Sender SOAP adapter error 401

Hello All,
Here the scenario is SOAP -> XI -> SAP ECC.
When the webservice is seding the message I am getting error in Sender SOAP channel.
Message is not going to Integration Engine.
Its failing with 401Un Authorized in sender soap adapter channel.My sender soap channel is plain channel with no authentication check and certificated etc.When webservice is seding request to XI its sending wit some usernmae which was there on XI box.I am facing this issue in Quality Env. The same is working fine in Dev box.
Please give me the list of points that I need to check here.
Thanks,
Regards,
Naresh

Hi,
I am facing this issue in Quality Env. The same is working fine in Dev box.
Once the scenario is transported from Dev to QA the location where the Webservice is hosted will also change
Hence you will have to change the target URL .....just the HostName / IP address and the port for all the webservices (that you transported to QA)
Once you are in QA and with no change to the URL the sender (which I suppose is also in QA env) will be still trying to ping the same old Dev-URL....in such situation the sender is bound to get UnAuthorized error....
So one in all change the URL in your WebService to point to QA and then test....
Same logic applicable to QA --> PROD
Regards,
Abhishek.

Similar Messages

Sender Soap Adapter - error

Hi,
I am testing SOAP to RFC Scenario in Quality landscape. I am getting the following error
<?xml version="1.0"?>

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
     <SOAP:Body>
          <SOAP:Fault>
               <faultcode>SOAP:Server</faultcode>
               <faultstring>Server Error</faultstring>
               <detail>
                    <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                         <context>XIAdapter</context>
                         <code>ModuleUnknownException</code>
                         <text><![CDATA[
com.sap.aii.af.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name, MessageServlet(Version $Id: //tc/xi/NW04_16_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#2 $)
     at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:380)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java(Compiled Code))
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Inlined Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java(Compiled Code))
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java(Inlined Compiled Code))
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java(Compiled Code))
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java(Compiled Code))
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
     at java.security.AccessController.doPrivileged1(Native Method)
     at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
          ]]></text>
                    </s:SystemError>
               </detail>
          </SOAP:Fault>
     </SOAP:Body>
</SOAP:Envelope>
Done CPACache refresh 2 times, Done java stack restart, Checked whether URL is correct or not. Almost all checks are done. Still error exists. Any help on this greatly appreciated.
Regards,
Daniel.LA

Hi Daniel,
                There could be error in places
     a) there could be a error in the payload of this message where Receiver agreement wasnt sepcified.
     b) Check in the configuration for this particular Combination if everything rightly defined or not(check CC, Recevier agreement, Serice .etc)............
Solution could be that if there is an error in Conifguration then
1) Make the approperiate changes
2) Activate all the objects
3) Refresh cache
Reward with points if helpful
Regards
Sai Ganesh

Special characters in sender soap adapter provoke HTTP 500 error

Hi,
SAP R3 is sending a SOAP message to PI through SOAP adapter.
When the payload does NOT contain german characters like ü, it works fine.
However, when the payload DOES contain special characters, the SOAP adapter replies with an HTTP 500 code error.
If I use SoapUI to send the soap message, and setting UTF-8 as the encoding in the program options, it will go through fine. If I change to ISO-8859-1 it will fail.
I'm thinking in two options:
- Make sure that SAP R3 sends the message in UTF-8 format (I think this is happening currently), as if SoapUI works, then probably R3 is not using UTF-8.
- Force the adapter to use UTF-8. Is this possible? In the sender SOAP adapter I've added AF_Modules/MessageTransformBean (type local EB), and then Transform.ContentType for parameter name and --> text/plain;charset=utf-8 for parameter value. The sender adapter will fail then for every message, with or without special characters.
Anyway, in this link (http://help.sap.com/saphelp_nwpi71/helpdata/EN/a4/f13341771b4c0de10000000a1550b0/frameset.htm) it seems to say that the sender soap adapter cannot be extended with modules, so maybe that's the reason why it fails when trying to add a module.
Thanks

If I use SoapUI to send the soap message, and setting UTF-8 as the encoding in the program options, it will go through fine. If I change to ISO-8859-1 it will fail.
I'm thinking in two options:
Check the use of option 1 ..... the URL which SAP is using to send the data can containe the encoding information.
Check this SAP note: https://service.sap.com/sap/support/notes/856597
From the above note:
Q: What character encoding is supported by the SOAP sender adapter?
+you can supply the encoding information with the xmlenc variable in the request URL as in+
Regards,
Abhishek.

