Sending email using BPEL 11g and Mail Sessions

Hi gurus,
I have created a BPEL process which can emails to a set of people. The mail server, port etc are configured in EM Console --> user messaging service-email --> Email Driver Properties. I then added the 'from address' in soa infra --> workflow config.
My question is - is there any way in which I can achieve the same using Mail Sessions (Weblogic Console --> Mail Sessions)?
Regards,
Arindam

I ran accross this randomly so sorry if this is irrelevent with timing. It seems however that Text Expander might be what you need. It is a mac program though, not ios.
http://www.smilesoftware.com/TextExpander/

Similar Messages

  • Sending Email using both HTML and plain text

    I could use some advise on how to start researching email for
    both HTML and plain text messages.
    I have a script called class.phpMail.php, but the code is
    alittle advanced for me. Basically I can't get
    it to work on my server and I don't know where to begin the
    learning process here.
    I talked to my provider, "HOST" company goDaddy.com and I was
    told that to connect so that I could send email I would need this
    line of code. They didn't say it should by in my php.ini file but
    that was where I found it.
    SMTP = relay-hosting.secureserver.net
    This is the smtp address that my provider uses to make the
    connection with my mail client.
    I was told that with this line of code I would not need a
    password or username
    I did some further reseach and I found an article that stated
    that my original error:
    Warning: fsockopen() expects parameter 2 to be long, string
    given in ...../php/class.smtp.php on line 105
    was being caused by this code because the $port value needed
    to be between 1 - 65365:
    $this->smtp_conn = fsockopen($host, # the host of the server
    $port, # the port to use ----- "this is line 105"
    $errno, # error number if any
    $errstr, # error message if any
    $tval); # give up after ? secs
    In particular the $port value was coming in corrupted and
    that I needed to cast it.
    I did as they suggested and made it an (int) as they
    suggested.
    $this->smtp_conn = fsockopen($host, # the host of the server
    (int)$port, # the port to use
    $errno, # error number if any
    $errstr, # error message if any
    $tval); # give up after ? secs
    It resolved part of the error message however, the other half
    of the error message is shown below:
    Message could not be sent.
    Mailer Error: Language string failed to load: connect_host
    What exactly is the connect_host they refer to in this
    message?
    Would it be the string in my php.ini file refering to the
    SMTP = relay-hosting.secureserver.net
    I have allot of what I think are disconnected questions as I
    really have just begun to work
    with the mail() function. If anyone has the time to educate
    this newbie into the wonderful
    world of email() I would appreciate it.
    Thank You
    Kevin Raleigh

    Sorry to dig up an old post, but we've spent the last few days trying to work out why an email campaign being sent from BC is going into the Junk folder of recipients that use MS Exchange. We've fixed quite a lot of issues, including the fact that Legacy Templates have random JS injected just before they get sent, so we had to switch to the new template system. We've narrowed the issue down to one of three things:
    1. A missing alt tag on the tracking image that BC drops into the email (pretty unlikely)
    2. The BC Europe IP (54.240.14.45) is blacklisted here: UCEPROTECTL2 (possible, but if you actually look it's not the IP itself, but another IP on the same network, so unlikely)
    3. The fact that the HTML email has no text component.
    I agree, BC is late on this but I think that it needs to be added, even if most users have HTML-ready email clients, spam checkers do seem to prefer multi-MIME emails.
    This is backed up by the following SpamAssassin rule, which we are currently unable to resolve:
    -1.105
    MIME_HTML_ONLY
    Message only has text/html MIME parts
    You should also include a text version of your message (text/plain)
    So in my opinion, BC do still need to add this as a feature, otherwise the system is not viable for our customers and we'll have to look elsewhere.

  • We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is: Cannot send mail. The user name or password for iCloud is incorrect.

    We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.

    About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone.  Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc.  This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...

  • Problem with Thunderbird email: When I send email using a mailing list, with my email included in the list, the message shows up in my Sent list and others rece

    Problem with Thunderbird email:
    When I send email using a mailing list, with my email included in the list, the message shows up in my Sent list and others receive it but it does not come to my email Inbox. The same problem occurs when I send the email to the mailing list addresses individually. When I send a simple test message to myself, I do receive it in my Inbox. Can you help me??
    Bob Greenman

    Are you using either cc or bcc? Is googlemail involved? Some email providers suppress cc's and bcc's to oneself since you will have a copy in your Sent folder.

