Sending e-mails between different SAP-Systems with SMTP

Hello,
I want to send e-mails between two different internal SAP-Systems. I already configured SMTP in both systems but ist not possible to send an e-mail from system A to system B. I've got following error message:
Cannot process message; no node determined for <sapuser>:
Thanks in advance & best regards,
Christoph

Hi Christoph,
but it is possible that the email for user from System B is also available in the system itself(transaction so01) and not only in his outlook inbox?
As the email is sent from System A. It will be available under SOST of system A.
As user in System B is receiving the email, it will be appearing in users inbox.
Check with Mail server administrator on where to enable SMTP relaying for IP address of SAP server.
Hope this helps.
Regards,
Deepak Kori

Similar Messages

RFC connection between two SAP systems (with SAP router)

Hi!
I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
The network connection between the servers is VPN.
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
my server --> customer
my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
Back-way
SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
something like:
/H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
Thank you very much!
regards
Thom

Same answer as in the other forum where you cross posted....

DB Copy (MSSQL) between two SAP systems with different level and Components

Hi,
we have a SAP system release mysap 2004 SR1 and for "the upgrade project to SAP ECC 6.0 " we installed a new mysap 2004 in a new hardware (sap03) where we have also solution manager running. The new installed Mysap 2004 SR1 is alos running fine in the new hardware.
Now we would like to do DB copy from the old system (sap02) to the the new system sap03 and then we will do the upgrade to SAP ECC 6.0.
After I compared the two systems I have following questions:
1) there are 4 Software Components which are not in the new system (sap03). This are:
PI
FIN_BLERP
BP_INSTRASS
Is this necesary for the DB copy or we do not need this to be able to do the DB copy?
2) The Software Components Level is not the same. Should we have the same level to do the DB Copy?
Thanks in advance
Best regards
HanseAtik

Hi Juan, hi Clas,
just to be clear and to not stuck on the the way:
The systems are as follow:
1) the source system:
                     - Windows Server 2003,
                     - MSSQL Server 2005 with 32 bit.
                     - Mysap 2004 SR1
2) Target system:
                   - Windows Server 2003
                   - MSSQL Server 2005, with 64 bit.
                   - Mysap 2004 SR1 (with less Support package level and no PI, FIN_Basis, BP_BLERP and BP_INTASS coponents)
I hope this will work. could you post the link the DB Copy guide we are talking about?
By this way we will be sure that we are talking about the same DB Copy. Otherwise any mistake in this step will cost more work and time.
Thanks in advance
Best regards
HanseAtik

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Sending mail from one Sap system to another

Hi all,
plz explain me how can i send mail from one SAP system to other SAP system.
Thanks in advance
Venkat

Hai Venkat
Go through the following Code
DATA: OBJPACK   LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD   LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST   LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA L_NUM(3).
Creation of the document to be sent
File Name
DOC_CHNG-OBJ_NAME = 'SENDFILE'.
Mail Subject
DOC_CHNG-OBJ_DESCR = 'Delivered Mail'.
Mail Contents
OBJTXT = 'Object text'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creation of the document attachment
LOOP AT ITAB_DATA.
    CONCATENATE ITAB_DATA-PRODUCTOR
                ITAB_DATA-VBELN
                ITAB_DATA-POSNR
                ITAB_DATA-MATNR INTO OBJBIN.
    APPEND OBJBIN.
ENDLOOP.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'ORDERS'.
APPEND OBJHEAD.
Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM   = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM   = TAB_LINES.
OBJPACK-DOC_TYPE   = 'TXT'.
OBJPACK-OBJ_NAME   = 'WEBSITE'.
OBJPACK-OBJ_DESCR = 'ORDERS.TXT'.
OBJPACK-DOC_SIZE   = TAB_LINES * 255.
APPEND OBJPACK.
Completing the recipient list
target recipent
clear RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-EXPRESS = 'X'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
copy recipents
clear RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-EXPRESS = 'X'.
RECLIST-REC_TYPE = 'U'.
RECLIST-COPY     = 'X'.
APPEND RECLIST.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = DOC_CHNG
       TABLES
            PACKING_LIST               = OBJPACK
            OBJECT_HEADER              = OBJHEAD
            CONTENTS_BIN               = OBJBIN
            CONTENTS_TXT               = OBJTXT
            RECEIVERS                  = RECLIST
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            OPERATION_NO_AUTHORIZATION = 4
            OTHERS                     = 99.
Thanks & regards
Sreenivasulu P