Sender Soap Adapter communication channel error

Dear Experts,
When i see Sender soap adapter status in Communication channel monitoring.I am getting the status as:
"Processing Errors in the Last 50 Minutes"
Thanx in advance

Aamir,
My other interface is working fine by giving the following url:
http://kpmgvm015:8001/XISOAPAdapter/MessageServlet?channel=:KPMG_AU_ALL:RetrieveOpportunityRecord_SOAP_Sender
I am not using the propsed url.
Moreover when i try to give this url in the browser . It is asking of user id and password.
I am giving user as : PIAPPLUSER.It gives message servelet is ok.
In my communication channel monitoring the corresponsing communication channel:
RetrieveclientRecord_SOAP_Sender is in Red - Processing Errors In the Last 40 Minutes
Error meesage in Webclient:
java.security.AccessControlException: PIAPPLUSER has no permission for accessing binding com.sap.aii.af.service.cpa.Binding@d046043a

SMIME in sender soap adapter

Hi,
I'd like to know the proper format of the POST request to a sender soap adapter with SMIME activated. I've found almost no documentation about it.
I'm trying to send a document ciphered to PI via soap adapter (HTTP POST). I've done the following steps
1. I activate SMIME in the sender soap adapter, and I specify "Decrypt" as the security procedure in the sender agreement. I also incorporate the private key in the keystore DEFAULT and reference to it in the sender agreement.
2. I use OpenSSL to cipher an xml document like this (I use the public certificate associated to the previous private key) :
--> openssl smime -encrypt -in fich.txt -out fich_encrypted.txt certTesting.pem
What I get is:
MIME-Version: 1.0
Content-Disposition: attachment; filename="smime.p7m"
Content-Type: application/x-pkcs7-mime; smime-type=enveloped-data; name="smime.p7m"
Content-Transfer-Encoding: base64
MIIC....[base64 content of the file encrypted]
3. I use CURL to send the HTTP POST request to PI. Previously I get the binary file from the base64 content.
> POST /XISOAPAdapter/MessageServlet?senderParty=&senderService=BC_1[...]
> Authorization: Basic c2U[...]
> Host: pi.[...].com:50000
> Accept: /
> Content-Type: application/pkcs7-mime; smime-type=enveloped-data; name=fich_encrypted.der
> User-Agent: Jakarta Commons-HttpClient/3.1
> Accept-Encoding: text/xml
> Content-Disposition: attachment; filename=fich_encrypted.der
> Content-Length: 620
> Expect: 100-continue
but I get this error from the SOAP Adapter:
--> java.io.IOException: invalid content type for SOAP: APPLICATION/PKCS7-MIME.
I also get the same error if I remove the header Content-Disposition.
4. If I send the xml file without ciphering (header Content-Type: text/xml;charset=UTF-8) I get the error:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: call failed: java.lang.SecurityException: Exception in Method: VerifySMIME.run(). LocalizedMessage: SecurityException in method: verifySMIME( MessageContext, CPALookupObject ). Message: IllegalArgumentException in method: verifyEnvelopedData( ISsfProfile ). Wrong Content-Type: text/xml;charset=UTF-8. *Expected Content-Type: application/pkcs7-mime or application/x-pkcs7-mime*. Please verify your configuration and partner agreement
PROBLEM --> I really don't know what the SOAP sender channel is expecting when SMIME is activated. I've tried to send the binary file encripted as an attachment and also directly, but the soap adapter complains.
Thanks

