Sending external emaiil from worklflow without using automatic forward
Dear all,
I implemented an emaiil sending when a purchase requisition needs to be released.
I first assign an emaiil adress in this step using type U and my emaiil adress, that's works fine.
Then, I created an organizational structure in order to send the emaiil notification to several recipient.
The 3 users receive the notification in their SAP inbox and I would want to send directly to their Lotus maiilbox.
I set-up an automatic forward toward my hotmaiil adress and that works fine.
But I would want to avoid doing that to all the users.
Do you know how to proceed to send emaiils avoiding the automatic forward to their Lotus mailbox please ?
What it's strange is that when I receive the emaiil in hotmaiil I can see the 3 maiil adresses (retrieved from user data) in the distribution list. But only the adress coming from the automatic forward triggered an external emaiil.
Thanks a lot for your answers.
Erwann
No answers ?
Similar Messages
-
Can i send a email from application without using exchange server?
Hello
I am developing a 3 tier application using EJB, JSP....and i want to incorporate the mail sending facility.
Can i send a email from the application without using exchange server?
plzz help!!!!
PavanYou will require some kind of SMTP server to be able to send mail from your app (not necessarily M$ exchange.) Just look for mail servers for the platform of your choice.
Vijayan -
I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
https://support.apple.com/en-us/HT201322
A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!My apologies for the lack of photos, here is my post again with photos.
I have hidden unwanted books from the purchased area of the iBooks store, but they're are still appearing on the front page of iOS as cloud downloads, is there a way to remove these from iBooks without using the hide iCloud books button?
Let me explain a little more. I had downloaded a lot of free books in the past as a trial when iBooks was first released and since then I have decided I no longer want them, because of this I hid them from the purchased section of the iBooks store. The 5 books left are ones I decided to keep as seen in the following picture.
This is how it appears in iBooks on my mac. There are 4 books downloaded and 1 book that I have decided not to download at this time. I would still like to keep this book available in the cloud incase I want to download it again in the future. You’ll notice that hide iCloud books is not selected, if I wanted to hide the book that I have chosen to keep in the cloud, but have not downloaded yet I could.
This is exactly how I think this feature should work. If you have hidden a book from your purchases it should not show up in the mac Ibooks app. (I am aware you can never actually delete a purchase, just hide them and that hidden purchases can be restored to your account from within the account management section of the iBooks store).
The iOS app is working differently for me. Here is a picture of the purchased tab on the iBooks store in iOS Ibooks. Again notice that pictures of Lilly is still yet to be downloaded. This is how I expected it to look.
If we visit the front page of iOS iBooks the view is very different from what I expected. Here we can see the 4 books I wanted to keep on my device and have downloaded. We can also see the 1 book I wanted to keep, but did not want to store locally on the device and left in iCloud (Pictures of Lilly). However we can also see all the books I had hidden from the purchased section of my iTunes account and which I believe should no-longer be visible, Dracula, frankenstein etc…
I am aware of the hide iCloud books button within the iOS app, but I did not need to use this to hide the books I had removed from the my purchased section of the iBooks store on the mac, why are they still appearing in iOS?
I’m still not sure if this is a software glitch or not. This article suggests to me that books can be hidden, but I had already completed these steps.
https://support.apple.com/en-us/HT201322
A browse of google also suggests people may have been able to hide past purchases from the front page of iBooks on iOS in the past.
In case there was an issue with syncing I tried logging in and out of my iTunes account via settings in iOS. Force closing the app, disabling automatic downloads and removing my device from iTunes in the cloud. Syncing with iTunes on the mac did not correct the issue either.
Interestingly I have the same issue on my iPhone 6 running iOS 8.3 as I do on my iPad mini suggesting that this might be an issue either with my account or with iOS iBooks software in general.
If there is a way to remove the already hidden iBooks in your account from the front page of iBooks on iOS without using the hide iCloud downloads button? Please help community!
iPhone 6, iOS 8.3, Also an issue on my iPad mini iOS 8 -
How can I send an email from Sharepoint Online using sandbox solution?
How can I send an email from Sharepoint Online using sandbox solution?
