Sending all devices on router to cloud

Trying to connect 2 airport express units to my current wireless router.  Only want to use the devices to play music.  This is a PC based network.  Only Apple devices are ipads.
Once I connect to router, it directs all traffic to our cloud and no one can access the internet. 
How do I set it up to eliminate this problem.

I think I have set it to bridge mode over the internet....does it have to be hardwired (via ethernet cable) to my router or can I access router wirelessly?   Also, am having trouble getting the extender to connect

Similar Messages

  • Needing to cloud all devices to the same cloud

    Hopefully I can explain this without confusing anyone. We now have 2 iPads, 2 iPhones, and 2 iPods. 1 iPad, and 1 iPod is clouded together 1 iPhone is its own cloud and the rest we just bought and have not clouded them yet. We are wanting all devices on the same cloud so we can all be linked together for all devices. However can we reassign each device so that they all share the same everything and still keep the apps that are on the phones and pods?  Please help! 

    Leonard1126 wrote:
    I want to delete all contents and settings on my Iphone 4 because I am selling it.
    See here...
    What to do before selling or giving away your iPhone, iPad, or iPod touch

  • I now have 5 devices that access the "cloud" via Match. I also have 3 computers that need to be authorized. Is there a way to authorize all these computers/devices in such a way to allow everything to access and sync to the cloud?

    I now have 5 devices that access the "cloud" via Match. I also have 3 computers that need to be authorized. Is there a way to authorize all these computers/devices in such a way to allow everything to access and sync to the cloud?

    I had a problem with a 5.0.3 project that would cause 5.0.4 to crash. Apple asked for a copy of the project and later told me it was because there were some empty text layers. Apple is aware of the issue and is working on a fix.
    In my case I still had 5.0.3 on another Mac and could clean up the project. If empty text layers might be the problem, do you know someone with an earlier version who could open it and remove the empty layers? I'd be willing to give it a try if you'd want to send me the project.
    Ross Hunter

  • CSCtq10477 - Callmanager 9.1 can't make outbound calls, Route List gets error 41 - All devices busy

    Hi all
    I seem to have run into bug CSCtq10477 and maybe CSCul71689 and CSCum85086, where calls can be received from an MGCP gateway, but fail outbound with Callmanager logs showing
    03095771.002 |17:34:14.103 |AppInfo  |RouteListCdrc::null0_CcSetupReq - Terminating a call after the RouteListCdrc cannot find any more device.
    03095771.003 |17:34:14.103 |AppInfo  |RouteListCdrc::terminateCall - No more Routes in RouteListName = RL_OUTBOUND.  Rejecting the call
    03095771.004 |17:34:14.103 |AppInfo  |RouteListCdrc::terminateCall - Sending CcRejInd, with the cause code (41), to RouteListControl because all devices are busy/stopped.
    03095771.005 |17:34:14.103 |AppInfo  |GenAlarm: AlarmName = RouteListExhausted, subFac = CALLMANAGERKeyParam = , severity = 4, AlarmMsg = RouteListName : RL_OUTBOUND, Reason=41, RouteGroups(RG_OUTBOUND)
    and a Route List exhausted alarm appearing in RTMT.
    Resetting the MGCP gateway in Callmanager, bouncing the serial interface, E1 controller and No MGCP/MGCP has no impact.  I could also see the circuit was not full.
    We have got round this by removing the gateway from the Route Group and pointing the Route Patterns directly at the gateway and this works.  I can see two of the bugs above are fixed in the latest 9.1.2SU3 code (9.1.2.13900-10), but I don't see CSCtq10477.  This bug document shows some 9.1 code is OK, but not this one.
    9.1(1.21020.1) - Not listed for download, is this an ES?
    9.1(2.10000.11) - Not listed for download, is this an ES?
    9.1(2.10000.28) - 9.1(2) - but not shown in the release notes for 9.1(2) either.
    Does anyone know if the Release notes just missed this out, or does the bug document need the Fixed versions to be updated?
    Thanks

    Hi,
    9.1(1.21020.1)  is an ES.
    9.1(2.10000.28) is the base version of 9.1(2) so this bug will be fixed in this version or any higher version of 9.1(2).
    Upgrading to the latest ES or 9.1(1) or 9.1(2)SU3 would take care of this bug.
    HTH
    Manish

  • IMessenger is sending all messages to every device on my account!!

