Sending Failure. I can't send, reply or forward an email with attachment or picture.

I have a Galaxy S5. When I try to send, forward or reply to an email with an attachment or picture it gets stuck in my outbox with a final message on my notification page of "sending failure".  I can receive any email with pics or attachments. I have removed and re added my email accounts as well as cleared the cache without any luck.  Any suggestions?
Thanks in advance!

Try doing this, uninstall your email app then power down & remove battery and SIM card. Next re-power phone and do a regular reset of the phone (not a restart)  with SIM installed. This will be listed under settings, backup and restore then tap Reset settings. now reinstall email app and setup your account. This in a normal working phone will clear most email problems along with correct account settings.

Similar Messages

  • "Sending Failure". Can't send, forward or reply to email with attachments or pictures

    I have a Galaxy S5. When I try to send, forward or reply to an email with an attachment or picture it gets stuck in my outbox with a final message on my notification page of "sending failure". I have removed and re added my email accounts as well as cleared the cache without any luck.  Any suggestions?
    Thanks in advance!

        kpgrl,
    Let's get your emails back in business! Have you tried installing a third party app to use for your email? Have you removed the email and readded it? Please share details.
    KarenC_VZW
    Follow us on Twitter @VZWSupport

  • The bottom bar on my mail has disappeared which means I can't create, reply or forward to an email. Any ideas how to get it back? Touching the screen at the bottom doesn't work!

    The bottom bar in my email seems to have disappeared which means I can't create, reply or forward any emails. Any auggestions to how to get it back? Touching the bottom of the screen doesn't work. Thanks.

    Close all apps in the Multitasking Drawer; Double Tap Home Button to open drawer, Swipe up on each app to close it. Repeat until all apps are closed, touch home screen.
    Restart phone, hold both Home and Power/Sleep buttons down at the same time, continue to hold them down until the Apple Logo appears, Release both buttons and wait for phone to restart.
    Check email app to see if bottom bar and new email icon have come back.
    If not, delete the email account in settings and then add it back in again.
    If mail still not working as it should, you may try doing a Reset All Settings reset in Settings => General => Reset => Reset All Settings.  You won't lose any data, music, apps, videos,pictures, etc.  But you will have to go back in and turn on or off any settings you changed on your phone because everything will be set back to factory defaults.

  • How i can send email with attachment ?

    any body can help me ..............??????????????????

    Hello,
    please, use "Search" utility in the forum before ask something like this...
    I've just tried with :
    "send email with attachment"
    and ... you have the solution in the first result...
    Regards,
    Jose.

  • Why do i keep getting "Message Send Failure" every time I send pictures on iMessage? All are sent to other iPhone/iPad users.

    For a few months now, I've been getting "Message Send Failure" every time I send pictures to other Apple devices (iPhones, iPads, Macs), despite the recipient receiving them. So, even though the pictures are going through, the "Message Send Failure" notice keeps showing up. I checked with other people who have Apple devices and they also encountered the same issue whenever they send pictures (usually send an email to make sure it was received).  I thought when iOS 7.1.1 came out that it would fix this issue. Has anyone else encountered the same issue? Thanks!

    I started getting the error on my iPhone 5 (iOS 7.1.x) several weeks ago - if not a month ago. Today I finally decided to run through a wholesale sign-out/sign-in process on all my devices (iMac, MacBook, iPad 1, iPad 3 and iPhone5) and it worked!
    I signed out of iMessage/Messages on all devices. I also deleted my iCloud accounts on all my devices (make sure you tell the software to keep local copies when you are prompted - relax, it all stays in the cloud, too) Then I signed back in to iMessage/Messages and then re-added iCloud accounts all around. I just sent a message with a photo attachment and did not get the "Not Delivered" message - yay!
    (FYI - even though I received the error every time I sent a message with an image attachment, the message still went through - very, very happy, though to finally get rid of the message...)

  • "Message Send Failure" every time I send pictures on message?

    "Message Send Failure" every time I send pictures on message? Help.  This is also happening on my husband's phone.  I have the 5C and he has the 5S.  This all started about 4-5 weeks ago.  The picture do however go through.

    There have been many, many reports of this lately so I believe it's not anything you're doing.

  • When send message it's says " messagae send failure" but message already send.why?

    when send message it's says " message send failure" but message alredy send.why?

    Go through the troubleshooting steps under "If you see 'Waiting for Activation'..." in this article: http://support.apple.com/kb/ts4268.

