Sender WF-BATCH issue

Hi All,
I have gone through many forums but didn't find the exact solution to my problem. Actually we have configured E recruitment EHP4 but my all approvers in their SAP UWL receiving workitems from administrator instead of initiator of workflow and the same configuration is working fine in Development server and workitems come with the name of initiator .
We have configured SWU3 also in dev server and production server but in production server it is creating this issue , pls let me know if there is some setting for changing our WF-BATCH user so that approvers receive mails from Initiator rather than administrator.
Thanks and regards,
Soni.

Hi Soni,
It can never happen that your are getting mails in DEV from initiator's ID and in PRD from WF-BATCH ID with the same settings done in both.
To resolve your issue -
1) If you are using SEND MAIL step type in workflow, then mails will go from WF-BATCH id only.
2) If you are using Function Module to send the mail, then set the sender's email id to the one as that of Initiator' id.
3) If you are using standard report RSWUWFML2 or something, then mails will go from that ID always by using which you schedule the background job.
Please check your settings in both the systems thoroughly in DEV as well as in PRD.
Regards,
Guddan

Similar Messages

Sending IDoc Batches to SAP: Issue with Header Mapping for SNDPRN

We are sending batched IDocs from XI to SAP. We need the individual IDocs to reflect different SNDPRN values. Our mapping creates the different IDoc EDI_DC40 record correctly with different SNDPRN values. However, XI wipes out the SNDPRN values in the payload. When we define Header mapping to get the Sender Party as the XPath to the SNDPRN in the payload, then the header mapping errors out because the XPath returns multiple values.
I wanted to know if anyone has successfully implemented sending IDoc batches to SAP from XI with different SNDPRN values.
Your feedback is appreciated.
Jay Malla
Licensed To Code
Genentech SAP XI Team

Hello,
I have the same problem. I want XI send an IDOC with the SNDPOR, SNDPRT and the SNDPRN that are in the EDIDC40.
I find this in sap.help : 
Mapping
The IDoc adapter does not make any special demands on mapping. The IDoc adapter must simply be provided with an IDoc XML structure at the Integration Server outbound channel. This either already exists or must be generated by using a mapping.
If the IDoc XML structure contains a control record, it is deleted and created again by the IDoc adapter. If you want to include additional values in the control record, you must select the Apply Control Record Values from Payload checkbox in the parameters in the communication channel and provide a corresponding mapping for the values.
You can include the values from the following fields in your IDoc control record:
MESCOD, MESFCT
TEST
EXPRESS
STD, STDVRS, STDMES
SNDSAD, SNDLAD
RCVSAD, RCVLAD
REFINT, REFGRP, REFMES
http://help.sap.com/saphelp_nw04/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/frameset.htm
Perhaps we must use party configuration but I don't know how do this !
Regards,
Chris

EDI batching issue while handling the exception.

I am trying to batch the inbound IDOC message coming throught external release as the requirement is to batch the EDI messages
for every IDOC having multiple BGM's. For eg if the 1st IDOC has 4 BGM's and second Idoc has 3 BGM's there should be 2 different batches
of EDI each for 1 idoc.
Achived this using external release trigger and delay mechanism, however if suppose the 1st Idoc fails to process in the 3rd message due to mapping
issue then the previous 2 BGM's and already sent to the messagebox and subscribed by the batching orchestration. And when the second message is arriving
with suppose 3 BGM's, the 2 BGM's are getting batched with them..
For eg : 1st IDOC - 4 BGM repeating record -- 3rd is failed in orchestration looping but previous 2 are already sent to messagebox and subscribed by batching orchestration
2nd IDOC - with 3 BGM are processed successfully and then releasing an external trigger making the previous 2 also to get batched with the 2nd IDOC.
My requirement is if there is any mapping issue then the previous BGM's which are sent should not get batched by the batching orchestration.
Could anyone please suggest on the same?

If third message fails, what do you want to do with previous messages? I think your batching orchestration should deal with incomplete batch after a period of time. You anyways won't be able to retrieve idoc second time.
Secondly, It looks like you want to build create atomatic type of solution, for this you need to have one buffering place where you keep all successfully mapped messages intermediately. Again you need control message mechanism to notify batch complete etc.
(Perhaps you need to explore more on batching orchestration itself).
Another thing, if sap doesn't send single batch into multiple idocs, then you can probably create an orchestration to create whole batch and send control message to trigger edi batching.
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks !

