Sending a zproject idoc pls help

Dear friends,
I have gone ahead and extended my project01 idoc to zproject01 to accomdate custom zfields . I would like to know which BAPI or User Exit can be used to populate these zfields in the zproject01 .
Point will be awarded generously .
Please do let me know .
Thank you

Is zproject01 an idoc type or anything else? If it is an idoc type, you have to add custom zfields in the custom segments.
For that, you have to create custom zsegments. Once this is done, go to function module based on your order type which is in the format 'IDOC_INPUT_<Mess Type>' for Inbound and 'IDOC_OUTPUT_<Mess Type>' for Outbound. In this FM, there are some customer function exists. You need to populate these zfields in this customer exit for segments.
If your requirement is not this, clear me.
Thanks,
Vinod

Similar Messages

I have an Iphone 3gs and I want to cancel the sound that makes when I send a text! I don't want to put the phone all in silent! just to turn off this awful sound everytime I send a text! pls help!

I have an Iphone 3gs and I want to cancel the sound that makes when I send a text! I don't want to put the phone all in silent! just to turn off this awful sound everytime I send a text! pls help!

Yes, I have the option "NONE" on my phone but what happens is that I have the incoming text without any sound (selected in "none") but when I send a text, still happens! that annoying sound!

Sending Project as an idoc pls help!!

Hi ,
I am working on Project Systems Module . Can anyone please tell me how to send a project from one R/3 SAP system to another ? Is there any standard program to send an project as an idoc ?? What is the procedure to send the project to antoher system.
Thank you

Hi Alisha,
Instead of using idoc use BAPI_PROJECT_MAINTAIN.
However if u really wanna use Idoc then there is a message type called <b>project </b>however in the distribution model you will have to add bapi, object type and method.
This message type only helps you to transfer project data
like project definition and wbs elements ,in order to transfer the entire master data you will have to either create a custom Idoc or enhance the existing one.
Hope this helps you.
Thanks & Regards,
Vanita

JDBC Sender Channel problem. Pls help

Hi,
In JDBC Sender Channel in Connectiion String I am giving value
jdbc:oracle:thin:@cscappnoi022.asiapac.globalcsc.net:1527:IS1
where cscappnoi022.asiapac.globalcsc.net---is where Oracle server is installed
1527 --- is my Port
IS1 is my system SID --- Pls let me what value should come here and how to find.
I am getting error
"Error during database connection to the database URL 'jdbc:oracle:thin:@cscappnoi022.asiapac.globalcsc.net:1527:IS1' using the JDBC driver 'oracle.jdbc.driver.OracleDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@cscappnoi022.asiapac.globalcsc.net:1527:IS1': SQLException: Io exception: The Network Adapter could not establish the connection'"
Regards

hi,
Your connection should be :
jdbc:oracle:thin:hutting/[email protected]:1521:pnt
jdbc driver should be:
oracle.jdbc.driver.OracleDriver
Regards
joel.
I only hope that your other jdbc scenarios are working fine , this is just to rule out the possibility of driver related errors.

TS2755 Me and my wife r sharing the same Apple ID, with the conversion IOS7 all of a sudden my wife can read all my sended and received iMessages! What t.f is going on? I tried all kind of things, pls help

Gentlemen,
Me and my wife r sharing the same Apple ID, with the conversion to IOS7 all of the sended and received iMessages on my phone comes in also on my wife's phone! Tried all kind of things, pls help
Marco

Are you both using the same Apple ID?
What do you have here:
Settings > Phone > My Number > ?

Pls send material for idocs in ECC 6.0

Pls send material for idocs in ECC6.0

Hi sitaram s ,
IDoc
- IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system. IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
A large enterprise's networked computing environment is likely to connect many geographically distributed computers to the main database. These computers are likely to use different hardware and/or operating system platforms. An IDoc encapsulates data so that it can be exchanged between different systems without conversion from one format to another.
IDoc types define different categories of data, such as purchase orders or invoices, which may then be broken down into more specific categories called message types. Greater specificity means that an IDoc type is capable of storing only the data required for a particular transaction, which increases efficiency and decreases resource demands.
An IDoc can be generated at any point in a transaction process. For example, during a shipping transaction process, an IDoc may be generated that includes the data fields required to print a shipping manifest. After a user performs an SAP transaction, one or more IDocs are generated in the sending database and passed to the ALE communication layer. The communication layer performs a Remote Function Call (RFC), using the port definition and RFC destination specified by the customer model. The IDoc is transmitted to the receiver, which may be an R/3, R/2, or some external system.
Archiving Processed IDocs
IDoc archiving is a two-step process:
1. Archive the IDoc.
2. After that another job will be generated. You can see in your SARA for your trigger to delete those archived IDocs.
Have a look at transaction WE47, set "Archiving - Possible" for all statuses to be archived. Use transaction SARA with object IDoc to archive. If the above is set then all IDocs are archived the same way.
Transaction SARA works in the following way:
On the main screen enter IDoc as the object. Click on Customising -> Technical settings. This shows the logical filename (configured via transaction FILE & SF01) that will be used to get a filename when writing the archive files. It also shows the document type (that links to an archive via transaction 0AC0) or the archive, depending on SAP version. You can also set the size of the archive files and whether the deletion and storage jobs should execute automatically or not.
On the main screen there are, amongst others, buttons for ARCHIVE, DELETE and MANAGEMENT. When you click on ARCHIVE you will go to a screen where you can create variants, and set the parameters for the archiving job. The EXECUTE button will schedule this job. If the "start automatic" tic for the deletion program was not set in customising, you will need to go to the DELETE button on the main screen to schedule the deletion jobs, after the archive job has finished. This schedules a job per archive file. In MANAGEMENT you will be able to see the statuses of each archive run.
SAP Integration Using ALE(Application Linking and Enabling)
- IDOCS -
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
Updating IDoc data in segments,Changing a control record of an IDoc,Getting IDocs linked to Application documents,
Displaying and IDoc in a report,Read IDoc from Database,Creating and sending an IDoc,Update IDoc status on the database
ALE Inbound Pre-Processing
http://www.erpgenie.com/sapedi/idoc_abap.htm
cheers!
gyanaraj
reward points if u find this helpful