  • I am unable to send emails using mail from my btinternet and yahoo accounts similar problem to others with mobile me accounts on lion any suggestions?

    I am unable to send emails using mail from my btinternet and yahoo accounts similar problem to others with mobile me accounts on lion any suggestions?

    Do I need to delete all my email accounts and start again?

  • Send Email using Email Activity in BPEL

    Hi Everybody,
    I am trying to send email using email activity in BPEL
    All that I have done is,
    1.dropped Email activity between recieve i/p and reply o/p in my bpel project
    2.written all parameters in it like Default, To ,from etc.
    3.made changes in the ns_emails.xml in .........bpel/systems/services/config & in .......integration/esb/config
    4.restarted SOA,Jdeveloper
    --> but I was not succeeded.
    So please provide me with complete solution like what parameters to pass in smtp server,port no,protocols etc and which file to change in which directory. my work is pending just because of this.
    I would be very grateful to you.
    thanks in advance.
    mansoor.

    hi Eric,
    thanks once again for your instant reply.
    but still I am not able to send Email from bpel so I would be requiring your more help.
    I have gone through below link where you helped someone last year.
    Email
    As per this link I have downloaded the patch and tried but no result.
    in above link I have not understood one thing
    "the ip-address of soa-suite-server is allowed to make use of the smtp?
    you need to add this address in the mailserver-config "
    which was said by you.
    So can you please provide me the details.
    Also I wanted to know how we can come to know that our SOA suite will allow mail server to send Email.how to link mail server to SOA suite etc.
    So please help me out .
    thanks in advance.
    mansoor.

  • Since upgrading my computer last week i cannot send emails using talktalk, i can send via ipad and phone so not the server

    Since upgrading my system i have been unable to send emails using talktalk although i can receive them  i have no problem sending them via ipad or phone. can any one help please

    Open Mail -> Preferences -> Accounts.  Select the TalkTalk account and then the 'Account Information' tab. Drop down the 'Outgoing Mail Server (SMTP)' menu and select 'Edit SMTP Server List'.  Ensure that 'Server Name' under 'Account Information' is set to "smtp.talktalk.net".  You may also need to configure settings under the 'Advanced' tab. 
    More info here:
    http://help.talktalk.co.uk/app/answers/detail/a_id/1668/~/what-are-talktalk's-em ail-settings%3F#TalkTalk

  • When I send emails using my iPad, recipients are telling me that I am sending them blank emails.  I've had some of them forward the emails back to me so I can take a look and it seems that my message is actually there but the text is white...

    When I send emails using my iPad, some recipients are telling me that I am sending them blank emails.  I've had some of them forward the emails back to me so I can take a look and it seems that my message is actually there but the text is white.  Interestingly enough, I was a Windows user just a few months ago and I was on the receiving end of this same problem with someone who was sending emails from her iPhone.  I don't believe it is happening every time but if it happens even once it's a problem.  Any idea what's going on? 

    Oddly enough, having reported the problem it appears to have fixed itself. There may be some combination swipe gesture that triggers it is all I can think because I suddenly manged to zoom my display x3 by double tapping three fingers. Took me a while to sort this out but then when I got back home I could suddenly see all my emails again. Bizarre!

  • Does any one have a sample code for sending email using IMAP ?

    Hi
    thank you for reading my post
    I have tried to use SMTP and because of some problems i could not use it and i must use Imap (authentication required)
    here is my SMTP code , does any one know how i can tune it to use Imap , or has a code snippet to send email using Imap ?
    thanks
    private static void postMail(String[] recipients, String subject, String message,
                             String from) throws MessagingException {
            boolean debug = false;
            class SMTPAuthenticator extends javax.mail.Authenticator
                    public PasswordAuthentication getPasswordAuthentication()
                        return new PasswordAuthentication(mail_usrname,mail_password);
            //Set the host smtp address
            Properties props = new Properties();
            FileInputStream fis;
            try {
                System.out.println("Loading property file");
                fis = new FileInputStream(new File("c:/email.properties"));
                props.load(fis);
                System.out.println("property file done");
            } catch (FileNotFoundException e) {
                System.out.println("file not found");
                e.printStackTrace();
            } catch (IOException e) {
                System.out.println("can not read properties file");
                e.printStackTrace();
            /*props.put("mail.smtp.user", mail_usrname);
    props.put("mail.smtp.host", smtpHost);
    props.put("mail.smtp.port", smtpPort);
    props.put("mail.smtp.starttls.enable","true");
    props.put("mail.smtp.socketFactory.port", smtpPort);
            // create some properties and get the default Session
            Authenticator auth = new SMTPAuthenticator();
            Session session = Session.getDefaultInstance(props, null);
            session.setDebug(debug);
            // create a message
            Message msg = new MimeMessage(session);
            // set the from and to address
            InternetAddress addressFrom = new InternetAddress(from);
            msg.setFrom(addressFrom);
            InternetAddress[] addressTo = new InternetAddress[recipients.length];
            for (int i = 0; i < recipients.length; i++) {
                addressTo[i] = new InternetAddress(recipients);
    msg.setRecipients(Message.RecipientType.TO, addressTo);
    // Setting the Subject and Content Type
    msg.setSubject(subject);
    msg.setContent(message, "text/HTML");
    System.out.println(msg.toString());
    Transport.send(msg);