Bellsouth "send" e-mail issues

I am having a Bellsouth send e-mail issue that has cropped up in the past couple of weeks (no changes in settings on my side). Don't know if it has anything to do with Bellsouth's conversion to AT&T or not.
Basically, I can receive e-mail and send newly created, blank e-mail. However, I am unable to send e-mail with attachments or reply to e-mails received or forward e-mails received.
I tried a suggestion of changing the port number from 25 to 587 to no avail. I confirmed my Preference setups with Bellsouth tech support and they say everything is configured OK. Thinking it might be Apple Mail, I downloaded and used the Thunderbird e-mail client, but that exhibits the same problems noted above (similar message about problems with the STMP server or the server is unavailable or is refusing STMP connections. Again, this only happens with certain types of sent e-mails noted above).
I am at a complete loss and don't know what to try next. Any suggestions????

Robert Daddario wrote:
I am having a Bellsouth send e-mail issue that has cropped up in the past couple of weeks (no changes in settings on my side). Don't know if it has anything to L"*_ with attachments or reply to e-mails received or forward e-mails received.
I tried a suggestion of changing the port number from 25 to 587 to no avail. I confirmed my Preference setups with Bellsouth tech support and they say everything is configured OK. Thinking it might be Apple Mail, I downloaded and used the Thunderbird e-mail client, but that exhibits the same problems noted above (similar message about problems with the STMP server or the server is unavailable or is refusing STMP connections. Again, this only happens with certain types of sent e-mails noted above).
I am at a complete loss and don't know what to try next. Any suggestions????
I had problems when I converted to Mac last Spring, and most of the problems came from the DSL Tech Support Team.
Please make sure that your settings haven't changed from the following.
Go to Mail - Accounts
POP Acct Incoming Server: mail.bellsouth.net
SMTP - Outgoing Mail Server: mail.bellsouth.net
Click on Server Settings:
Sever Port Should Be: 25
Make sure SSL - Secure Sockets Layer Is *NOT Selected*
Click OK
Select Addvanced on the upper right of the Accounts Tab.
Port should be : 110
*Do Not Select* Use SSL
Make sure the following are selected:
1) Enable This Account
2) Include When Automatically Checking For New Mail
3) Remove Copy From Server After Retrieving A Messagee
Hope this helps.
I work for at&t - formerly BellSouth, and we haven't done any email transformations for our FastAccess customers, and I'm sure that when we do a Transformation, you will have Dual (bellsouth -at&t) emails for a while so you can advise Family and Friends.

Does anyone have an email address to send a security issue to apple?

found something they should know about (if they don't already) and wonder how to tell them... tried calling... no real email's listed... it's not a bug that hasn't already hit them in the past but still don't wanna post it on the boards.
so my question is: anyone know a valid email address that i can send a security issue about the iphone to?

http://www.apple.com/support/security/

Can any body send me some issues about mail sending .

can any body send me some issues about mail sending .
thanks alot !
mail to :[email protected]