HI,
for XI EP
Please see the below links so that you can have clear Idea..
/people/saravanakumar.kuppusamy2/blog/2005/02/07/interfacing-to-xi-from-webdynpro
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/java/integrating%20web%20dynpro%20and%20sap%20xi%20using%20jaxb%20part%20ii.article
Consuming XI Web Services using Web Dynpro Part II-/people/riyaz.sayyad/blog/2006/05/08/consuming-xi-web-services-using-web-dynpro-150-part-ii
Consuming XI Web Services using Web Dynpro Part I -/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
/people/sap.user72/blog/2005/09/15/creating-a-web-service-and-consuming-it-in-web-dynpro
/people/sap.user72/blog/2005/09/15/connecting-to-xi-server-from-web-dynpro
Regards
Chilla..

XI 3.0 Sender SOAP Adapter Default XI Parameters

Hi all,
I've noticed when posting to an inbound comm channel using the sender SOAP adapter that unless I specify a namespace and interface under the 'Default XI Parameters', an error is returned indicating I need to specify default values for the namespace and interface.
This doesn't make sense. I don't want to set up a new inbound comm channel for every interface for the same sender service. As long as the SOAP address location is correct, i.e. sender service and interface are specified correctly, why should I need to set a default namespace and interface? Also, what is the expected behavior of the default XI parameters? Should it override what's passed in the SOAP location string?

Hi,
I think you have to add:
Optional: xml.addHeaderLine 0
Obligatory: try to put the ; between quotation marks like:
Hope this helps.
Cheers,
Paul

Failed in Message Mapping for Sender SOAP Adapter

I am using a synchronous Sender SOAP adapter for sending SOAP messages using HTTP security protocol. I am trying to send SOAP messages to XI and then to RFC-R/3. And Responses back from RFC to XI and then to SOAP. I am getting an error for failed in message mapping in SXMB_MONI for converting SOAP messages to RFC. When I debug it in Message Mapping in Integration Repository, it works fine.
Any help is appreciated.
Thanks in advance!
Mrudula

Hi,
try to do a full cache refresh
regards,
Jakub

Sender SOAP Adapter problem in PI 7.1

Hello Everyone,
I have a problem with Sender SOAP Adapter
In PI 7.0 i am able to receive the messages through sender SOAP Adapter for both HTTP and HTTPS. But when i am testing in PI 7.1 i am unable to receive any messages at Adapter level for both HTTP and HTTPS
All sender leagcy system are getting different error messages like
1. 400 HTTP Bad request.
2. Invalid request.
3. BAPI error message
Could any one please assist me in this problem.
Thanks
Vick

Hi Vick,
Try like this......in ID from your sender agreement in which you have your sender SOAP comm channel, from menu select Display WSDL and then copy the WSDL URL and give it to source applications to use it.............create a service user for them to access PI 7.1 server while sending the SOAP req msg.............
your source applications may have to generate proxy from this WSDL URL in their application and then they can send a SOAP req msg to your PI 7.1 server............
Regards,
Rajeev Gupta

Sender SOAP Adapter, inconsistent behavior

Hi,
We are using XI 3.0 SP17. We have noticed some inconsitent behavior with the sender SOAP adapter:
When sending a valid SOAP message to the adapter, it will reply with:
<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Header/><SOAP:Body/></SOAP:Envelope>
To me this seems errornous, becuase it is missing "<?xml version='1.0'?>" in the beginning, and thus is not valid XML. This leads to errors on the Client that is sending messages to the Sender SOAP adapter.
When sending an errornous SOAP message from the client to the XI Sender SOAP adapter, the error message does include the "<?xml version='1.0'?>" + the corresponding error message, so the behavior seems inconsitent and errournous.
Can someone tell me how the get the Sender SOAP Adapter to include "<?xml version='1.0'?>" in the reply for valid SOAP messages?
Thanks for any help on this subject!
-Hans
PS: Here is an example of an error message from the Sender SOAP adapter, that does include the xml header:
<?xml version="1.0"?>

