Sending an error/ok to sender web service

Hi
I'm using a SOAP(async) adapter to receive and send messages from and to a web service. The sender party would like to receive a error/ok status from XI if the SOAP message was delivered successfully. Can someone please advise here.
Thanks in advance
Clinton

Hi Clinton,
I am pretty sure that the adapter gives back standardized
exceptions.
You could also use the faultmessage functionalities
in the message interface.
Maybe this helps:
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
Browse SDN, there is a lot of stuff about this
regards
Dirk

Similar Messages

ABAP proxy client sending to XI by using the WEB Service

Hi
I have scenario where ABAP Proxy need to send the data by calling a web service middleware as SAP XI/PI,
Can anyone please provide the details of the scenarion that ABAP Proxy calls the webservice to send the data and receive it back the response, (Synchronous communication)
Thanks
PR

Hi PR
My understanding of your requirement is like
Proxy <-> XI <-> SOAP.
Steps.
1. Create Client proxy to send data to XI
2. Import the WSDL provided by receiver system in XI
3. Do IR steps
4. ID - SA is not required
5. Configure Receiver SOAP adapter using the URL and Soap Action from the WSDL you received.
Thanks
Gaurav

Error when test a Web service

Hi all,
I am trying to create a web service for RFC Function module. I ceated the web service, now I want to test this Web service. I have the URL of WSDL file, but when I execute the URL, it doesn't display.
Can you please suggest me what will be the reason for this error?
Thanks
Sanket sethi

Please find below the steps to create and test web services.
Please follow up these steps and you would not get any error in testing web services.
Hope this would help you.
1. Go to SICF and activate this webservice: u201C/sap/bc/srt/rfc/sap/QUERY_VIEW_DATAu201D
2. Go to transaction WSCONFIG andenter service destination u201CQUERY_VIEW_DATAu201D and enter variant u201Cquery_view_datau201D and hit
enter. Currently, there are no released services so create a new service.
3. Choose Save to release this web service.
4. Choose ICF Details -> External Aliases
5. Choose u201CNewu201D to create a new external alias.
6. Enter external alias u201C/sap/bw/xml/soap/queryviewu201D and enter description u201CSAP BI Web Service u2013 XML Result Setu201D
7. Specify your security and user ID on the u201CLogon datau201D tab.
8. Specify u201C/sap/bc/srt/rfc/sap/QUERY_VIEW_DATAu201D under the u201CTrg Elementu201D tab.
9. Save your external alias.
10. Go to transaction WSADMIN -> Goto -> Administration Settings. Ensure that the path to your J2EE is specified here and save this.
11. Find your web service and choose the u201CWeb service homepageu201D
12. Login to your ABAP system from the Web Service Navigator
13. Choose Test -> GetQueryViewData to test this service.
14. Enter and Infoprovider and Query and send the request to test this web service. Note: If the query has mandatory variables, those must be passed in the parameter. For the sake of this test, use a query without variables.
15. Ensure the request and response are successful.
16. If you have issues, make sure you activate your Web Service and Interface in SE80.
17. Here is an example of how to pass parameters for filter values using WEB API commands. We are passingtheFILTER_IOBJNM=0D_CHANNEL and FILTER_VALUE=3.
18. Here is an example of how to pass parameters for variable values using WEB API commands. In this case, we are using a selection option variable. We are passing the following parameters:
VAR_NAME_1=DISTGOP
VAR_OPERATOR_1=EQ
VAR_VALUE_LOW_EXT_1=3
VAR_VALUE_HIGH_EXT_1=5