    Please try this out!!!!!!!!!
    You can send emails using Outlook also. You can send email over Microsoft Exchange with this object (or another email server, using IMAP/POP).
    Sub SendMailOutlook(aTo, Subject, TextBody, aFrom)
    'Create an Outlook object
    Dim Outlook 'As New Outlook.Application
    Set Outlook = CreateObject("Outlook.Application")
    'Create e new message
    Dim Message 'As Outlook.MailItem
    Set Message = Outlook.CreateItem(olMailItem)
    With Message
    'You can display the message To debug And see state
    '.Display
    .Subject = Subject
    .Body = TextBody
    'Set destination email address
    .Recipients.Add (aTo)
    'Set sender address If specified.
    Const olOriginator = 0
    If Len(aFrom) > 0 Then .Recipients.Add(aFrom).Type = olOriginator
    'Send the message
    .Send
    End With
    End Sub

  • Loss of sending email using WIFI

    As of this morning 8-20-08, after updating to 2.02, I no longer am able to send emails using my own wireless network. Previously this was no problem. Neither Fido or Apple have any idea of what I am talking about. Fido washed their hands as they do not support WIFI. How convenient, they sell the phone and charge for the service but do not support it. Videotron, my ISP, thinks the issue is my wireless router but I can send via gmail so that's out. I resovled the problem by configuring my accounts to use my gmail smtp server as a second option and now the spinning wheel is short lived and messages are sent.
    I'm sorry to say that I had fallen for all the hype about Apple but truth is they are but a Microsoft wannabe.
    Disinchanted

    So here's the wierd thing.
    I was having the same problems. Set up SMTP for Videotron when at home using relais.videotron.ca SMTP with no authenticationon port 25 & all was good in the world. However when I went out, bang. Nothing. Couldn't send a mail for love nor money.
    Thought aboutit & changed settings to use relais.videotron.ca SMTP, but this time using authentication of vltl** / password credentials with no SSL (Videotron doesn't use SSL) and again everything was fine. Of course, when I got home again, bang. Everything fell over & no more mail sending foe me!
    So I figure, when I'm at home I'm on my trusted network at port 25, I don't need authentication and all is good, but when I'm out i'm seen as potential SPAM by port 25 on videotron & get blocked.
    Tried using port 587 instead when for both home & mobile but had no luck either.
    Then a strange thing happened. I'd resolved to having to set up 2 SMTP servers on my iPhone & switching between the two based on where I was. Pain in the a**, but there's always a trade off for early adopter technology So I set up my primary SMTP to use port 25 with no authentication, and a secondary server to use the same relais.videotron.ca outgoing server, but this time WITH authentication using vltl** \ password credentials.
    After a walk to the shop when I'd been on my secondary SMTP server (successfully sending & recieving) I came home & inadvertantly forgot to swith back to my primary SMTP. Recieved a mail & then responded with no problem!
    Net result, I now have a permanently switced off primary server & a permanently switched on secondary server which uses relais.videotron.ca details with vltl** \ password authentication credentials active (like I did on my old silver iPhone) & all is good in the world, both at home & out mobile, both for sending & recieving!
    Will field test some more tomorrow but it may be a 2.0.2 bug where ther primary server details fcuk up whereas the secondary server details are stable.
    So long as it works, who cares!
    Jof

  • IPhone cannot send email using Yahoo account. iPhone no envia correo Yahoo.