If possible I do not want to use workflow.
Is It possible to do it without using workflow?hello Steven Andrews,
when any user sends a message using contact us page in SharePoint online.
1. We are inserting item in Contact Us List . - This is working fine
for anonymous users also. We have used Office365 anonymous codeplex wsp and it is working fine. Anonymous user is able to insert new record in the Contact Us List.
2. Once, new record is inserted in Contact Us list, we want to fire email notifying thanks to the user on his email id as well as to our company x person for notification of new inquiry.
We tried using Workflow having impersonation step for anonymous user but it is not working for Anonymous users. Workflow is able to sent the email if someone logged into system but not working for Anonymous user although workflow is getting started
but not able to send email although used Imperonsation step.
We are stuck into implementing second step. -
To send external email from ABAP
How to send external email from ABAP Program and what are the settings to be done for the same ?
Please check..
Sending External email through SAP
What is the FM for sending the external email through SAP by attaching layout set to it?
These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
SAPoffice: Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
SAPoffice: Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
SAPoffice: Send new document
How to send a report to an external mail-id?
Try this sample code :-
REPORT ZREPORT_TO_EMAIL NO STANDARD PAGE HEADING LINE-SIZE 200.
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
Receivers
receiver_list-recextnam = '[email protected]'. "-->
EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
Mail subject
w_object_hd_change-objdes = 'Message subject'.
Mail body
APPEND 'Message content' TO message_content.
Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment. -
Can We Send SmS To Any Mobile, Without Using Gsm Modem, Through Oracle
Can We Send SmS To Any Mobile, Without Using Gsm Modem, Through Oracle ?
suppose you don't have mobile connected to ur com port.is this helps?
http://inside-apex.blogspot.com/2007/05/sending-sms-to-mobile-phone.html or
Re: Send Message From Oracle To Mobile Device -
Another modif tcode clearing open item from MM without use F-51
all Guru ,
Please help. Is there any way for another new modif tcode clearing open item from MM without use F-51. So i can use copy transparent from main table MM, for item like plant, vendor, material,price, oty, plus add new field for calculation method in order to post this result formula through FI posting without F-51 but also can clear open item dan clearing line item ? or only can clear open item ? ...it's oke. For line item can be done maybe can be run with F-03 ir F13E
I am trying to observe table BSIK (open item) and relation with BSAK(clear item)...is it right way ?
Case :
i want to clear open item for GL account inv.of.promises from transaction MM, with jurnal :
inv.of prom (Db)
Inventory (Cr)
Then this inv.of prom must be calculated again with raise price. And then this cummulate in the of month.
After that we want to clear with posting FI by searching any open item for that GL with jurnal :
Other receiv.(Db)
Accrued exp (Db)
Inv.of.prom (Cr)Hi PK,
1. Should we maintain OIM for all Excise G/Ls (BED, ECess, SHECess)?
- Please DO NOT maintain OIM on BED, ECESS and HECESS, only to be maintained for Cenvat Clearing Account. Also note that clearing of Cenvat Clearing is not easy, as in standard SAP, the assignment field is not updated with the same information for the Dr. and cr. line items of Cenvat Clearing Account. You need to use an exit in Substitution for it to populate the P.O. no. and line item at the time of MIRO.
2. How to clear the BED Excise GLs which is with OIM in our system, it is thru F.13 only?
You can use F.13 only if the entries are matching not otherwise, else clear all of them manually if you have good control of your account balances.
3. Can we activate or deactivate OIM any point of time, I mean can it be activated in case the G/L balance amount is not ZERO?
OIM activation for a GL - Refer Note No.1356457.
OIM Deactivation : You can deactivate OIM after making the balance Zero on that Account and by changing the Message No. FH 190 to warning in OBA5.
4. What is the use of T Code J2IUN, I have gone thru the SDN links, but I am not able to execute the screen. What parameter should we select while executing J2IUN, when we use Pay cenvat from ser tax cr and Pay ser tax from cenvat cr.
J2IUN is to utllize Excise Duty. The liability of Excise duty is utilized from Excise balances of BED, PLA , Service tax etc.. as per business requirements.
