Sender SOAP Adapter Modules!

Hi Can anyone guide me how to write a Sender SOAP adapter module ?

Hi Pooja, thanks for the reply I have seen that.
Please look at the below forum.
SOAP Adapter and plain HTTP
It says "When you write a module for sender SOAP adapter, you have to deal with the incoming message, as the SOAP adapter first calls the customer module, then creates the XI message."

Similar Messages

Can we enhance the Sender SOAP Adapter with our own modules?

Hi All,
Can we enhance the Sender SOAP Adapter with our own modules on the Module Tab Page in the Module Processor?
I believe the answer is no. However, whatever may be the answer, I would like to know that is there any specific reason for that.
Please help me in this regard.
Thanks,
Yogi.

Hi,
I think, we are mentioning the URL of the adapter channel directly in the configuration. SO there is no place we can customize this flow..just a thought
Because in the file adapter etc, After Adapter Engine picks up the data and before it goes into integration engine module is processed..
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f013e82c-e56e-2910-c3ae-c602a67b918e
Rgds,
Moorthy

Change Queue Name in Sender Soap Adapter (or make it dynamic)

Hello SDN!!!!
We have a scenario where we want to make a message EOIO and I have set the Queue Name in the Sender Soap Adapter and this works great. BUT it is needed to have a more specific queue name (based on order numbers not interface name) So with this being said, Is there any way to change the queue name or append to it from the Soap Sender Adapter. I see it is possible to write a Module Bean, but the Message object returned from the ModuleContext is a scaled down version of the normal message object. Any help would be greatly appreciated
Cheers
Devlin

Is this the only way to change the queue name for Soap Sender? I don't think it is possible for them to do this, as their urls are static when calling us

Special characters in sender soap adapter provoke HTTP 500 error

Hi,
SAP R3 is sending a SOAP message to PI through SOAP adapter.
When the payload does NOT contain german characters like ü, it works fine.
However, when the payload DOES contain special characters, the SOAP adapter replies with an HTTP 500 code error.
If I use SoapUI to send the soap message, and setting UTF-8 as the encoding in the program options, it will go through fine. If I change to ISO-8859-1 it will fail.
I'm thinking in two options:
- Make sure that SAP R3 sends the message in UTF-8 format (I think this is happening currently), as if SoapUI works, then probably R3 is not using UTF-8.
- Force the adapter to use UTF-8. Is this possible? In the sender SOAP adapter I've added AF_Modules/MessageTransformBean (type local EB), and then Transform.ContentType for parameter name and --> text/plain;charset=utf-8 for parameter value. The sender adapter will fail then for every message, with or without special characters.
Anyway, in this link (http://help.sap.com/saphelp_nwpi71/helpdata/EN/a4/f13341771b4c0de10000000a1550b0/frameset.htm) it seems to say that the sender soap adapter cannot be extended with modules, so maybe that's the reason why it fails when trying to add a module.
Thanks

If I use SoapUI to send the soap message, and setting UTF-8 as the encoding in the program options, it will go through fine. If I change to ISO-8859-1 it will fail.
I'm thinking in two options:
Check the use of option 1 ..... the URL which SAP is using to send the data can containe the encoding information.
Check this SAP note: https://service.sap.com/sap/support/notes/856597
From the above note:
Q: What character encoding is supported by the SOAP sender adapter?
+you can supply the encoding information with the xmlenc variable in the request URL as in+
Regards,
Abhishek.

Sender SOAP Adapter: zipped Payload or zipped Attachement possible?

Hi,
I've a SOAP --> PI --> Proxy Scenario. As the payload of the message can become quite huge (around 10MB), I'd like to zip the message.
From the documentation it's not clear for me if the Sender SOAP Adapter can be enhanced with the standard PayloadZipBean:
"You cannot add your own modules to this adapter" --> so is it possible to use modules provided by SAP?
If it's not possible: is there another way to send the message zipped via SOAP, e.g. as a additional attachement to the SOAP message, and to unzip the attachement / use the content of it as message payload for mapping?
Please note: usage of SOAP is a must for that scenario.
Best regards
Holger

> File size is a question due to limited network speed between sender and PI. If I can reduce the data package to be transferred, it'd be a big help. Therefore I'd like to zip the message.
In this case it would be sufficient to use Content-Encoding gzip.
This is part of the HTTP protocol and will be unzipped automatically by the HTTP framework, so you need not do anything special in SOAP adapter.
See http://tools.ietf.org/html/rfc2616#section-14.11
Check if your SOAP client is able to use that.
Regards
Stefan
Edited by: Stefan Grube on Mar 31, 2009 2:11 PM