SOAP receiver adapter error using Google Search web service

Hi all,
I'm trying to connect and old 4.5b system to XI SP16 to make it receive information from external Web Services.
My scenario is made up of a sender RFC adapter and a SOAP receiver which is sending the message to the Google web service (http://api.google.com/GoogleSearch.wsdl) and then awaiting a response from it.
I'm stuck with this error: "No Deserializer found to deserialize a ':key'". The problem is that XI is sending this kind of message:
          <m:doGoogleSearch xmlns:m="urn:GoogleSearch" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
               <key>mykey</key>
               <q>testing</q>
               <start>0</start>
               <maxResults>1</maxResults>
               <filter>true</filter>
               <restrict>String</restrict>
               <safeSearch>true</safeSearch>
               <lr>String</lr>
               <ie>String</ie>
               <oe>String</oe>
          </m:doGoogleSearch>
while Google is expecting this:
          <m:doGoogleSearch xmlns:m="urn:GoogleSearch" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
               <key xsi:type="xsd:string">mykey</key>
               <q xsi:type="xsd:string">testing</q>
               <start xsi:type="xsd:int">0</start>
               <maxResults xsi:type="xsd:int">1</maxResults>
               <filter xsi:type="xsd:boolean">true</filter>
               <restrict xsi:type="xsd:string">String</restrict>
               <safeSearch xsi:type="xsd:boolean">true</safeSearch>
               <lr xsi:type="xsd:string">String</lr>
               <ie xsi:type="xsd:string">String</ie>
               <oe xsi:type="xsd:string">String</oe>
          </m:doGoogleSearch>
with explicitly declared xsi:type.
I've tested both messages with XMLSpy and the first one is always returning the same error.
Is there a way to make XI send an XML message with written xsi:type?
Many thanks in advance!
Max

Hi Ricardo!
I followed your suggestion to create a simple XSLT mapping program (in the ABAP stack) and I added it to the Interface Mapping in the Integration Repository. The result is exactly the soap message that the Google web-service is expecting.
I'm attaching the XSLT code below in case somebody has the same problem... thanks again for your hint!!
Regards!
Max
<xsl:transform version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:sap="http://www.sap.com/sapxsl"
>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
<ns1:doGoogleSearch xmlns:ns1="urn:GoogleSearch" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
      <key xsi:type="xsd:string"> <xsl:value-of select= "//key"/> </key>
      <q xsi:type="xsd:string"> <xsl:value-of select= "//q"/> </q>
      <start xsi:type="xsd:int"> <xsl:value-of select= "//start"/> </start>
      <maxResults xsi:type="xsd:int"> <xsl:value-of select= "//maxResults"/> </maxResults>
      <filter xsi:type="xsd:boolean"> <xsl:value-of select= "//filter"/> </filter>
      <restrict xsi:type="xsd:string"> <xsl:value-of select= "//restrict"/> </restrict>
      <safeSearch xsi:type="xsd:boolean"> <xsl:value-of select= "//safeSearch"/> </safeSearch>
      <lr xsi:type="xsd:string"> <xsl:value-of select= "//lr"/> </lr>
      <ie xsi:type="xsd:string"> <xsl:value-of select= "//ie"/> </ie>
      <oe xsi:type="xsd:string"> <xsl:value-of select= "//oe"/> </oe>
   </ns1:doGoogleSearch>
</xsl:template>
</xsl:transform>

Error in calling External web service from soa suite 11.1.1.3

Hi
I am getting following error while calling external web service......
####<Jan 20, 2011 6:54:26 PM IST> <Warning> <oracle.integration.platform> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-490B9BABECE372A277DF> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529866047> <SOA-20136> <WS Binding: exception durign SOAP invocation: java.util.NoSuchElementException>
####<Jan 20, 2011 6:54:26 PM IST> <Warning> <oracle.soa.mediator.common> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-490B9BABECE372A277DF> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529866047> <BEA-000000> < Payload after BaseActionHander.requestMessage :{parameters=oracle.xml.parser.v2.XMLElement@bd2382}>
####<Jan 20, 2011 6:54:26 PM IST> <Warning> <oracle.soa.mediator.common> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-490B9BABECE372A277DF> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529866063> <BEA-000000> < Properties after BaseActionHander.requestMessage :{ReferenceInstance=[email protected]63ea5,
####<Jan 20, 2011 6:54:29 PM IST> <Error> <oracle.webservices.service> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529869375> <OWS-04115> <An error occurred for port: FabricProvider: javax.xml.rpc.soap.SOAPFaultException: oracle.fabric.common.FabricInvocationException.>
I am able to hit external ws from soap ui and getting response but while calling from soa suite getting this error.
Any clues?
Thanks
Vibhor

WS Binding: exception durign SOAP invocation: java.util.NoSuchElementException
Looks like the error is in the data sent to or expected from the service in your composite. Check that audit logs and composite flow to make sure your soap message when using soapui matches what you are working with in soa suite.