HI
GOOD
GO THROUGH THIS CODE
REPORT ZTSAPMAIL.
DATA: X_OBJECT_TYPE LIKE SOOD-OBJTP.
DATA: BEGIN OF X_OBJECT_HD_CHANGE.
INCLUDE STRUCTURE SOOD1.
DATA: END OF X_OBJECT_HD_CHANGE.
DATA: BEGIN OF X_OBJCONT OCCURS 10.
INCLUDE STRUCTURE SOLI.
DATA: END OF X_OBJCONT.
DATA: BEGIN OF X_OBJHEAD OCCURS 0.
INCLUDE STRUCTURE SOLI.
DATA: END OF X_OBJHEAD.
DATA: BEGIN OF RAW_HEAD.
INCLUDE STRUCTURE SORH.
DATA: END OF RAW_HEAD.
DATA: BEGIN OF X_RECEIVERS OCCURS 0.
INCLUDE STRUCTURE SOOS1.
DATA: END OF X_RECEIVERS.
PARAMETERS: RECEIVER LIKE X_RECEIVERS-RECNAM. " Name
*BUILD MESSAGE HEADER
MOVE 'Sort field goes here' TO X_OBJECT_HD_CHANGE-OBJSRT. " Sort field
MOVE 'Name of the object goes here' TO X_OBJECT_HD_CHANGE-OBJNAM. " Name
MOVE 'Document title goes here' TO X_OBJECT_HD_CHANGE-OBJDES. " Title
MOVE 'F' TO X_OBJECT_HD_CHANGE-OBJSNS. " Functional OBJECT
MOVE 'E' TO X_OBJECT_HD_CHANGE-OBJLA. " Language
Object type of the new document
MOVE 'RAW' TO X_OBJECT_TYPE.
CLEAR X_OBJCONT.
MOVE 'Contents of mail' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
CLEAR X_OBJCONT-LINE. APPEND X_OBJCONT.
MOVE 'More contents' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
MOVE 'Still more contents'
to x_objcont-line.
APPEND X_OBJCONT.
MOVE ' ' TO X_OBJCONT-LINE.
APPEND X_OBJCONT.
Specific header (Dependent on the object type, here RAW)
REFRESH X_OBJHEAD.
DESCRIBE TABLE X_OBJCONT LINES RAW_HEAD-RAWSIZ.
MOVE RAW_HEAD TO X_OBJHEAD.
APPEND X_OBJHEAD.
*RECEIVERS table
CLEAR X_RECEIVERS.
REFRESH X_RECEIVERS.
MOVE RECEIVER TO X_RECEIVERS-RECNAM. " Name
MOVE 'B' TO X_RECEIVERS-RECESC. " Receiver type
MOVE 'X' TO X_RECEIVERS-SNDCP. " Send as a copy
MOVE 'X' TO X_RECEIVERS-SNDEX. " EXPRESS DOCUMENT
APPEND X_RECEIVERS.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
folder_id = 'OUTBOX'
forwarder = x_forwarder
object_fl_change = x_object_fl_change
OBJECT_HD_CHANGE = X_OBJECT_HD_CHANGE
object_id = x_object_id
OBJECT_TYPE = X_OBJECT_TYPE
OUTBOX_FLAG = 'X'
OWNER = SY-UNAME
store_flag = x_store_flag
importing
object_id_new = x_object_id_new
sent_to_all = x_sent_to_all "May need to use
TABLES
OBJCONT = X_OBJCONT
OBJHEAD = X_OBJHEAD
objpara = x_objpara
objparb = x_objparb
RECEIVERS = X_RECEIVERS.
Firstly SAP Mail
A SAP mail is a mail internal to the SAP system. It is a very good forum to exchange information with other users. Using a SAP mail in ABAP code facilitates exchange of automatic messages at various stages of the business process. It is easy to use and saves many hassles involved in using workflows for exchanging messages.
The ABAP code to send a sap mail is built around the FM SO_OBJECT_SEND which has the following pattern.
call function 'SO_OBJECT_SEND'
exporting
EXTERN_ADDRESS = ' '
FOLDER_ID = ' '
FORWARDER = ' '
OBJECT_FL_CHANGE = ' '
OBJECT_HD_CHANGE = ' '
OBJECT_ID = ' '
OBJECT_TYPE = ' '
OUTBOX_FLAG = ' '
OWNER = ' '
STORE_FLAG = ' '
DELETE_FLAG = ' '
SENDER = ' '
CHECK_ALREADY_SENT = ' '
importing
object_id_new =
sent_to_all =
tables
OBJCONT =
OBJHEAD =
OBJPARA =
OBJPARB =
receivers =
PACKING_LIST =
ATT_CONT =
ATT_HEAD =
NOTE_TEXT =
exceptions
active_user_not_exist = 1
communication_failure = 2
component_not_available = 3
folder_not_exist = 4
folder_no_authorization = 5
forwarder_not_exist = 6
note_not_exist = 7
object_not_exist = 8
object_not_sent = 9
object_no_authorization = 10
object_type_not_exist = 11
operation_no_authorization = 12
owner_not_exist = 13
parameter_error = 14
substitute_not_active = 15
substitute_not_defined = 16
system_failure = 17
too_much_receivers = 18
user_not_exist = 19
x_error = 20
others = 21.
THANKS
MRUTYUN

