Sending an Email from UDF if incoming file is empty

Hi All,
My scenario is :
File -XI- File
My requirement is if incoming file is empty then XI should send email to a recipients list with a custom message saying that "No Error Records".
Where should be the logic to send this email?
Should I create an UDF to send this email in the mapping(at the root node)?What should be the code in the UDF(to send email)?
Can anybody please help me for this scenario?
Thanks in advance!
Shweta.

Hi Shweta,
Sending mail is not possible via UDF.
But in case if the empty condition is failed then you could create the Mail communication channel and use it with conditional routing in Receiver determination.
1. Create two Business services one for receiver File and one for receiver Mail.
2. Now in Receiver dtermination..open the Conditional editor where check if the fields are empty...
3. If its empty recevier mail adapter will be called and Notification mail will be passed with required information.
4. If the values are avaialble in field then the File to File scenario will be executed.
Thanks
Swarup

Similar Messages

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying.

HT1688 How do I send an email from my Iphone to a "group" that I have established in my Yahoo account

How do I send an email from my Iphone to a "group" that I have established in my Yahoo account?

So I have bought a couple of apps on my iphone and would like to transfer them to my itunes library, but not sure how.
iTunes > File > Transfer purchases
When I plug in my iphone and try and sync the two, I get a warning from itunes that everything on my iphone will be wiped and everything from my itunes library will be moved to it.
Have you changed the computer you are syncing with?

Sending encrypted emails from the iPad is not working

I can't get sending encrypted emails working on my iPad3 running iOS 8.0.2
Let me explain what I did:
1. I created S/MIME certificates for 2 email addresses on my iMac in Keychain Access. One email address exists only on the iMac the other only on the iPad.
2. I set "When using this certificate" to "Always Trust" in both certificates.
3. I exported 1 S/MIME certificate (p12) and installed it on the iPad. Then I deleted this certificate and its private&public keys in iMac Keychain Access
4. I exchanged public certificates between the 2 devices. I installed one certificate in iMac Keychain Access and the other in iPad/Settings/General/Profiles.
5. On the iMac in the iPad certificate I set "When using this certificate" to "Always Trust"
6. I tested whether I can send and receive signed and/or encrypted emails
Results:
1. From the iMac I can send signed and/or encrypted emails to the iPad.
    On the iPad I can read the encrypted emails. The signature is not trusted
2. On the iPad I can send signed messages to the iMac. On the iMac the signature is trusted.
    I cannot send encrypted emails from the iPad to the iMac. The iPad doesn't know about the public certificate in iPad/Settings/General/Profiles
So much for the straight forward part. Now it gets a bit more complicated and confusing.
1. I deleted the iMac certificate in the iPad/Settings/General/Profiles. Then in iPad Mail I opened the signed mail coming from the iMac.
    I viewed the untrusted certificate in Mail and installed it. From this point on all signed emails from the iMac are trusted.
    Strangely the by this method installed certificate doesn't appear in iPad/Settings/General/Profiles.
    Furthermore I still cannot send encrypted messages to the iMac. This certificate installation seems to be used only to check trust worthiness of the signature.
    Installing on top the iMac public certificate in iPad/Settings/General/Profiles doesn't enable to send encrypted messages from the iPad either.
To be sure that this problem relates to the iPad certificate management and is not related to an error by me I did the following:
1. I transferred a p12 file for a certificate that I created in my iMac to a PC running Windows7.
2. I transferred a p12 file plus its public key (.pem) that I created in my iMac to another iMac into Keychain Access. (I have not tested if the pem is needed).
3. On the other iMac and the PC I made sure that the certificates are trusted.
    On the PC that means in the Certificate Manager the p12 needs to be in the "Personal" folder and in the "Trusted Root Certification Authorities" folder.
    The public keys need to be in the "Trusted People" folder and the "Other People" folder. One can just copy/paste the certificates.
4. In both cases I deleted the certificate and public/private keys on my iMac.
5. I exchanged public certificates between the devices.
6. I tested exchanging signed and/or encrypted emails between my iMac and the PC and my iMac and the other iMac.
Result:
1. I can send signed and/or encrypted emails to the other iMac and the PC
2. The PC and the other iMac trust the signature from my iMac and can read the encrypted emails
3. My iMac can read encrypted emails from the PC and the other iMac
4. My iMac trusts emails with signatures from the PC and the other iMac.
Everything is working as it should.
After the above test I wanted to see whether I can set up encrypted email exchange between the iPad and the PC. Strangely iPad Mail recognized the public certificate from the PC installed in iPad/Settings/General/Profiles and allowed me to send an encrypted email to the PC. However, on the PC I was unable to read the encrypted email. And the other way around, encrypted emails send from the PC to the iPad cannot be read on the iPad.
My conclusion from all this testing is that iPad mail encryption is still "under construction".