2 Different SAP systems one with only WM and other no WM system

Hi All,
We are having trouble to implement 2 different SAP systems. In one SAP system only MM & IM will be there. The other SAP system only WM system will be there.
In the SAP system with only MM / IM system all the materials will be valuated where as the SAP system with only WM system, there won't be any valuations. It just serves as a 3PL warehouse for the first SAP system which has only IM environment. Both are acting as a different companies.
We planned to interface all the PO, Inbound Deliveries and also the Sales order and deliveries to WM SAP system and develop a custom program to do PGR / PGI in WM system and then transmit the PGR / PGI details to the SAP system (which has only MM / IM environment). The WM system also uses the RF guns. But not so sure whether this can help.
Can you please help me how to configure the WM system. I will be very grateful for your help.
Regards,
Vansh

Hello,
there is a standard SAP solution: [Decentralized Warehouse Management (LE-IDW) |http://help.sap.com/saphelp_erp60_sp/helpdata/en/51/803c35975f0054e10000009b38f839/content.htm]
for your scenario.
Andrzej

Is it possible to install two SAP system with same SID but different instance numbers on one host?

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
If yes, then how?
If no, then why?
Thanks in advance.
Regards,
Sarim

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
Yes, it is possible. If one is CI (PAS) and the second one is an AS (AAS). In this case there will be only one database.
If you are talking about two separate SAP systems with separate databases (Eg: A BI and an ECC) with the same SID then the problem will be with the database (Eg: Oracle)
The database will be installed under /oracle/SID/112_64 (ORACLE_HOME) unless one database is running on 10 G and in that case the ORACLE_HOME will be /oracle/SID/102_64
The next issue will be with the SAP file systems like /sapmnt/SID
The most important problem will be with the switch to the sidadm and orasid users and the conflicts there. If there is a need to stop one of the SAP systems and if you do a switch to sidadm and issue a stopsap command which system will be stopped ?
These are few of the many problems I can think of.
So if we are talking about two separate systems with their own databases I would rule out the possibility of having two systems with the same SID.
Regards
RB

When sending e mails, w attch the system stalls out just "spinning, not attaching, does not happen with exploere

When attempting to send e-mails w/ attacments, the systems stalls out, just keeps spinning, problem does not occur with exporer.
Also when trying to attch pics, same thing

No need to be inhappy.
iPhoto Menu -> Preferences -> Accounts ->
Delete and recreate your email settings.
Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.
There's no need to go through that exporting routine. Your iPhoto Library is available in every app. See this for more:
For help accessing your photos in iPhoto see this user tip:
https://discussions.apple.com/docs/DOC-4491

Connection between 2 SAP system

Hi.
I want to send and receive an IDoc between two SAP system. but i can't connected to an other syestem. i try it juste between two different mandant.
Can some one help me.
Thinks.
Issam

Hi,
Through RFC (SM59) u can connect the TWO SAP systems.........
If u are in SAP 4.7 , once u enter into SM59 u will be finding the R/3 Connections... U have to choose that...
if u are in SAP ECC , then u will be finding the ABAP connections.. U need to choose that and create the RFC connection.....
But U need to know the details :
1. Target Host Name .
2. System Number.
3. Logon details...
Reward Points if useful
Raghunath.S
9986076729

How to execute one sap gui script in different SAP system component versions.

Hi Experts,
I am having a task to write a script which can be executed in different SAP systems , explained as below.
I have created a script to do password reset for mass users in one system (TC6) & it's working fine. But when i load same script in other system(QR5) to do the same activity , the system unable to execute the same script.
One thing i found that by comparing in the two systems that the screen-ids in QR5 system is different than TC6 system.
My question
1-> why it is different even though the scripting language is same.
2-> How can i overcome it & make a common script for all the systems.
Please help me to resolve this.
Thanks in Advance,
Khagendra

