Sending External Candidate data from E-Rec to CRM

Hi,
I need to transfer candidate data that is stored in another HR instance (data is saved in Business Partners in E-Rec).
Any recommendation how can it be achieved ? Via ALE?
Thanks a lot for your help !!!

Hi,
i used different approaches here depending on the release, number and content of the additional fields:
One option is transfering the additional information into HR by having a modification in the data transfer activity so the fields are put into table T752F in the HR system and are available in PA48.
Similar but without a modification is a workflow linked to the data transfer activity which transfers the additional fields into the table. No modification needed but a bit more tricky to put the data into the table as you have to identify the correct temporary employee id the records need.
A complete other approach would be using the XI / PI data transfer instead of the RFC based one.
Best Regards
Roman

Similar Messages

Function Module to send Vendor Master Data from SRM to ECC

Hi Guys
I heard there is a function module in SRM which can send Vendor Master Data from SRM to ECC please confirm for me if there is such a function Module and what is it called. Thanks

Hi,
Vendor Master data is replicated to SRM from ECC. Standard Transactions (BBPGETVD,..) will be used to replicate the data from ECC.
Vendor Master will exists in ECC, so there is no point in sending the same back from SRM to ECC. If the requirement is the other way around, we can use the transaction BBPGETVD in SRM system.
Hope this helps.
Regards,
Hemanth

Sending attachments/binary data from flex to Restful APIs

Hi,
We have a requirement of sending the files (or binary data) from flex GUI to Restful services(backend APIs). We are using flex HTTPService component to invoke the rest apis. The Rest APIs are designed to accept the multipart/mixed data which can support the binary data as well.
Can any one help us understand, how can we send the multipart/mixed OR multipart/form-data from flex to backend using the HTTPService. Or is there a better way to send the mixed data from Flex GU to Restful APIs.
Request you to please respond to this at the earliest as this is very urgent.
Thanks and Regards,
--Revanth

Has anyone worked on this issue?? i wanted a quick response as we are in the middle of the development and this is a r
equirement
Thanks
-Revanth

E-recruiting status of a external candidate data

Hi experts,
I have a question about status of an external candidate data. Here I have a situation where the customer I'm working for asked that whenever a external candidate create data (a CV) via e-recruiting, the information should be available to recruiters and only be blocked if the candidate perform a step to block data. Today the standard does the opposite, when an external candidate creates data, this data remais blocked until the candidate unblocks it via a step in E-recruiting.
Is there any possible way to change that via customize or I'll have to create an enhancement?
Thanks in advance for your time!
best wishes,
Thais

Hi Sally
Apologies for the late resonse, we have applied the note and system is generating another error. Please see the details below:
When a Recruiter creating the external candidate and on saving the data system is generating the following error. We are using the EP5 system.
u201CThe client xxxx doesnu2019t contain an active application areau201D.
Thanks in advance.

Uploading data from R/3 to CRM

Hi Gurus,
We have the following scenario:
Our customer master data is created and maintained in R/3. Now we need to create and maintain in CRM.
1. we need to bring R/3 customer to crm and start maintaining only in crm
2. there should not be any number overlap
eg. 1000 customers in r/3 starting no. 1 to 1000, we need to bring this customer to crm and start maintaining in crm. then from cusotomer no. 1001 onwards need to create from crm.
Can anybody help me on the steps to be followed and the configuration settings to be maintained. How the number ranges have to be maintained and what settings should be done in CRM and R/3 before transfering the data.
Also the steps on how to upload data from R/3 to CRM??
Thanks.
Divya Gupta