I was able to resolve the above described problem to some degree. Setting up sending and receiving encrypted emails between iOS and OSX I have working.
What is still not working is reading encrypted emails on the iPad/iOS8 received from Windows 7 PC. And sending encrypted emails to Windows 7 PC.
The details about how I solved part of the problem are described here.

Sending an email from Lotus Notes release 5.0.4a

I need to write java code for sending an email from Lotus Notes release 5.0.4a.
Initially, I tried using Lotus Domino Toolkit for java, but the current release, "Lotus Domino ToolKit for Java/Corba release 5.0.8" is not compatible with the notes client/server we are using(5.0.4a).
Now, I am trying to use "Lotus Domino Toolkit 2.1" which supports notes version 5.0.3 and higher, but I couldnot find out how to use it to send email.
Is there are other way in which we can connect to Lotus Notes for sending email. I cannot use SMTP as the Lotus Notes administrator is afraid of security issues so there is no possibility that I can connect to Domino server using java mail API by enabling SMTP on the Domino server.
I would be thankful if somebody can help me to do this.

First off - This is very "off topic"
The Domino SMTP server is not hard to lock down. Any Notes Admin worth his/her salt should know how to do it. Try to persuade them to run the SMTP stuff using name and password authentication only, or restrict access to an IP address range. This is all easy stuff.
Otherwise DIIOP/CORBA is one way to go. If your toolkit jar files don't work with the server then try using the ones on the server. Look in %noteshome%\data\domino\java for the ncso.jar file.
This works for me on an AS/400 java VM to WinNT/Linux Domino servers of various versions.
How to create an email using this method is again not difficult. All you really need is a blank database template. You have to create a document with certain fields in it (all documented) and then save it. That's all there is to it.
Word of warning DIIOP is not very rapid and careless coding can create problems. Ensure that once you have finished a session you make sure you close it else you will have continual connection problems.
Try searching around the domino/notes groups on how to actually do this.
SH

HT1277 I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

I can send & receive email from my ipad but for some reason I can no longer do this from my i mac.It keeps telling me that the password is not valid with the imap server.I keep entering the password but it won't accept it.

Do you have one, two or more entries in the left colum of Mail.app for your mail server(s)? That is, do you have your Mail.app set up with either a btinternet entry, with a btyahoo entry, or both? Or more?
I'm guessing that you might have one account (btyahoo?) listed for incoming (IMAP server) mail, and with the outbound (SMTP server) mail is configured and named btinternet.
Based on what little I see posted, it looks like BT uses both btinternet and btyahoo, but I'm not exactly clear on how they have their stuff set up, and their web set gets helpful and tries to help configure my mail — I don't immediately see a single web page with the mail server set-up details. The BT email client set-up starts here.

How to send ENCRYPTED email from 10v2

Helllo,
How to send ENCRYPTED email from 10v2 to end users who will receive their emails from Microsoft Outlook?
I created a stored procedure to change user passwords. I need to email the users their passwords but the email message has to be encrypted since it contains user passwords. How do I use util_mail to send encrypted messages? The users will pick up their passwords through Microsoft Outlook. Thank you in advance.

not sure what is the mechanics of decrypting (PGP maybe?)
I have few tips ...
1. look at DBMS_CRYPTO package
2. create JAVA stored procedure (I'm sure there are some good samples to use java for encryption) to encrypt the body (this can be executed from pl/sql)
3. save the body as a file on unix and encrypt it with unix command (this can be executed from PL/SQL utilizing UTL_FILE and JAVA stored procedure)
4. forget sending the password in email and save the password on Oracle Apex site and configure access using single sign-on with transparent windows authentication