BizTalk Server 2010 - Batching Issue

Hi - I have setup and configured a Party and under Batching configuration setup the Party Name, Filter as ReceivePortName and Message Type and setup schedule for testing for every 5 mins. When I am dropping the message receiving following errors :
xlang/s engine event log entry: Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'Microsoft.BizTalk.Edi.RoutingOrchestration.BatchRoutingService(49b4780c-52fe-7b25-8e71-23f6d6ba8962)'.
The service instance will remain suspended until administratively resumed or terminated.
If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
InstanceId: bc7e6a70-9f6c-413f-9746-18266fba7b63
Shape name:
ShapeId: 00000000-0000-0000-0000-000000000000
Exception thrown from: segment 1, progress 0
Inner exception: Exception occurred when persisting state to the database.
Exception type: PersistenceException
Source: Microsoft.XLANGs.BizTalk.Engine
Target Site: Void Commit()
The following is a stack trace that identifies the location where the exception occured
at Microsoft.BizTalk.XLANGs.BTXEngine.BTXXlangStore.Commit()
at Microsoft.BizTalk.XLANGs.BTXEngine.BTXXlangStore.ScheduleComplete(Boolean terminate)
at Microsoft.BizTalk.XLANGs.BTXEngine.BTXService.ScheduleComplete(Context ctx, Boolean finalPersisting, Boolean terminate)
at Microsoft.XLANGs.Core.Service.Persist(Boolean dehydrate, Context ctx, Boolean idleRequired, Boolean finalPersist, Boolean bypassCommit, Boolean terminate)
at Microsoft.XLANGs.Core.TransactionalContext.OnCommit()
at Microsoft.XLANGs.Core.AtomicTransaction.OnCommit()
at Microsoft.BizTalk.Edi.RoutingOrchestration.BatchRoutingService.segment1(StopConditions stopOn)
at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)
Additional error information:
A batch item failed persistence Item-ID 69062828-e34d-42c6-8c38-bd43bee7c619 OperationType MAIO_CommitBatch Status -1061151998 ErrorInfo The published message could not be routed because no subscribers were found. .
Exception type: PersistenceItemException
Additional error information:
A batch item failed persistence Item-ID bc7e6a70-9f6c-413f-9746-18266fba7b63 OperationType MAIO_InstanceComplete Status 12589892 ErrorInfo .
Exception type: PersistenceItemException
Additional error information:
Failed to publish (send) a message in the batch. This is usually because there is no one expecting to receive this message. The error was The published message could not be routed because no subscribers were found. with
status -1061151998.
Exception type: PublishMessageException
Additional error information:
Failed to publish (send) a message in the batch. This is usually because there is no one expecting to receive this message. The error was The published message could not be routed because no subscribers were found. with
status -1061151998.
Exception type: PublishMessageException
Additional error information:
Failed to publish (send) a message in the batch. This is usually because there is no one expecting to receive this message. The error was The published message could not be routed because no subscribers were found. with
status -1061151998.
Exception type: PublishMessageException
Additional error information:
Failed to publish (send) a message in the batch. This is usually because there is no one expecting to receive this message. The error was The published message could not be routed because no subscribers were found. with
status -1061151998.
Exception type: PublishMessageException
Additional error information:
Failed to publish (send) a message in the batch. This is usually because there is no one expecting to receive this message. The error was The published message could not be routed because no subscribers were found. with
status -1061151998.
Exception type: PublishMessageException
Additional error information:
Failed to publish (send) a message in the batch. This is usually because there is no one expecting to receive this message. The error was The published message could not be routed because no subscribers were found. with
status -1061151998.
Exception type: PublishMessageException
Additional error information:
Failed to publish (send) a message in the batch. This is usually because there is no one expecting to receive this message. The error was The published message could not be routed because no subscribers were found. with
status -1061151998.
Exception type: PublishMessageException
Additional error information:
Failed to publish (send) a message in the batch. This is usually because there is no one expecting to receive this message. The error was The published message could not be routed because no subscribers were found. with
status -1061151998.
Exception type: PublishMessageException
Additional error information:
Failed to publish (send) a message in the batch. This is usually because there is no one expecting to receive this message. The error was The published message could not be routed because no subscribers were found. with
status -1061151998.
Exception type: PublishMessageException
MBH

This error can occur when the RoutingOrchestration attempts to send a message to the BatchingOrchestration and the BatchingOrchestration instance is not started.
Ensure that the BatchingOrchestration instances are running before submitting documents to be batched.
Known Issues with EDI Batching
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

Sender Mail Adapter issue

Hi All,
We are getting this error in Sender Mail adapter.
"exception caught during processing mail message; java.net.ConnectException: A remote host refused an attempted connect operation"
It is a (Lotus Notes) Mail to File scenario.
Used POP3, and gave the URL as POP:// ** .
I have tried pinging the server and getting a good response.
I have also tried the OS01 ans it returned a response : Program Terminated.
I am not sure if the POP3 port is enabled.
Are there any check points we are missing ?
Please throw some light on this as we need to solve this asap ..
Yashwanth
Edited by: YashwanthSVK on Aug 2, 2011 7:18 PM

Shabarish is right.
This seem a connectivity issue. Try to ping Mail server from your PI System and check pop3 port.
This document can be helpful for you:
http://wiki.sdn.sap.com/wiki/display/XI/SMTPConfigurationinSAPXI

Microsoft Exchange is not updating local Outlook - Send and Receive issues.