Hope this helps you.
Regards,
SAPFICO -
Executing an SSIS package from TSQL without using xp_cmdshell?
How can I execute an SSIS package from TSQL without using xp_cmdshell?
I have a web-app which calls some SQL which executes my SSIS package (a DTSX file, but stored in the server). But the security policy for my application won't permit me use to xp_cmdshell.
I want to do this:-
DECLARE @returncode int
EXEC @returncode = xp_cmdshell 'dtexec /sq pkgOne"'
Is there another way for executing a Package without going to the command line (e.g. is there some other system stored proc)?
ThanksWhoa - don't go taking my words as saying "it should work". I never said that - I just said I know less than you :) I'm assuming that since the CLR is .Net, and you can launch a package from .Net code, you may be able to do so from the CLR.
But... I also know that CLR has lots of restrictions on it, and some of those may cause you to be unable to run it from the CLR.
One thing I will say - I've never heard of anyone doing this. That's got to tell you something about:
Whether it can be done at all... although I think I'd have heard/seen something about how it's not possible.
Whether it's a good idea... maybe other routes are less trouble.
Talk to me now on -
How to connect from java without using oracle client installation
hi ,
Please tell me how to connect from java without using oracle client
Thanks & Regarshttp://www.orafaq.com/wiki/JDBC#Thin_driver
-
Sending external email from SAP with following requirements...
Hi All,
I need to send external emails from SAP by meeting following requirements.
1) With subject line more than 100 characters.
2) No attachments, only body which has specific format (blueprint/layout) and would be amended often, hence code shouldn't be touched during amendments.
3) Should be able to know the success/failure of mail sending at program level.Hi,
The code below demonstrates how to send an email to an external email address
*& Report ZSENDEMAIL *
*& Example of sending external email via SAPCONNECT *
REPORT zsendemail .
PARAMETERS: psubject(40) type c default 'Hello',
p_email(40) type c default '[email protected]' .
data: it_packing_list like sopcklsti1 occurs 0 with header line,
it_contents like solisti1 occurs 0 with header line,
it_receivers like somlreci1 occurs 0 with header line,
it_attachment like solisti1 occurs 0 with header line,
gd_cnt type i,
gd_sent_all(1) type c,
gd_doc_data like sodocchgi1,
gd_error type sy-subrc.
data: it_message type standard table of SOLISTI1 initial size 0
with header line.
*START-OF-SELECTION.
START-OF-SELECTION.
Perform populate_message_table.
*Send email message, although is not sent from SAP until mail send
*program has been executed(rsconn01)
PERFORM send_email_message.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*& Form POPULATE_MESSAGE_TABLE
Adds text to email text table
form populate_message_table.
Append 'Email line 1' to it_message.
Append 'Email line 2' to it_message.
Append 'Email line 3' to it_message.
Append 'Email line 4' to it_message.
endform. " POPULATE_MESSAGE_TABLE
*& Form SEND_EMAIL_MESSAGE
Send email message
form send_email_message.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Add the recipients email address
clear it_receivers.
refresh it_receivers.
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = gd_doc_data
put_in_outbox = 'X'
importing
sent_to_all = gd_sent_all
tables
packing_list = it_packing_list
contents_txt = it_message
receivers = it_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
endform. " SEND_EMAIL_MESSAGE
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
Hope this helps.
Reward if helpful.
Regards,
Sipra -
Is there a way to send a message from my IPAD using a bluetooth keyboard?
Is there a way to send a message from my IPAD using a bluetooth keyboard? There must be a way, but for the life of me I can't seem to find the shortcut. I'm using Logitech 811 keyboard and have an IPAD 2.
Thank you,Are you asking if there is a way to press "Send" from the BT keyboard as opposed to reaching over and tapping it on the screen? Not to the best of my knowledge.
Looking at the posts in the More Like the Box to the right, I did find this link. It's old and may not be valid or useful:
http://the.taoofmac.com/space/blog/2012/06/22/0023#command-tab-on-your-ipad
But it's a place to start. -
Send mail with attached file without using Repository
Hello,
I want to know if have a way to Send mail with attached file without using Repository.