Beginner help to send an email from PHP

I hope this isn't too easy to answer - I think I must be doing something fairly simple wrong.
I want to send an email from a PHP page, using SOAP so the mail appears in the sender's sent items, as if it was done in the usual way.
We're using Groupwise 8.02
Using the example code in phpClient/phpClient.php I have got a list of folders/emails in my mailbox, so the authentication and access to Groupwise is obviously working. However, in that file there isn't a send mail example, so I copied the one from phpSOAP/client.php and it doesn't work.....the error seems to be 59920 which might be something to do with the session missing, but I find this hard to believe since the folders can be retrieved with the same object.
Here is the code for mail sending I'm using:
$mail = new Mail();
$mail->subject = "php item";
$dist = new Distribution();
$from = new From();
$from->displayName = "Paul Green";
$from->email = "[email protected]";
$dist->from = "[email protected]";;
$dist->to = "Paul Green";
$rlist = new RecipientList();
$recip1 = new Recipient();
$recip1->displayName = "Peter";
$recip1->email = "[email protected]";
$recip2 = new Recipient();
$recip2->displayName = "Andy";
$recip2->email = "[email protected]";
$rlist->recipient = array ($recip1, $recip2);
$dist->recipients = $rlist;
$mail->distribution = $dist;
$mp = new MessagePart();
$mp->_ = "This is a test!";
$mb = new MessageBody();
$mb->part = $mp;
$mail->message = $mb;
$sir = new sendItemRequest();
$sir->item = $mail;
$sires = $gwservice->sendItemRequest($sir);
Looking around, it seems to me that some of the objects haven't got the properties that the above code expects (eg the from object), so is the schema wrong somewhere?
What I would like, but couldn't find, is some simple example code that works!
Does anyone know the simplest way to send an email via SOAP?
Many thanks in advance for any help anyone can give.
Paul Green
Barton Peveril College
Eastleigh
Hampshire
UK

The phpClient code was a proof of concept.
I only hand fixed a few of the requests.
If you use that code, you will need to go into each
request you want to use and put in code to put in the
session string. You need to do that in GroupWiseService.php.
You may need to modify the individual files, ie Filter.php.
The phpSOAP code works better / easier. You shouldn't have
to modify that code. (You should be able to just use it.)
That said, I only did a spot check. The code is as is. There
is no support for it.
Preston
>>> On Friday, June 29, 2012 at 9:56 AM,
PaulGreen77<[email protected]> wrote:
> Thanks for the suggestions. I tried the phpClient code you suggested,
> but it didn't work at all. I don't quite understand what you say about
> setting the session header string; I think my code does this already.
>
> Early on in the code, after logging in, I have the following line
> $gwservice‑>session = $lres['session'];
> Doesn't this set the session as part of the Groupwise service?
>
> You said I need to manually set the session header string, but which
> objects do i need to do it in? And can I do it as a parameter call, or
> does it need to be done in GroupwiseService.php?
>
> I hope this doesn't make me sound too silly, but I am a bit of a novice
> with OO programming!
>
> Another point: at various places in the code,
> http://schemas.novell.com/2005/01/Gr...groupwise.wsdl is referred
> to, but when I type this into a web browser, it says it can't be found?
> Does this matter?
>
> I hope you can help me a bit further!
>
> Thanks.
>
> Paul
>
> Preston Stephenson;2203363 Wrote:
>> If you can use php 3.x, use the phpSOAP example instead.
>> ftp://sdk.provo.novell.com/ndk/gwsoa...rm/phpSOAP.ZIP
>>
>> It will handle setting the session string header automatically.
>> If you use the phpClient example, you will have to go in to
>> GroupwiseService.php
>> and manually set the session header string in each request you want to
>> use.
>> See getFolderListRequest().
>>
>> Preston
>>
>> >>> On Friday, June 22, 2012 at 9:56 AM,
>> PaulGreen77<PaulGreen77@no‑mx.forums.novell.com> wrote:
>>
>> > I hope this isn't too easy to answer ‑ I think I must be doing
>> something
>> > fairly simple wrong.
>> > I want to send an email from a PHP page, using SOAP so the mail
>> appears
>> > in the sender's sent items, as if it was done in the usual way.
>> > We're using Groupwise 8.02
>> >
>> > Using the example code in phpClient/phpClient.php I have got a list
>> of
>> > folders/emails in my mailbox, so the authentication and access to
>> > Groupwise is obviously working. However, in that file there isn't a
>> send
>> > mail example, so I copied the one from phpSOAP/client.php and it
>> doesn't
>> > work.....the error seems to be 59920 which might be something to do
>> with
>> > the session missing, but I find this hard to believe since the
>> folders
>> > can be retrieved with the same object.
>> >
>> > Here is the code for mail sending I'm using:
>> >
>> > $mail = new Mail();
>> > $mail‑>subject = "php item";
>> > $dist = new Distribution();
>> > $from = new From();
>> > $from‑>displayName = "Paul Green";
>> > $from‑>email = "[email protected]";
>> > $dist‑>from = "[email protected]";;
>> > $dist‑>to = "Paul Green";
>> > $rlist = new RecipientList();
>> > $recip1 = new Recipient();
>> > $recip1‑>displayName = "Peter";
>> > $recip1‑>email = "[email protected]";
>> > $recip2 = new Recipient();
>> > $recip2‑>displayName = "Andy";
>> > $recip2‑>email = "[email protected]";
>> > $rlist‑>recipient = array ($recip1, $recip2);
>> > $dist‑>recipients = $rlist;
>> > $mail‑>distribution = $dist;
>> > $mp = new MessagePart();
>> > $mp‑>_ = "This is a test!";
>> > $mb = new MessageBody();
>> > $mb‑>part = $mp;
>> > $mail‑>message = $mb;
>> > $sir = new sendItemRequest();
>> > $sir‑>item = $mail;
>> > $sires = $gwservice‑>sendItemRequest($sir);
>> >
>> > Looking around, it seems to me that some of the objects haven't got
>> the
>> > properties that the above code expects (eg the from object), so is
>> the
>> > schema wrong somewhere?
>> > What I would like, but couldn't find, is some simple example code
>> that
>> > works!
>> > Does anyone know the simplest way to send an email via SOAP?
>> >
>> > Many thanks in advance for any help anyone can give.
>> >
>> > Paul Green
>> > Barton Peveril College
>> > Eastleigh
>> > Hampshire
>> > UK