Hi everyone,
Our office has just moved to using Office 365 business edition where we are sending and receiving emails via Microsoft Online Exchange.
It has been running for 3 days so far and we do love the product however we are having a major issue at the moment and that is our local outlook 2010 and 2013 folders are not constantly synching with the exchange. We are finding that it can be hours
before emails push through to our inbox and we will receive 20 emails all at once. It is also occuring when we send emails, they will sit in the Outbox and the only way it seems to get them to send or receive is to close Outlook and re-open the program.
We also find that sometimes when we are out of the office and using the 'Outlook Web App' that emails we send to clients via here and not always synching with the local Outlook its a bit of a mess really. This is not great as we are a legal office
and need to attend to emails urgently at times and must have all emails arrive locally.
Can anyone shed some light on how this matter can be fixed urgently?
Thanks
Lisa

Hi,
As far as I know, for the sync issue in the on-premise Exchange server environment, we can check if we have selected the option ”send immediately when connected”:
Outlook 2013: file>options>advanced> send and receive> send immediately when connected
However, since your server is Exchange online, I recommend you ask for more professional help on our Exchange online forum:
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Thanks,
Angela Shi
TechNet Community Support

FTP sender channel filename issue

Hi ,
I have created a sender FTP channel with Filename Smart_*.csv.
But channel is not picking files from FTP server, even not working for *.csv.
Although when I have mentioned the complete filename in channel, its picking the file from server.
Please guide.
Thanks & Regards,
Nida

Hello,
>>Only * is also not working
Strange...I was searching SDN and found these two links describing the same issue which u are facing now...You can try to implement Mugdha's reply and see if it works?
File adapter (file name) Wild Card * not working
In addition to that, check solution 36 in 821267...
FTP & Wildcards (File adapter issue) - asterisk not working
Thanks
Amit Srivastava

Sender RFC Adapter Issue

Hi ,
I am using the following scenarion (SAP ECC)Sender RFC>PI 7.1->Receiver JDBC(ThirdParty).
The issue is whenever the the ECC system is down and is up again , the RFC sender messages are getting struck in SM58(tRFC queue).What I manually do is , go the RFC Sender communication channel in PI and reactivate it again, by making a small change in the description of the communication channel.
So, my question is , whether there is a automatical ways to handel this issue.
Any other suggestions would be highly appreciated.
Thanks,
Venu

There is no standard way to perform this automatically. I think restart of ECC is not a frequent practice in any business, therefore ideally you should add this as one of the post processing procedures after ECC restart.
Technically, there is possibility of creating a scenario which can run through a job on ECC running once after each restart. This can call webservice in PI to fetch communication channel information and reactivate it. Not a solution I would recommend.
Regards,
Prateek

SAP PI 7.31 / Sender SOAP Channel Issue with XML tag Main/@versionMajor has incorrect value 000; expected value is 003

Hi PI Experts,
We are on SAP PI 7.31 SP 10.
We are in the process of integrating ARIBA P2P solution using SOAP Adapter as sender to connect Ariba with our PI system.
We have configured all required components in ESR and ID(Most of them are content provided by Ariba).When we try to post a message into PI using SOAP UI we are ending with below error.

http://<host name> : <port name> /XISOAPAdapter/MessageServlet?channel= <party name> : <service name> : <channel name>
For the above issue we had configured SOAP Sender channel as above,and the URL we are using to hit PI is as above screenshot.
We have followed the note on this topic with out any luck.
1378872
We are not sure where is problem.As the issue is not reaching to PI not able to see the messages in SXMB_MONI.
and in the SXMB_ADM PI has been configured as Integration Server.
I had even tried to change the message protocol as XI3.0 in SOAP sender channel and noluck.
I have tried to ximessage=true query also in URL and noticed that not working.This is clear that the message we are trying to send from Ariba is not compatible with XI3.0 protocol,Ariba is not having any option to change at their end as it is a cloud application and many customers have been using same with out any issues.
We have tried maintain the Java System properties in NWA as XPI.Adapter.Version.Major = 3 but no luck.
Can some one provide us the solution to get rid of this issue?