Hi Divya,
Create 2 different number ranges and groupings and assignement in CRM system
For Ex:
Create a number range(External) with 1 to 1000 and create a grouping ABC and do the assignment(R/3 customers)
Create a number range(Internal) with 1000 to 100000 and create grouping XYZ and do the assignment (New customers)
we need to bring R/3 customer to crm and start maintaining only in crm
Do the following settings in R/3 system to bring the customer data from R3 to CRM
T Code: PIDE
Select R/3->CRM: Assign Account Grp. to BP Classification
Select the Account group which is created in R/3 for customers and set classification as B and select the grouping as ABC(Defined).
and start initial download in CRM system with T.Code R3as
Load Object = CUSTOMER_MAIN
Source Site (Sender) = R/3
Destination Site (Receiver) = CRM
and Execute.
It will bring the customer data from R3 to CRM.
While creating new customers in CRM system select the grouping as XYZ to avoid overlaping.
Regards
Narayana

Upload data from Excel to Sap-Crm

Hi All,
I need to upload data from EXCEL to SAP-CRM system.The problem is in crm there is no ALSM_EXCEL_INTO_INTERNAL_TABLE or corresponding function modules exist.Using GUI_UPLOAD I can upload data from excel to CRM but the main problem with this is it supports only 255 chars for entire line, in my excel file it contains more than 255 chars.Please help me out.

Try the following :
Class: CL_GUI_FRONTEND_SERVICES
Method: GUI_UPLOAD
Thanks
Allot points if this helps!

Upload data from Excel into SAP CRM using webservices

Hi,
I want to upload the data from EXCEL into SAP CRM using a web service, can anyone say me the process and also how to map the excel and the source code structures.
Thanks,
Sanju.

Try the following :
Class: CL_GUI_FRONTEND_SERVICES
Method: GUI_UPLOAD
Thanks
Allot points if this helps!

Error message in pulling data from R/3 to CRM

Hi,
I am trying to pull customer data from R/3 to CRM with different SHIP-TO partner. In this case, the VAT REG. NO. is different from its country ISO code, so when i try to execute in tcode R3AR2 and R3AR4, I was encountered error message in tcode 'SMW01' saying "ISO CODE <code> IS NOT CORRECT IN THE VAT REGISTRATION NUMBER".
As far as I know, SAP had an on-going dialog enhancements on this one, is there anyone knows any recent updates from SAP that might solve this problem?
Please help.
Thanks.

Hello,
according to our development this message only should accur in case there are inconsistencies on R/3 side which lead to such errors in inbound processing.
Therefore in case you don't see any inconsistencies I would recommend to address it via OSS message.
Best regards,
Christian

Error in pulling customer master data from R/3 to CRM

Hi,
I am trying to pull customer data from R/3 to CRM with different SHIP-TO partner. In this case, the VAT REG. NO. is different from its country ISO code, so when i try to execute in tcode R3AR2 and R3AR4, I was encountered error message in tcode 'SMW01' saying "ISO CODE <code> IS NOT CORRECT IN THE VAT REGISTRATION NUMBER".
Is there anyone knows any recent updates from SAP that might solve this problem?
Please help.
Thanks.

Hello,
it seems your customizing of ERP and CRM is different in this area.
Please try a new initial load for all the customizing objects which may be responsible:
DNL_CUST_BASIS
DNL_CUST_BASIS2
DNL_CUST_BASIS3
DNL_CUST_BASIS5
DNL_CUST_BASIS6
DNL_CUST_BNKA
DNL_CUST_KTOKD
DNL_CUST_PRC
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_PROD3
DNL_CUST_SPROD
DNL_CUST_TVAST
DNL_CUST_TVFS
DNL_CUST_TVKN
DNL_CUST_TVLS
We do every week a new load of this objects using a background job.
Alternativly you could investigate which customizing object is the correct one and only load this.
After this new load retest your scenario.
Best regards
Manfred

Error while replicating customer master data from R/3 to CRM

Hi gurus,
I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows "Incorrect parameter with CALL FUNCTION"
Kindly help regarding it.
regards,
vimal

Hello Vimal,
Please refer 552435 and see if this helps.
Please reward points.
regards,
Muralidhar Prasad.c

How to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?

how to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?
Plz suggest me any BAPI or IDOC for that ..
thanks in Advance .

