Sender RFC Message not seen in sxmb_moni

Hi,
Uptill now i must have created 9 RFC To file scenarios ..all of them are working perfectly.
But this tenth one is bugging me up:
Problem:
1. I created RFC destination which is working perfectly fine i.e connection test is successful.
2. When i run the program the function module gets executed successfully, but i dont see any messages in sxmb_moni .In RWB inside communication channel monitoring I can just see is processing started and nothing else for that communication channel.. Whereas for other 9 CCs i can see processing started
& Message processed successfully messages properly..
Any help will be appreciated & points will be rewarded.

Hello,
can you have a look at this weblog:
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
it's a how to turn on the traces - Logging on the XI
This will help you...
************Reward points,if found useful

Similar Messages

Message not seen in SXMB_MONI

Hello Experts,
We are sending MATMAS IDoc from ECC system through PI 7.1 to third party using HTTP.
When Material is sent using transaction BD10 an IDoc gets triggered and is visible in transaction WE02 in green status.The Port used to send the IDoc data is the same that is configured in the Partner Profile for the PI system.
But the corresponding message is not visible in SXMB_MONI of PI.
Please help!
Thanks in advance,
Suraj

Hello Prateek,
Yes it is showing stuck in SM58 with status '::000'
If we see the help of status it shows "Field contents that were used for the placeholders in the statement MESSAGE."
We cannot understand what this status means or how to resolve it.
Please help!
Regards,
Suraj

RFC to File scenario.. Messages not available in sxmb_moni

Hi Experts,
I have created simple RFC to File scenario in my sandbox system. First time I am doing this type of scenario.
When I execute the program which is created to call the RFC Function Module nothing is coming into sxmb_moni in sap system as well as in PI system. I don't know why messages is not coming to sxmb_moni.
Please suggest me how to resolve this issue.
Thanks & Regards,
Satish Kumar P.

Hi Satish,
first monitor Sender RFC channel in communciation channel monitroing ,after executing program in ECC if BAPI triggered then definely you will see log in RFC sender channel.
if nothing was found then prob in ECC side like Pogram triggered BAPI.
Regards,
Raj

Can't send RFC message to XI

Hi ,
my scenario is RFC->XI->JDBC. I made necessary settings(RFC destination,
sender RFC adapter,sender agreement and Integration design
objects).Then I wrote following code;
CALL FUNCTION 'BAPI_BUS2054_GETDATA'
IN BACKGROUND TASK
DESTINATION DEST
EXPORTING
 I_PROJECT_DEFINITION = P_POSID
I_LANGUAGE =
I_MAX_ROWS =
TABLES
IT_WBS_ELEMENT =
 ET_WBS_ELEMENT = IT_TAB1
 ET_RETURN = IT_TAB_R
EXTENSIONIN =
EXTENSIONOUT =
COMMIT WORK.
When I executed this program I got no errors and it was processed
successfully.However inbound message payroad(t-cd:SXI_MONITOR)in XI
was empty,like this;
<?xml version="1.0" encoding="UTF-8" ?>
<rfc:BAPI_BUS2054_GETDATA xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
<I_LANGUAGE />
<I_MAX_ROWS>0</I_MAX_ROWS>
<I_PROJECT_DEFINITION>210Z001000</I_PROJECT_DEFINITION>
<ET_RETURN />
<ET_WBS_ELEMENT />
<EXTENSIONIN />
<EXTENSIONOUT />
<IT_WBS_ELEMENT />
</rfc:BAPI_BUS2054_GETDATA>
So I executed program again in debugger mode, and there are no records
in ET_WBS_ELEMENT...
Then,for the verification I rewrote my code like this and executed again;
CALL FUNCTION 'BAPI_BUS2054_GETDATA'
EXPORTING
 I_PROJECT_DEFINITION = P_POSID
I_LANGUAGE =
I_MAX_ROWS =
TABLES
IT_WBS_ELEMENT =
 ET_WBS_ELEMENT = IT_TAB1
 ET_RETURN = IT_TAB_R
EXTENSIONIN =
EXTENSIONOUT =
It finished successfully and there are records in ET_WBS_ELEMENT...
How can I get return table record 'in background task'? Does anyone
have ideas?
Best Regards,
Yuk