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
     <SOAP:Body>
          <SOAP:Fault>
               <faultcode>SOAP:Server</faultcode>
               <faultstring>Server Error</faultstring>
               <detail>
                    <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                         <context>XIAdapter</context>
                         <code>MalformedMessageException</code>
                         <text><![CDATA[Unexpected content in SOAP:Body; nested exception caused by: com.sap.aii.messaging.util.XMLScanException: Unexpected content in SOAP:Body\tat com.sap.aii.messaging.mo.Message.reparseRootDocument(Message.java:1014)\tat com.sap.aii.messaging.net.MIMEInputSource.readSOAPPart(MIMEInputSource.java:619)\tat com.sap.aii.messaging.net.MIMEInputSource.decodePart(MIMEInputSource.java:611)\tat com.sap.aii.messaging.net.MIMEInputSource.readBody(MIMEInputSource.java:379)\tat com.sap.aii.messaging.net.MIMEServletInputSource.parse(MIMEServletInputSource.java:58)\tat com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:378)\tat javax.servlet.http.HttpServlet.service(HttpServlet.java:760)\tat javax.servlet.http.HttpServlet.service(HttpServlet.java:853)\tat com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)\tat com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)\tat com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)\tat com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)\tat com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)\tat com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)\tat com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)\tat com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)\tat com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)\tat com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)\tat com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)\tat java.security.AccessController.doPrivileged(AccessController.java:180)\tat com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)\tat com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)          ]]></text>
                    </s:SystemError>
               </detail>
          </SOAP:Fault>
     </SOAP:Body>
</SOAP:Envelope>

Hi,
"Do not use SOAP Envelope" is not really an option for us.
From help.sap.com:
If the indicator is set, the adapter expects a message without a SOAP envelope.
If you have set the indicator, you must also enter nosoap=true in the URL.
The adapter then puts the whole message in the XI payloads
So this also requires heavy changes to the client side. It would almost make more sense to use the plain HTTP adapter in that case..
-Hans

Duplicate check not working in sender soap adapter

Hi guys,
I have an urgent problem. I am using a Sender Soap Adapter (quality of service Best Effort) to receive certain web services requests and send back synchronous responses.
I have ticked the parameters "Use Encoded Headers" and "Use Query String" to implement duplicate check.
For this reason I am expecting XI to return errors of the following type when the sender systems posts duplicates:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="PERSIST">MSGGUID_EXISTING</SAP:Code>
<SAP:P1>D00B71AC7AEBDEB3E011E5E43C49D97B</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID D00B71AC7AEBDEB3E011E5E43C49D97B for pipeline CENTRAL, version already exists in system</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
However, although the duplicates go into an error status, the system is responding with the following message:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An internal error has occurred</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Can anybody tell me how to force XI to return a message type "MSGGUID_EXISTING" when it catches duplicates? Or if there is any configuration I can change?
Many thanks,
Aldo

OK, this problem is resolved.
XI seams to send the error SYSTEM_FAILURE_INTERNAL the first time it receives a duplicate message and sends the MSGGUID_EXISTING error on the following attempt to post the same message.
Cheers.
Aldo
Edited by: Aldo Lazzarini on Sep 23, 2011 6:50 AM
Edited by: Aldo Lazzarini on Sep 23, 2011 6:53 AM

TO Get Ensuring Exactly Once Processing data from sender soap adapt

To XI Specialists
Now Im trying to get Ensuring Exactly Once Processing data from sender soap adapteter.
My plan is that send data from Receiver adapter, to Sender adapter by SOAP.
(1st interface is ABAP to Soap "BE", 2nd interface is Soap to File "EO")
Sender SOAP adapter will returun Ensuring Exactly Once Processing data.
(see SAP HELP, http://help.sap.com/saphelp_nw70/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm )
AND I want to get Ensuring Exactly Once Processing data, I want to determine what to do in ABAP proxy.
SO I made and tested 2interface. but error occuered.
I checked the error, and Now I know what is the cause.
The cause is that Ensuring Exactly Once Processing data didnt enter the payload, at Receiver Adapter.
1st interface coulnt get the payload data, so mapping error occuered....
Please give me help,
<b>"How to get Ensuring Exactly Once Processing data From Sender SOAP ADAPTER"</b>
or
<b>"How to enter Ensuring Exactly Once Processing data into Payload of Receiver SOAP ADAPTER"</b>
and more excelent way....
our XI is version7.0 and SP10
Please teach me your wisdom!
Naoki Kurihara