All my send out email lost in cyberspace! Pls Help!

Hi pp,
Pls help me! I believe my Mail started to behave strangely when I update the latest security patch or OSX to 10.4.5 ... am using Mail 2.0.7 now...
Everything look and work fine for my mail server... I can download all email that people send to me, and it's seems like I can send out email to my friends too...
**** No! Mail seems to work fine when I try sending out email. No error msg, no blockage... everything looks just alright. But my friends have complained to me that they didnt received a single email from me...
1.feeling something wrong, I called up my Mail server hosting company to check my mail and they say nothing is wrong.
2. I do a roundtrip testing, by sending email from my own account to my own account. I send out about 10 over mail... nothing was received.
3. I do a disk verification using Disk Utility. No error detected.
4. Decided to download a third-party email client program to test, IT'S WORK!
I can use other email client program to send out and able to receive!
Conclusion is, if I use Mail to send out my email, it will send out but eventually disappear before reaching the recipient. Something must be wrong with my System or Mail... but I've run out of idea on how to solve it...am getting very desperate at the current situation... hopefully there are some genius or knowledgable kind soul fellow that can help me on this mystery error... hereby, thanks alot fto anyone who offer their help to me. greatly appreciated.
Powerbook G4 12" Mac OS X (10.4.5)

Nothing in any update should have caused this, and clearly has not for most people -- therefore we should seek an answer aside from waiting for some unknown update.
What type of account do you have -- POP, IMAP or .mac. In Mail Preferences, what are the selections in Mailbox Behaviors for this account?
In the Finder, open Home/Library/Mail/Mailboxes -- is there an Outbox.mbox folder, and is it represented by a blue Icon? At Home/Library/Mail/this account folder, are there both a Drafts.mbox folder, and Sent Messages.mbox folder, and are both blue icons?
More info, please.
Ernie

I want to change my password but the system is not sending me message to reset my password. pls help someone is using my password without my permission and i want to change my password.

i want to change my password but the system is not sending me message to reset my password. pls help someone is using my password without my permission and i want to change my password.

If you are talking about your Apple ID password, make sure it IS your apple ID.
In the past 24 hours, I have received two emails "How to reset your Apple ID password". I had not requested any change and I finally realized someone else is trying to reset the password. I have had this Apple ID since 2009 so I am not using someone else's ID.
Again, if you are not receiving the email to reset make sure you have the right ID - it might be going to the email linked to the account, and it might not be yours.

Forgot your answers? Send reset security info email ..... this link not see in my apple accound pls help

Forgot your answers? Send reset security info email. this link not see in my apple accound pls help i am used another id is alredy located

The send reset link will only show on your account if you already have a rescue email address (which is not the same thing as an alternate email address) set up on your account. If you haven't checked whether you have the link then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account, then click on 'Password and Security' on the left-hand side of that page and on the right-hand side of the screen (similar to the screenshot in the second post on this thread) you might see an option below the questions to send reset info to a rescue email address.
If you don't get the link (you won't be able to add a rescue email address until you can answer 2 of your questions) then you will need to contact iTunes Support or Apple to get the questions reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or you could change to 2-step verification : http://support.apple.com/kb/HT5570

On 15/12/2012 i send iphone 4s adapter to digi klang for Warranty. until today digi center still talk to me go back home and waiting.pls help Thank.

on 15/12/2012 i send iphone 4s adapter to digi klang for Warranty. until today digi center still talk to me go back home and waiting.pls help
Thank.

