Sending E-mail from iReceivables Page (Page Content)

Hi,
In the iReceivables page, we need to send the page content (Invoice, credit memo) as an email to the users.
Any inputs is highly appreciated.

There are only two ways to process form data -
1. Use mailto:[email protected] as the action of the form
2. Use a server-side scripting method to a) harvest the
form's data, b)
process it in some manner, e.g., enter it into a database, c)
formulate and
send an email to one or more email recipients, and d)
redirect the visitor
to some ending page
Method 1 is quite simple, and is also the least reliable. It
depends both
on your visitor having an email client already installed on
their computer -
this eliminates public computers, or home users without email
clients
installed (more and more it seems) - and on the installed
email client
responding to
the mailto call. It is not possible to use this method *and*
send the
visitor to a
thank you page as well. However, you *can* use this method
and add a
subject line to the email.
Method 2a is the preferred method, since it eliminates the
problems of
method
1, but it means that you have to grapple with
server-scripting somehow (ASP,
CF, PHP, perl, etc.).
Method 2b would be to use some third-party form processing,
like
http://www.bebosoft.com/products/formstogo/.
You would have to decide which of these methods is best for
your needs,
but if it's Method 2a, then start by asking your host what
they provide for
form
processing. If it's 2b, then read their FAQ/instructions
carefully.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"swifty00" <[email protected]> wrote in
message
news:fvt7dp$99u$[email protected]..
> Am new to dreamweaver etc, I want e-mails generated from
e-mail links on
> my
> site to have a subject line idenitfying their origin as
being from my
> site. Can
> dreamweaver do this, can someone tell me how??
>

Similar Messages

Sending E-mails from LR

In the instructions for sending e-mails from within LR it says: "In Windows Explorer or the Finder, create a shortcut or alias to your e-mail application".
How do I create a "alias to my e-mail application"?
Pleased be so kind as to let me have step-by-step instructions.
Thanks!

Richard:
Thank you for reply.
I have a problem which I did put in this Forum some time ago, but which could not be solved: when I right click a preset (as you suggested) or click on "Export" and then select "Go to Export Actions Now" in both cases Internet Explorer opens saying "Page can not be opened"
Given this problem I now have done the following:
I copied the e-mail short-cut on my desk top and placed this in the Export Actions folder (in C:/Document and settings >Application Data >Adobe >Lightromm >Export Actions).
Is this correct?

My 3GS will not send e-mails from yahoo. Keeps saying the username or password is invalid. How can I fix this?

Any idea how I get fix my iphone so it will send e-mails from yahoo? It keeps saying username or password invalid. I can receive e-mails without any problem. I have tried deleting the account and reinstalling it, chek the username and password and they are correct. Went under outgoing server but it is grayed out and won't allow me to edit and add the optional username or password or anything in that section. Please help.

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

How to send formatted mail from form 6i

Hi,
There is requirment in my project to send formatted mail from form 6i.The database used in 9i.In normal form we can send normal mail.However our requirment is such that the mail content should have company logao pics and it should display data in coloured format based on data fetched from database.How can this be done.
l

What method are you using to send email from your form now? If you are using UTL_SMTP, you can set the MIME_TYPE = 'HTML' as Francois suggests. If you are using an OLE call to Outlook or a email JavaBean? The method you use to send email will dictate how you send Rich Text/HTML email messages.
Craig...

E72- Unable to send e-mail from work mailbox

I am unable to send e-mails from my work e-mail through my E72 although it receives perfectly. I have been in contact with Nokia via e-mail for the last 2 weeks and they have sent several suggestions to solve the issue but nothing is working. I have set-up my work e-mail on my husbands Blackberry with the same settings and can receive and send perfectly. From that I conclude there is no issue with the settings I have or my work e-mail but with
Nokia!! The latest 'help' I have received was to download a patch but I have no idea how to do this and get it onto my phone. So far Nokia have not replied to me.
Any suggestions how to get this to work would be greatly appreciated