Regards
EladElad,
Check this article where a image has been picked by the file adapter and sent as an attachment to the mail adapter.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816">Sending an Image File Through XI in a File-to-Mail Scenario</a>
For how to proceed without integration repository content look into this blog,
<a href="/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository">How to send any data (even binary) through XI, without using the Integration Repository</a>
Combining these 2 you have the solution.
Regards
Bhavesh -
HT202724 How i can send multiple sms from mac without being a group message ?
How i can send multiple sms from mac without being a group message ?
Start new conversations, one for each recipient.
-
Send multiple records to rfc without using BPM
Dear Experts,
Could you please help on the following scenario.
I need to send multiple customer master data records from a file to rfc without using BPM.
The following is the mapping i am using
source Target( RFC)
====== =============
Tree occurance type Tree occurance
cust_mt 1..1
customer 0..unbound -
> ztest_cust( rfc ) 1..1
cname 1..1 -
> cname 0..1
cno 1..1 -
> cno 0..1
bank -
> bank 0..1
item : 0..unbound
code -
> code 0..1
name -
> name 0..1
location -
> location 0..1
1. Multiple banks possible for one customer
2. Multiple customers possible in datafile from mdm
Problem 1:Only one customer record from file is being sent to RFC thouth many records are in the file, the second, third .. and so on records not being sent to rfc.
Problem 2:
if add o.. unbound for the rfc occurance, <messages>,<message1> tags are getting added in message mapping, and no single customer record sent to rfc..
Your help is rewarded with good points.
Appreciate your help.
Thanks.
sravya.Hi VJ,
Thank you for the immediate reply.
one more thing, when i tried to change the occurences of ztest_cust( rfc) to 0..unbound,
I am not seeing the occurances updated in the imported rfc structure.
The following is the wsdl for rfc, could you please help me to add occurances 0..unbound.
Thanks a lot.
sraya.
<?xml version="1.0" encoding="ISO-8859-1"?>
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:rfc="urn:sap-com:document:sap:rfc:functions" name="ZTEST_CUST" targetNamespace="urn:sap-com:document:sap:rfc:functions">
<wsdl:documentation>
test for mdm
</wsdl:documentation>
<wsdl:types>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="urn:sap-com:document:sap:rfc:functions" targetNamespace="urn:sap-com:document:sap:rfc:functions">
<xsd:element name="ZTEST_CUST">
<xsd:complexType>
<xsd:all>
<xsd:element name="CNAME" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CNO" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="BANK" minOccurs="0">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="item" type="ZST_CUST" minOccurs="0" maxOccurs="unbounded" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:all>
</xsd:complexType>
</xsd:element>
<xsd:element name="ZTEST_CUST.Response">
<xsd:complexType>
<xsd:all>
<xsd:element name="BANK" minOccurs="0">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="item" type="ZST_CUST" minOccurs="0" maxOccurs="unbounded" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:all>
</xsd:complexType>
</xsd:element>
<xsd:complexType name="ZST_CUST">
<xsd:sequence>
<xsd:element name="CODE" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="60" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="NAME" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="60" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LOCATION" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="60" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</wsdl:types>