Error while completing a web service

Hi,
I have create a RFC, now to use that as a web service I have done the stpes for creating a web service as given in the link
sap technical link tutorial, web service create
when I click on complete button system is giving a messge as Error during activation of web service.
what configuration required for this we have ECC6 system.
regards,
zafar
Edited by: zkarnalkar on Dec 3, 2010 11:13 AM

I guess that would depend on the error you're receiving - what is it? I've never seen a generation error for a service provider when following the few steps required, but you could debug the activation if the message isn't clear. Service consumer errors happen all the time and are generally related to WSDL file compatibility.

"RABAX" occurs on server side error while testing asynchoronous web service

I got error while testing asynchronous web service in WS navigator. I have created asynchronouse web service using RFC. Then I configured it in SOAMANAGER. When I tested it, got error "RABAX occurs on server side". Also I got dump in ST22. It is 'UNCHAUGHT_EXCEPTION - CX_SOAP_SEQ_SCD_ERROR'.
I have tested for synchronous web service it works fine. I found a difference in both web service WSDL file for below parameters value -
commit
blocking
transaction
wsrm
I tried different way .. but no solution .. Plz suggest if someone have any idea.....Its very helpfull....

your problem:
Missing class: oracle.tip.adapter.jms.JmsManagedConnectionFactory
Dependent class: oracle.tip.adapter.fw.wsdl.WSDLUtils
Loader: oracle.bpel.common:10.1.3
Code-Source: /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar
Configuration: <code-source> in /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml
It happens when server is custom installed, try to reinstall it as full version and problem should disappear otherwise your need another full installation to retrieve and replace orabpel.jar file from (or maybe more)

Receiving the internal 500 error while testing java web service

HI,
Problem Summary:
Receiving the internal 500 error while testing java web service in integrated weblogic server.
my scenario is like,
retrieve the Payload from Dehydration tables.
We are connected to SOA_INFRA schema and we are retrieving the payload from the dehyadration tables based on InstanceId and ECID using Java Classes.After that i make it as a web service and i deployed in to intergrated weblogic Server.It is generating the Target End Point URI.When am i hitting this it is showing structure of the service.I am testing this service from soapUi it is returning the Server internal error with 500.Here i am passing inputs as InstanceId and ECID.
I had verified in my Jdeveloper,Proxy settings are available.
Error Payload:
I am receiving the Internal 500 error because of JDeveloper HTTP Analyzer encountered an error retrieving: CONNECT https://192.168.0.41:9102 HTTP/1.0.
An exception occurred while retrieving the response for https://192.168.0.41:9102.
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.checkEOF(SSLSocketImpl.java:1293)
     at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:65)
     at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:50)
     at oracle.jdevimpl.webservices.tcpmonitor.model.HttpMessageBase.readLine(HttpMessageBase.java:658)
     at oracle.jdevimpl.webservices.tcpmonitor.model.HttpRequest.read(HttpRequest.java:327)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.getResponse(ConnectionHandler.java:405)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.run(ConnectionHandler.java:331)
Caused by: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
     at com.sun.net.ssl.internal.ssl.InputRecord.handleUnknownRecord(InputRecord.java:523)
     at com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java:355)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:798)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1165)
     at com.sun.net.ssl.internal.ssl.SSLSocketImpl.getSession(SSLSocketImpl.java:1916)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.negotiateSSL(ConnectionHandler.java:707)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.negotiateForwardedSSLConnection(ConnectionHandler.java:672)
     at oracle.jdevimpl.webservices.tcpmonitor.ConnectionHandler.run(ConnectionHandler.java:311