Hi,
Thanks for your reply.However I got new error message...
I delete 'in background task' from the source code and retry execution. Then my
application system(ERP2005) returned following error message;
Runtime Errors CALL_FUNCTION_REMOTE_ERROR
Short text
 "call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException:
What happened?
 Error in the ABAP Application Program
 The current ABAP program "Z_BAPI_RFC_CONNECT" had to be terminated because it has
 come across a statement that unfortunately cannot be executed.
 The error occurred during an RFC call to another system.
 In the target system, a short dump has been written as well.
 More detailed information on the error cause can be found there.
Error analysis
 An error occurred when executing a REMOTE FUNCTION CALL.
 It was logged under the name "RFC_EXTERNAL_ABORT"
 on the called page.
Trigger Location of Runtime Error
 Program Z_BAPI_RFC_CONNECT
 Include Z_BAPI_RFC_CONNECT
 Row 21
 Module Name START-OF-SELECTION
Line SourceCde
 1 *&----
 20
>>>>> CALL FUNCTION 'BAPI_BUS2054_GETDATA'
 22 * IN BACKGROUND TASK
 23 DESTINATION DEST
 24 EXPORTING
 25 I_PROJECT_DEFINITION = P_POSID
 26 * I_LANGUAGE =
 27 * I_MAX_ROWS =
 28 TABLES
 29 E_WBS_ELEMENT = IT_TAB1
 30 ET_WBS_ELEMENT = IT_TAB1
 31 ET_RETURN = IT_TAB_R
 32 * EXTENSIONIN =
 33 * EXTENSIONOUT =
 34 .
 35
 36
 37 COMMIT WORK.
 38
 39
 40 IF WA_TAB1 <> ''.
This message is proccessed in XI but status is 'system error-Restart Not Possible'.
Does anyone have ideas?

I can't use iphone5 China Mobile Network in China, unable to register activation, could not send text messages, not GPRS

Dear Sir or Madam，
As I bought my iPhone 5 (16GB,White) in the USA from Sprint, full price with tax, unlocked ,it was excepted to be a global phone. But now I come across with some problems in China using local carrier, everything is working properly except sending text message, and iMessage and Facetime also seem not to work.This is very serious for Apple and me! Will I have the chance to fix this?
I tried all the possible solutions from the Internet, and the Official solution offered by Apple (http://support.apple.com/kb/TS4459), but it doesn't seem to work.
Will Apple help me with this issue? Please do.

The Sprint iPhone 5 is NOT unlocked. The SIM slot can only be unlocked by Sprint for Sprint customers in good standing.
How exactly, did you "unlock" the phone? There are known issues with SMS on foreign networks.
If the article you linked to did not fix it, you'll have to work with your carrier.
The bottom line is, you should not have purchased a Sprint phone with the intent of using it without Sprint service.

Email a link opens entire Outlook exe, not just send a message, how do i change this to only send a message, not open outlook.exe?

When i click on Send a Link from Mozilla, it opens up an entirely new Outlook windows, so if i send two links, i will have two Outlook's open. how do i just make it only open a new message, not the entire Outlook. We are running Windows 8.1 and the newest firefox build, thank you

I actually do not know for sure, but when opening : "3bar" > Preferences/Options > Applications > and search for mail to, if you set it to always ask it does it still open two Outlooks?