Hi Holger & Stefan,
Sorry for late response first.
Now i have attached the recorded program-me for two systems for SU01 (simple user maintenance) with highlighted the text. I have highlighted both for easy understanding .
In system QR5 (upgraded one)
session.findById("wnd[0]").maximize
session.findById("wnd[0]/tbar[0]/okcd").text = "/nsu01"
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/ctxtSUID_ST_BNAME-BNAME").text = "test"
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/tbar[1]/btn[18]").press
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_PERSON_NAME-NAME_LAST").text = "rest"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_PERSON_NAME-NAME_LAST").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_PERSON_NAME-NAME_LAST").caretPosition = 4
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_PERSON_NAME-NAME_FIRST").text = "user"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_PERSON_NAME-NAME_FIRST").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_PERSON_NAME-NAME_FIRST").caretPosition = 4
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_COMM_DATA-SMTP_ADDR").text = "[email protected]"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_COMM_DATA-SMTP_ADDR").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSUID_MAINTENANCE:1900/txtSUID_ST_NODE_COMM_DATA-SMTP_ADDR").caretPosition = 21
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO").select
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUID_MAINTENANCE:1101/cmbSUID_ST_NODE_LOGONDATA-USTYP").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUID_MAINTENANCE:1101/cmbSUID_ST_NODE_LOGONDATA-USTYP").key = "A"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUID_MAINTENANCE:1101/pwdSUID_ST_NODE_PASSWORD_EXT-PASSWORD").text = "********"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUID_MAINTENANCE:1101/pwdSUID_ST_NODE_PASSWORD_EXT-PASSWORD2").text = "********"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUID_MAINTENANCE:1101/pwdSUID_ST_NODE_PASSWORD_EXT-PASSWORD2").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUID_MAINTENANCE:1101/pwdSUID_ST_NODE_PASSWORD_EXT-PASSWORD2").caretPosition = 9
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG").select
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG/ssubMAINAREA:SAPLSUID_MAINTENANCE:1106/cntlG_ROLES_CONTAINER/shellcont/shell").modifyCell 0,"AGR_NAME","Z:T5_UK_WIPRO_DEV_NONBASIS"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG/ssubMAINAREA:SAPLSUID_MAINTENANCE:1106/cntlG_ROLES_CONTAINER/shellcont/shell").currentCellColumn = "AGR_NAME"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG/ssubMAINAREA:SAPLSUID_MAINTENANCE:1106/cntlG_ROLES_CONTAINER/shellcont/shell").pressEnter
session.findById("wnd[0]").sendVKey 11
In system DR0 (Not upgraded)
session.findById("wnd[0]").maximize
session.findById("wnd[0]/tbar[0]/okcd").text = "/nsu01"
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/ctxtUSR02-BNAME").text = "test"
session.findById("wnd[0]/usr/ctxtUSR02-BNAME").caretPosition = 4
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/tbar[1]/btn[18]").press
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtADDR3_DATA-NAME_LAST").text = "test"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtADDR3_DATA-NAME_LAST").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtADDR3_DATA-NAME_LAST").caretPosition = 4
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtADDR3_DATA-NAME_FIRST").text = "user"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtADDR3_DATA-NAME_FIRST").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtADDR3_DATA-NAME_FIRST").caretPosition = 4
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtSZA5_D0700-SMTP_ADDR").text = "[email protected]"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtSZA5_D0700-SMTP_ADDR").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpADDR/ssubMAINAREA:SAPLSZA5:0900/txtSZA5_D0700-SMTP_ADDR").caretPosition = 21
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO").select
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUU5:0101/cmbUSLOGOND-USTYP").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUU5:0101/cmbUSLOGOND-USTYP").key = "A"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUU5:0101/pwdG_PASSWORD1").text = "********"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUU5:0101/pwdG_PASSWORD2").text = "********"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUU5:0101/pwdG_PASSWORD2").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpLOGO/ssubMAINAREA:SAPLSUU5:0101/pwdG_PASSWORD2").caretPosition = 9
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG").select
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG/ssubMAINAREA:SAPLSUU5:0106/tblSAPLSUU5TC_AGR/ctxtUSAGR-AGR_NAME[1,5]").text = "Z:T5_UK_WIPRO_DEV_NONBASIS"
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG/ssubMAINAREA:SAPLSUU5:0106/tblSAPLSUU5TC_AGR/ctxtUSAGR-AGR_NAME[1,5]").setFocus
session.findById("wnd[0]/usr/tabsTABSTRIP1/tabpACTG/ssubMAINAREA:SAPLSUU5:0106/tblSAPLSUU5TC_AGR/ctxtUSAGR-AGR_NAME[1,5]").caretPosition = 26
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]").sendVKey 11
From the above it's clear that the screen IDs in both the systems are different as the program-me name is different for the same TA (SU01) in both the systems.
Now can you please advise how i will go with both to handle in one script (I can't put a check condition to call different scripts for the specific systems as in my landscape there are more that 100 systems).
Please help me on this.
Thanks in Advance,
Khagendra

Locations of server host name in different SAP system files

Hello,
We are implementing SAP ECC 6.0, with i5/OS V5R4 on IBM System i.
Could someone please guide me on the locations where the server host name exists in the different SAP system files.
We need to change this server host name, and the reason is that we succeeded lately in installing SAP on a new server using restore from entire system backup done on an old server where SAP is already installed, but we can't connect the new server to the LAN as the old server is still connected to it, and we can't have the same host name in the same LAN, even with two different IP addresses.
Thank you in advance for your cooperation.
Best regards.
Reda Khalifa