An exception occurred while retrieving the response for https://192.168.0.41:9102.
javax.net.ssl.SSLException: Connection has been shutdown: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?This error says that port 9102 is a plain HTTP port so either use the correct port (which is listening for HTTPS connections) or use HTTP instead of HTTPS in the URL.
Regards,
Anuj

Error During Activation of Web services

When I try to create a web services using RFC and try to complete the steps in the wizard. I am getting error message as "Error during Activation of web services". and also when configure service in wizard, im getting only two profiles as "Basic Authorization: SOAP PROFILE" and "Secure SOAP PROFILE". Kindly do the needful.
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Aug 8, 2011 1:33 PM

Olivier, thank you so much
SOAMANAGER does not exist in my system (sp level 8), so node "/sap/bc/soap/rfc" should be active. Actually, it is active.
I think the problem is related to user rights/profiles.
I have tried to create another WS after assigning role SAP_BC_WEBSERVICE_ADMIN. The same error when trying to activate it, but now, I can see this WS in SE80 (under "Enterprise Services->Service Definition"). It is not active there and if I try to activate it, a success message appears indicating that user "is not authorized to use function netzwerkadministration". I cannot see any new services in SICF...
Probably the new entry in SICF will be created after activating WS in SE80...
Do u know what user profile should I add in order to properly activate the WS in SE80?
Thank you very much!
Vicente

Error: Error #2170 Connection Type: Web Service

Hi all,
In BO I have changed the external address on DNS say abc.com
Now when I try to access the dashboard internally it gives the error trying to access xyz.com which was previous external ip.
The error I get is
To access external data, add a cross-domain policy file to the external data web server.
For more information, on the Adobe website, see the article "Cross-domain Policy File Specification".
If the problem persists, contact the file creator or your system administrator.
Error: Error #2170
Connection Type: Web Service
File URL: http://abc.com...
External Data URL: http://xyz.com...."

May be in connections, you have hardcoded the server as xyz.com. It is always advisable to use relative url so that the servername and port is resolved in runtime.
Also, check in CMC > Applications > Web Service > Properties what is the server name specified ? Is it still the old one ?

Errors when compiling the web service (SAP Web Service Design Tool)

After downloading and installing the SAP de Web Service Design Tool (for Crystal Reports Server) I created a connection, a simple query and was able to deploy a web services. I tested the web service with an Xcelsius dashboard within InfoView. Thereafter I created a second connection (other name but same ODBC connection / server) and created another simple query with two date(range) parameters and a group by year and month function in order to do a select count(). It executes fine, but when I try to publish the web service I get an error.
There are errors when compiling the web service.
Is does not say whatu2019s wrong or how I can solve this problem.
Who can help me?
Some notes:
1) Within expert mode I used a MONTH() SQL function which does not show in the normal mode.
2) It seams that the u2018administrationu2019 of Web Service Design Tool got u2018corruptedu2019 after only creating the two connections, queries and services mentioned above. I believe so because I could select one of two queries when I created the second service, but within the current connection I had only one query.
Thanks for any help,
Ron
ADDITIONAL INFO: The parameters seam to be the problem. After removing the parameters I can publish the service. But without parameters it is NO SOLOTION.
Edited by: RonKoudijs on Aug 26, 2010 6:28 PM

Hello Taylan,
I think the error that you received was due to packaging issues.I placed the
UtilClass.java file under a directory called data which was present under
the project directory.
When you want to access a java class, you can either place the compiled
class file in the WEB-INF/classes folder or you can place the java file
under the project directory.
I have attached the sample project that I created with your files.
Let me know if you have any other questions.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"taylan" <[email protected]> wrote in message
news:3d6351b0$[email protected]..
>
I am trying to write a simpe web service in WebLogic Workshop, but havingan error
which I could not understand. Could you please help me? Thanks in advance.
Regards,
Taylan
My web service code is like belows:
import weblogic.jws.control.JwsContext;
import data.*;
public class WebService1
/** @jws:context */
JwsContext context;
* @jws:operation
public UtilClass testType(UtilClass tTest){
UtilClass returnObj=new UtilClass();
if(tTest.getName()!= null){
returnObj.setName(tTest.getName());
return returnObj;
and my UtilClass is placed in the data directory under the same directorywith
my web service code. It is a simpe class as belows:
package data;
public class UtilClass
private String name;
public void setName(String name){
this.name=name;
public String getName(){
return name;
However I got an error when I try to compile the webservice class. Theerror is
like belows:
File Line Message
WebService1.jws 0 Resource found on system classpath: data.UtilClass
Build complete - 1 error(s), 0 warning(s)
[ngroup.zip]

