Sending an incoming caller a message on iOS7.

How do I send a message to an incoming caller on iOS7 while my phone is locked? That is, I want to decline the call and send the person a message, but it doesn't appear as though iOS 7 will allow me to do so. While my phone is locked, I only have the "Swipe to answer" option or the "Remind Later" option.

There is no keyboard shortcut to send message.
Only via trackwheel click.

Similar Messages

My iphone 4s is no longer making sound when i have an incoming call or message after installing ios7.... any help?

My iphone 4s is no longer making sound when i have an incoming call or message after installing ios7.... any help?
It still vibrates but no calling sounds or message sounds. It's not on mute and the speakers are working... I can hear music etc.
Oh yeah no keypad noises either.

Same thing has happened to me. I have tried every trick that's been posted here. I just ran out of options. Galaxy phone is starting to look better by the minute.

My iphone battery level more than 50% but if any incoming call or message, my phone going off. How can i repair my battery?

My iphone battery level more than 50% but if any incoming call or message, my phone going off. How can i repair my battery?

i Had a simular issue years ago with my blackberry on ATT. As it turned out, my SIM had some issues. I would head over to your carrier and get a free sim replacement. It could be a phone or SW issue, but the Sim is my first guess give my experience

I can't get skype to alert me of incoming calls/videos/messages on my apple device

I can't get skype to alert me of incoming calls/videos/messages on my apple device, unless I have the app open in front of me.I have tried to contact different microsoft help desks. I have checked all my settings and have looked at all the help forums available and now am turning to you.Isn't it possible to be notified of incomming calls/videos/messages when my phone is in standby mode? Any help?

I'll assume you have allowed notifications from Skype turned on both in the device settings and in the app settings.
The only other thing I can suggest is checking that the conversations have not been muted by the app (go into the conversation, tap ..., tap notifications and make sure notifications are on) as the iPad version has a nasty habit of doing this without warning.

Skype not receiving incoming calls and messages- only when I sign in again will I receive

My skype has been acting up after 7.6. Everytime someone calls me or messages me the first time it logs in, I wont receive a call or notification. Only when I sign out and sign back in will I get a notification saying I missed a call. But in the first place, I didn't even receive one. There was no pop up incoming call. I also won't receive recent instant messages unless I repeatedly log in and outPlease help me find a solution. I've tried uninstaling and reinstalling 3 times already and the problem still persists . Thank you!

Do any other SIM cards work in it ? Sounds like it could be blacklisted.
Normally when a handset is blacklisted , you can send and receive SMS , but not make or receive calls.

RFC Sender Adapter error " Call to messaging failed"

Hi,
I have been trying the RFC-> XI->File scenario.When I execute RFC using se37 transaction
on R/3 box,it gives the error " Call to messaging failed:
com.sap.aii.af.ra.ms.api.DeliveryException".
I have looked at msg in XI server using SXMB_Moni transaction.I found that,program is unable
to find the interface mapping function (Mapping between RFC and Inbound interface).
I have done the following settings:
For Sender :
1.RFC is being used as outbound Interface.
2.Imported RFC from R/3.
3. The R/3 functionality is to retrieve records.
For Receiver:
1.Defined Inbound ,Async. Interface.
2.Defined Data Type and Msg type
3.Defined Fault Message type
Mappings:
1. Message Mapping is defined for Inbound Message(From RFC) and Outbound Message
2. Source Interface(ZRFC) and target Interface(Inbound Interface) mapping is defined.In this mapping I am unbale to defined Mapping for Response and Fault.I have just deifned for Request as tabs are not gettting enabled after click of 'Read Interface'.
All necessary configurations have been done in Intergration Directory.
I am getting XML message at receiver at without data where rfc retireves two records.Why this is not being done?
As there is no mapping for Fault message of Inbound interface with RFC interface,I think mapping no found error is coming.
PS. I have not done the message mapping between ZRFC.Response and Inbound Message.
Please comment,where I have gone wrong.
Thanks & Regards,
HImanshu