Enabling HTTPS with Client Authentication for Sender SOAP Adapter on PI7.1

Hello All,
We are currently building up a HTTPS message exchange with an external client.
Our PI 7.1 recieved over HTTPS messages on an already configured Sender SOAP Adapter.
The HTTPS (SSL) connectivity works fine and was completely configured on the ABAP Stack at Trust Manager (TC=STRUSTSSO2)
Login to Message Servlet "com.sap.aii.adapter.soap.web.MessageServlet is required and works fine with user ID and password.
Now we have to configure the addtional Client Authentication.
At SOAP Adapter (Sender Communication Channel) under "HTTP Security Level"you are able to configure "HTTPS with Client Authentication".
But what are the next steps to get this scenario successfully in place?
Many thanks in advance!
Jochen

Hi Colleagues,
following Steps still have to be done:
- Mapping public key to technical user at Java Stack
As preparation you have to activate value "ume.logon.allow.cert" with true under "com.sap.security.core.ume.service" under Config Tool. At NWA under Identity Management at for repecively technical user the public key certificate
- Be sure CA root certivicate at Database under STRUSTSSO2
- Import intermediate Certificate under Certificate List at Trast Manager for the Respecive Server Note
- use Login Module "client_cert" which you have to configure under NWA\Configuration Management\Authentication for Components "sap.com/com.sap.aii.adapter.soap.app*XISOAPAdapter".
Many thanks to all for support!
Regards,
Jochen

Sender SOAP adapter: get soap header data

Hi,
I've been going through various posts and blogs here on SDN + looked in the how to guide for SOAP adapter, but still find it quite difficult to actually find out how to do it. I've tried to follow recommendations seen, but it doesn't add up.
So can someone please tell me how to get an element situated in the SOAP header of the request sent to XI via sender soap adapter?
Let's for instance say the request looks like this:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <SOAP-ENV:Header>
          <SSN>1234567890</SSN>
     </SOAP-ENV:Header>
     <SOAP-ENV:Body>
          <event>
               <elem1>data 1</elem1>
               <elem2>data 2</elem2>
               <elem3>data 3</elem3>
          </event>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
How can I get the data in the SSN-header element at mapping time?
I'm sure this can be done by using adapter modules as the first step adapter, but I prefer doing it at mapping time if possible.
Best Regards,
Daniel

I solved it on my own now. My missing link was the fact that I'm using XMLSPY to send request and thus need to replace all '&' with & in Connection Endpoint.
Message was edited by:
        Daniel Engsig-Karup

Sender SOAP Adapter - XMLAnonymizerBean

Hi All,
I am trying to use XMLAnonymizerBean in " sender SOAP Adapter " with out much luck .
Even though I have enter the bean in the module chain , the xml o/p to the mapping program is still
continuing to have namespaces which I was trying to remove.
If some body has tried this out , could you kindly confirm if XMLAnonymizerBean could be used or
not in a Sender SOAP Adapter.
Many thanks
KLK

This blog says - "It is not possible to use this module in the sender SOAP adapter as this adapter type does not support any additional modules. "
/people/stefan.grube/blog/2007/02/02/remove-namespace-prefix-or-change-xml-encoding-with-the-xmlanonymizerbean
Regards,
Ravi

Remove authentication in sender soap adapter pi 7.1

Hello
Did anyone manged to remove authentication in PI 7.1 sender soap adapter?
I have updated file web.xml in the file com.sap.aii.adapter.soap.war
and now I want to deploy it,but I dont have any sda in the folder
thx
Shai

hi Shai,
just something to try in case:
you don't need any java parameters of SOAP sender
you can try approach from Stefan:
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
and then:
1. in SICF copy the engine service to a new one
2. put the credentials for this new service inside SICF
then you will have sender SOAP adapter without a password right?
I didn't try it but I guess it would work without
crashing the whole original SOAP sender adapter by
making changes into web.xml
Regards,
Michal Krawczyk

