Sending and receiving email problem

for three months I have been unable to receive and send emails.  Is this just a storage problem and if so is there an alternative to buying more storage space?
Thanks,
not happy iCloud customer

Hello iCloudsti"ks,
Thank you for contacting Apple Support Communities.
It's hard to say from the limited information what could be causing your issues. You can use the following article to troubleshoot your send/receive issues with iCloud mail:
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/TS4002
Regards,
Jeff D.

Similar Messages

  • Mail (5.3) OS X 10.7.5 mail program crashing when opening an email with attachment. Any suggestions out there? I can open the mail program...send and receive emails...click on emails without attachments with no problem.

    I am having a problem successfully opening an email containing attachment. I can open the mail program...send and receive emails...and view emails that do not contain attachments. But whenever I click on an email containing an attachment, I get the spinning beach ball for a few seconds and then the entire program closes. Any suggestions before I make a one hour trip to the Apple store for help?

    I don't think an interactive portion of a PDF is an obscure problem (lots of designers I know use rollable PDF files for emailing 3D models) and while I understand that it's in a legacy program, there is no guarantee if I purchase Acrobat X, that the same problem won't exist. It's no an issue in Reader 10 but then again, it wasn't an issue in Reader 9 either. Since Adobe doesn't give trial versions for Mac (stupid), I have no way of checking this. The problem doesn't annoy me as much as being an Adobe product user who upgraded only to not have functionality and not have a way to have it resolved.

  • Problems sending and receiving emails using exchange when on wifi - OK when using Sim Card

    I've an iphone 4S using Exchange to link up with company server, this works fine when using 3G - phone's Sim Card. But when I join a wifi network I can no longer send and receive emails until I disconnect from the wifi network.
    Has anybody any ideas?

    Hi Derick,
    you need to make sure the following is met:
    1- router is correclt setup and antennas are plugged
    2- users are withint good range from the router
    3- use a good channel for the router, one of either 1, 6 or 11. try to figure out which is the best channel to choose using a freeware site survey tool.
    4- ssid configuration doesn´t involve eap and session timeouts.
    if you have doubts, let me know
    cheers
    Serge

  • Exchange 2007 - User's mailbox disappeared in EMC but they can still send and receive email

    We have a user that was complaining about not being in the address book anymore.  After I did a little rooting around in management console I noticed that their mailbox was no longer listed under Recipient Configuration -> Mailbox, but what's weirder
    is I can do a search and find her listed in the results - at which point I can right-click her name and do everything I normally can with no problem. Listing all of the mailboxes with PS shows her still there too.  As far as I know, she is the only user
    having this problem.
    She can send and receive email just fine, but like I said, she is no longer in the global address list so other users have trouble sending her stuff.  At her computer, I tried repairing her email (under account settings) but the process would fail when
    searching for her settings.  I don't know if this is a stupid thing to add, but I did run Clean-MailboxDatabase on our first storage group to see if her mailbox had been deleted or disconnected or whatnot but nothing is currently showing up in Recipient
    Configuration -> Disconnected Mailbox.
    Some info on our setup:
    Exchange 2007 on Windows Server 2003r2
    AD is on Windows Server 2008r2
    Her computer is running Outlook 2010
    I did restart our Exchange server 2 days ago to update VMWare tools, but no Windows updates were installed.  She couldn't tell me exactly when this problem started, but it was more-than-likely in the last couple of days as she was recently married and
    I had to change her name in AD and Exchange - so everything was confirmed 100% functioning 2-3 weeks ago.
    I'm at a lost for what the issue could be, but then again Exchange isn't exactly my forte, so any help would be much appreciated.

    First things first - is her mailbox hidden from address lists?  Run
    Get-Mailbox <alias> | Fl HiddenFromAddressListsEnabled to find out.  It probably isn't, but we need to clear this, just in case.
    Now, assuming it is not hidden, have you searched for both her maiden and married names in your directory?  Often, when the name on a mailbox is changed, the display name is not - and vice versa.  Also, has her email address also changed? 
    If so, has a secondary proxy address been added to reflect her maiden name?  I'd do this, just to be sure things aren't lost that should be delivered to her.
    I can't think of anything else obvious right now.  After you've checked these things, get back to us with their results.