    Hi Everyone,
    I just got my iPhone from Movistar Venezuela and I've found I'm unable to send email using my Yahoo account. However, I can receive Yahoo email just fine (paid $20 for Mail Plus subscription), my GMail account can send and receive perfectly, and I can go surfin' Safari with no problems too.
    The error message I get is "Cannot send mail: an error occurred while delivering this message". I called Movistar Customer Support and they said everything was fine on their end...
    In typical Apple fashion, the error message is so simple I have no idea where the problem is. Does anyone know how can I get more information and how to solve this annoying problem? My Yahoo account is actually my primary account...
    Thanks in advance!
    Saludos a todos,
    Acabo de comprarme un iPhone de Movistar en Venezuela y me encuentro sin poder enviar emails con mi cuenta Yahoo. Sin embargo, si puedo recibir correo Yahoo bien (pague $20 por mi suscripcion a Mail Plus), mi cuenta de GMail si puede enviar y recibir email sin problema y puedo navergar con Safari sin ningun problema.
    El mensaje de error que recibo es el siguiente": "No se puede enviar correo: se ha producido un error al enviar el mensaje". Llame a Atencion al Cliente de Movistar y me dijeron que no habia ningun problema con mi linea o con su servicio de datos...
    Como tipica cosa Apple, el mensaje de error es tan simple que no tengo NI IDEA de cual es el problema. Alguien mas ha sufrido este problema? Sabe alguien como puedo obtener mas informacion de este error y como solucionarlo? Lamentablemente, mi cuenta Yahoo es mi correo principal...
    Gracias de antemano!

    Creo que resolvi el problema, temporalmente.
    1) Borra tu cuenta
    2) Vuelvela a crear
    3) Ve a Ajustes
    4) Ve a Mail Contactos Calendarios
    5) Ve a la cuenta problematica
    6) Ve a SMTP
    7) Anadir nuevo
    8)
    Nombre servidor: smtp.mail.yahoo.com
    Nombre de usuario: no dejar vacio
    Contrasena: no dejar vacio
    Usar SSL: si
    Autenticacion: Contrasena
    Puerto del Servidor: 25
    Lo consegui de aqui: http://www.emailaddressmanager.com/tips/mail-settings.html
    Dime que tal te funciona.
    I think I solved the issue, temporarily at least
    1) Delete account
    2) Create again
    3) Go to settings
    4) Go to Mail, Contacts, Calendars
    5) Open problematic account
    6) Go to SMTP
    7) Add a new server
    8)
    Name: smtp.mail.yahoo.com
    User name: do not leave blank
    Password: do not leave blank
    SSL: Yes
    Autentication: Password
    Port: 25
    I got this info from: http://www.emailaddressmanager.com/tips/mail-settings.html
    Let me know how this works

  • Cannot send email using port 465 from a network other than my ISP

    I cannot send email from my ISP POP mail account when I am in a different network (e.g. when traveling). This happens with my iPad and my iPhone. However, I can send mail if I turn off wifi and use 3G. The outgoing port is 465.
    Using my .mac account I don't have any problems sending mail using wifi or 3G.
    I have tried adding smtp.mac.com or smtp.me.com as a secondary server to my POP account but it does not work. The secondary server disappears after I add it.

    Contact your isp and ask them what the smtp settings are for when you are traveling. Most isps have different settings for sending email when off their network.

  • Sending email using IMAP through SMTP Port 587

    Hi,
    I have been sending Mail Merged email to people in organizations that I am active in, using IMAP embedded in StarOffice 5.2 (on Windows 98 Second Edition). This worked fine until a few weeks ago when I received an error message stating that AOL, as part of their anti-spam efforts, was no longer accepting third-party emails on default port 25. All third-party email must now use port 587. I looked in the IMAP dialog and in the Tools -> Options dialog, but did not see any place to change the SMTP port. The AOL error message information page had instructions for changing the port in other applications (Outlook, Eudora, etc.), but not for StarOffice. So, I have some questions:
    1.Is it possible to change the port in StarOffice 5.2?
    2.If not, how does StarOffice 8 send Mail Merged email? Does it use IMAP, and if so, can the port be changed?
    3.Also, I like the integrated configuration in StarOffice 5.2, where database fields can be directly accessed in the Insert -> Fields -> Other dialog. In looking at the Mail Merge section in "SO8_What's New.pdf", it appears that Mail Merge in StarOffice 8 is restricted to predefined fields. Could I still access fields from my existing databases?
    These is a lot of questions, but right now I am blocked from sending Mail Merged emails which is imparing communications with volunteers who are running educational programs. I appreciate any and all help that anyone can provide.

