Sender Rewriting Scheme?

Are there any plans for IronPort to implement Sender Rewriting Scheme in AsyncOS? I'm personally not a big fan of SPF and SRS, but like it or not they're being deployed. We use a C300 to operate a mail forwarding service for our alumni (we get the forwarding data via LDAP), and I just finished working a problem that turned out to be caused by the fact that this forwarding service doesn't do SRS.
If SRS is in the works, then please for the love of all that's good and right in the world, include some option to check the original sender domain for an SPF record before performing any SRS mangling on it.
Thanks,

I do not know if Email Security Appliance(ESA) Product Management team is scoping this out and planning to implement it in a future release of the AsyncOS, but here is more information on Sender Rewriting Scheme(SRS) for those that are curious.
I would recommend that if you are proponent of SRS, that you send an email or communicate to your IronPort sales representative or system engineer that benefits of having SRS. This is the most effective way to get ESA product management to pay attention and to become aware of your wants.
SRS references:
1. http://en.wikipedia.org/wiki/Sender_Rewriting_Scheme
2. http://www.openspf.org/SRS
3. http://www.libsrs2.org/

Similar Messages

Sender rewriting rule not working

Hi,
I am unable to make may sender rewriting rules working. The recipient rewriting rules works ok.
I want to change the reply address that shows up in the destination email. For example, if i am sending from [email protected] (via Oracle webmail)i want to make the destination see [email protected] as a reply address.
i ve tried everything, but without success.
An example of sender rewriting rule:
$*@cm-lisboa.net, $[email protected]
Regards,
Luis Neves

Hi,
Could you give us more details about : your coding, input sample when error is raised ?
That'd help a lot
Chris

Sender rewriting rules

hi !
Is sender rewriting rules working ?
my email domain is something like ocs.domain.com
I would like to rewrite the sender address to domain.com
( return-path=domain.com in the email header )
So the person who get the email would reply to [email protected], and not [email protected]
I used this rule in the "sender rules" :
$*@ocs.domain.com,$[email protected]
but it doesn't work.
when i send an e-mail, here is the header :
Return-Path: <[email protected]>
Delivered-To: online.fr
Received: (qmail 13510 invoked from network);
I'm using OCS R2 on linux.
thanks in advance
Majd

If the case is that sender rewriting rules don't function like this, what is the workaround? We have a case where we are trying to accomodate old mail aliases and addresses but we want to update the headers to force the new return address even if one of the users is still using their old address in their client. Is there no way of doing this?

Best way to send a schema

Hello:
I am new to Oracle and so bear with my ignorance.
I have an instance running that has several schemas. Luckily, I have each schema on a different tablespace and different database files.
I want to put this on a CD and send it to somebody else who can just incorporate it into his environment.
Can somebody guide me?
In SQL server, I have to just detach the database, zip it up, put it on a CD. The recipient would have to unzip it, and attach it to his SQL server and voila, everything will be fine.
What would I have to do in case of Oracle?
Thanks.
Venki

To import a schema in Oracle you can apply this command at the command line:
exp <schema_name>/<password>@service_name file=<file_name>.dmp log=<file_name>.log buffer=50000000
Joel PÃ©rez
http://www.oracle.com/technology/experts

File Sender Filename scheme problem

Hello,
we need to pick two types of files from the same folder on FTP server:
Examples of filenames are:
FILEINVRPT12_28102010.xml and FILESLSRPT12_28102010.xml
We tried to use Advanced selection of files for these two file types and the filename scheme used was
FILEINVRPT.xml in filename and FILESLSRPT.xml in Filename mask for Advanced selection
All files of type FILEINVRPT.xml have been picked up but FILESLSRPT.xml were not.
We tried to remove advanced selection and even used *.xml and . as filename scheme ,still these files aren't picked up.
Then we tried giving exact filename (hardcoded) for some of these files and they were picked up ,so there should be no problem with these files.
Can anyone please suggest what could be the reason for this strange behaviour?
Thanks a lot.
Best Regards,
Shweta

Hi Shwetha,
As per my understanding, you need to pick two different files(not having same naming convension) from the same folder. I see that you are using Advanced selection for Source files.
This can be easily achieved, I have done it and providing you the steps to configure the adapter.
1. In the File Access parameters, provide the source directory and filename as FILE*.xml.
2. Now, check the option, advanced selection for source files.
provide the directory = 10.20.30.40
and the File Name Mask FILEINVRPT.xml, FILESLSRPT.xml
Ensure that the file placed in the FTP should have the same naming convension of the filename.
Thanks,

