Sending Acknowledgements in File to IDoc scenario

Hi,
I have configured File to IDoc scenario successfully. I would like to send acknowledgements whenever any error occurs. But, unfortunately I could not able to find IDX_NOALE report which is required for acknowledgement configuration. To my knowledge, this report is necessary.
Can anybody suggest workaround for this?
Regards,
Suraj Kumar

Hi Suraj,
Try these threads..
http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
Hope these help you out!
cheers,
Prashanth

Similar Messages

Receive acknowledgement in file-to-idoc scenario

Hello!
I'm using guide "How to handle acknowledgement for IDOC", and for the first time I want to see an acknowledgement status in sxmb_moni.
I have passed all steps:
In CRM I have logical system P1DFILE, this is the system that sends an idoc to CRM.
Also, I have logical system C2DCLNT100 - this is CRM system.
First, I go to BD64, create new model view XI_CRM. Then, add message type:
Sender system - C2DCLNT100
Receiver system - P1DFILE
Message type - ALEAUD.
Then I create RFC destination P1D_001 to my PI server.
Then I create port SAPP1D using WE21
Then I go to WE20, choose my Logical System - P1DFILE. I already have the inbound message types (CRMXIF_PARTNER_SAVE and CRMXIF_PARTNER_SAVE_M). I add new outbound message - ALEAUD with receiver port SAPP1D.
Then I go to RBDSTATE, create variant SAP_AUDIT_SEND and enter:
Confirmation to system: P1DFILE
Message type: CRMXIF_PARTNER_SAVE and CRMXIF_PARTNER_SAVE_M
Then, in SM36 I shedule SAP_AUDIT_SEND as a hourly job (does this mean, that I will receive confirmations only every hour?)
So, what should I do to see ack in sxmb_moni?

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

System Level Acknowledgement in File to IDOC Scenario

Hi All,
I have the File-> IDOC Scenario. Once the IDOC is successfully sent to R/3, PI should send a acknowlement file back to the sender system.
Could someone suggest how to design this scenario?
Should I use IDOC Acknowledgement. As it is a existing scenario, I dont want much change in r/3 side.

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

Problem with Sender service in File to IDOC scenario

Hello All,
Am doing a file to IDOC scenario.
I have configured the sending system as a party and added a business component, to the BC attached the service interface and also configured the sender Communication channel(CC) as file.
On the receiving end configured the R/3 system from SLD as the business system and configured the receiver CCl. Can see the R/3 logical system in the Adapter specific identifiers at business system.
Pushing the file get an error "Unable to convert the sender service to an ALE Logical System". But choosing "Take sender from Payload" in the receiver CC is resolving the problem, however the sender partner number remains the same as what I have mapped to the control record in message mapping (which is like hard coding).
My questions are:
1. Am I doing the correct config in terms of the scenario. (like using "Take sender from Payload")
2. I tried using identifiers at the party level to convert the sending system, but nothing seems to work. But sending system remains the same as the constant from mapping.
Suggestions would be very much helpful..
--Prashanth
PS: Have gone through many blogs and posts on the forums, but may be I did not see the correct thread. Apologies if I am asking this again.

Hi Prashanth,
refer the below discussion i think it will solve your problem.
File To Idoc scenario
Thanks

How to get Idoc acknowledgment in File to Idoc scenario

Hi All,
Please give suggestions about the below mentioned scenario:
Scenario: FileXI- ECC - Data from File is converted to various IDocs and posted in SAP. (No BPM used)
Problem: Exception Handling > > We want a message back from SAP system telling us that out of 100 IDocs that were sent, n were posted successfully and rest failed along with the error description. How can this be achieved?
Regards,
XIer

Pls go thruough these links also
Please see the below links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
unable to import from SLD
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
<b>IDOC Acknowledgements</b>
R/3 IDOC ->XI-> ORACLE Error Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
Regards
Abhishek Agrahari

Sender Port in FILE to IDOC scenario

Hi all,
I am trying to do a File - SAP XI-IDOC scenario.
The idoc which is getting created in XI is having senderport as SAPABC where ABC is my XI system id.
i have not craeted this sender port and i am not able to find it in idx1 tx.code of XI.
Can anyone please tell me how and where is this port is getting created. Will it get genarated automatically by the XI system for posting the idocs?
thanks in adavance
Jagruthi

Hi Jagruti,
Please refer to these blogs and threads:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
Hope these blogs help you.
Regards,
Sarvesh Desai

Acknowledgement in file to idoc scenario

Anyone, please, explain me step-by-step, how can I receive an acknowledgement to XI ?
I have a file with business partner from MDM, XI takes it and send an idoc to CRM. I need to receive any ack to XI and put it to folder as a file for MDM. I've already checked a blog "How to handle acknowledgement for IDOC", but I don't understand how to make it in my case.
Please, help me step-by-step!

