Sending E_mail from ECC 6.0:- Configuration settings required

Hi frnds,
I want to know the standard functionlaity to send mails through SAP .
I m using trsansaction f.62 . I want to send internal documents through mail from the ECC6.0 system
Can anyone please help me in the Configuration settings required for the above mentions situation.
eg:- To send a payment advice to a vendor to his personal E-mail account which is mentioned in his master data.
[Reward points will be given to the best answer]
Thanks in advance.
Regards,
khushboo

Goto SCOT transaction, double click on STMP you will find the option
Maximum waiting time for repeat send attempt procedure:
Hours/minutes / 30. define the time over there.
II option execute the job- start send process,
Regards,
Mahesh

Similar Messages

How to send email from OSB with Mail server that requires SSL or STARTTLS

Hi everyone.
My leader ask me configuration on OSB to support send email to my company mail server (using https chanel) and customer email (some of them is gmail that require STARTTLS or SSL).
I've configured OSB as tutorial in that link: http://blogs.oracle.com/christomkins/entry/sending_an_email_from_oracle_s
But OSB cannot send email from mail account that configured because it cannot login to mail server. I think the reason is secure authentication with SSL or TLS.
There some problems that similar to mine in this forum but has nobody solved it yet.
Can you tell me the solution you know? Any suggestion is appreciated.
Regards
Cuong Pham

I know I'll offer you just a workaround and not a real solution, but you can try to start your own (intermediate) SMTP server to communicate with OSB (without SSL). Then you can just relay all the messages to your "real" SMTP server which requires SSL. If you start your intermediate SMTP server on the OSB host (localhost), then this layout could be acceptable even from security point of view.

Problem when sending IDOC from ECC to MII 12.0

Hi all,
   I have followed the document "[How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50775783-6cb1-2b10-90b0-e6bc2c0b8563]" to configure the scenario to send IDOC from SAP ECC 6.0 to MII 12.0.
   But when sending 53 IDOCs by Tcode POIT to MII, I have problem as below:
   - 53 IDOCS were successfully outbounded (list in WE02).
   - 8 IDOCs were successfully sent to MII IDOC listener (these 8 IDOCs messages exist in list of Message Monitor).
   - 45 IDOCS were error with message in SM58: "Bean IDOC_INBOUND_ASYNCHRONOUS not found on host xxx, ProgId=yyy".
   I'm wonder why some IDOCs were successful while some others were error. If the bean IDOC_INBOUND_ASYNCHRONOUS don't exist in EJB, why some IDOCs successful found this bean?
   I have another wonder: in this scenario document, all IDOC message type (SYNCH, LOIPRO) is configured in outbound parameters of RECEIVER (receiver logical system), why they weren't configured them in outbound parameters of SENDER (sender logical system)?
   If some have the same problem and know how to resolve it, could you please help me?
Thank a lot in advance,
Vinh Vo

Hi Vinh,
Please read the following document:
[IDOC Listener|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/manufacturing/how%20to%20send%20an%20idoc%20from%20sap%20ecc%20to%20the%20sap%20mii%20idoc%20listener.pdf]
If you explicitly defined a Prog ID in NW, then you have done an extra step and are confusing NW with the real destination.
In basic terms, you set up an RFC destination (with an assigned ProgID) in ERP, then configure MII to point to it.
I suggest that you follow the document completely and do nothing else to set up a new listener.
If you are not using ECC 6.0, you may find the paths are different, but the transactions codes are generally the same. However, you may want to check with some of the older installation instructions regarding specific modifications. Look in the Wiki for MII under Connectivity.
Good luck,
Mike

RFC call from ECC to SCM -- Debug Steps required

Hello,
The steps being done for this issue is:-
1) In ECC system ,CN22 Transaction Code (Change Networks) --> Click on Schedule (at the Header) and click on SAVE
2) This seems to trigger an RFC call to SCM server (as per the trace log).
3) From SCM, it comes back to ECC server as User 'BATCHRFC'. This has been defined in SM59 correctly.
4) BATCHRFC in ECC system calls an RFC FM 'CIF_PJ_INBOUND' and changed the status of networks to DSEX (date set by External system)
We are trying to understand why is the RFC call being made? I can debug the FM in ECC when an external breakpoint is used.
However, I want to know where in ECC is the RFC call made (to SCM), and how? How can I control it as we do not want this to happen? How can I debug to understand how an RFC call is made?
Your views would be appreciated.
Regards,
Sanjiv

Hi,
What you do is, enter the Tcode, CN22, then in Command window activate debugger by entering /H
It takes u to debugger, from menu > utilities set a break point at Satetment Call Function, it will stop at all the Function modules in debugger, so you can look for the RFC FM in the program where it is called.
And also look for setting in debugger, may be u have some options for RFC FM.
Regards
Bala Krishna

Configurable products from ECC to CRM 2007

Hi ,
I understood from other posts that PME is now replaced by Product assignment block in the new Web GUI.
My question, is this applies to configurable products downloaded from ECC?, Any special settings needed?
I have a B2B scenario in Interaction center where in a sales order, diffrent variants of a product should be able to selected!
How does the pricing handled in this case? Can we still use ECC to maintain the pricing conditions?
Any info much appreciated.
Thanks in advance.