Sending RTF Emails from PLSQL To Outlook

Hi,
I am currently attempting to send an email from a plsql program to a Microsoft Outlook program in rtf format as I need the email to be in a particular format. I am using utl_smtp to do this along with rich text format codes. Unfortunately Outlook does not recognise the fact that the resulting email file is in rtf format and displays the item as plain text (i.e. it displays the codes).
Is there any way that Oracle can force Outlook to accept this format ? I've tried adding application/rtf as the mime type in the connection string but all this does is send the email as a word attachment when really what we need is for the email body to be in rtf format.
Thanks in advance,
Paul.

Hi,
I think you will find this is not an Oracle problem. Outlook uses the mime type to decide which application to open it with. The associations between types and applications are buried somewhere in the registry. And if it's not the mime type, it's the 3 letter extension that's used (but you didn't say what extension you were giving the attachment).
If you just open a .rtf file on this computer, the one with Outlook on, by double clicking it, what application does Windoze use to open it? I bet you will find it's Word.
HTH
Chris

Sending HTML email from outlook 2013 exchange it comes broken to non outlook clients.

Hi, when i send out email from my outlook 2013 where is configured Microsoft exchange account it comes broken to gmail clients. All html mail is broken and attachments comes like this file.jpg_ or adobe.pdf_ If i send mail to outlook user
all is good but if client uses something else , they receive broken mail.
Msg comes to gmail clients like this
http://community.office365.com/cfs-filesystemfile.ashx/__key/communityserver-components-userfiles/00-00-39-06-09-Attached+Files/4745.errror.jpg
Without signature and normal phone and email.
Client is using windows 8.1.
I started discussion here http://community.office365.com/en-us/forums/158/p/227602/704778.aspx#704778 but they sent me to your forum. You can read our discussion
and see what i did already.

Hi,
Some question to help narrowing down the causes:
1. Does this issue occur when using Outlook to configure the Gmail account, does the format change?
2. Does this issue also occur when sending HTML emails to other remote domains?
If the emails is fine when opening them on Outlook, it think Exchange does not change anything on the email. The issue occurs depends on how email clients open the email.
Thanks,
Simon Wu
TechNet Community Support

Sending the email from the sap gateway

hi,
           Any body please help me how to send the email from the sap end. what is the funcion module used for that one what the parameters need to pass for that function module.