Hey Andrey,
/people/mitesh.parekh/blog/2008/12/01/receiving-aleaud-as-acknowledgment-in-ccbpm
i hope this will give insight for you..
Rajesh

Reg File to IDOC scenario with Acknowledgment

Hi Experts!
In a File to IDOC scenario , how to get the acknowledgment back to PI after posting the IDOC to SAP system and send the acknowledgment to the sender system.
What setting needs to be done in Sap and PI? Is it better if we have a BPM or is it good to have another interface to pass the acknowledgment IDOC back to the file sender.
Regards,
Srini

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

Can anyone plz send FILE to IDOC scenario

Hi everyone,
           can anyone send me this scenario:
     " Develop interface to integrate a legacy system to an SAP R/3 system by using file and IDOC adapter".
thank u in advance
       xilearner

hai
Actually File to IDOC scenario is very simple.
1.Go to Integration repository,Create a Software Component Version.
2.Under that SWCV Create a Data structure for Source(File).
3.Create a Message Type, Message interface,Message mapping,Interface mapping for the file.
4.Get the IDOC structure from SAP objects Using import objects.
5.Using a sample file u can test it in the message mapping.
6.Activate all these things then and there.
Go to Configuration
1.Create Sender Communication Channel,Sender Agreement,Receiver Determination,Interface Determination and Receiver Agreement.
2.Use File Adapter for File and IDOC adapter for Receiver in the communication channel u specified.
3.Activate all these things then and there.
4.Just create a sample file Using mapping in design and u can see a output file.
Just look at this link:
file to idoc scenario
Regards,
Gunasree

Fault message type using in File to IDoc Scenario

Hi,
I have successfully configured File to IDoc scenario. Now I am thinking to add some flavour to it by using Fault message type.
Can I use fault message type without using any proxies?
Can some body help in giving an answer to my question and provide some weblogs to achieve the configuration?
Thanks in advance.
Suraj Kumar

Hi Suraj,
With IDOCs, you cannot set up fault messages as it is async mode communication. There is not control which waits for the processing of the message/application errors as you have it in case of synch mode.
But, you can set up acknowledgement using ALEAUD. Check this for more /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
praveen

XI 3 File to IDoc scenario - Still referencing Old Logical system

Hi
Dont know if you can help. I have a file to idoc scenario using XI 3 to R/3 4.6c system.
I had the interface working from a third party system XMLHUB to SAP R/3. The Logical system name for the XMLHUB was XMLHUB01 in the SLD which I have set up as a partner profile in R/3. I have recently changed the logical system name to XMLHUBDEV01 in the SLD and created that logical system in R/3 and changed the partner profile to XMLHUBDEV01.
Unfortunately in the sender information of the IDoc the partner number is still XMLHUB01 and not XMLHUBDEV01. I don't understand where this partner is sent from to get into the control record of the IDoc.
I have cleared the SLD cache in both the Repository and the directory. Is there somewhere else I should be looking? Any help would be appreciated.
Regards
Daniel

hi daniel...
this thread wud answer ur query....
Re: IDOC Payload
regards..
vishal

Error in File to IDOC Scenario

Hi,
I have File to IDOC scenario.
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Despite of this error in sender channel I am receiving the message in XI.
But in XI also it throws error :
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
Any help on this ?
Thanks,
Vikas

Hello Vikas,
I am getting error in sender file channel.
"Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
Check your flat file structure whether the key field you have chosen is appropriate and also recheck the FCC details whether you have assigned the value for the key field i.e. keyFieldValue.
"Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
regarding the above error refer this
https://wiki.sdn.sap.com/wiki/display/XI/Unable%20to%20convert%20Sender%20system%20to%20ALE%20logical%20system
Regards,
Prasanna

How to handle the control records in case of file to idoc scenario.

Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.

Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri

About FILE to IDOC scenario

Hi Experts,
i need some help for doing file to idoc scenario.
1. what are the configurations we must do while doing this scenario?
2. How to communicate with Legacy system to sap system?
3. How to create the business and logical systems for SAP systems in SLD?
4. How to define parameters in communcation in ID?
5. what work shold be done using SM59 and WE20? and specify the steps please?
6. finally if u having word file please send from the creation of logical system for sap system?
thanx.

Go thru below mentioned links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
once you go thru them you will find answers for questions.
thanks,
Venkat

File to IDOC scenario-no messages in SXMB_MONI

Hi all,
   I know this is asked so many times ,I checked some links but couldn;t find out the gap where it happened.
I am doing a File to IDOC scenario through XI mapping.
I am not getting any messages in SXMB_MONI.
When I check Communication Channel monitering in Runtime Workbench, it shows processing successfully, then it should generate messages in SXMB_MONI and intimate whether the scenario created is correct or not right!
Please help.
My scenario goes like this:
Sender : Business service(Some file location)
Used File adapter for sender communication channnel.
Receiver : Business system(SAP R/3)
Used IDOC Adapter for receiver communication channel.
One more thing is,do I need to create logical system for Business service also?If so, where do I maintain it?(In SAP R/3 or in XI system?)
Till now,I maintained my XI system as logical system in WE20 and I didn't create any logical system for business service in any system.Does it create main problem?

Hi , I am able to poll the files from file location now.and I am receiving IDOC into SAP R/3 with status 56.I already created partner for file path as a logical system and assigned inbound parameters with respective message type . Even the status shows :
An inbound partner profile could not be found with the following key:
/LSDEMO/LS//DEBMAS////
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST    test flag
I already manitained following data and there is one record in EDP21.
SNDPRN = LSDEMO
SNDPRT = LS
SNDPFC = LS
MESTYP   = DEBMAS
MESCOD = space
MESFCT = space
TEST = space
EVCODE   = DEBM
SYNCHK = X
METHOD = space
USRTYP = space
USRLNG = space
INMOD = space
DCART = space
And please let me know whether I have to maintain outbound parameters also for my partner in XI system.I didn't see any difference even I maintained it.
And my IDOC takes another port rather than I mentioned in my SNDPRN(sender port) of my IDOC control record in message mapping.Let me know whether it's mandatory to maintain port name with SAP<XXX>convension,because IDOC in R/3 is picking the port with that naming convension.
Edited by: Jaya on Feb 26, 2010 10:17 AM
Edited by: Jaya on Feb 26, 2010 10:27 AM

Sending Acknowledgements in File to IDoc scenario

Similar Messages

Maybe you are looking for