This is a USER to User technical Forum
There is no Apple presence on this forum
So nothing anyone here can do
As this is a public World wide Public forum I suggest you remove the document you have strangely decided to copy above .It looks like some form ID card

I cant send MMS using my iphone 5s . it keep on prompt me a msg "MMS Messaging needs to be enabled to send this message", but inside "setting/message" there's no button for me to ON the SMS/MMS. pls help. Thks

I cant send MMS using my iphone 5s . it keep on prompt me a msg "MMS Messaging needs to be enabled to send this message", but inside "setting/message" there's no button for me to ON the SMS/MMS. pls help. Thks

@Dmitriy Buldakov, have you found the solution to the issue yet? I have the same problem, no option to turn on MMS in my iPhone settings. I checked the settings on my friend's iPhone, which has the same iOS version as me (8.1.1), and the option is there. It's really annoying...

Pls help in sending multiple resposes after analysing the sequential commands from the device

Hi all
pls help me in sending sequential responses for the different commands. For example,i have to send the response1 for command1 then again host wll send the some other command ,say command 2 after receiving response 1,then again i have to respond to the corresponding command.i m using the pci-6221 card not tradition DAQcard.
regards,
nitin

Hello nitin,
It sounds like you are looking for some examples on how to program your
6221 DAQ board. I highly reccomend taking a look at the LabVIEW
shipping examples that install with the DAQ driver. To access
them, open the NI Example Finder by going to the menu bar of a VI and
selecting Help >> Find Examples...
If you have any specific questions, please feel free to ask!
Eric
DE For Life!

Pls help me in sending sequential responses for the different commands.

Hi all
pls help me in sending sequential responses for the different commands. For example,i have to send the response1 for command1 then again host wll send the some other command ,say command 2 after receiving response 1,then again i have to respond to the corresponding command.i m using the pci-6221 card not tradition DAQcard.
regards,
nitin

Hi,
you need to be more specific. What is your setup?
Obviously, what you need is a command parser. Look this article for the basics. I know it is meant for RT but the concept is there.
Not sure it will help with so few infos: http://zone.ni.com/devzone/conceptd.nsf/webmain/CD63FD0F746B17A686256F090065F572
Dai
Dai
LV 7.1 - WIN XP - RT - FP

My iMessage is not working!!! i can send n rcv msgs from myself but i cant send n rcv msgs from others...pls help me!

pls help me make my iMessage work...cant send and rcv msgs from others but can send n rcv msgs from myself...

are the people you are sending messages to people that have ios 5 and imessage set up? imessages only work between ios users
hope this helps,
brian

Send mail OK but get mail no OK.Pls help me!!!!!!!!!!!!!!!!

hi,all
Mailbox of my user can only send message but can't recieve message. My server is installed by Netscape Messaging Server 4.2.
-I used the command reconstruct this mail box but no OK.
-After I delete user on DS by console
-and then mboxutil -d user/muoitv/INBOX
-And the last I create a new user which have the same userid . but the result is bad, it 's the same (no OK to get mail)
-Especialy is if I create the difference userid . This Mail box is OK and if I create the same userid =muoitv .It ' s not OK.
Why?
The error when you send mail to this account :
This Message was undeliverable due to the following reason:
The following destination addresses were unknown (please check
the addresses and re-mail the message):
SMTP <[email protected]>
Please reply to <[email protected]>
if you feel this message to be in error.
- when I check the DS .I see this user.
Pls help me,it very important to me.I haven't found the solution yet now.
Wait for your replies

Log smtp
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: 20031217080554:SMTP-Router:ProcessAddresses():Multiple LDAP Entries:
User-From: <[email protected]>
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Notice: Error-Handler:HQ0LPU01.003:<>:1949:<[email protected]>
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Error-Handler:Logging Error:HQ0LPU01.003:Error-Handler:BadReturn
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Message-Id: HQ0LPU01.003
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Parent: 0
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Header-Size: 401
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Body-Size: 1546
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Header-Flush: 0
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Function: Error-Handler
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Control-Type: Mail
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Priority: 1
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Error-Msg-Type: ReturnMessage
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Host-From: mess-hcm.vnn.vn [127.0.0.1]
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Submitted-Date: Wed, 17 Dec 2003 08:05:54 +0700
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Submitted-Via: Error-Handler SMTP <[email protected]>
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: User-From: SMTP<>
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: MIME-Encoding:
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: MTA-Hops: 0
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Trace: Error-Handler
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Trace: Account-Handler
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Trace: SMTP-Router
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Trace: Error-Handler
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Channel-To: SMTP <[email protected]>
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: RCPT-Exts:
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Diagnostic-Code: 551 User unknown
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Error: SMTP-Router:UnknownAccounts (WriteUnknownAcct)
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Error-Text: SMTP <[email protected]>
[17/Dec/200:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Error-Token: mtalocal:DBT_SMTPRtrUnknownAccounts_
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Action: failed
[17/Dec/2003:08:05:54 +0700] mess-hcm smtpd[16043]: General Error: Info: NOTICE: BadReturn. Unable to deliver or return to sender.

Sending a zproject idoc pls help

Similar Messages

Maybe you are looking for