Sending Email from Script

I am trying to send an email from a script when no agents are logged in. I think I have everything configured correctly but each time I test the script I on the send email step it times out and goes to the unsuccessful branch (so obviously I am not doing something right). I have tested via telnet that the email server is answering.
In my script I have 2 steps set up under the true branch of no agents logged in:
emailContact set is set with the subject "test", the body is set with "testing 1 2", and the emailContact is set with a variable named emailContact which is set as a contact and set to null.
the second step set is the sendeMail step and it is set with eMailContact set with varialbe emailContact, From is set with "shawnee" and to is set with my email address.
Am I missing or setting up one of those steps wrong?
thanks for your help!!

try from as an actual email address, not just a name.
If its not fixed by tonight when I get home, load up your script and take a look.
Glad I was able to fix part of your issue
HTH, rate if helpful
Chad

Similar Messages

TS3276 I need feedback for the following issue. When I send email from this 27 inch iMac, the computer adds a string of characters in vertical column that represents the QWERTY key board, all alpha numeric characters are included. Yahoo mail, issue only o

Restating my issue / question...
When I send email from this iMac, there is a string of characters assigned. The characters are all the "alpha numeric" characters on the QWERTY key board. This only occurs when email is sent from this iMac. The issue does not manifest when using any other lap top or computer.
Hence, I have ruled out the issue is a yahoo mail matter.
Again, I can access the Yahoo mail account form multiple devices and send email without unintended assignment of character strings, but when I send wmail using this iMac, the issue happens everytime.
Characters are stacked verticaly in a column. It looks as if all characters (except function keys) are included in the string.
Any ideas?
GMc

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Is it possible to read , send emails from the database in oracle8.

Hi,
My present project needs me to send emails from the database through procedures. There is an oracle package UTL_HTTP in oracle8 which could be used to read emails from database. So kindly tell how to go about sending an email from the database. Is this feature available in Oracle8i.
Thank you.

Okay , Here's my Javascript wgich is in an onload process.
Javascript variable addr_str displays the correct result.
My hidden field is called P101_CHECKVAL.
<html>
<title>CodeAve.com(JavaScript: Display All URL Variables)</title>
<body bgcolor="#FFFFFF">
<script language="JavaScript">

</script>
</body>
</html>
Everytime I put the HTML_get code into the javascript, it basically tells me I have an error on the page. So what exactly do I put that sets P101_CHECKVAL equal to the value of addr_str?

Send email from calcscript

Hi there,
Is there any way that we can send email from calcscript ? Suppose I dont want to use any external tool, such as blatmail..
please advice & thx

You can use a shell script where you can send an email to user(s). Call the MaxL script that runs the Calc Script that includes error checking (Error Checking and Branching in the tech Ref), then call the scripts that sends the email. I use Clemail, it's very simple, and you can find more information in the link below.
http://www.sureshotsoftware.com/clemail/manual.html
and you can download the free software here:
http://www.cleansofts.com/find/clemail.html
Hope this helps.
Message was edited by:
didopiff

C#: Sending email from a specific account when multiple accounts exist in Outlook?

Somehow I accidentally deleted this message trying to edit it... sorry.
Microsoft.Office.Interop.Outlook.Application outApp = null;
outApp = Marshal.GetActiveObject("Outlook.Application") as Microsoft.Office.Interop.Outlook.Application;
MailItem mailItem = (MailItem)outApp.CreateItem(OlItemType.olMailItem);
mailItem.Subject = "Director Script Confirmation Request";
mailItem.To = person;
mailItem.Body = message;
//mailItem.Display(false);
mailItem.Send();
How do I send email from a specific account when multiple accounts exist in Outlook?
Below is the code that I have. I think I'm supposed to use the AddressEntry or AddressEntries to designate where emails are sent from. However, at the moment, I haven't found an example.
SV

Hello SV,
The MailItem class provides the
SendUsingAccount property which allows to set an Account object
that represents the account under which the MailItem is
to be sent. Here is what MSDN states:
The SendUsingAccount property can be used to specify the account
that should be used to send the MailItem when the Send method
is called.
Sub SendUsingAccount()
Dim oAccount As Outlook.account
For Each oAccount In Application.Session.Accounts
If oAccount.AccountType = olPop3 Then
Dim oMail As Outlook.MailItem
Set oMail = Application.CreateItem(olMailItem)
oMail.Subject = "Sent using POP3 Account"
oMail.Recipients.Add ("[email protected]")
oMail.Recipients.ResolveAll
oMail.SendUsingAccount = oAccount
oMail.Send
End If
Next
End Sub

Send emails from a csv file (grouping records with the same email addresses)

Writing a script to send emails from a csv which contains record details and email addresses using the Send-Mailmessage cmdlet.
That part is no trouble, however, the csv file contain records that can have the same email address.
Is there a way/method I could send the records with the same email address once instead of sending individual email messages?
Thanks
Data in the csv file
Record number, description, email
1234, Test 1, [email protected]
5678, Test 2, [email protected]
1245, Test 3, [email protected]
4578, Test 4, [email protected]
$data = Import-csv c:\records.csv
ForEach($address in $data)
Send-mailmessage -To $address.emails -from [email protected] -subject "List of records" -Body $data -SmtpServer 192.168.1.1