SMIME in sender soap adapter

Hi,
I'd like to know the proper format of the POST request to a sender soap adapter with SMIME activated. I've found almost no documentation about it.
I'm trying to send a document ciphered to PI via soap adapter (HTTP POST). I've done the following steps
1. I activate SMIME in the sender soap adapter, and I specify "Decrypt" as the security procedure in the sender agreement. I also incorporate the private key in the keystore DEFAULT and reference to it in the sender agreement.
2. I use OpenSSL to cipher an xml document like this (I use the public certificate associated to the previous private key) :
--> openssl smime -encrypt -in fich.txt -out fich_encrypted.txt certTesting.pem
What I get is:
MIME-Version: 1.0
Content-Disposition: attachment; filename="smime.p7m"
Content-Type: application/x-pkcs7-mime; smime-type=enveloped-data; name="smime.p7m"
Content-Transfer-Encoding: base64
MIIC....[base64 content of the file encrypted]
3. I use CURL to send the HTTP POST request to PI. Previously I get the binary file from the base64 content.
> POST /XISOAPAdapter/MessageServlet?senderParty=&senderService=BC_1[...]
> Authorization: Basic c2U[...]
> Host: pi.[...].com:50000
> Accept: /
> Content-Type: application/pkcs7-mime; smime-type=enveloped-data; name=fich_encrypted.der
> User-Agent: Jakarta Commons-HttpClient/3.1
> Accept-Encoding: text/xml
> Content-Disposition: attachment; filename=fich_encrypted.der
> Content-Length: 620
> Expect: 100-continue
but I get this error from the SOAP Adapter:
--> java.io.IOException: invalid content type for SOAP: APPLICATION/PKCS7-MIME.
I also get the same error if I remove the header Content-Disposition.
4. If I send the xml file without ciphering (header Content-Type: text/xml;charset=UTF-8) I get the error:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: call failed: java.lang.SecurityException: Exception in Method: VerifySMIME.run(). LocalizedMessage: SecurityException in method: verifySMIME( MessageContext, CPALookupObject ). Message: IllegalArgumentException in method: verifyEnvelopedData( ISsfProfile ). Wrong Content-Type: text/xml;charset=UTF-8. *Expected Content-Type: application/pkcs7-mime or application/x-pkcs7-mime*. Please verify your configuration and partner agreement
PROBLEM --> I really don't know what the SOAP sender channel is expecting when SMIME is activated. I've tried to send the binary file encripted as an attachment and also directly, but the soap adapter complains.
Thanks

HI,
for XI EP
Please see the below links so that you can have clear Idea..
/people/saravanakumar.kuppusamy2/blog/2005/02/07/interfacing-to-xi-from-webdynpro
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/java/integrating%20web%20dynpro%20and%20sap%20xi%20using%20jaxb%20part%20ii.article
Consuming XI Web Services using Web Dynpro Part II-/people/riyaz.sayyad/blog/2006/05/08/consuming-xi-web-services-using-web-dynpro-150-part-ii
Consuming XI Web Services using Web Dynpro Part I -/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
/people/sap.user72/blog/2005/09/15/creating-a-web-service-and-consuming-it-in-web-dynpro
/people/sap.user72/blog/2005/09/15/connecting-to-xi-server-from-web-dynpro
Regards
Chilla..

How to use Basis Authentication in Sender SOAP Adapter

We implemented one Sender SOAP Adapter and we had to implement the modified WEB.XML method to remove the security specification. We have now asked the developer to correct this situation so we can remove this modification. The Interface developer would like to use Basic Authentication. If you have an automated interface sending in a SOAP Message, how do you do Basic Authentication?
I've tried using:
http://host:port/XISOAPAdapter/MessageServlet?channel=:<Service>:<Channel>&sap-user=xiappluser&sap-password=<Password>&sap-language=EN&sap-client=<Client>
When I do this, I still get the Authentication Pop-Up Window.
How does the Sending Interface either supply the ID and Password on the incoming SOAP Message or respond to the Authentication Pop-Up?
Thanks,
Anne

