Sending all e-mails out of the draft-folder

Is it possible so send all e-mails in the draftfolders at once? I know is possible with an AVB but do I have to use it also for outlook 2010.
thank u

Hi,
Just as our MVP mentioned, it's not possible to send all email in a folder at once. However, there are some workarounds. For example, we can disable “Send immediately when connected”. To do this, open your Outlook and go to File > Options > Advanced
> Scroll down to the "Send and receive" section. Clear the check box before "Send immediately when connected". Now, all sent items will stay in Outbox and Outlook will
only send messages during the scheduled send/receive interval (for instance, every 30 minutes).
For more information, please refer:
http://www.msoutlook.info/question/181
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support

Similar Messages

Mail remaining in the Draft-Folder after sending

When I write a mail that takes more than 10 minutes, it is automatically saved in the Draft-Folder.
Then, when it has been sent, it remains in the Draft-Folder.
If I relaunch the Mail-program, this same mail is twice present in the Draft-Folder (!!!).
This makes no sense, since the message has been sent.
Is that any new Bug with Mail and IMAP-protocol?

I have the same problem.
When I send an email
- one copy goes to the draft folder an another copy of the email goes to the sent folder.
I believe the copy in the draft folder is a ghost.
I went to my online goggle mail and saw the email was sent.

Sending email leaves duplicates in the Draft Folder

When I am sending particularly large email messages, the email gets sent, but for some reason a duplicate of the message gets left in the Drafts Folder. So now I have the same email that I had just sent in the Drafts Folder and in the Sent Folder. So then I have to manually trash the message in the Drafts Folder.
This does not seem right. In the past the message in the Drafts folder has always deleted itself as soon as the email has been sent.

The last one that exhibited this behavior contained two photos that added up to 4.6MB.
But the size factor does not seem to enter in since the messages sailed out as they normally do complete with the Zooom sound that is assigned leaving behind the complete message sitting in both the Sent and Drafts folders. This leaves me with the housecleaning task of selecting the message in the Drafts folder and clicking the trash can.
It should be noted that the last time I did this, the deleted message re-appeared the next day in my Trash as a recovered file. It is like the cat that keeps coming back...

Mail is putting my emails in the draft folder even though they have been sent. What gives?

Mail is putting my emails in the draft folder and leaving them there even after they have been sent. This is not happening all the time, but enough that it's annoying. What gives? and how do I fix it?

It happens on both my Mac Air and my iMac. Both are version 10.7.5

After hitting send a draft is still saved in the draft folder.

When responding to an email it automatically saves into the draft folder which is great! However, after hitting send, the email stays in the draft folder. I do hear the "swoosh" sound so I know the email is sent, but I have to go in and delete the emails in the draft folder occassionally. I have received emails back from people even though the message is still in drafts so I know they are being received.

Is this a Gmail account? I've seen that behavior and the solution has been to turn off the feature of saving drafts to the server (see Mail - Preferences - Accounts - Mailbox Behaviors).
Matt

How do you get mail out of the Outbox?

How do you get mail out of the Outbox? I've taken pictures and am trying to email them. The emails are stuck in Outbox.
lee.ann3

Thanks Diggie, your response was very close. I clicked on the email several times. It came up and gave me the option to Send. I clicked Send and my recipients received the email.
I did not have to delete and reinstall my email account.
Have a good day.
lee.ann3

Creation of transport rule to send all external mails through a particular server for a specific user..

HI,
In our Organisation We have a question, is there any possibility to create a transport rule for sending all external mails through a particular server by a specific user.
in our organisation we have exchange 2007 one mailbox server and two hub transport servers...and we are using symantic gate way..