If you're using a much older firmware, updating the phone would be a good idea. Find the Software Updates section of nokia.com and type your phone model. If you can't do an over-the-air update, download and install either the OVI Suite or the standalone Software Updater. This may hard reset the phone, so back up anything important with OVI Suite first.
Ignoring firmware for now, IMAP and URL's are like apples and oranges. If you work for a small company, the server may always be called " mail.mycompany.com", but IMAP will never use an HTTP or HTTPS prefix. URL's are typically associated with Microsoft Exchange servers. Within the email program, check Options -> Settings -> Mailbox settings -> Mailbox settings -> Advanced mailbox settings. Are "Outgoing email settings" set to something like
User authentication: Same as for incoming
Outgoing mail server: <compare to the setting for the Incoming server name; in a small company this will likely be the same>
Since you're getting far enough for the mail sever to reject your connection, the other settings should be fine as-is.
It does look like an authentication issue, so I'd say you're either hitting the wrong server or there's a bad username or password in there somewhere. If the Blackberry works with an IMAP connection, then you should be using the same server name(s), and user/password.
If all else fails, you can always try removing and readding the mailbox completely. Choose Menu -> Applications -> Email -> Settings -> <highlight your work account> -> Options -> Remove mailbox. And then set it up from scratch. I hope that helps a little!

Why can I not send e-mails from my e-mail account? I can receive e-mails. Not an iCloud account. It is a Bell Aliant account.

Why can I not send e-mails from my e-mail account? I can receive e-mails. It is not an iCloud account it is a Bell Aliant account. An account I pay for.
This is the second time in three months this has occurred. Bell Aliant suggested I contact Apple directly as the only option is to remove my e-mail account and reconfigure it. This will mean losing all my files. These files are very important as my account is a business account.
Bell Aliant thought perhaps it is an Apple problem and that Apple may better be able to remedy the situation without me losing my e-mail files.

Sorry ?
An Internet email provider losses all your Mail and it's Apple's fault ??
Did they explain how the app managed to delete all of your mail and then not even let you have access ?
If that was the case the app should still be able to access the empty folders.
I know there is often blame and counter blame in these situations but there are limits.
9:50 pm Friday; April 10, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Can not send e-mails from account but can receive

I have my e-mail account with ATT Yahoo.
I received an account verification notice yesterday from ATT and I responded and they said I was verified.
However after I did that I could not send e-mails from my Imac desktop but I am receiving them.
I spend 4 and a half hours, yes 41/2 hours with both Apple Care and ATT and they could not correct the problem. Both discussions were with upper tier support personnel.
Here are some facts that make this an odd issue:
(1)
I have other e-mail boxes from ATT and they can send and receive e-mails.
(2)
MY laptop can still send and receive e-mails from the e-mail account that is only receiving with my Imac.
(3)
All the settings are exactly the same and both Apple Care and ATT checked them.
Is there anybody out there that may have an answer ?
Both Apple Care and ATT blamed each other.
My concern is that today I received another e-mail trying to verify my e-mail address for another e-mail address from ATT.
I called ATT and they did not know why, I DID NOT open it up and trashed it.
ATT has put a filter on my other e-mail accounts and hopefully that will end any problems with them.
The account that has the issue is my main account and I cannot trust leaving it and am trying to avoid having to change it.
Greg

Hi Rachel, For what it will be worth, I was like a dog with a bone about this, so I decided to give it another go. I have success on both boxes. Here is what I did, I warn you now it was a lengthy process. Before you begin download all the upgrade steps from X.5.0 to X.5.6 as single stages ( for me the combo's did not work) and have them ready to use.
1st Backup all your mail to CD/DVD not on the box. Check for any unsent mails anywhere in the box and then throw out all of the mail bits that are anywhere on the system in any folder. 2nd Install & Archive, 3rd Start up from Install DVD and check/set permissions, reboot. Enter all your ISP details to mail, see if you can send a mail to yourself. If not dump all the mail you tried and the .plists, reboot and install next update in the series, enter all details as before, try and send etc. If this fails dump again and reboot install next update etc.
I started at X.5.1 and got to vX.5.4 before I got a result in that sys asked me if this server will do, I said yes and I got mail out. The server name was different that was offered but when all was over it showed as the correct one that it should be on port 995. I must add that I had the spinning cog wheel for quite some minutes before anything happened. I continued on this way for the rest of the updates. 1x1 until v.6 was reached. That was only on the G4, I now had to do it all again on the MacPro. This one was not so co-operative in that I had to do it twice, but now it also has Mail running. It is funny though that I had to reach X.5.4 on both machines before it came right. On the G4 I was using a retail disc and on the Intel the supplied for discs.
Others on here may have a better and quicker way, but for me this did work. I am sure that there is a problem in either the mail app itself or the production of the Master DVD's.
Whatever, good luck.