By Defualt the web service exposed by you will use Basic Authentication mode only.
But the way you do Basic Authentication in the web client is platfrom dependent.
This is not the way to do Basic authentication
http://host:port/XISOAPAdapter/MessageServlet?channel=:<Service>:<Channel>&sap-user=xiappluser&sap-password=<Password>&sap-language=EN&sap-client=<Client>
I am providing you a code snippet on how to Basic Authentication in Java when making the Web Service Call.
If the client is on some other platform just look for the corresponding api.
Please award points if you find this answer useful.
Code Snippet
URL url = new URL(URL);
URLConnection connection = url.openConnection();
if( connection instanceof HttpURLConnection )
((HttpURLConnection)connection).setRequestMethod("POST");
     //connection.setRequestProperty("Content-Length",Integer.toString(content.length()) );
     connection.setRequestProperty("Content-Type","text/xml");
     connection.setDoOutput(true);
     String password = User + ":" + Password ;
      //Where con is a URLConnection
     connection.setRequestProperty ("Authorization", "Basic " + encode(User + ":"+ Password));
     connection.connect();
Encode Method
public static String encode (String source) {
BASE64Encoder enc = new sun.misc.BASE64Encoder();
return(enc.encode(source.getBytes()));

XI 3.0 Sender SOAP Adapter Default XI Parameters

Hi all,
I've noticed when posting to an inbound comm channel using the sender SOAP adapter that unless I specify a namespace and interface under the 'Default XI Parameters', an error is returned indicating I need to specify default values for the namespace and interface.
This doesn't make sense. I don't want to set up a new inbound comm channel for every interface for the same sender service. As long as the SOAP address location is correct, i.e. sender service and interface are specified correctly, why should I need to set a default namespace and interface? Also, what is the expected behavior of the default XI parameters? Should it override what's passed in the SOAP location string?

Hi,
I think you have to add:
Optional: xml.addHeaderLine 0
Obligatory: try to put the ; between quotation marks like:
Hope this helps.
Cheers,
Paul

Failed in Message Mapping for Sender SOAP Adapter

I am using a synchronous Sender SOAP adapter for sending SOAP messages using HTTP security protocol. I am trying to send SOAP messages to XI and then to RFC-R/3. And Responses back from RFC to XI and then to SOAP. I am getting an error for failed in message mapping in SXMB_MONI for converting SOAP messages to RFC. When I debug it in Message Mapping in Integration Repository, it works fine.
Any help is appreciated.
Thanks in advance!
Mrudula

Hi,
try to do a full cache refresh
regards,
Jakub

Sender SOAP Adapter problem in PI 7.1

Hello Everyone,
I have a problem with Sender SOAP Adapter
In PI 7.0 i am able to receive the messages through sender SOAP Adapter for both HTTP and HTTPS. But when i am testing in PI 7.1 i am unable to receive any messages at Adapter level for both HTTP and HTTPS
All sender leagcy system are getting different error messages like
1. 400 HTTP Bad request.
2. Invalid request.
3. BAPI error message
Could any one please assist me in this problem.
Thanks
Vick

Hi Vick,
Try like this......in ID from your sender agreement in which you have your sender SOAP comm channel, from menu select Display WSDL and then copy the WSDL URL and give it to source applications to use it.............create a service user for them to access PI 7.1 server while sending the SOAP req msg.............
your source applications may have to generate proxy from this WSDL URL in their application and then they can send a SOAP req msg to your PI 7.1 server............
Regards,
Rajeev Gupta

Reading parameters from Query string : Sender SOAP adapter.

Hello Experts,
I have a SOAP to SOAP scenario. Here we will have multiple receivers and dynamic receiver determination is needed.
The sender will send a Value in Query string of URL to sender SOAP adapter. This value in Query string parameter will decide the receiver at runtime.
I need to know, how can we read values from Query string of incoming call? I did tried to search blogs & forum threads but unfortunately not able to hit the right links.
Any inputs will be of great help.
Should i use "Use Query String" on sender soap channel? I tried it, but i was not able to find any query string parameters in SOAP header or payload.
Please guide me, its bit urgent.
Regards,
Abhi.

> But the argument provided from their side is: They are using standard XSD and this service is provided out of box with sender application.
If they can add a URL parameter, they can also add a field to the structure.
> They cant control the value mapping of parameters in payload to the extent required to implement this change.
Adding a new field to the structure would not affect any existing mapping.
> Since they have this custom requirement of multiple receivers & receiver to be determined at runtime, they need to go for Query string.
This can be done based on any field of the payload.
> I need to find a way to read the query string in any case.
This is not supported by SOAP adapter.
> Can I use one of the header parameters to be mapped to this value (By selecting "Use Query string" & "Keep Headers" flag in sender CC) & then extract this value from header using Dynamic configuration ?
This feature works only for XI header fields, like message ID or QoS.
Not for individual parameters.

Sender SOAP Adapter Modules!

Similar Messages

Maybe you are looking for