  • I need send and receive emails for edge server 2010

    i have exchnage 2010 in our orgnization now working fine , i can send and receive emails for hub and also we have tmg and fortigate firewall(200B) , already install and configuration edge server(configure edge subscribtion file and edge sync) but still message
    sent form hub and also receive form hub , what to do to receive from edge ? please help me i have 3 month search to fix his problem.

    Hello,
    I recommend you use the Test-EdgeSynchronization cmdlet to check if the subscribed Edge Transport servers have a current and accurate synchronization status. If you have configured EdgeSynchronization successfully, please delete send connector
    on Hub transport server.
    Please uncheck "anonymous users" on receive connector for Hub server.
    Please follow the ExchangeITPro's suggestion to check DNS MX record.
    Cara Chen
    TechNet Community Support

  • I have the latest version of Thunderbird, my hyperlinks used to work fine now they don't work anymore I can send and receive email

    I am running version 24.4.0 I can send and receive email but when I get an email that has a hyperlink that I click on and go to. But we don't go anywhere, I tried running in the safe mode that that help, tried rebooting that didn't help. I have an earlier version on my laptop that works fine.

    https://support.mozilla.org/en-US/kb/Hyperlinks-in-Messages-Not-Working

  • How do I send and receive email with my @me email account

    I want to drop yahoo as my email provider, so how do I send and receive email using my @me account.  Using yahoo, you go to yahoo, then mail and your good to go. I'm not a tech expert and fairly new to apple products and would like the improved security of an apple address.

    Hi stephraerae,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Adding an email account
    http://support.apple.com/kb/ht4810
    iCloud is one of the options you can choose for your email provider.
    iCloud: Set up iCloud Mail on your devices
    http://support.apple.com/kb/PH2621
    This article includes the specific iCloud server settings:
    iCloud: Mail server information
    http://support.apple.com/kb/HT4864
    Hope that helps ...
    - Judy

  • Unable to send and receive email for external domain

    Hi,
    I just installed Exchange Server on my 2K8 domain controller. I have set up the send connector and made necessary changes to the receive connector as well. I have updated the DNS records as well on my domain registrar. I can access OWA from outside my companies
    network and is able to send and receive emails for my domain but unable to send or receive emails to any other domain. I have checked the delivery report and it says that the message has been queued on the server. 
    I also did nslookup. Results mentioned below:
    C:\Users\Administrator>nslookup www.google.com
    Server:  localhost
    Address:  ::1
    Non-authoritative answer:
    Name:    www.google.com
    Addresses:  2404:6800:4009:802::1014
              74.125.236.145
              74.125.236.148
              74.125.236.146
              74.125.236.144
              74.125.236.147
    C:\Users\Administrator>nslookup www.microsoft.com
    Server:  localhost
    Address:  ::1
    DNS request timed out.
        timeout was 2 seconds.
    DNS request timed out.
        timeout was 2 seconds.
    *** Request to localhost timed-out
    Any help would be much appreciated!

    Hi hg01,
    According to your description, I notice that you installed Exchange server on a DC.
    It is not recommended to install Exchange server on a DC. I suggest install Exchange server on a member server. More details to see:
    Installing Exchange on a domain controller is not recommended
    http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.warninginstallexchangerolesondomaincontroller(v=exchg.150).aspx
    About your issue, cannot send and receive externally, I suggest make sure the DNS can be resolved first.
    Then, check whether Outlook Anywhere has been enabled. If not, please enable it on both Exchange server and Outlook client side.
    Last, try to configure both Send Connector and Receive Connector.
    More detailed error message will be helpful for the further troubleshooting.
    Thanks

  • I'm unable to send and receive email through Apple Mail 4.  I've checked my settings on Preferences, and my password to Gmail is up to date for syncing with IMAP, but it still won't connect.  Suggestions?

    I'm unable to send and receive email through Apple Mail 4.  I've checked my settings on Preferences, and my password to Gmail is up to date for syncing with IMAP, but it still won't connect.  Suggestions?

    I think it's trying to open it in a gMail eMail & is losing your gMail password that it needs log into gMail, but not 100% positive.
    Have you tried Right clicking or Control+click on the eMail link & choose Copy? Works on some, not others.