Sending a mail from oracle database

Hi,
I have a requirement to send a mail from oracle database.I use UTL_TCP package for this.Although my procedure is executed successfully,i dont get the mails in my inbox.Please help me to figure out a solution.
Thanks in advance....

Hi, you must use UTL_SMTP package for send emails, it has more performance and features for debug. You must look the next code, this is a example for send emails.
DECLARE
c UTL_SMTP.CONNECTION;
PROCEDURE send_header(name IN VARCHAR2, header IN VARCHAR2) AS
BEGIN
UTL_SMTP.WRITE_DATA(c, name || ': ' || header || UTL_TCP.CRLF);
END;
BEGIN
c := UTL_SMTP.OPEN_CONNECTION('smtp-server.acme.com');
UTL_SMTP.HELO(c, 'foo.com');
UTL_SMTP.MAIL(c, '[email protected]');
UTL_SMTP.RCPT(c, '[email protected]');
UTL_SMTP.OPEN_DATA(c);
send_header('From', '"Sender" <[email protected]>');
send_header('To', '"Recipient" <[email protected]>');
send_header('Subject', 'Hello');
UTL_SMTP.WRITE_DATA(c, UTL_TCP.CRLF || 'Hello, world!');
UTL_SMTP.CLOSE_DATA(c);
UTL_SMTP.QUIT(c);
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
BEGIN
UTL_SMTP.QUIT(c);
EXCEPTION
WHEN UTL_SMTP.TRANSIENT_ERROR OR UTL_SMTP.PERMANENT_ERROR THEN
NULL; -- When the SMTP server is down or unavailable, we don't have
-- a connection to the server. The QUIT call will raise an
-- exception that we can ignore.
END;
raise_application_error(-20000,
'Failed to send mail due to the following error: ' || sqlerrm);
END;
Also review the next link for get more information about the UTL_SMTP packege.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_smtp.htm#sthref15587
Regards.

How do I set up my 3G to send/receive mail from MS exchange?

How do I set up my 3G to send/receive mail from MS exchange?

Welcome to the Apple Community.
If you can't get your mail to work on Snow Leopard after June 30, you might want to try one of these approaches
1. Configuring Mail in Snow Leopard
2. Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
Entering iCloud email settings manually in Snow Leopard or Leopard

Why am I unable to send e mails from my IPhone or IPad and get message rejected from outgoing server, message placed in outbox

Why am I unable to send e mails from my iPhone, and get message rejected by server and message put in outbox. I have tried changing server ports but to no avail. I am not very technically minded so any suggestions in laymans terms please. This is a big problem as I work away frequently and need to answer e mails. This also happens when at home and on my own wifi.

Hey Pam3008
The article below will give some troubleshooting steps to resolve Mail issues.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How to Send a Mail From the Oracle Applications.

Hi,
I was assigned a task to send a mail from the front end i.e., from oracle applications.
but i have no idea.
i am working on oracle apps R12.1.1 and 10g reports.
First i have to create an rdf file and that rdf file i want to send as an attachment through mail from the apps.
Any Advice will be of great help and i will follow accordingly.
Thanks in Advance,
Regards,
Bharathi.S

Hi,
I was assigned a task to send a mail from the front end i.e., from oracle applications.
but i have no idea.
i am working on oracle apps R12.1.1 and 10g reports.
First i have to create an rdf file and that rdf file i want to send as an attachment through mail from the apps.
Any Advice will be of great help and i will follow accordingly.
Thanks in Advance,
Regards,
Bharathi.S

When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files. Even if I perform a "save as" to the correct file name the file format is still not recognized. Why is this happening!?

When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files. Even if I perform a "save as" to the correct file name the file format is still not recognized. Why is this happening!?

http://www.joshjacob.com/mac-development/tnef.php

When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does nog display my name or e mail address. This only since upgrading my iPhone5 to iOS7

When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does not display my name or e mail address. This only since upgrading my iPhone5 to iOS7. I've checked all settings etc. anyone have a solution please?