Changing sender email address via rewriting rules

My objective is to change my sender email address. For example, suppose my OCS email address is [email protected] and I would to send an email to [email protected]
John logs into yahoo mail and would see my mail. Upon opening my email, I would like John to see that the sender email address to be [email protected] so that whenever John replies my mail, the replied mail would go to [email protected] and not to [email protected]
I read the email admin guide and I configure the Sender rewriting rules within SMTP_OUT. I have key in the following within the Sender rewriting rules: $*@test.abc.com.my,$[email protected]
I restart the SMTP_OUT services and I check the log files in MIDTIER_HOME/oes/log/um_system/SMTP_OUT/12345
I found out that the rewriting rules have take effect on one of the lines.
Then I log into OCS as user Andrew with test.abc.com.my domain and send an email to yahoo.
I open my yahoo mail, which I receive the email.
However the sender email address remains unchanged which is [email protected]
How can I change the sender email domain?
thanks;
andrew

Your observation is very correct in terms of symptoms, not of behaviour. We have numerous ER's there enabling header rewriting, too. Obviously for you, envelope rewriting works well, without to achieve the target you want to address. Please forward your request to Support Services with an Enhancement Request for native header rewriting.
Otherwise 3 ways:
1 Milter C-SDK
2 Milter general
3 relay accomplishing this task.
On 2,3 we have samples ready, for 3 in particular for postfix.

Regarding sending response at a time to a WSDL in BPEL

Hi All,
I have a requirement that is explained below:
Note: Below paragraph is somewhat long but I am doing it for making u to understand my requirement
I have two applications A and B. I am recieving the request schema from A and I am invoking
response WSDL of B application to update the details of the recieved schema(from A) in the B
application.I am using BPEL application for that.I am reieving that for every half an hour and
updating the same in B in order to achieve interval reading of a device for every half an hour.
As of now for every request SOA creates one BPEL instance.
My present requirement is :
Rather than updating the B application for every half an hour,I want to update the B application
for 24 hrs(every day at once) at the end of the day(midnight 12'o clock).
But A application sends data(schema) for every half an hour that I can't change.I have to reieve
that for every half an hour and update all the interval readings at the end of the day in the B
application.
How can I do that?
Thanks in advance

Hi,
Create two BPEL processess, the first to receive from application A and save the data into a table and the second, activated by schedule, to retrieve data from the table and send it to application B.
Cheers,
Vlad

Unable to convert sender XI party ... to an IDoc party

Hi folks,
I'm trying to implement the following scenario: Supplier (http) -> XI -> R/3 (IDoc).
In order to realise this, we are using a scenario with a party. Sender party, scheme and Agency are identified correctly and i can even send the data to my mailadress by changing the routing to a mail adapter.
But as soon as i try to send the received IDoc to the R/3 via an IDoc adapter i get the above error message.
I also searched the SDN for corresponding entries but unfortunately most solutions will only work with a scenario without a party.
I'd be glad if anyone could help me out.
Regards,
Stefan

Thanks a lot for your answers. I tried different settings within the we20, but i always receive the same error.
I've got the following information at hand:
The supplier sends via an URL that specifies supplier name and service. In additon the suppliers backend and sending system are named inside the IDoc. In the end, i got the following information:
URL-Sender:             ABC
URL-Service:             http_integration
Sender-Scheme:        XIParty
IDoc-Sender:              XYZ
IDoc-Receiver:            123
Sender namespace:   urn:sap-com:document:sap:idoc:messages
Any suggestion how to configure the we20 inside the backend system?
Regards,
Stefan

AIR iOS URL Scheme

I'm developing an AIR for iOS app for my client to run on an iPad, and my app needs to be able to launch other apps using a URL scheme, and also to be launched by another app, by receiving a URL scheme from it. From what I have read, it would appear that AIR for iOS apps can receive and respond to URL schemes, but they cannot send URL schemes to launch other apps, due to security restrictions.
Does anyone know if it is possible to both send and receive URL schemes?

Yes, you can.
Open installed "Wikitude" app can be done via this script
import flash.events.MouseEvent;
btn.addEventListener(MouseEvent.CLICK, callURL);
function callURL(e:MouseEvent):void{
    navigateToURL(new URLRequest("wikitude://"));
Same way you can open your app from any other. In example above Wikitude app it's URI id. The same as below iPadARIconAppB
Here is part of Application-xml.xml descriptor from my old project:
<iPhone>
    <InfoAdditions><![CDATA[
<key>UIDeviceFamily</key>
<array>
    <string>1</string>
    <string>2</string>
</array>
<key>CFBundleURLTypes</key>
<array>
    <dict>
      <key>CFBundleURLName</key>
      <string>com.camel.geo.iPadARIconAppB.iPadARIconAppB-scheme</string>
      <key>CFBundleURLSchemes</key>
      <array>
        <string>iPadARIconAppB</string>
      </array>
    </dict>
</array>
<key>UIApplicationExitsOnSuspend</key>
<true/>
]]></InfoAdditions>
    <requestedDisplayResolution>standard</requestedDisplayResolution>
</iPhone>
You need to change CFBundleURLName to your app ID by my sample and CFBundleURLSchemes put there your own app name.
If you want open your app from any other - you must open "iPadARIconAppB://" and if you need pass params - just make "iPadARIconAppB://myparams" and read it via Invoke from Adobe Air.
Air is great and allow many things