  • Send and receive emails for iMessage and FaceTime

    Hi everyone! I'm in a tough situation. On iMessage and FaceTime, I want to use a different send and receive email but it says next to the one I type in
    Error: unable to verify email because it is already in use..... And it still has a check next to the email I don't want. Can someone plz reply
    Soon!! HELP      

    iOS: FaceTime is 'Unable to verify email because it is in use'

  • When use POP3 send and receive email, the outlook always popup a windows

    Hello guys,
    there is another question in Exchange 2013, when i tired to the send and receive email by using POP3, the outlook always popup a windows ,the error message is "ERR Logon Failure, Unknown user name or password ". I can fully confirm that the username
    and password is correct.
    The Exchange confguration as below,
    POP3 : 995  SSL
    SMTP : 587  TLS
    I'm very appreciate for guys help.
    Thanks
    David
    Exchange Lync Sharepoint

    Hi,
    How did you configure the POP3 account in the outlook?
    Please refer to the following article to configure it:
    Configuring POP3  Email  in Microsoft Outlook Using a Secure Connection (SSL)
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Why I cannot send and receive emails when I am in other countries other my original

    Why I cannot send and receive emails when I am in other countries other my original country ?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this: Delete the account in Mail and then set it up again.
     Cheers, Tom

  • HT4628 I am able to download updates and send and receive email so I know I have connection to my wireless router. However, when I click on Safari, I get the message "Safari quit unexpectedly." What is my problem and how do I solve?

    When I click on Safari, I get the message "Safari quit unexpectedly." I know I have access to my wireless net work because I just found and downloaded updates and can send and receive mail. What is my problem and hoe is it solved?

    As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
    Office for Mac forums

  • My send and receive email works fine over wi-fi in the US but when I am in Europe I can only receive emails. My iPad tells me that the emails i have typed have been sent (the whooshing sound) yet they are never received. Anyone have any ideas please?

    In the US, my iPad 2 sends and recieves email over wi-fi without problems, yet when I am in Europe, I can receive emails over wi-fi without issue, yet the emails that I send (get the whooshing sound) never arrive.
    I have input a valid local smtp address yet that still get no results.
    Has anyone had the same issue and found a workable solution please?

    Who is your email provider?
    If you use an independent email provider (not tied to any specific ISP) such as GMail or iCloud, you'll have no problems sending email from any location or network, without having to change any outgoing SMTP servers to local ones.

  • MS Outlook 2011 for Mac will no longer automatically send and receive email since upgrade to OS 10.9 Mavericks.  Does anyone know of a solution?

    I have been having trouble with Outlook 2011 for Mac since updating to OS 10.9 Marvericks.  I have tried updating the database and identity.  I can get email if a go to each account and try to download it.  But email will not come automatically and can I send and receive all accounts.  Does anyone have a solution?  I do not want to lose my email, contacts and information.

    I am also finding that searching in Mail for emails in this account is leading to false negative results. It's astonishing that I can search for an email I know is in the Inbox list yet not find it unless I scroll down to it manually and clicking it. Then it will show up in the results if I search again. I just did "rebuild" a day ago (have to do that every few days or so to get Outlook Exchange emails restored again anyway), so I doubt that this would fix the issue, but even if it did it's ridiculous... do I really have to abandon Mail and move to Microsoft Outlook on my mac to read my emails? Mail is currently FAILING to work for those of us who have to deal with Microsoft servers... which must be a huge # of customers, Apple.

Maybe you are looking for

  • IP connectivity bug in Snow Leopard confirmed

    In order to make sure there are no disruptions on my laptop, I have created a Location 'Home' on which I set both my Ethernet and Airport settings manually to the same information. In my setup order, I put Ethernet as the top interface, followed by A

  • Upload an excelfile to a table using BAPI method

    Hi, I would like to upload an excel file having three coulumns of data to a table using BAPI  methods. Anybody with a solution? Thanks in advance.

  • Wireless connection between D-Link WiFi router and Time capsule stopped working

    We have an ISP provided D-Link wireless router (DIR-615) to which we wirelessly connected our 2Tb Time Capsule for back up and to connect a USB printer to out network. This worked perfectly for 3 1/2 years, until about a month ago, when the time caps

  • Two licenses?

    I have two computers that I use. I have my mini and my Macbook Pro for when I am on the road. They both came with iLife. If I want to upgrade to the new version of iLife that is supposed to come out near the end of the year, I am supposed to buy two

  • How do I upgrade iPod from 4.3.5 to 5.0.1

    How do I upgrade iPod touch from 4.3.5 to 5.0.1