Hi Reda
If the Host name is not the same..you may have to change in the startup/Instance/Default profiles, the new hostname...i.e..replace all the old hostnames with the new hostname....
Also ..you have to check the Data area R3_<NN> in R3<SID>400 library and check to make sure the hostnames correspond to the new hostname...
Then delete all the sql packages before you restart the system.
Hope that helps
Thanks
Abhi

How to send IDocs from a non-SAP system to a SAP system

Hi everyone i am new to SAP R/3 System.
Currently i am required to send IDocs from a non-SAP system to a SAP R/3 System.
There is a guide on Cost-Effective and Quick Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface. But its from a SAP system to a non-SAP system and i am able to do that.
Is there any step by step guide where they teaches you how to send IDocs from a non-SAP system to SAP system via similar method?
Thank You!

Hi,
I hope this link may help you......
http://publib.boulder.ibm.com/infocenter/iisinfsv/v8r1/index.jsp?topic=/com.ibm.swg.im.iis.ds.entpak.sapr3.use.doc/topics/c_pack_r3_Introduction.html

Integrating SAP System with Third Party Software

Hi,
I am working on an implementation project and need to integrate SAP system with a third party system. SInce I am a functional consultant, I am finding it tough to understand the integration issues. Can somebody explain me how to link up the two systems and what are the various tools available for this ?
Regards,
Rohit

Hi,
Inorder to integrate various systems we have various interface methodologies provided by SAP.
SAP systems use the following interface technologies:
ALE: Application Link Enabling
BAPI: Business Application Programming Interface
CPI-C: Common Program Interface Communication
EDI: Electronic Data Interchange
HTTP: HyperText Transfer Protocol
LU 6.2: Logical Unit Type 6.2
RFC: Remote Function Call
OLE: Object Linking and Embedding
SMTP: Simple Mail Transfer Protocol
SOAP: Simple Object Access Protocol
TCP/IP: Transmission Control Protocol / Internet Protocol
XML: Extensible Markup Language
In general we use ALEs and BAPIs.
The ALE uses IDOCs as the data transfer medium and need various middle ware systems inorder to receive and process these IDOCs.
BAPIs use Remote enabled functions which can be accessed from any platform also using any language ( like JAVA, VB etc).
Thanks and regards.

Installing SAP system with MSCS

Hi,
Anyone can give me the steps for installing a SAP system with MS cluster?
Window server 2003, MS. SQL 2005, SAP ECC6.0
Regards
Chin

Hi,
Refer SAP Installation guide in http://service.sap.com/instguides
I will give an overview about the installation process.
Basic setup of MSCS 5.2 for SAP involves 2 systems, we will name it as node A(First MSCS node) and B(Additional MSCS node)
3 Cluster groups should be created for SAP, Database, Quorum
MSCS should be configured between node A and B, test the cluster by moving the groups between node A and B. Its very important to note that, Quorum disk group should not be taken offline. If its goes offline there are chances of cluster getting crashed.
Steps to be followed for SAP Cluster Installation
     In Cluster Admin, move the disk groups and shared disks to first MSCS node.
     On the first MSCS node, install the MS SQL Server 2005 64-Bit
             In Cluster Admin, move the disk groups and shared disks to Additional MSCS node.
     On the Additional MSCS node, install the MS SQL Server 2005 64-Bit
     In Cluster Admin, move the disk groups and shared disks to first MSCS node.
     Install the Central Services Instance for ABAP (ASCS) on first MSCS node.
     Install the Central Services Instance for Java (SCS) on first MSCS node.
     Cluster the First MSCS node
     Install the Database Instance on the First MSCS node
     Cluster the Additional MSCS node
     Install Enqueue Replication Server for ABAP and Java(Optional)
     Install the Central Instance
     Install at least one Dialog Instance
Before starting the installation, make sure that system logged on as Cluster Administrator.
Hope it helps
Regards
KT

Trouble in a SAP system with load balancing

Hello masters:
I had a trouble with workitems that came from a SAP system with load balancing. They doesn't receive the workitem ID in the UWL.
I created another system in the portal as a "dedicated application server", and made the necessary configuration in order to replace the first one, and then my workitems worked fine.
However, I would like to know what appened with the first system created as "system with load balancing". Why this system didn´t pass the workitem ID to the application (web dynpro abap) that execute the workitems?
Thank you.

I hope there was some missing configuration in the first case which was not replicating the workitem from SAP Inbox to UWL.
Thanks
Arghadip

Sending e-mails between different SAP-Systems with SMTP

Similar Messages

Maybe you are looking for