Hi,
Based on my knowledge, we can use the following transport rule to make that except with one user, other users cannot send outbound external emails:
And I’m afraid that there is no Exchange feature to make one specific HUB server rout all external emails.
Because if a Send connector is configured to send messages to an external domain, any Hub Transport server in the organization will route a message for that domain to a source server for that connector to be relayed to the destination domain.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

TS3276 Lion mail; sent emails show up in the draft folder as well as the sent folder. Often the draft will appear a day after the email was actually sent

Lion mail
Emails that have been Sent show up in the Draft folder as well as th e Sent folder.
Often they may not show up in Draft folder until the next day.
Is there a correction for this?

no, I only use mac as my incoming and outgoing server.
What I did was un check the draft box in the mail preferences,
and will see if that works. Since I use only the computer for emails
the cloud isnt being used to its max anyway.
Thanks taking time to share

One messege is stuck in the draft folder

I sent and email the other day and it got to where it needed to go to. The problem is that there is a copy of it stuck in the draft folder. Mail has never done this before, it only did this to this particular messege. I have sent other messeges since with no problem. If I trash the prefs for Mail, what will I have to reset if anything? Will this solve it?
thanks
Chris

Strange if these messages are re-appearing after deleting the Drafts mailbox for the associated account.
While composing a message, the message is temporarily saved in account's Drafts mailbox for the selected account to be used for sending the message.
If you have multiple accounts in Mail and you deleted the Drafts.mbox folder within the appropriate account named folder, the re-appearing messages must be coming from the account's Sent mailbox.
How many messages are available in this account's Sent mailbox and how often do you use the Rebuild Mailbox function on the Inbox and Sent mailbox for all accounts?

Several messages were in the Drafts folder when my isp went off line suddenly and when it came back hours later the draft messages were gone. How do I find them

I had 8 or 10 messages in the drafts folder. I had Thunderbird open when my isp had equipment problems and suddenly went off line on February 19, 2015. When it came back online the next morning all those drafts were gone. Is there some way I can retrieve them? If so, please send directions on how to do it. Thank you for any help you can give me.
Alta Flynt
[email protected]

The top folder was Local Folders with Inbox, Sent Mail, Drafts, Trash and Archives under it. I had several messages in Archives and they went away when the Drafts messages went. Actually the only folder that wasn't emptied was the inbox. Those messages re-downloaded from the web mail.
What I understand from what you've written is that unless something was done when the mail account was set up, all my mail was on att/yahoo mail and they're the ones that lost my drafts.
If I'm wrong about it being an IMAP account and it was really POP, would that make a difference?
Alta

When I am writing an email, I get an alert message that says "The message could not be copied or moved to the drafts folder. Writing to the folder failed. To ga

When I am writing an email, I get an alert message that says “The message could not be copied or moved to the drafts folder. Writing to the folder failed. To gain disc space, choose Empty Deleted and choose Compact Folders and try again.”
If I do that, I get a message saying “There was an error copying to the Sent folder,, retry?”
If I retry it sends the uncompleted email. All I can do is keep deleting the message and carry on. Then the whole business might repeat itself.
Help!
Frank

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

Mail Messages Going To Drafts Folder

Almost every mail message I compose - both new messages and replies - are showing up in the Drafts folder. These seem to be identical to messages after they are sent and appearing in the Sent folder. I'm not saving them at any time, so why would these messages go to "Drafts"?
Thanks,
JD

While indeed unchecking this option stops the behavior, it's not the best of solutions. The options to save drafts on server is available with any decent IMAP program, and generally is very beneficial. Say I start a message on my Mac, and then have to leave before it's done. If it's saved to the server, I can then pick this message up later on my iPhone or iPad and complete it and send it. Or I can start it on an iOS device, have it save to the server from there, and then pick it up on my Mac later to complete.
So, the functionality of "Save drafts on server" is widely known amongst IMAP clients, and it would be nice if Apple Mail would simply replace a previous draft of a particular message with the latest version rather than piling up multiple versions of the email. Also, it's customary that when you eventually send the message, the drafts also disappear.
It would also help if there was a way to increase the auto-save time to a longer setting so that they don't pile up so fast.
Danita

How to send data from internal table to the shared folder in ABAP

Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.

Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers

I downloaded and installed Production Premuim CS5 on my computer and when I try to open it out of the applications folder it bounces at the bottom and then disappears.

I downloaded and installed Production Premuim CS5 on my computer and when I try to open it out of the applications folder it bounces at the bottom and then disappears. Does anyone know why this is? I've tried everything to open them but they will not open. Does anyone else have this problem?

I have a mac osx version 10.9.2. I used to have the student version of creative cloud cs6 earlier this year. I cancelled my subscription several months ago and bought cs5 two weeks ago. I never had any problems with the cloud. I went through the entire download process for CS5, and they all showed up in my applications folder and appeared to have downloaded but every time I try to open them they bounce around next to the application manager icon and then disappear.

Why has itunes moved my music files out of the Music folder?

To my horror I just found out that itunes has moved folders (albums) out of the Music folder, Ive always found those folders very well organized (music, movies, podcasts, etc) now Im seeing some albums mixed with those folders (out of the music folder) and some albums IN the music folder as well, even worse I have the same folder inside Music and out!! with a few tracks on each, but in iTunes everything looks normal and it plays the album as usual, Im losing my mind over this I cant find a way to fix it, I even started moving them manually but there are too many, and for the duplicate folders I have to move the tracks that were moved. Any idea on why did this happen? I dont want to move the folders and lose hours only to find out that itunes did it again!! I thank you very very ver much in advance.

iTunes on a Mac may be more forgiving if you move things around manually, but it isn't really recommended.
Here are typical layouts for the iTunes folders:
If you have upgraded from version 8 (or earlier) to iTunes 9 (or later) at some point, then your media folder (everything inside the red outline) may still be called iTunes Music instead of iTunes Media. The extra Music folder inside the media folder is used if you had an older library and have allowed iTunes to Upgrade to iTunes Media Organization (iTunes 9) or used File > Library > Organize Library > Reorganize files in the folder "<Media Folder>" (iTunes 10/11). Depending on your choices for Keep iTunes Media folder organized and Copy files to iTunes Media folder when adding to library plus a little bug in which one build changed the name of the file storing the choice of layout it is quite easy for some of your files to be organized according to one layout and some the other. (Recent installs of iTunes on a Mac now give the library file the .itl extension)
Assuming you're happy letting iTunes organize your files the following steps should tidy things up (should it be necessary):
1. Select File > Library > Organize Library... > Tick Reorganize files in the folder "<Media Folder>" and click OK. Skip if this option is grayed out (already upgraded) or you prefer the older layout.
2. Select File > Library > Organize Library... > Tick Consolidate files and click OK. This will bring any files currently organized outside the designated media folder into it. N.B. This will create duplicate copies of any file that needs to be consolidated, and you will need to manually clean up afterwards.
3. Select iTunes > Preferences > Advanced tab, uncheck Keep iTunes Media folder organized and click OK.
4. Select iTunes > Preferences > Advanced tab, check Keep iTunes Media folder organized and click OK. This triggers iTunes into reorganizing everything according to your preferences.
5. (Optional, if applicable) Close iTunes, rename the media folder iTunes Music as iTunes Media then restart iTunes. Check under iTunes > Preferences > Advanced tab that the location has automatically updated. If you can't access the media for any reason just undo the folder rename.
PS If you really prefer the older layout, but it is already in the new one then, edit the hidden file .iTunes Preferences.plist in your media folder and change the integer from 1 to 0 before doing step 3.
You should backup your library before attempting any major reorganization.
If iTunes is still creating files or folders in the wrong locations there is a possibility of permissions problems. Offhand I'm not sure of the correct OS X terms but on Windows both the system and user accounts should have full access permissions to all files & folders within the iTunes folder in order for it to work properly.
tt2

Sending all e-mails out of the draft-folder

Similar Messages

Maybe you are looking for