Change Sender

Hello guys,
Is it possible change de sender (rewriter the email address) ?
Thanks

Yes there are a couple of ways to do this, you can use LDAP for aliasing and masquerading. Basically Aliasing is a way of rewriting the recipient address to a different value by using LDAP Attributes, and masquerading is the form of rewriting the sender address mainly used for outbound connections.
These are documented in the Userguides and also extra pointers on the support portal.
If however you don't have LDAP you can use the command aliasconfig which holds a static table of addresses to change from.
Hope this helps

XMP Schema problem Photoshop CS3 and Bridge

Hi All,
I am in the process of creating a XMP schema to contain custom metadata.
I have created a schema that works 80%. The problem I have is that although the schema shows up and displays all the fields, the data I input is not savced to the image file. This is the same in both Photoshop CS3 and Bridge.
Has anyone come across this problem before?
I would be happy to send the schema to anyone who is happy to check it over for coding problems.
Many thanks
Andrew

Hi Thomas,
I am not sure how to do this. Do I do this through Console?
I tried and received a nul return.
Also is the file you are referring to the image file or the Schema text file?
Sorry, I am a beginner when it comes to XML....
Thanks
Andrew

Payroll Schemas

Hi,
I want to learn about payroll schemas of usa and uk.
Can somebody help me out for sending the schemas link.
from where I can download the material.
Also i want to know to write schema do we require programming language. I am sap CERTIFIED IN HR MODULE.
Please help me out
thanks in advance

hi
since u have done the certification ...would say it does help...but if u hav eprev programming bggrnd..it'll help u out writing n modifying the schemas and writing something on ur own by reading the payroll log...but not necessary u can learn by viewing the log, even if u dont possess any programming lang knowledge!!
documents on schemas can be found on help.sap.com...
reward points if it helps!!
Regards,
Gunjan

Oracle License schemes

We are using oracle software for development.is there any licensing scheme for oracle for development?.How many user can use the database?.
Please send license scheme details.
Thanks & Regards
Cyril J Britto

Hi,
Oracle Database or for that matter any Oracle technology products are licensed using 2 metrics
1) Named user plus
2) Processor(CPU)
Named user plus can be used when the number of users accesing the database can be easily identified or counted.
Processor based licensing is done when there are unlimited number of user accessing the database /application
eg: Internet based application where a count on the number of users is not possible.
If one has valid license's and is under proper support from Oracle one NEED NOT pay extra for the new versions that are released by Oracle.
Hence you should ensure that the licenses are renewed year on year so that you are eligilble for updates/ upgrade as an when released by Oracle.
Thanks,
BT.

Sending an XML that contains CDATA to a SOAP service using wcf-webhttp adapter

I've run into a rather unique problem when trying to send an xml that contains the <![cdata[]]> tag to a soap service. Without the tag the xml sends through without issue. However, when I add the cdata tag within the xml, BizTalk immediately
fails without even attempting to send to the service. I receive the following error:
"The published message could not be routed because no subscribers were found. This error occurs if the subscribing orchestration or send port has not been enlisted, or if some of the message properties necessary for subscription evaluation have not
been promoted. Please use the Biztalk Administration console to troubleshoot this failure. "
I have ensured that the send adapter is enlisted and started.
This is on a BizTalk 2013 installation.
Any and all help is appreciated!
Thanks

as per my understanding, if you use the
<![cdata[]]> tag in sending message, BizTalk is not able to send the message as it is not matching with your send message schema that is why error 'The
published message could not be routed because no subscribers were found.....'
Please compare the message format or configured schema in send shape and message which suspended when
used <![cdata[]]> tag used.
Regards
Suman

Rewriting Senders Address

Our users that don't want their full names used when sending out from oracle web email. Is it possible to rewrite the addresses so that only the first name is used?
Is their another way to allow the web email user to specify how his sender address will appear to others?
Example:
User bob.smith, who uses an alias of bob, would like his email address ([email protected]) to appear as [email protected]
I have tried making changes in the Sender Rewrite Rules for SMTP_in and SMTP_out using this rewrite rule, then restarting the service.
$+.$[email protected],$[email protected],"Use First Name Only"
I have also tried this:
[email protected],[email protected],"Change for Bob Only"
When I test I receive Bobs email with the following sender address: [email protected]
Any ideas would be helpfull,
James

Currently, you can't rewrite the Sender's address. At the moment, the rewrite rules only rewrite the SMTP Envelope (not the message headers). You'll be able to do this in a future release.

Sender Rewriting Scheme?

Similar Messages

Maybe you are looking for