Hi Praveen,
If you model your confid products in ECC, create variants in ECC, and download it to CRM, you really don't need PME.
For Product Variants you can specify the Basic Data 2 tab to specify the Config Material name and configure the variant. Download these to CRM along with your KB.
In CRM Sales Order, when you go to the configuration screen and configure the product, you have a tab on right hand side called as Product Variants. You can choose the appropiate variant from that column and replace the original config product with this one.
Regarding Pricing, you can have the Pricing Conditions maintaines in ECC and downloaded to CRM. In case you are using variant pricing you can even download variant conditions to CRM.
Regards,
Kunal

Components required for sending Email from SAP [Kernel Release 46D]?

Hi All,
Can somebody please tell me the components and the Configuration settings required for sending Emails from SAP system[Kernel Release 46D] to the mail server[Win NT] using SMTP.
From note 455127, I understood that "Sap Internet Mail Gateway" is required and there are other settings to be done. (SAPconnect with RFC can only be used as the Kernel version is 46D)
It will be great if somebody can explain me in simple steps if He/She has done this before.
Thanks,
Varun

Varun,
sendmail comes with UNIX OS, there are versions of sendmail programs available for Windows too, but i guess you have to purchase them.
Another alternative is a discontinued product called SAP Exchange connector, if you have a Windows environment and MS Exchange server as your mail server, you could use a SAP exchange connector and get your SAP Email config done.
Regards,
Siddhesh

Sending IDoc from ERP to PI

Hi all,
I am trying to sent IDoc's from the ERP (SAP ECC) side to PI. But the IDocs are not arriving at the PI side. In ECC tc:we05 they seem to be successfully sent.
The Partner Type in we20 is "LI". I added the IDoc to the Outbound parameters and set the PORT to the Port we use for PI. But unfortunately it is not working.
Any idea why?

When sending IDoc from ECC System to PI.
some settings needed on ECC System & PI System
On ECC System
Create Port in WE21 type LS (Logical System) use RFC Destination TYPE ABAP in that port.
Create Partner Profile using PORT in WE20.
Add the Idoc as Outbound in that Partner Profile.
Now on PI System
PI System does not have structure / matadata of IDoc.
Create Port in IDX1.
Import IDoc Matadata in IDX2 use Port created in IDX1.
Create complete scenario & send IDoc from ECC, it will reach at PI System, if successful at ECC.

Send email from OWB with authenticated SMTP server (AUTH_LOGIN)

Hi all,
I want to send email from Oracle Warehouse Builder 11.2.0.2 using a SMTP server with basic authentication (AUTH_LOGIN).
I've created an ACL for OWBSYS user according to note ID 1229769.1 in support.oracle.com.
But, I need to configure again the ACL to connect to the SMTP server using user and password.
I read the article in metalink, *How to Send an Email Using SMTP over an SSL Connection [ID 1323140.1]*+
but I don't know how can I configure again the ACL for use in OWB.
How OWB is able to authenticate with the SMTP server?
Thanks!
Maximiliano.

Duplicate -
How to send email from OSB with Mail server that requires SSL or STARTTLS
Regards,
Anuj

PO via direct XML from ECC to SNC

Hi Guru's..
Can somebody help me to know how PO's can be send directly via XML message from ECC to SNC?
The requirement is we do not want to have output message / Idoc created in ECC to send the PO.
Thanks in advance!
Vipin

Hi Vipin,
Refer the below link
PO Delivery Tolerances to SNC
Regards,
Nikhil

Subcontracting configuration settings

Hi experts
Can anybody pls let me know the configuration settings required for subcontracting
Thanks