    My Wife, I, and our cousin are on the same family plan and share the same iTunes account on our iPhones.  Because of this iMessenger is sending all messages sent or received with iMessenger to all 3 phones!!  Is there a way to add an additional email addresses to my iTunes account to fix the issue?
    setting up a different iTunes accounts per phone is out of the question.

    Have each member go to their device and go to settings, messages, you will see an options that says 'receive at' you will see the apple ID on the top and 'email' further down, have each person add their own email on 'add another email' apple will send them an email at that email for verification, after the email has been verified go back to each device and go to settings, messages, receive at, you should see two emails there now, click on the old email and click remove this email, now each of you will receive iMessage using your own email, hope this helps.

  • I need to download all of my photos from my iPhone 4S and my iPad 2 to my MacBook Air. I want to make sure all my photos are not lost and that they do not return to the original devices because of the cloud. Can someone please help ?

    I need to download all of my photos from my iPhone 4S and my iPad 2 to my MacBook Air because there is no more storage space available. I want to make sure all my photos are not lost and that they do not return to the original devices because of the cloud. Can someone please help ?

    Connect your devices to the computer with the USB cable (one device at a time) and import the photos via iPhoto or Image Capture.
    If you have not changed any default settings on your computer, iPhoto will automatically launch when you plug in the device. Then follow the import prompts.

  • What's the point of buying 200 gb storage if when I delete a photo from my iphone is cleared on all devices, I want the photos I take remain stored in the cloud and to make room on my iphone

    what's the point of buying 200 gb storage if when I delete a photo from my iphone is cleared on all devices, I want the photos I take remain stored in the cloud and to make room on my iphone

    Yes...I do not get it

  • I Wanna See All Devices That Are Connected To My Router

    I have a E1200 router and it's pretty good however I've noticed that there are 12 devices connected to my router when infact there should only be 4 devices connected. I would like to see all the devices that are connected and disconnect the ones that don't belong HELP! 
    Solved!
    Go to Solution.

    Are you using a software to see all devices that are supposed to be connected to your router? You can reset and start over with your router.  Make sure you have a security enabled on it like WPA Personal. You can try DHCP Reservation as well to ensure that the devices that will have access to your router are only the ones you included on the list.

  • Comcast just replaced my cable modem/wireless router.  All devices connect properly except my iPhone 4.  It shows itself to be connected to the network, but it does not load any web page.  Resetting the iPhone does not solve the problem.  Any suggestions?

    Comcast just replaced my cable modem/wireless router.  All devices connect properly except my iPhone 4.  It shows itself to be connected to the network, but it does not load any web page.  Resetting the iPhone does not solve the problem.  Any suggestions?

    Thank you for your response.
    I had rebooted the router (several times, actually), to no avail.
    I do not know the answer to whether MAC filtering is enabled on the router.  Have tried to find info about that, but unsuccessfully.  Router is an Arris TG852G, supplied by Comcast.  I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist.  To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages.  He was unable to connect my iPhone, however, after trying for some time.
    I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g".  The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
    By the way, my iPhone does connect wirelessly to my network at home.  This difficulty is at a second home.
    Any other thoughts would be appreciated.