The following code does what you are looking for:
$data = Import-csv c:\records.csv$mx = "192.168.1.1"
$subject = "List of records"
$from = "[email protected]"
$data| Group-Object email|Select-Object Name, @{n='msg'; e={$_.Group| Select-Object -Property "record number", description|ConvertTo-Csv -notypeinformation|Out-String}}|
ForEach-Object {Send-MailMessage -to $_.Name -Body $_.msg -SmtpServer $mx -Subject $subject -From $from}
I also recommend no forcing everything into one line. "One-liner" means "one pipeline" not putting all code on one unreadable line.
Your code should look like this:
$data|
Group-Object email|
Select-Object Name, @{
n='msg'; e={
$_.Group| Select-Object -Property "record number", description|
ConvertTo-Csv -notypeinformation|Out-String
}|
ForEach-Object {
Send-MailMessage -to $_.Name -Body $_.msg -SmtpServer $mx -Subject $subject -From $from
Now we can see the code and see that you are still unnecessarily converting back and forth.
To get the group look at how I did it.
$body=$_.Group | Format-Table |Out-String
Isn't that much easier?
Once you master the pipeline these things will become second nature. In PowerShell it is not necessary to write lots of code most of the time.
¯\_(ツ)_/¯

Cannot send email from yahoo account on iPhone 5

I just got an iPhone5 and I couldn't set up my Yahoo email as "yahoo"--it would not allow me to complete the process despot multiple attempts. I had to set it up as an "other" account. I can receive and read emails on my phone, but when I reply those messages will not send. They go to the outbox and an error message pops up that says" the email account has been rejected by the server" Does anyone have advice on either issue: setting up yahoo properly and/or sending email from phone?

outgoing mail server
SMTP - Yahoo! SMTP Server
primary server
Yahoo! SMTP server - ON
server port 465
That's what I have for my yahoo account.

Cannot send email from non .mac server

I am only able to send/reply emails using my .mac address. My 2 other server addresses keep giving me the following message.
"Cannot send mail. One of the recipient addresses was invalid".
How can I fix this?

You should be able to send email from Safari, however I do wonder why you wish to do this and whether there is something inherently wrong with using your mail app and your iCloud address.

Cannot send email from MobileMe account

Apple recently pushed out an update to the MobileMe calendar. Since upgrading my account, I am unable to send emails from Firefox4 (current version) in Windows. The page sits indefinitely at a loading screen. Apple Support won't help because it isn't an issue with Safari. Anyone else have this issue?

When using the MobileMe account preset to create the account, the SMTP server is created with 587 as the SMTP server port, which can't be changed when using the MM account preset to create the account.

Cannot send email from an iPhone to a Outlook group.

Hi,
My question is simple and I'd like an exactly same answer : Can iPhone users send emails from their iPhone's to one or more groups created in Outlook?
This is my situation: our organization is using iPhone to provide email, calendar, contact, task etc. to some of their employees. We are using Airwatch MDM Agent on user's iPhone because we have an Airwatch server in place. I have an user and she has an iPhone 5 and she has created some groups in Outlook but these groups are not reflected in her Contacts in the iPhone. I have update her phone with the latest update, although I was almost sure that this was not the issue, then I've found some interesting posts on internet saying that this was a known problem for the users with the previous iOS but I thought this might has been corrected with the iOS, apparently not.
Also I've tried ''the trick'' that is posted on several forums with the iCloud but neither so it's working. I am looking for a straight answer, if this works or not on iPhone's?
Thanks,
Sebastian.

There indeed ARE apps in the app store that will do what you want. Just search and find the one that best fits your needs.

Cannot send email from scanned pages

I am having trouble with the updated HP remote app on Ipad, since the update I can scan the pages in, but then cannot send them via email. This is qute important because i work remotley from the office and rely on getting my design drawings in on a nightly basis
please help

cannot send email from scanned pages

Cannot send email from ipad?

I can receive, but cannot send emails from my iPad. Always get message that I have wrong user name or password.

Then make sure that the settings are correct in your email account.
Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

Cannot send email from Exchange 2007 to Exchange 2013

Hello Anyone,
Anyone can help? I've prepare MS Exchange 2013 already, for Migration MS Exchange 2007 and I got the issue.
My issue is I can't send email from Exchange 2007 to Exchagen 2013, but for Exchange 2013 can send email to Exchange 2007,
is my issue only internal email for external email both Exchange server is working fine.
Regards,
Eakkasak

Thanks for your reply, when I send email from Exchange 2007 to Exchange 2013 I'm get the error message below.
Delivery is delayed to these recipients or distribution lists:
Eakkasak Buajan
Subject:
This message has not yet been delivered. Microsoft Exchange will continue to try delivering the message on your behalf.
Delivery of this message will be attempted until 8/29/2014 8:30:29 PM (GMT+07:00) Bangkok, Hanoi, Jakarta. Microsoft Exchange will notify you if the message can't be delivered by that time."
I'm already tick "Exchange server Authentication" in the Default Receive connector properties of Exchange 2013"
I'm restart services and restart all Exchange Server but doesn't work.
Thanks,
Eakkasak
Sent by Microsoft Exchange Server 2007

Cannot send email from my mobileme on iphone 3g

Suddenly coudn't access my mobileme email account. So I changed my password; and since I couldn't send email from my iphone 3G
I can send/receive emails from icloud webpage or Thunderbird.
Any clues?

outgoing mail server
SMTP - Yahoo! SMTP Server
primary server
Yahoo! SMTP server - ON
server port 465
That's what I have for my yahoo account.

Cannot send email from Iphone. A setting is off.

What are the correct settings to send email from my aol account that's included in my I Cloud acct. any suggestions???? Thanks Sue

Read this
How do I set up AOL Mail on my iPhone or iPod Touch? - AOL Help

Sending Email from Script

Similar Messages

Maybe you are looking for