Sender RFC is not working

Hi
I am working on RFC to SOAP Scenorio
I configured Sender RFC Communication Channel.
Using the same program id, i created RFC destination.
The RFC Destination is working fine.
When i test it using program, i am getting the
error alternativeServiceIdentifier via CPA-cache
Can you pls help
Regards
Madhan D

hi,
did you configure as per my blog:
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
regards,
Michal Krawczyk

Sender RFC scenario not working

Hi All,
I'm trying to configure a scenario where the sender is an RFC. I have done the following configuration steps:
1. Created an RFC destination in the R/3 system.
 Program ID: SAPSLDAPI_X3A
 Gateway Host: hostname of the XI system
 Gateway Service: Gateway service of the XI system
2. In the RFC Sender channel
 App Server Gateway: R/3 system's hostname
 App Server Service: of the R/3 system
 Program ID: SAPSLDAPI_X3A
3. In the RFC Metadata Repository Parameter, the details of the R/3 system is provided.
4. The RFC is triggered by calling a report program specifying the RFC destination.
But no messages are coming to the message monitor. Is anything wrong here or is something missing? Is there any way to see what happened in the R/3 system?
Could you please help?
Thanks,
Priya

Hi,
1. Created an RFC destination in the R/3 system.
Program ID: SAPSLDAPI_X3A
Gateway Host: hostname of the XI system
Gateway Service: Gateway service of the XI system
This is fine.. I would recommend you to use different name coz SAPSLDAPI is a RFC destination name for SLD communication purpose. Its better to avoid using some system names. But this is not a problem.
2. In the RFC Sender channel
App Server Gateway: R/3 system's hostname
App Server Service: of the R/3 system
Program ID: SAPSLDAPI_X3A
The App Server Gateway, App Server Service & Program ID should match with what you have given in the RFC destination of R/3 system.
After this try doing a test connection from the RFC destination sm59. Your test should be succesful.
3. In the RFC Metadata Repository Parameter, the details of the R/3 system is provided.
This is fine
4. The RFC is triggered by calling a report program specifying the RFC destination.
This is also fine.
Also in order to see any messages in SXMB_MONI you need to enable Logging. Trace level = 3 will not capture the Sync message. RFC is by default Sync. If your sender is not expecting any response then you will get an error in the response message, in this case you need Async.
For Async you need to add this addition while doing the call function "IN BACKGROUND TASK". Also make sure you re mentioning the destination while doing the call function.
Check you have mentioned
DESTINATION <rfc destname>.
Thanks,
Prakash

Messages not appearing in SXMB_MONI

Hi All
I am working on SOAP Sender and RFC Receiver scenorio.
I did all the configurations in the XI and tested the same using Altova XML Spy tool.
It is working fine and the data is also getting posted in SAP.
But i am not able to see the processed XML messages using SXMB_MONI.
Can you pls help on this
Regards
Madhan D

Hi,
Goto SXMB_ADMIN->Integration engine configuration-Specific parameters and select RUNTIME-->logging_sync to 1 by default it is 0.
Thanks!

File picked up by sender channel but not seen in CC monitoring nor in moni

Dear All,
It is a file to JDBC scenario where the sender communication channel picks up a file and sends it to several receivers interfaces ( 1 jdbc receiver channel). The file gets picked up by sender communication channel, but problem is that it does not get traced in communication channel monitoring, not even in message monitoring in RWB and SXMB_MONI. Thus no file processing. Sometimes this does not happen and the file gets traced in either of the monitoring tools. Please help as to why would this happen.
The scenario works correctly at times. its configured correctly. Please guide.
Thanks & Regards,
Priyanka Salvi

Hi,
Thanks. No, archiving faulty source files functionaly was not used earlied.
I enabled it by giving a path in the FTP server itself, but no files were placed there in the same case.
Please give me some examples of OS commands.
The file is picked up but it seems it is unable to read/forward for further processing.
This is because after the file is picked up, no messages are found with the outbound interface as well in message monitoring.
I am manually placing the file at the required path and the procsessing mode in CC is delete.
The receiver determination and all other configurations are correct.
I had tried by creating a new sender CC and deactiving the earlied one. Using this files were picked up and processed for few days and now again the same problem.

Messages Not Visible in SXMB_MONI

Dear All,
Now i am doing one file to file scenerio. The file is getting deleted from the source directory but not reaching the target directory. Also, when i am seeing in SXMB_MONI, there is no messages in that. And in the Adapter Monitoring, Source Adapter(File) is specifying that one message is processed but Target Adapter(File) is telling that "no message processing until now".
Please help me to solve this problem.
thanks in advance.
nishu

Hi Nishu,
Go to Runtime Work Bench(RWB) and select Message Monitoring. There select your message by specifying the appropriate date.
Click on the message details to get a detailed view of what happened to your message.
Send us the msg details for more help.
Regards,
Jai Shankar.