<wsdl:message name="ZTEST_CUST.Input">
<wsdl:part name="parameters" element="rfc:ZTEST_CUST" />
</wsdl:message>
<wsdl:message name="ZTEST_CUST.Output">
<wsdl:part name="parameters" element="rfc:ZTEST_CUST.Response" />
</wsdl:message>
<wsdl:portType name="ZTEST_CUST.PortType">
<wsdl:operation name="ZTEST_CUST">
<wsdl:input message="rfc:ZTEST_CUST.Input" />
<wsdl:output message="rfc:ZTEST_CUST.Output" />
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="ZTEST_CUST.SAPBinding" type="rfc:ZTEST_CUST.PortType">
<rfc:binding style="rfc" />
<rfc:type name="ZST_CUST">
<ifr:container xmlns:ifr="urn:sap-com:ifr:v2:metamodel" xmlns:xlink="http://www.w3.org/1999/xlink">
<ifr:descriptor>
<ifr:description language="EN">
test
</ifr:description>
</ifr:descriptor>
<ifr:properties>
<ifr:sourceSystem />
<ifr:sourceClient>
020
</ifr:sourceClient>
<ifr:release>
640
</ifr:release>
<ifr:category>
structure
</ifr:category>
<ifr:unicode1>
true
</ifr:unicode1>
<ifr:unicode2>
true
</ifr:unicode2>
<ifr:isFlatStructure>
true
</ifr:isFlatStructure>
</ifr:properties>
<ifr:definition>
<ifr:internalLength1>
180
</ifr:internalLength1>
<ifr:internalLength2>
360
</ifr:internalLength2>
<ifr:fields>
<ifr:field name="CODE" category="simple">
<ifr:descriptor />
<ifr:properties>
<ifr:helpValuesSupported>
false
</ifr:helpValuesSupported>
<ifr:offset1>
0
</ifr:offset1>
<ifr:offset2>
0
</ifr:offset2>
</ifr:properties>
<ifr:definition>
<ifr:scalarType>
<ifr:definition>
<ifr:type>
CHAR
</ifr:type>
<ifr:abapType>
C
</ifr:abapType>
<ifr:length>
60
</ifr:length>
<ifr:internalLength1>
60
</ifr:internalLength1>
<ifr:internalLength2>
120
</ifr:internalLength2>
<ifr:decimals>
0
</ifr:decimals>
</ifr:definition>
</ifr:scalarType>
</ifr:definition>
</ifr:field>
<ifr:field name="NAME" category="simple">
<ifr:descriptor />
<ifr:properties>
<ifr:helpValuesSupported>
false
</ifr:helpValuesSupported>
<ifr:offset1>
60
</ifr:offset1>
<ifr:offset2>
120
</ifr:offset2>
</ifr:properties>
<ifr:definition>
<ifr:scalarType>
<ifr:definition>
<ifr:type>
CHAR
</ifr:type>
<ifr:abapType>
C
</ifr:abapType>
<ifr:length>
60
</ifr:length>
<ifr:internalLength1>
60
</ifr:internalLength1>
<ifr:internalLength2>
120
</ifr:internalLength2>
<ifr:decimals>
0
</ifr:decimals>
</ifr:definition>
</ifr:scalarType>
</ifr:definition>
</ifr:field>
<ifr:field name="LOCATION" category="simple">
<ifr:descriptor />
<ifr:properties>
<ifr:helpValuesSupported>
false
</ifr:helpValuesSupported>
<ifr:offset1>
120
</ifr:offset1>
<ifr:offset2>
240
</ifr:offset2>
</ifr:properties>
<ifr:definition>
<ifr:scalarType>
<ifr:definition>
<ifr:type>
CHAR
</ifr:type>
<ifr:abapType>
C
</ifr:abapType>
<ifr:length>
60
</ifr:length>
<ifr:internalLength1>
60
</ifr:internalLength1>
<ifr:internalLength2>
120
</ifr:internalLength2>
<ifr:decimals>
0
</ifr:decimals>
</ifr:definition>
</ifr:scalarType>
</ifr:definition>
</ifr:field>
</ifr:fields>
</ifr:definition>
</ifr:container>
</rfc:type>
<wsdl:operation name="ZTEST_CUST">
<ifr:container xmlns:ifr="urn:sap-com:ifr:v2:metamodel" xmlns:xlink="http://www.w3.org/1999/xlink">
<ifr:descriptor>
<ifr:description language="EN">
test for mdm
</ifr:description>
</ifr:descriptor>
<ifr:properties>
<ifr:sourceSystem />
<ifr:sourceClient>
020
</ifr:sourceClient>
<ifr:release>
640
</ifr:release>
<ifr:package>
$TMP
</ifr:package>
<ifr:akhNode />
<ifr:released>
external
</ifr:released>
<ifr:outbound>