Sender SOAP Adapter issue with webservices for authorization.

Hi All
Issue:
As we are developing a Web Service to fetch account balance from SAP(upon receiving the account no from client) and have given the wsdl file to J2EE application to call or make use of the service. But as a part of that service they expect userid/password to be entered manually from client pop-up. At this point of time, we don't want to enter userid/password manually but we want this to be hardcoded/embedded in Webservice so that there is no need of manual intervention upon calling this service.
Actual Requirement:
From Webservices to R/3-ECC6.0-IS-Banking-RFC (Synchronous Interface)
Sender: SOAP Adapter synchronous
Receiver: RFC Adapter synchronous
Note: Requesting a account number and getting response from RFC is account Balance and Date to webservice
Regards
Kiran kumar.s

Hi praveen,
Thanks for ur reply.What you said is exactly right but for time being i have to make the client not get the authorization(password--Username and password(pop-up)) when he invokes the WSDL into webservice for that u told that to write some hardcode in J2EE application,but i don't know that where to write and what to write.so, if possible can u give me the code and procedure.
This is the URL:
http://hcl3sap:50000/XISOAPAdapter/MessageServlet?channel=:BS_WEBSERVICE:CC_SOAPSENDER
Regards,
kiran kumar.

Sender file channel issue

Hello All,
Here I have a problem with sender file communication channel. THe channel is not able to pick a file as the file format is not correct andf throwing exception in the channel which is expected. But Its not allowing to go and pick the other files with correct format till I remove the bad file from the Source dir location.
How to get out of this issue Pls help me
Regards,
Moorthy

Hi,
Maybe you can delete or archive the erroneus file and then all the other files are processed?
Set checkbox Archive Faulty Source Files and give directory where the erroneus files are moved.
Also under module tab add new row int the Processing Sequence table like this:
AF_Modules/MessageTransformBean ............. 1
And in under Module Configuration:
Module Key ........ Parameter Name ...........................Parameter value
1 ......................... Transform.PermanentErrors .........true
If this won't help, please check the No[Note 1265534 - Archive faulty files does not work with add time stamp mode|https://service.sap.com/sap/support/notes/1265534]. Basically this means that archiving does not work if you have set the 'Add timestamp' option so check that too.
More about the Me[MessageTransformBean Fauty Source files |http://help.sap.com/saphelp_nw70/helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm]
Please remember that empty files are handled with their own settings.
Regards,
Mika

Sender Comm channel issue

Hi to All.
I am facing a issue sender comm channel?
comm channel is picking the file before placing the file in the source dir, the file size is some times coming morethan 6MB.
Could you please help me on this?
Thanks in advance.

Hi Yadav,
sapnote_0000821267 (as suggested by Kris)
3. File Locking / Incomplete Processing
Q: I sometimes observe that files are processed only partially, i.e., only a fragment from the file's start is converted into an XI message. Nevertheless, the file is usually archived completely. Does the File Sender Adapter honor if another process has locked a file for exclusive use?
A: Unfortunately, the J2EE 1.3 technology the File Adapter is built upon does not support file locking. This limitation affects the File Adapter's operation. Depending on whether the JRE implementation for the operating system under which the adapter runs uses mandatory file locking or advisory file locking, opening a file that is currently being written to by another process will fail or not.
If opening the file fails, no problem exists and the adapter will try to open the file each poll interval until it succeeds.
However, if opening the file is not prevented by the operating system, the adapter starts to process the file although it is still being modified. Since XI 3.0 SP11 / PI 7.0 there is a parameter named "Msecs to Wait Before Modification Check" in the advanced settings of the File Sender channel configuration to work around this issue. This setting causes the File Adapter to wait a certain time after reading, but before sending a file to the Adapter Engine. If the file has been modified (which is basically determined by comparing the size of the read data with the currentfile size of the input file) after the configured interval has elapsed, the adapter aborts the processing of the file and tries to process the file again after the retry interval has elapsed.
If this option is not available for the settings you would like to use, the following algorithm (to be implemented in your application) may be used to ensure that the File Adapter only processes completely written files:
- Create the file using an extension, which does not get processed by the File Adapter, e.g., ".tmp"
- Write the file content
- Rename the file to its final name, so the File Adapter will notice its existence and pick it up
Regards,
Raghu_Vamsee

Sender WF-BATCH issue

Similar Messages

Maybe you are looking for