Message not showing in SXMB_MONI

Dear All,
I have File - XI - RFC and RFC response - XI - File.
After i put my file in the sender folder, the status in RWB:
- file sender adapter executed successfully.
- file receiver adapter also executed successfully
- RFC receiver also no problem.
I can see my file generated in the receiver path.
The thing is after I refresh t-code SXMB_MONI, i still can't see my messages that just processed. Any possibility why it happened?
Best Regards,
Victor.

Hi Victor,
You have to set parameter LOGGING (type runtime) in TC SXMB_ADM --> Integration Engine Configuration --> Specific Configuration.
This will enable asynchronous messages to be displayed in sxmb_moni.
Do the same with parameter LOGGING_SYNC in order to display synchronous messages.
Carlos
Edited by: Carlos Gonzalez on Oct 9, 2008 10:19 AM

Message Not comming into SXMB_MONI

Hi Friends,
I am doing File - idoc Scenario.
My Sender File adatper is picking source file successfully.
But, when i see in the SXMB_MONI, message is not showing in to the   SXMB_MONI.
when check my Communication Chennel in RWB, its showing Warning like below
"Message Found Empty".
Please anyone tell me what is the problem.
   Regards,
   Vijaya

Hi Vijaya
Please look this link.
/people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
https://www.sdn.sap.com/irj/sdn/weblogs?
blog=/pub/wlg/1629.
hope this will help u ....

Service desk message not seen in SOLMAN

Hi Gurus!
We are creating a service desk message in R\3 system that should be displayed in SOLMAN. But it is not displayed in solution manager. Could you please specify what steps shouls i have to do inorder to get that message displayed.
Thanks in Advance.
Regards,
Kiran

Hi,
did you search with the message number?
If you still don't find it change the selection criteria in CRM_DNO_MONITOR.
Check Destination that you have maintained in R/3 under SM30, for object BCOS_CUST.
Provide as much as info possible when u r posting message on sdn, to get immediate positive response.
Feel free to revert back.
--Ragu

HELP-Incoming messages not seen in Inbox

It seems after installing 10.6.3 a snet.net (now AT&T) mail account (POP3) stopped displaying new messages. No messages are displayed after April 2 at 10:26am. If I select "Get Mail" it tells me those messages are coming in through incoming mail but they don't show up in the inbox (In fact they keep coming in every time it "Gets Mail"--it seems to pull them down from the server over and over "73 messages received" and if I send a test email it will go up to 74). If I select "Account Info" the Account Info window appears and DOES show the messages "Messages on Server" but they never seem to make it to Apple Mails Inbox Window. My three other SNET account Pop3 Inbox/mailboxes work fine. I deleted the account and re-added it and same behavior occurs. Exact same behavior on my laptop as well! Webmail also works fine. This is my work account (of course) and I need this to function. Any help provided would be appreciated. Thank you.

It seems after installing 10.6.3 a snet.net (now AT&T) mail account (POP3) stopped displaying new messages. No messages are displayed after April 2 at 10:26am. If I select "Get Mail" it tells me those messages are coming in through incoming mail but they don't show up in the inbox (In fact they keep coming in every time it "Gets Mail"--it seems to pull them down from the server over and over "73 messages received" and if I send a test email it will go up to 74). If I select "Account Info" the Account Info window appears and DOES show the messages "Messages on Server" but they never seem to make it to Apple Mails Inbox Window. My three other SNET account Pop3 Inbox/mailboxes work fine. I deleted the account and re-added it and same behavior occurs. Exact same behavior on my laptop as well! Webmail also works fine. This is my work account (of course) and I need this to function. Any help provided would be appreciated. Thank you.

Sender RFC Message not seen in sxmb_moni

Similar Messages

Maybe you are looking for