How to check error type in accessing web service?

Dear all,
I have created a form using WSDL connection to access web service in SOAP protocol.
But I have difficulties in error handling when acccessing web service.
I try to put a try catch block for the following statement :
ie. xfa.connectionSet.WebServiceDC.execute(false);
in case for any error, I can only catch message saying GeneralFault only.
Is there any extra object in the script that I can catch to handle for different error type?
e.g checking SOAP.? and where should I put the codes in?
Actualy I want to detect if network connection is not ok or if it fails to find ecert which is required under https connection
Rgds.

Have you tried the try catch block ?
See the error codes it responds with.
Then look through the properties of the Exception
try
    doInit();
} catch(err)
    var vDebug = "";
    for (var prop in err)
       vDebug += "property: "+ prop+ " value: ["+ err[prop]+ "]\n";
    vDebug += "toString(): " + " value: [" + err.toString() + "]";
    status.rawValue = vDebug;
function doInit()
    doWebServiceCallThatFails();
Have fun with these articles
http://blogs.adobe.com/formfeed/2009/06/collected_form_development_and.html
http://blogs.adobe.com/formfeed/2009/03/handling_javascript_exceptions.html

I get an web service error when trying enable web services. I have latest update and rebooted

i get an web service error when trying enable web services. I have latest update and rebooted

hi there philnj,
could you help the community narrow troubleshooting by providing a little more information? Particularly what model printer are we dealing with?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Error when querying REST web services from web-based InfoPath form 2013 environment

Error when querying REST web services from web-based InfoPath form 2013 environment, we are trying to consume REST web service in InfoPath form ( SharePoint 2013 version)
http://spapp/sites/litigation/Intake/_api/web/lists/getbytitle('Email%20Profiles')/items(1)
it works in preview but does not when it is published. because of claim based authentication i m getting below error
The form cannot run specified query, the underlying connection was closed. An expected error occurred
same works in 2010 environment .. are we missing anything in 2013 servers?? please let me know how we can resolve it.. thank you
guru

everyone face this issue, nothing in event viewer, its easy to reproduce error at ur end also..
just you need to use below web service in infopath and populate some data on form load like id = 1 pull the title and try to set in form any field...the
list has one item thats all
guru

Error deploying custom java web service -Jdeveloper11.1.1.3.0

Hi all,
Error deploying custom java web service in - Jdeveloper 11.1.1.3.0
Weblogic Server Exception: weblogic.deploy.api.internal.utils.DeployerHelperException: The source 'C:\DOCUME~1\.......\LOCALS~1\Temp\.xyz..........Project-context-root.war'
for the application 'xyz....Project-context-root' could not be loaded to the server 'http://hostname:port/bea_wls_deployment_internal/DeploymentService'.
Server returned HTTP response code: 409 for URL: http://hostname:port/bea_wls_deployment_internal/DeploymentService
See server logs or server console for more details.
weblogic.deploy.api.spi.exceptions.ServerConnectionException: [J2EE Deployment SPI:260041]Unable to upload 'C:\JDeveloper\mywork\MyApllicationName\Project\deploy\xyz........Project-context-root.war' to 't3://hostname:port'
#### Deployment incomplete. ####
Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
Thanks
Edited by: soauser on Sep 3, 2010 8:55 AM

Any help for the above post is appreciated..
Edited by: soauser on Sep 3, 2010 11:58 PM

Sending an error/ok to sender web service

Similar Messages

Maybe you are looking for