Rectory wrote:
Please can someone tell me how I can change this so when I send a mail from my phone and from the IPad that it reads from me.
You need a separate email address but you've already ruled out that solution.

Send a mail from report 6i with his function "mail...."

I have tried to send a mail from report using "File" ---> "Mail.." Function that is avaible on report, but it send a file "*.eps" that is not readble with the normal reader.....
It is possible to send a PDF file ???
Thank 's .....
il vampiro

Hello Mike,
In Reports Builder 6i, Just change the Initial Value of the DESFORMAT System Parameter in the Object Navigator (under Data Model) to PDF, or any other format you want to mail the report in.
Thanks,
The Oracle Reports Team.

Sample code to send a mail from SAP

Hi guys
could any one provide me with the
sample code to send a mail from SAP with text as the main body of that mail via bcs classes

Hi,
     Please go through this code: U can send mail;
Tables : zchp_cust-info.
DATA: OBJCONT LIKE SOLISTI1 OCCURS 5 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: ENTRIES LIKE SY-TABIX.
DATA: NAME(15).
DATA: CON_NAME(20).
DATA: req_num like zchp_cust_info.
DATA: I_TAB_CHP LIKE ZCHP_CUST_INFO OCCURS 0 WITH HEADER LINE.
*data: reno like ZCHP_CUST_INFO-req_num value .
data input for the mail
select * from zchp_cust_info
appending table i_tab_chp where req_num = c_knumv.
LOOP AT I_TAB_CHP.
concatenate i_tab_chp-created_by i_tab_chp-req_num into CON_NAME.
*WRITE: / con_name.
ENDLOOP.
Fill the document
DOC_CHNG-OBJ_NAME = 'Refe'.
DOC_CHNG-OBJ_DESCR = 'TESCRA Ref Number !'.
DOC_CHNG-SENSITIVTY = 'P'.
*OBJCONT = 'Tescra'.
OBJCONT = CON_NAME.
APPEND OBJCONT.
OBJCONT = con_name.
APPEND OBJCONT.
DESCRIBE TABLE OBJCONT LINES ENTRIES.
READ TABLE OBJCONT INDEX ENTRIES.
DOC_CHNG-DOC_SIZE = ( ENTRIES - 1 ) * 255 + STRLEN( OBJCONT ).
Fill the receiver list
CLEAR RECLIST.
RECLIST-RECEIVER = SY-UNAME. " replace with <login name>
RECLIST-REC_TYPE = 'B'.
RECLIST-EXPRESS = 'X'.
APPEND RECLIST.
CLEAR RECLIST.
RECLIST-RECEIVER = 'sapuser'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
Send the document
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_TYPE = 'RAW'
          DOCUMENT_DATA = DOC_CHNG
          PUT_IN_OUTBOX = 'X'
     TABLES
          OBJECT_CONTENT = OBJCONT
          RECEIVERS      = RECLIST
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
               DOCUMENT_NOT_SENT          = 2
              OPERATION_NO_AUTHORIZATION = 4
               OTHERS                     = 99.
    CASE SY-SUBRC.
      WHEN 0.
        LOOP AT RECLIST.
          IF RECLIST-RECEIVER = SPACE.
            NAME = RECLIST-REC_ID.
          ELSE.
            NAME = RECLIST-RECEIVER.
          ENDIF.
          IF RECLIST-RETRN_CODE = 0.
            WRITE: / NAME, ': succesfully sent'.
          ELSE.
            WRITE: / NAME, ': error occured'.
          ENDIF.
        ENDLOOP.
      WHEN 1.
        WRITE: / 'Too many receivers specified !'.
      WHEN 2.
        WRITE: / 'No receiver got the document !'.
      WHEN 4.
        WRITE: / 'Missing send authority !'.
      WHEN OTHERS.
        WRITE: / 'Unexpected error occurred !'.
    ENDCASE.
<b>Please provide points if the issue is solved.</b>
Regards,
Sunil

Sending E-mail from iReceivables Page (Page Content)

Similar Messages

Maybe you are looking for