Hi,
I don't know if the info below will solve your problem. Your scenario is an asynch scenario, therefore, the RFC must be executed as a qRFC. SE37 executes the RFC as synch.
To execute the RFC as asynch, you must tested with a report (se38):
The RFC must be executed as a qRFC.
data: DEST LIKE RFCDES-RFCDEST VALUE 'MY_RFC_DEST'.
CALL RFC
     IN BACKGROUND TASK
     DESTINATION DEST
     EXPORTING
COMMIT WORK.
The COMMIT WORK is required to send the RFC.
Regards,
Bill

Iam a new user of iphone..When the screen is on lock, you cant hear incoming calls or messages..Is there away when locked you can still hear your phone when a call or message comes in?

Iam a new user of the iphone 4s. When the screen is locked, its on silence.How can you change that so when it's on lock, you still can hear if a call or message
is coming in? I cant always be looking at my screen, so it would be nice if I can hear it

What do you mean "out of warranty"? Warranty is for a year right? Or am I out of warranty because the phone cracked? I'm a noob...
I'm still covered I think. I got the phone in December.

SPA 2102 after RV082, Drops sending on incoming calls at random

Hi, I have read how it should be possible to have a SPA 2102 working together with a RV082 on this page
http://www.cisco.com/en/US/products/ps9923/products_qanda_item09186a0080a365b1.shtml
Have followed how it should be configured. Opened ports on the RV082 router and configured the SPA2102 for static IP and enabled it to work with NAT.
The phone works however, kind of random it drops the incoming calls on my transmitting side. So if someone calls, randomly it seems, the other person can loose my transmitting side and not hearing me talk anymore, and I can hear "Hello? You still there?"If hang up and the person dials again, there is incoming signal, I lift the phone and it totally quiet, can't hear a thing.
Anyone has ideas what to do with this problem? They are both Linksys products, and as there are even instructions how to make them work together, it should be possible right?
By the way, I only use one of the Internet ports, don't use the second one. Have a direct Ethernet link for the Internet 100/10 so there is no DSL involved.
I could have them rigged up the other way around SPA2102 to RV082, but there are some issues then when it comes to port handling, and if I remember correct the SPA2102 is only 10/10.
-settings-
I have set the SPA2102 as DMZ on my RV082 router.
Have forwarded port 3478, 5060-5080,5004,10000-20000,16384-16482 (this should proboly be obsolete)
Have set port 8 as it is conneted to as High.
Have set Firewall/Accesss Rules for this IP to be Priority 1 and allow all traffic.
Have included jpg screenshots of settings for my SPA2102.
Any help would be appreciated.

If your forwarding all those ports to the device and it is still acting up. I would try a factory reset of the spa2102 and reconfigur it. Have you checked to see if you have the latest firmware on the spa2102. If not upgrade that and reset the spa2102 and reconfigure it. With it being in the dmz host section on the router, it should not have any issues. The dmz host does not have any firewall rules or any blocked ports pertaining to it so it should be fine with no blocks. Give that a shot and lets us know.

Some incoming calls and messages display the phone number instead of name

I recently upgraded from a Blackberry to an iPhone 4s. When I receive a call or SMS on the 4s it often displays only the phone number instead of the name at the top of the screen even though I the correct name and phone number are entered the correct fields in the iPhone address book. I assume there was some kind of conflict when I imported the names from the blackberry (or from my Google contacts list - I can't remember which now). Have any of you experienced this problem? How did you get it resolved?

Umm,
I cannot replicate this.
If I deliberately send to my iPhone Number and reply to that (My iPhone is set to use the iPhone Number) after I have moved Messages behind another app the Notification show my Name and not the number.
I am using iCloud to sync the Contacts apps.
8:25 pm Monday; April 20, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

TS2755 Does anyone have an issue with sending youtube links via text message with ios7?