Hi, check if below code is helpful
Variables for EMAIL functionality
DATA: maildata   LIKE sodocchgi1.
DATA: mailpack   LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: mailhead   LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: mailbin    LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailtxt    LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: mailrec    LIKE somlrec90 OCCURS 0 WITH HEADER LINE.
DATA: solisti1   LIKE solisti1 OCCURS 0 WITH HEADER LINE.
PERFORM send_form_via_email.
      FORM SEND_FORM_VIA_EMAIL                                      *
FORM send_form_via_email.
CLEAR:    maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
REFRESH: mailtxt, mailbin, mailpack, mailhead, mailrec.
Creation of the document to be sent File Name
maildata-obj_name = 'TEST'.
Mail Subject
maildata-obj_descr = 'Subject'.
Mail Contents
mailtxt-line = 'Here is your file'.
APPEND mailtxt.
Prepare Packing List
PERFORM prepare_packing_list.
Set recipient - email address here!!!
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
APPEND mailrec.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = maildata
      put_in_outbox              = 'X'
    TABLES
      packing_list               = mailpack
      object_header              = mailhead
      contents_bin               = mailbin
      contents_txt               = mailtxt
      receivers                  = mailrec
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
ENDFORM.                    "send_form_via_email
     Form PREPARE_PACKING_LIST
FORM prepare_packing_list.
CLEAR:    mailpack, mailbin, mailhead.
REFRESH: mailpack, mailbin, mailhead.
DESCRIBE TABLE mailtxt LINES tab_lines.
READ TABLE mailtxt INDEX tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( mailtxt ).
Creation of the entry for the compressed document
CLEAR mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
APPEND mailpack.
mailhead = 'TEST.TXT'.
APPEND mailhead.
File 1
mailbin = 'This is file 1'.
APPEND mailbin.
DESCRIBE TABLE mailbin LINES tab_lines.
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'TXT'.
mailpack-obj_name = 'TEST1'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
APPEND mailpack.
*File 2
mailbin = 'This is file 2'.
APPEND mailbin.
DATA: start TYPE i.
DATA: end TYPE i.
start = tab_lines + 1.
DESCRIBE TABLE mailbin LINES end.
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = start.
mailpack-body_num = end.
mailpack-doc_type = 'TXT'.
mailpack-obj_name = 'TEST2'.
mailpack-obj_descr = 'Subject'.
mailpack-doc_size = tab_lines * 255.
APPEND mailpack.
ENDFORM.                    "prepare_packing_list

How do i send an email from acrobat adobe?

How do i send an email from acrobat adobe? please help

What email application?
Two ways are shown, Acrobat 9
File > Attach to Email or via the Icon/Button

Cannot send an email from my alias Mobile Me account from the iPhone.

I have a Mobile Me email account which works perfectly on my Mac and iPhone. I created a an Alias Mobile Me Account on the web.
I am able to create a new email from the alias account on the Mac.
The iPhone will not recognize the alias account, I cannot add it or sync the account.
I cannot send an email from my alias Mobile Me account from the iPhone.

To all frustrated MobileMe alias owners who want to send email from iPhone - please go to the feedback area of the apple.com and leave messages regarding this issue. I had a lengthy conversation with a tech support guy who agreed that this is a needed fix - he said to initiate a grass roots effort - and that by all of us leaving messages it will eventually get attention and fixed. Why would Apple give us the ability to create alias's, use them on mobileme website, on our mac mail programs, but NOT the iPhone, which is the MOBILE device. Silly. Please protest!! Thanks.

TS3899 When sending email from the Mail App or through other Apps, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design.

When sending email from the Mail App or through other Apps on my iPad, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design, especially since I had already checked the From: address.
iPad 4 running iOS 8.1.3

3rd party email addresses have to be deleted on every synmced mac product, although I have 1and1.co.uk and my imac updatetes the mails in that account from mac mail.
Yahoo etc is a 2 step deleting process but good to get your emails pushed when on the go.
LJ
http://www.facebook.com/The.Cowboy.Party

I am sending an email from one account on iphone 4s but the replies are coming into another account on my phone

I have had an iphone 4s for about a year and have 4 email accounts that come in on it: verizon, gmail, my work, and icloud. Periodically, I send an email from one account, it shows the message as sent from that account in my sent mail, but the recipient receives it from the gmail account and therefore replies to the gmail. Has anyone had this happen? It is almost as if my messages are bouncing into gmail when I send them, although on my phone it shows as having been sent from another account. I have not had this happen on my computer where I have all of these emails coming in as well. I thought perhaps it was me not being careful about which account I was sending from when using my phone, but the mail I sent this morning I was very careful to make sure was from verizon, the sent mail on my phone shows it was sent from verizon, and the reply came in on gmail. Gmail isn't even the default email address- verizon is! My iphone is using version 6.1.3. Does anyone have any ideas? This is a major problem for me so I appreciate any ideas! Thank you!!!

I am not sure whether this is related, but I had a problem with Gmail where each time I sent and email via my iPhone it would bounce back in my Gmail account as unread. You migh want to check this Google article explaining why this happens and how to avoid it:
https://support.google.com/mail/answer/1710338?ctx=gmail&hl=en-GB&authuser=0

Sending an Email from UDF if incoming file is empty

Similar Messages

Maybe you are looking for