false
</ifr:outbound>
<ifr:synchronous>
true
</ifr:synchronous>
<ifr:asynchronous>
false
</ifr:asynchronous>
<ifr:unicode1>
true
</ifr:unicode1>
<ifr:unicode2>
true
</ifr:unicode2>
</ifr:properties>
<ifr:definition>
<ifr:parameters>
<ifr:parameter name="CNAME">
<ifr:descriptor>
<ifr:description language="EN">
Character Field Length = 10
</ifr:description>
</ifr:descriptor>
<ifr:definition>
<ifr:scalarType name="CHAR10">
<ifr:properties>
<ifr:helpValuesSupported>
false
</ifr:helpValuesSupported>
<ifr:fixedValuesListDefined>
false
</ifr:fixedValuesListDefined>
<ifr:mixedCaseSupported>
false
</ifr:mixedCaseSupported>
<ifr:signedNumber>
false
</ifr:signedNumber>
</ifr:properties>
<ifr:definition>
<ifr:type>
CHAR
</ifr:type>
<ifr:abapType>
C
</ifr:abapType>
<ifr:length>
10
</ifr:length>
<ifr:internalLength1>
10
</ifr:internalLength1>
<ifr:internalLength2>
20
</ifr:internalLength2>
<ifr:decimals>
0
</ifr:decimals>
<ifr:outputLength>
10
</ifr:outputLength>
</ifr:definition>
</ifr:scalarType>
</ifr:definition>
<ifr:properties>
<ifr:direction>
in
</ifr:direction>
<ifr:class>
import
</ifr:class>
<ifr:type>
scalar
</ifr:type>
<ifr:optional>
true
</ifr:optional>
<ifr:basedOnDictionaryReference>
true
</ifr:basedOnDictionaryReference>
</ifr:properties>
</ifr:parameter>
<ifr:parameter name="CNO">
<ifr:descriptor>
<ifr:description language="EN">
Character Field Length = 10
</ifr:description>
</ifr:descriptor>
<ifr:definition>
<ifr:scalarType name="CHAR10">
<ifr:properties>
<ifr:helpValuesSupported>
false
</ifr:helpValuesSupported>
<ifr:fixedValuesListDefined>
false
</ifr:fixedValuesListDefined>
<ifr:mixedCaseSupported>
false
</ifr:mixedCaseSupported>
<ifr:signedNumber>
false
</ifr:signedNumber>
</ifr:properties>
<ifr:definition>
<ifr:type>
CHAR
</ifr:type>
<ifr:abapType>
C
</ifr:abapType>
<ifr:length>
10
</ifr:length>
<ifr:internalLength1>
10
</ifr:internalLength1>
<ifr:internalLength2>
20
</ifr:internalLength2>
<ifr:decimals>
0
</ifr:decimals>
<ifr:outputLength>
10
</ifr:outputLength>
</ifr:definition>
</ifr:scalarType>
</ifr:definition>
<ifr:properties>
<ifr:direction>
in
</ifr:direction>
<ifr:class>
import
</ifr:class>
<ifr:type>
scalar
</ifr:type>
<ifr:optional>
true
</ifr:optional>
<ifr:basedOnDictionaryReference>
true
</ifr:basedOnDictionaryReference>
</ifr:properties>
</ifr:parameter>
<ifr:parameter name="BANK">
<ifr:descriptor>
<ifr:description language="EN">
test bank type
</ifr:description>
</ifr:descriptor>
<ifr:definition>
<ifr:complexType xmlns:xlink="http://www.w3.org/1999/xlink" name="ZST_CUST" type="structure" xlink:role="type" xlink:href="/Content?TYPE=type&NAME=ZST_CUST" />
</ifr:definition>
<ifr:properties>
<ifr:direction>
inout
</ifr:direction>
<ifr:class>
tables
</ifr:class>
<ifr:type>
structure
</ifr:type>
<ifr:optional>
true
</ifr:optional>
<ifr:basedOnDictionaryReference>
true
</ifr:basedOnDictionaryReference>
</ifr:properties>
</ifr:parameter>
</ifr:parameters>
</ifr:definition>
</ifr:container>
</wsdl:operation>
</wsdl:binding>
</wsdl:definitions> -
Print Crystal Report directly from C# without using Report Viewer
Hello All,
I need to print a crystal report directly to the printer without using ReportViewer in C#. I've a CrystalReport2(belowCode) which requires a query (Select * from JobHeader where JobNumber='J012345') to display all the data. I'm stuck with database connection
and putting all the data to DataAdapter in C# (Below Code). I also have 8 subreports in my CrystalReport2. Can somebody please give me hand on this? I'm struggling with it. Thanks.