I recently downloaded IOS 7 on my iphone 5. I cannot forward youtube links via text message. Does anyone have the same issue?

Found the issue. It seems that IMessages requires area code as well for local phone numbers. I never had the area code for local phone numbers with IOS 5 and IOS 6. It always worked before.

Cannot send or recive calls or messages.

I have a Samsung Galaxy Tab 2 10.1 and have had consistent problems with calls and IMS.
I will sometimes appear as "not connected" and calls will fail while IMS appear as "pending".
Other times, calls will fail or have no answer but IMS works.
The contact appears offline but is online in some instances.
I have attempted clearing data and cache, forcing stop, restarting the tablet, reinstalling skype, resetting my modem and router, and setting my tablet to factory default yet the problems still occur.
Any advice on solving these issues is greatly appreciated.

Denese59,
We need to get your service up and running again! We definitely suggest getting a new SIM card as StreetDocRN suggested, but if that does not work please let us know. There is further trouble shooting that can be done.
SarahO_VZW
Follow us on Twitter @VZWSupport

Problems hearing an incoming caller after update to ios7

Since I upgraded to the original ios7 update I cannot hear when speaking or hear the other person when speaking directly from headset - it is very muffled. I can hear fine on bluetooth or with earphones - any advice

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

My Iphone 5 updated to IOS 6.2 and now my contact names do not show on incomming calls or text messages. All i can see is the number of the person calling. how can i fix this?? please help

I updated my iphone software to IOS 6.2 yesterday and im not sure if it is a coincidence but now, my contact names do not show on incomming calls or messages. Also they do not show on past calls or recent history.
All my contacts in my phonebook still exist and are correct, the problem only occurs when receiving calls or messages. please help i need this fixing
Regards,
Frosty

Try to restore your iphone via iTunes or update to ios6.1.2.
If itunes gives an error with restoring (DFU/Recovery or just normal)
try this:
open your computer and search on windows; C://windows/system32/drivers/etc/hosts
open up the hosts file in note pad you will see IP adresses and more add another line and put in this:
#74.208.10.249 gs.apple.com
this is a by-pass to the cydia/saurik restore server, it has nothing to do with jailbreaking over voiding apple's warranty
let me know if succeeded!

Why are my Text Contacts and incoming calls only are showing as "Message Received"

All of my text contacts messages just say "Message Received", but if I have set a ringtone for them, that is the ringtone that plays. The same is true of incoming calls, It will show the phone number, but not the assigned name. I don't know everyone's phone number! I barely remember mine!
HELP?? Please ?!
How do I get my caller ID to work properly again?
I have a Galaxy S3
Thanks

Hey there, celtmaidn! Thank you for bringing this matter to the community. I'm sorry that your Caller ID isn't providing you with the details you need, but I'm happy to help. If I understand correctly, incoming calls and messages do not display the name of any of your calls or messages, just the number. Does the same occur on your outbound calls and/or messages? Also, you may have a contact (example: Dave) that you have programmed in your S III with a mobile number, but "Dave" may have a home number as well. Have you confirmed that the number used for that call or message is the same one you have programmed into your device?
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

IPhone Voice Memos Interrupted By Incoming Calls

I notice that every time I use my Voice Memos software on the 3G(s), if an call comes in, the Voice Memo stops recording and I won't know it till I look at the phone later. Is there ANY way to stop that for that not to happen and you can have perhaps the calls go directly into voice mail so that the Voice Memo feature doesn't get interrupted? It's useless to me otherwise.
Thanks for anyone's input!

The voice recorder application - just like every other iPhone application, native or 3rd party - will shut down when you receive a phone call. The iPhone operates under the assumption that the device is first and foremost a telephone.
As far as work arounds go, you can always put the phone in airplane mode when you need to use the voice recorder app uninterrupted. This will send all incoming calls directly to voicemail.
Message was edited by: Ansuz82

Sending an incoming caller a message on iOS7.

Similar Messages

Maybe you are looking for