hi chekc following link
Subcontracting Process w/o Payment of Excise Duty
http://help.sap.com/bestpractices/BBLibrary/Documentation/J85_BPP_V2_EN_IN.doc
Subcontracting without Payment of Duty
u2022     Creation of Subcontracting PO (ME21N)
u2022     Transfer Posting of Components to Subcontractor (Mvmt Type - 541) (MB1B/ME2O/MIGO)
u2022     Creation of Subcontracting Challan w.r.t. Transfer Posting Doc (J1IF01)
u2022     Goods Receipt w.r.t. Subcontracting PO and Refer Subcontracting Challan at the time of GR (MIGO) {GR with 101 and auto consumption of components with 543 movement}
u2022     Reconciliation of Subcontracting Challan (J1IFQ)
u2022     Completion of Subcontracting Challan (J1IF13)
u2022     Generation of Annexure IV (J1IFR)
Master Data
u2022     MM01- Material Masters for Components and FG
u2022     XK01 - Vendor Master (Subcontractor)
u2022     CS01 - BOM for FG
u2022     ME11 - Purchase Info record for Subcontracting
Configuration: -
u2022     Go to SPRO > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify Excise Accounts per Excise Transaction >
maintain 57F7 entries here
u2022     And then go to SPRO > Logistics - General > Tax on Goods Movements > India > Account Determination > Specify G/L Accounts per Excise Transaction > Here do Account Determination for the above combination and Excise Group
Apart from above also do following configuration for Subcontracting;
u2022     SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Subcontracting Attributes
u2022     SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Subcontracting > Maintain Movement Type Groups
Here maintain following
MVT. Grp. MvT S
0001      101 O
0001      541 O
0002      542
0002      542 O
0002      543 O
u2022     J1I9 - maintain No range for object "J_1I57FC" for series group

I can not send messages from iPhone 5

I can not to send messanges from iPhone 5

Hi Go to settings Email Accounts Delete account then add back again. Do this with all Accounts that are not working. The last reply didn't want to help? Cheers Brian

Organization data from ECC to CRM

Hi Experts,
We need to download organization data from ECC to CRM, and our requirement is to download two different kinds of org structures, sales org structure and HR org structure. Could you please advise whether this is possible in the system and also if it is possible please advise how to download this.
Currently we are using ALE to download employees into CRM and transporting org structure in CRM systems from golden client.
Thanks&Regards,
Kumar.

Hi Kumar,
Please select the following parameters when downloading the HR Org from CRM:
You can do this in the program RHALEINI (or in the transaction PFAL, which has the same function)
Tx: SM30--> This scenario is activated in T77S0: ALE REPLI
Objects:
1. Plan Version: 01
2. Object Type: *
3. Object Id: Copy the Object Ids which you want to transfer from HR System
4. Object Status: *
Reproting Period: All
Structure Parmaters: Blank
Transfer Mode:
Insert: Complete distribution, this will delete the exisiting and recreate it in Target System
Update: this will update the change records in CRM system
Message Types: HRMD_ABA
Also check SAP Note: 119780
Hope this helps.
Regards,
Madde

Sending Email From a JSP Page

Hi All,
Can anybody tell me how to send email from the jsp page. My requirement is to send email to the user when he click on a button on the jsp page.
thanks and regards
MSoldier

You need to install an SMTP server, or access an existing one.
Contact your network administrator about this, he should be able to help you.
PLEASE don't go around installing your own mailservers on the internet unless you know very well what you're doing, as most of those are wide open to abuse by spammers and people spreading email virusses as relays (plus it's likely against company or ISP policy).
And NEVER use someone else's servers without their consent to send email.

Invoke background job in XI from ECC

Hi All,
I was wondering whether it is possible to invoke an ABAP program (on XI) from ECC via SM36? I require this job to be run as the last step in a sequence of 3 programs, with the first three residing on ECC. Look forward to your replies.
Kind regards,
James

hi rob ,
Tthank you for your reply ,
the transaction is pp01 ,To create objects and relationships
thanks
bharath

Settings required to send ROEMPROACT2 XML from ECC to SNC

Hi All,
Can anyone explain the config that will be required on ECC / PI / SNC to send ROEMPROACT2 XML from ECC side and recevie the PAN XML successfully on the SNC side.
I already went through this link : Using ROEMPROACT2 but couldnt understand.
Also what transaction to use to check if the XML has been sent out successfully from the ECC system (Like we use WE05 for the Idocs)
Thanks,
Bharath

Hi Bharath,
In ECC you need to maintained the PI logical system in transaction SXMB_ADMIN.
In PI you need to mapped XML mapping <ECCLogical_system>|ProductActivtyNotification_Out|<SNC_Logical_System>
In SNC you need to maintain ProductActivityNotification_In XML configuration(By default this setting will be there) if it is not maintained then:
Go to SPRO>Supply Network Collaboration>Basic Settings>Processing Inbound and Outbound Messages>Process Types for Inbound Messages-->Assign Inbound XML Messages to Default Process Types
XML Message=ProductActivityNotification_Inbound
Process type=Supplier Collaboration.
Go to transaction code SXMB_MONI or SXI_MONITOR to check XML message in ECC.
Regards,
Nikhil

Sending E_mail from ECC 6.0:- Configuration settings required

Similar Messages

Maybe you are looking for