  • How do i erase a corrupt contact list from iCloud,iPhone, iPad and MacBook Pro and restore Address Book backup to all devices and cloud?

    how do i erase a corrupt contact list from iCloud,iPhone, iPad and MacBook Pro and restore Address Book backup to all devices and cloud?
    I saved a corrected, most up to date version of my master Address Book Contacts as a back-up on my Mac Book Pro.
    then in an effort to "simplify my life"  i attempted to sync my I phone contacts - ( pre clean-up version) with my clean list on Mac Book Pro, New I pad and newly available icloud. DUH!! Using iTunes to do the sync caused the clean MacBOOK Pro list to be commingled with the dirty iphone contacts. amd now the whole mess is in the cloud. 
    I need to clear out the contaminated lists from all iplaces, and startover with Back-up on my macbook pro. BUT HOW???
    Help
    Karen

    I had exported an address book backup: abbu
    so since i wrote, i have found my way into the cloud: selected all entries - deleted them all from the cloud.
    This wiped out contacts on my iphone and i pad, and MBP, as well as on the cloud.  I then imported the abbu back into my now empty address book. 
    To repopulate the crowd, i selected all in my address book and created a single card vCard for export to my desktop.  I then dragged that vcard into my empty cloud.  Now my cloud has the same clean contacts as my MBP addressbook.  The cloud then pushed the clean contacts into my empty ipad and iphone contacts. 
    I had to go back to Address Book>preferences>Accounts and Add an I cloud account - but if you accidentally create a second i cloud account - all of a sudden your address book will duplicate itself.  I quickly reversed it by deleting one of the icloud accounts in my Address Book>preferences>Accounts. 
    I created a new entry on my MBP and it is now on all devices and in cloud
    I also created a new entry on my iPhone and it is now in the address book on my MBP.
    I feel empowered!!
    Have i missed anything??

  • How can I download ALL my music from the cloud to an external device?

    This seems simple enough, yet I've had nothing but problems downloading all my music in the Cloud to my Mac OR to an external device (preferred).
    How, exactly, is this accomplished?  Many thanks for any direction.
    Art Carlson

    Download all purchased music from iCloud.

  • Creative Cloud Loading on all devices

    How do i load all my documents on the Cloud so i can access both on the internet & mobile App?

    Creative Cloud Help | Browse, sync, and manage assets

  • HT4623 Hi all. I need send my iphone 4s to get a fix hardware issue. But, im in other country. what address must be send my device?

    i was opened a case to send my iphone for a hardware problem (error -1)
    But, i dont find the adress to send my device.
    What adress must be send my iphone? im in other country outside EEUU

    MiguelOduber wrote:
    im venezuela. iphone United States
    You canot send directly to  Apple from outside of the U.S.

  • EA6900 (Router AC1900) - Block specifics websites for all devices

    My Linksys device is EA6900 and I would like to know that how to block all devices from accessing a partcular website?
    Thank you

    To guide you in doing this, check this link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=3f929507766a432aa28c3aeca9e19833_Setting_up_parent... Hope this will help you.

  • Parental Control ALL Devices

    Hey, I'm trying to add parental controls on my router in order to block certain sites from all devices that connect to my network. I don't want these sites getting through my router at all, regardless of the device, and I don't want any new devices being added to the network to be able to access those sites either. Let me reiterate: I want to COMPLETELY block a set of sites from my home. 
    I've got a Linksys E2500 at home and as far as I can tell, it only allows me to block individual devices from accessing certain sites. Does anybody know how to get the results I'm looking for with this router? If not, does anybody know of a router that Linksys manufactures that offers this capability? Thanks in advance for your help.

    For this purpose I have deployed EA3500 and EA4500 models. These have the parental controls that you want are work well on under 100mb internet connections.
    I don't recommend the update to the Cloud firmware as it is buggy and you lose exacting control over your network but the Classic firmware is available and excellent.
    There is an issue with some ADSL modems but I have a firmware fix for that.
    You would use a combination of parental control and wireless MAC Address filtering. Also if you want to know and label the device on your network DHCP IP Address reservation and label the device there.
    Pick of the Parental Controls on these models:
    Parental Control:
    Wireless MAC Address Filter:
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

Maybe you are looking for