    Please try this out!!!!!!!!!
    You can send emails using Outlook also. You can send email over Microsoft Exchange with this object (or another email server, using IMAP/POP).
    Sub SendMailOutlook(aTo, Subject, TextBody, aFrom)
    'Create an Outlook object
    Dim Outlook 'As New Outlook.Application
    Set Outlook = CreateObject("Outlook.Application")
    'Create e new message
    Dim Message 'As Outlook.MailItem
    Set Message = Outlook.CreateItem(olMailItem)
    With Message
    'You can display the message To debug And see state
    '.Display
    .Subject = Subject
    .Body = TextBody
    'Set destination email address
    .Recipients.Add (aTo)
    'Set sender address If specified.
    Const olOriginator = 0
    If Len(aFrom) > 0 Then .Recipients.Add(aFrom).Type = olOriginator
    'Send the message
    .Send
    End With
    End Sub

  • Can't Send Emails With Mac OS X Mail?

    Why can't I send emails through Mac OS X Mail when I'm using another internet connection (besides my main home connection)?
    Thanks,
    Mason

    This is likely either because when at home you are using the SMTP provided by your ISP, and it is not separately Authenticated and thus blocked by the host ISP at the other venues, or you are using a third party SMTP successfully on Port 25 at home, but in the other venues, they are blocking third party SMTP on Port 25.
    If the SMTP of your ISP, check to see if they have a version that can be authenticated for travel use -- many do.
    If using another SMTP at home on Port 25, change to Port 587 which should work either at home or away.
    More info, please, if this does not solve, including who your ISP is?
    Ernie

  • Create and send EDM using Adobe MUSE and Business Catalyst.

    There is just one thing missing in my armour as a graphic designer – creating and sending EDMs.
    Given the success of creating websites using Adobe Muse, an EDM functionality would be a fantastic addition to MUSE and Business Catalyst (BC). Imagine this:
    1. I open Adobe Muse.
    2. I select "New EDM"  (instead of "New Site").
    3. I design and build my EDM to spec.
    4. I test my EDM using 'Preview' or a single send to myself.
    5. I publish my EDM to Business Catalyst.
    6. In BC, I review my EDM and add 'FROM NAME', 'FROM EMAIL ADDRESS' and 'SUBJECT'.
    7. I import my database.
    8. I hit SEND!
    After my EDM has gone out, I can review a report in BC - just like any report for a website.
    As a designer that does not know code but can build a website using MUSE - creating an EDM is the one thing I can't personally offer. Using a digital supplier can be expensive and website like Mail Chimp aren't professional enough.
    To the Adobe Muse team, please – for the love of humanity – consider this as viable addition to MUSE. You will save a lot of heart ache and win a lot of hearts.
    Thanks,
    Phil

    Done!
    See here: Create and send EDM using Adobe MUSE and Business Catalyst.

Maybe you are looking for

  • Servlet calls to Oracle Report Server

    I have an app server (oracle 9ias) which will be available to the public. However, I also have an oracle report server that produces pdf reports from an rdf template but the server will not be available to the public. How can I use JSP,java servlets

  • Folders In Mail Disappeared after Leopard Boot

    I downloaded Leopard to my wife's computer, and her mail, internet settings (including bookmarks) are all intact, however, I had to download twice to my MBP before it went through, now my bookmarks are gone, and folders I had created in mail are gone

  • Funds Flow BPC 10.0 NW

    Hello Experts, We have to prepare "Funds flow Statement" for BPC 10.0 NW. The requirement is as follows: Data is coming from BI which comprises of Trial Balance. 2 reporting period shall be selected. If the diff. between the group comprising of GL A/

  • My CMS website is built with Flash...help!

    To access the back-end CMS of my website it works on a double click basis, not compatible with touch screen....so apparently even if I downloaded something like iswifer or firesky it still wont work.... any ideas? Or do I have to pay my web guys huge

  • Problems after updating to IOS5!

    I updated my Itouch 4th Gen a week ago and it really worked fine, Facetime, Imessage and syncing music was perfectly working Until yesterday. Itunes won't sync into my ipod touch all the songs grayed out and not syncing. I can't receive or make calls