Regards
using CrystalDecisions.CrystalReports.Engine;
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.Data.SqlClient;
namespace csharp_win_printtoprinter
/// <summary>
/// Summary description for Form1
/// </summary>
public class Form1 : System.Windows.Forms.Form
//CR Variables
ReportDocument crReportDocument;
private System.Windows.Forms.Button button1;
private System.Windows.Forms.PrintDialog printDialog1;
private System.Windows.Forms.Button button2;
private System.Drawing.Printing.PrintDocument printDocument1;
private CrystalDecisions.Windows.Forms.CrystalReportViewer crystalReportViewer1;
private CrystalReport1 CrystalReport11;
private Chart Chart1;
/// <summary>
/// Required designer variable
/// </summary>
private System.ComponentModel.Container components = null;
public Form1()
// Required for Windows Form Designer support
InitializeComponent();
// TODO: Add any constructor code after InitializeComponent call
/// <summary>
/// Clean up any resources being used
/// </summary>
protected override void Dispose( bool disposing )
if( disposing )
if (components != null)
components.Dispose();
base.Dispose( disposing );
#region Windows Form Designer generated code
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor
/// </summary>
private void InitializeComponent()
this.button1 = new System.Windows.Forms.Button();
this.printDialog1 = new System.Windows.Forms.PrintDialog();
this.button2 = new System.Windows.Forms.Button();
this.printDocument1 = new System.Drawing.Printing.PrintDocument();
this.crystalReportViewer1 = new CrystalDecisions.Windows.Forms.CrystalReportViewer();
this.Chart1 = new csharp_win_printtoprinter.Chart();
this.CrystalReport11 = new csharp_win_printtoprinter.CrystalReport1();
this.SuspendLayout();
// button1
this.button1.Font = new System.Drawing.Font("Microsoft Sans Serif", 16F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
this.button1.Location = new System.Drawing.Point(32, 56);
this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(160, 104);
this.button1.TabIndex = 0;
this.button1.Text = "Print Report No Choose Printer";
this.button1.Click += new System.EventHandler(this.button1_Click);
// button2
this.button2.Font = new System.Drawing.Font("Microsoft Sans Serif", 15.75F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0)));
this.button2.Location = new System.Drawing.Point(272, 56);
this.button2.Name = "button2";
this.button2.Size = new System.Drawing.Size(160, 104);
this.button2.TabIndex = 1;
this.button2.Text = "Choose Printer";
this.button2.Click += new System.EventHandler(this.button2_Click);
// crystalReportViewer1
this.crystalReportViewer1.ActiveViewIndex = 0;
this.crystalReportViewer1.BorderStyle = System.Windows.Forms.BorderStyle.FixedSingle;
this.crystalReportViewer1.Cursor = System.Windows.Forms.Cursors.Default;
this.crystalReportViewer1.Location = new System.Drawing.Point(47, 188);
this.crystalReportViewer1.Name = "crystalReportViewer1";
this.crystalReportViewer1.ReportSource = this.CrystalReport11;
this.crystalReportViewer1.Size = new System.Drawing.Size(903, 296);
this.crystalReportViewer1.TabIndex = 2;
// Form1
this.AutoScaleBaseSize = new System.Drawing.Size(5, 13);
this.ClientSize = new System.Drawing.Size(1164, 505);
this.Controls.Add(this.crystalReportViewer1);
this.Controls.Add(this.button2);
this.Controls.Add(this.button1);
this.Name = "Form1";
this.Text = "Form1";
this.Load += new System.EventHandler(this.Form1_Load);
this.ResumeLayout(false);
#endregion
/// <summary>
/// The main entry point for the application
/// </summary>
[STAThread]
static void Main()
Application.Run(new Form1());
private void button1_Click(object sender, System.EventArgs e)
crReportDocument = new ReportDocument();
//Create an instance of a report
crReportDocument = new CrystalReport2();
//Use error handling in case an error occurs
try
//Set the printer name to print the report to. By default the sample
//report does not have a defult printer specified. This will tell the
//engine to use the specified printer to print the report. Print out
//a test page (from Printer properties) to get the correct value.