I seeked and I noticed that
maybe I catched the message but the message dont have payload.
so I got no_payload error.
I checked SAP note.
I noticed, no_payload error will be managed to nomal message at SP13....
my XI is SP12....
I ll seek for another way!!
Thank you! noaki

Redeploy sender soap adapter 7.1

We have PI 7.1 SP7 and expriencing many problems with the sender SOAP adapter
the service registry works for us for all web services
but from other applications like xmlspy and soapui we get messages of chace problems and unauthorized
( all cache cheks where performed and if I use the url of the endpoint with the user I have no authorization error )
it seems something is wrong with the adapter , does somebody knows if its possible to redploy the adapter ? its a war file

Hi Shai,
Please have a look at the following link and see if it helps you .
It deals with SOAP adapter installation and activation
Re: SOAP adapter installation and activation
Best Regards
Edited by: Prakash Bhatia on May 8, 2009 11:51 AM

IOException: invalid content type for SOAP: TEXT/ using Sender SOAP adapter

Hi all,
When I am using Sender SOAP adapter, i am getting (MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML using connection SOAP_http://sap.com/xi/XI/System) exception.
From my RWB I can see:
2009-05-25 16:18:39 Information The message was successfully retrieved from the call queue.
2009-05-25 16:18:39 Information The message status was set to DLNG.
2009-05-25 16:18:39 Error Failed to parse the XI system response.
2009-05-25 16:18:39 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIMessage creation failed (inbound). Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML using connection SOAP_http://sap.com/xi/XI/System.
2009-05-25 16:18:39 Error The message status was set to FAIL.
2009-05-25 16:18:39 Error Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIMessage creation failed (inbound). Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML
Please help if possible! Thanks!
Mayank

Hi,
Check in SLD your integration engine business system have the following
pipeline url : http://server:httpport/sap/xi/engine?type=entry
check Http port also
After that go to TCODE - SXMB_ADM - integrationn engine configuration and check if your server is configured as HUB with the same url or not.
Thanks
Kasturika Phukan

Remove authentication in sender soap adapter pi 7.1

Hello
Did anyone manged to remove authentication in PI 7.1 sender soap adapter?
I have updated file web.xml in the file com.sap.aii.adapter.soap.war
and now I want to deploy it,but I dont have any sda in the folder
thx
Shai

hi Shai,
just something to try in case:
you don't need any java parameters of SOAP sender
you can try approach from Stefan:
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
and then:
1. in SICF copy the engine service to a new one
2. put the credentials for this new service inside SICF
then you will have sender SOAP adapter without a password right?
I didn't try it but I guess it would work without
crashing the whole original SOAP sender adapter by
making changes into web.xml
Regards,
Michal Krawczyk

Change Queue Name in Sender Soap Adapter (or make it dynamic)

Hello SDN!!!!
We have a scenario where we want to make a message EOIO and I have set the Queue Name in the Sender Soap Adapter and this works great. BUT it is needed to have a more specific queue name (based on order numbers not interface name) So with this being said, Is there any way to change the queue name or append to it from the Soap Sender Adapter. I see it is possible to write a Module Bean, but the Message object returned from the ModuleContext is a scaled down version of the normal message object. Any help would be greatly appreciated
Cheers
Devlin

Is this the only way to change the queue name for Soap Sender? I don't think it is possible for them to do this, as their urls are static when calling us

Sender SOAP adapter error 401

Similar Messages

Maybe you are looking for