to thank you for taking your time to read my question and helping me. Currently, many members of my family have iPhones, ranging from 4 to 5, and for the sake of convenience, I set them all up using my Apple ID. Rece
-
Just tried to open Disk Utility and after appearing in the Dock, bringing up the window and saying "Gathering Disk Information..." it crashes. Tried to open it several times, and the same thing happened each time. The crash report is below: (Possib
-
I have an iCal settings problem. I simply cannot change the format to 12 hours. I have repeatedly set the system to 12 hours and that works fine. I have re launched iCal several times to no avail. Running system 10.6.7 and iCal is 4.0.4. Any ideas? T
-
Adobe Air Application Descriptor
Installer file damaged. I have installed and re-installed Adobe Air at least 10 times. How do I correct the error?
-
Hi, I suggest adding a wizard to migrate from XE 10.2 to XE 11.2 Roberto Edited by: rober584812 on Apr 2, 2011 9:38 PM Edited by: rober584812 on Apr 2, 2011 9:39 PM