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

Downloading Master data from R/3 to CRM

Hi all,
Inorder to download Master data from R/3 to CRM, first we need to download all relavent customizing and condition objects, is this is the correct procedure. Pls anyone clarify this.
If we make any changes to the data in R/3 which is already downloaded to CRM, will those changes replicate in CRM, inorder to replicate those changes in CRM what are the necessary things to be done.
please anyone clarify on this
Thanks In advance
Phani Kumar TN

Hi Phani -
You will need to download all the condition and customizing objects which are relavant for the data you are replicating. Else you will get errors.
Ans to 2nd part of your Q - you can do this by doing a delta load.
I have some documents which u may find useful for this. Let me know where I can e-mail that.
Cheers,
Aarthi.

Download data from ECC6.0 to CRM

We want to download data from ECC6.0 to CRM 2.0.
I am facing an error while trying to use Function module 'SMW_CALL_MIDDLEWARE'
to create and post BDOCS in CRM 2.0.
The BDOCs are getting posted successfully. However, function module is updating
only SMO* ( Mapping) tables but not the CRM database tables. Does anyone has any suggestion on this.

I think your corresponding mobile bridge needs to be properly active. That should take care of posting data from CDB to CRM.

Initial Load for Master Data from R/3 to CRM

Hi Middleware Experts,
I have an ambiguity on initial load of enhanced master data from R/3 to CRM. The current situation is
1)I have already enhanced master data on R/3 side with some additional fields. Now shall i go ahead with standard intial load of these Master data to CRM without creating middleware interfaces to map those enhanced fields on CRM side?
2)Also after doing initial load from R/3 to CRM, if I develop middleware interfaces for mapping these new fields of master data and then again do the initial load, so that new fields also get mapped, will the initial load be done properly as i have already done it once? will it overwrite the previous initial load data on CRM side properly?
Please suggest whether it can be done or not and which is the better option.
Regards,
Rahul

Hi Rahul,
Since you have not done the mapping yet the middleware will not bring those fields to CRM it will work just like a standard initial load without considering the enhanced master data field.
When you develop the middleware interface and enhance the CRM data structure also and then you can see the exchange of those fields through MW. You can start the intial load at that time also its not that you can do the initial load just once. But the better option would be that you avoid doing initial load several times because its time consuming activity. You do all the enhancement and then finally perform the initaial load.
Allot points if my post helps!!
Best regards,
Vikash.

Sending and getting data from external file.

I'm running it in actionscript 1 and 2 since 3 wouldn't work when getting data from external media. I'm trying to find out how to post data to a PHP file and getting from that file I'm trying to make the flash for something that works like a game but differently. Since I just found out how to make the HTML stuff show up but a lot of times, some of my text will not appear so I don't know what's going on.
Does anyone know how to send and get data both at the same time from a sample file?
The sample file is example.php
It has to sent information like ID and NAME
and it has to get information like Description and userID

Ned Murphy wrote:
The tutorial I pointed you to does provide the visuals you requested, both the AS code and sample PHP code, so I can't see where your learning by visuals aspect holds up.... your approach sounds more like you want someone to hand you a tailored solution that you won't need to learn from. Visuals require reading and doing. If that fails to get absorbed or you couldn't understand/revise it, what could anyone else prepare for you that would work better?
I did the tutorial and everything but every time I press the button or even load it, it keeps on saying undefined. I like the have a sample FLA file so I can figure things out. I did everything from the site but it won't work out for me.
I did step 5 too because it was almost all that I was looking for but it won't even work. keeps on saying undefined. I would show you but webcam max won't work and I can't show you an example.
EDIT:
You know it's frustrating when I don't know how the heck I'm supposed to do this stuff. I read the whole dang thing and I still can't get this dang thing working.
I did everything. EVERYTHING. I just don't get this crap.

Sending External Candidate data from E-Rec to CRM

Similar Messages

Maybe you are looking for