System.Drawing.Printing.PrintDocument printDocument = new System.Drawing.Printing.PrintDocument();
crReportDocument.PrintOptions.PrinterName = printDocument.PrinterSettings.PrinterName;
//Start the printing process. Provide details of the print job
//using the arguments.
crReportDocument.PrintToPrinter(0 ,true , 1, 1);
//Let the user know that the print job is completed
MessageBox.Show("Report finished printing!");
catch(Exception err)
MessageBox.Show(err.ToString(), "Unexpected exception");
private void Form1_Load(object sender, System.EventArgs e)
private void button2_Click(object sender, System.EventArgs e)
//Open the PrintDialog
this.printDialog1.Document = this.printDocument1;
DialogResult dr = this.printDialog1.ShowDialog();
if(dr == DialogResult.OK)
//Get the Copy times
int nCopy = this.printDocument1.PrinterSettings.Copies;
//Get the number of Start Page
int sPage = this.printDocument1.PrinterSettings.FromPage;
//Get the number of End Page
int ePage = this.printDocument1.PrinterSettings.ToPage;
string PrinterName = this.printDocument1.PrinterSettings.PrinterName;
crReportDocument = new ReportDocument();
//Create an instance of a report
crReportDocument = new Chart();
try
//Set the printer name to print the report to. By default the sample
//report does not have a defult printer specified. This will tell the
//engine to use the specified printer to print the report. Print out
//a test page (from Printer properties) to get the correct value.
crReportDocument.PrintOptions.PrinterName = PrinterName;
//Start the printing process. Provide details of the print job
//using the arguments.
crReportDocument.PrintToPrinter(nCopy, false, sPage, ePage);
//Let the user know that the print job is completed
MessageBox.Show("Report finished printing!");
catch(Exception err)
MessageBox.Show(err.ToString());1. This is a VB.Net forum not a Visual C# forum. For Visual C# questions try this forum.
Visual C#
2. Crystal Reports are not supported by Microsoft. Therefore, unless somebody responding in the Visual C# forum has experience with whichever version of Crystal Reports you are using, you will probably not receive an answer in the Visual C# forum. SAP has
their own assistance for Crystal Reports using Visual Studio. You can try to find an appropriate forum to ask questions in at SAP in the below link.
SAP Community Network
La vida loca
Maybe you are looking for
-
Problem with Multiple Versions of the Same Activex
Hi, I Installed some "ABC" Activex 9.5 version and 10.1 version in the system. I have ASP.net webpage which should use only 9.5 version of Activex. But by default 10.1 version is active and invoking by webpage. Is there any way to enforce from webpa
-
Error while activating transforamtion
Hi, Facing error while activating the transformation Error is : No source parameter is used. No target field is assigned. We are getting the data from the flat file, i had tried assiging the fields in the transformation. but those are the amount fil
-
How can I get iTunes to recognize information imported from media as audiobook vs album?
I imported a series of audio cd's that contained lecture material into iTunes. It sees these disks as albums not as a single set of audiobook portions. Therefore, everytime I listen to a portion of the lecture material, I have to remember exactly w
-
New Retina Macbook Pro...no audio through HDMI
I ordered the Amazon HDMI cable (http://www.amazon.com/AmazonBasics-High-Speed-HDMI-Cable-Meters/dp/B003L1ZYYM/re f=sr_1_1?ie=UTF8&qid=1365112977&sr=8-1&keywords=hdmi) which supports Video, Audio, 3D, etc. I have my HDTV hooked up as a second display
-
Exchange password not saved on Mountain Lion
I keep getting an error mail cannot be sent from Outlook on my Macbook Pro. I can reset it but I get the same message 5 or 10 minutes later. Anyone seen this issue?