  • HOW TO SEND A HEBREW EMAIL WITH ATTACHMENT USING DEMO_MAIL

    Hello All,
    This is Not a question , just attaching something I've implemented and might be interesting for few of us,
    This package I'm attaching allows to send Hebrew Language email + attaching files to it.
    This package is based on demo_mail package (combined here but you can search at google for more example information if needed).
    My Package is supplied as is , for any specific information regarding it , please contact me directly at : [email protected] or POST here.
    * Please also note , that this package allow file to be attach via URL (meaning you will have to define a link to this file, if you would like to implement a link to a local file , e.g : c:\temp\myfile , you will have to customize the package your self with database directories option etc ...)
    First I will attach an example of how to use it :
    ==================================
    begin
    demo_mail_heb.send_html_mail_attach(p_sender => '[email protected]',
    p_recipients => '[email protected]',
    p_subject => 'שלום וברכה עולם',
    p_data => '<hr><b>בוקר טוב</b><hr>',
    p_file_name => 'but_choose_file.gif',
    p_file_mime_type => 'application/pdf',
    p_file_URL => 'http://10.172.246.160:7777/i/but_choose_file.gif');
    end;
    Second Here is the Package (please note you will have to modify few settings in order to enable it , such as mail server address ..etc)
    ======================================================================================
    CREATE OR REPLACE PACKAGE demo_mail_heb IS
    ----------------------- Customizable Section -----------------------
    -- Customize the SMTP host, port and your domain name below.
    smtp_host VARCHAR2(256) := 'mail.oracle.com';
    smtp_port PLS_INTEGER := 25;
    smtp_domain VARCHAR2(256) := 'oracle.com';
    -- Customize the signature that will appear in the email's MIME header.
    -- Useful for versioning.
    MAILER_ID CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
    --------------------- End Customizable Section ---------------------
    -- A unique string that demarcates boundaries of parts in a multi-part email
    -- The string should not appear inside the body of any part of the email.
    -- Customize this if needed or generate this randomly dynamically.
    BOUNDARY CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
    FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
    LAST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
    utl_tcp.CRLF;
    -- A MIME type that denotes multi-part email (MIME) messages.
    MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
    BOUNDARY || '"';
    MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER := 76 / 4 * 3;
    -- Sent clear Html Email
    procedure send_html_mail (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default null,
    p_mime_type in varchar2 default 'text/html; charset=windows-1255');
    -- Sent Html Email with Attachment
    procedure send_html_mail_attach (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
    p_mime_type in varchar2 default demo_mail_heb.MULTIPART_MIME_TYPE,
    p_file_name in varchar2 default 'but_choose_file.gif',
    p_file_mime_type in varchar2 default 'application/pdf',
    p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif');
    -- A simple email API for sending email in plain text in a single call.
    -- The format of an email address is one of these:
    -- someone@some-domain
    -- "Someone at some domain" <someone@some-domain>
    -- Someone at some domain <someone@some-domain>
    -- The recipients is a list of email addresses separated by
    -- either a "," or a ";"
    PROCEDURE mail(sender IN VARCHAR2,
              recipients IN VARCHAR2,
              subject IN VARCHAR2,
              message IN VARCHAR2);
    -- Extended email API to send email in HTML or plain text with no size limit.
    -- First, begin the email by begin_mail(). Then, call write_text() repeatedly
    -- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
    -- email in non-ASCII or multi-byte character set. End the email with
    -- end_mail().
    FUNCTION begin_mail(sender IN VARCHAR2,
              recipients IN VARCHAR2,
              subject IN VARCHAR2,
              mime_type IN VARCHAR2 DEFAULT 'text/plain',
              priority IN PLS_INTEGER DEFAULT NULL)
              RETURN utl_smtp.connection;
    -- Write email body in ASCII
    PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
              message IN VARCHAR2);
    -- Write email body in non-ASCII (including multi-byte). The email body
    -- will be sent in the database character set.
    PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
                   message IN VARCHAR2);
    -- Write email body in binary
    PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
              message IN RAW);
    -- APIs to send email with attachments. Attachments are sent by sending
    -- emails in "multipart/mixed" MIME format. Specify that MIME format when
    -- beginning an email with begin_mail().
    -- Send a single text attachment.
    PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
                   data IN VARCHAR2,
                   mime_type IN VARCHAR2 DEFAULT 'text/plain',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
              last IN BOOLEAN DEFAULT FALSE);
    -- Send a binary attachment. The attachment will be encoded in Base-64
    -- encoding format.
    PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
                   data IN RAW,
                   mime_type IN VARCHAR2 DEFAULT 'application/octet',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
                   last IN BOOLEAN DEFAULT FALSE);
    -- Send an attachment with no size limit. First, begin the attachment
    -- with begin_attachment(). Then, call write_text repeatedly to send
    -- the attachment piece-by-piece. If the attachment is text-based but
    -- in non-ASCII or multi-byte character set, use write_mb_text() instead.
    -- To send binary attachment, the binary content should first be
    -- encoded in Base-64 encoding format using the demo package for 8i,
    -- or the native one in 9i. End the attachment with end_attachment.
    PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                   mime_type IN VARCHAR2 DEFAULT 'text/plain',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
                   transfer_enc IN VARCHAR2 DEFAULT NULL);
    -- End the attachment.
    PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                   last IN BOOLEAN DEFAULT FALSE);
    -- End the email.
    PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
    -- Extended email API to send multiple emails in a session for better
    -- performance. First, begin an email session with begin_session.
    -- Then, begin each email with a session by calling begin_mail_in_session
    -- instead of begin_mail. End the email with end_mail_in_session instead
    -- of end_mail. End the email session by end_session.
    FUNCTION begin_session RETURN utl_smtp.connection;
    -- Begin an email in a session.
    PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
                        sender IN VARCHAR2,
                        recipients IN VARCHAR2,
                        subject IN VARCHAR2,
    --                     mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
              mime_type IN VARCHAR2 DEFAULT 'text/plain',
                        priority IN PLS_INTEGER DEFAULT NULL);
    -- End an email in a session.
    PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
    -- End an email session.
    PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
    END;
    CREATE OR REPLACE PACKAGE BODY demo_mail_heb IS
    -- Sent clear Html Email
    procedure send_html_mail (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default null,
    p_mime_type in varchar2 default 'text/html; charset=windows-1255')
    Is
    conn utl_smtp.connection;
    BEGIN
    conn := demo_mail_heb.begin_mail(
    sender => p_sender,
    recipients => p_recipients,
    subject => p_subject,
    mime_type => p_mime_type);
    demo_mail_heb.write_text(
    conn => conn,
    message => p_data);
    demo_mail_heb.end_mail( conn => conn );
    END;
    -- Sent Html Email with Attachment
    procedure send_html_mail_attach (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
    p_mime_type in varchar2 default demo_mail_heb.MULTIPART_MIME_TYPE,
    p_file_name in varchar2 default 'but_choose_file.gif',
    p_file_mime_type in varchar2 default 'application/pdf',
    p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif')
    is
    conn utl_smtp.connection;
    req utl_http.req;
    resp utl_http.resp;
    data RAW(200);
    begin
    conn := demo_mail_heb.begin_mail(
    sender => p_sender,
    recipients => p_recipients,
    subject => p_subject,
    mime_type => p_mime_type);
    demo_mail_heb.attach_text(
    conn => conn,
    data => p_data,
    mime_type => 'text/html');
    demo_mail_heb.begin_attachment(
    conn => conn,
    mime_type => p_file_mime_type,
    inline => TRUE,
    filename => p_file_name,
    transfer_enc => 'base64');
    -- In writing Base-64 encoded text following the MIME format below,
    -- the MIME format requires that a long piece of data must be splitted
    -- into multiple lines and each line of encoded data cannot exceed
    -- 80 characters, including the new-line characters. Also, when
    -- splitting the original data into pieces, the length of each chunk
    -- of data before encoding must be a multiple of 3, except for the
    -- last chunk. The constant demo_mail_heb.MAX_BASE64_LINE_WIDTH
    -- (76 / 4 * 3 = 57) is the maximum length (in bytes) of each chunk
    -- of data before encoding.
    Utl_Http.set_proxy('www-proxy.us.oracle.com', 'oracle.com');
    req := utl_http.begin_request(p_file_URL);
    resp := utl_http.get_response(req);
    BEGIN
    LOOP
    utl_http.read_raw(resp, data, demo_mail_heb.MAX_BASE64_LINE_WIDTH);
    demo_mail_heb.write_raw(
    conn => conn,
    message => utl_encode.base64_encode(data));
    END LOOP;
    EXCEPTION
    WHEN utl_http.end_of_body THEN
    utl_http.end_response(resp);
    END;
    demo_mail_heb.end_attachment( conn => conn );
    demo_mail_heb.end_mail( conn => conn );
    end;
    -- Return the next email address in the list of email addresses, separated
    -- by either a "," or a ";". The format of mailbox may be in one of these:
    -- someone@some-domain
    -- "Someone at some domain" <someone@some-domain>
    -- Someone at some domain <someone@some-domain>
    FUNCTION get_address(addr_list IN OUT VARCHAR2) RETURN VARCHAR2 IS
    addr VARCHAR2(256);
    i pls_integer;
    FUNCTION lookup_unquoted_char(str IN VARCHAR2,
                        chrs IN VARCHAR2) RETURN pls_integer AS
    c VARCHAR2(5);
    i pls_integer;
    len pls_integer;
    inside_quote BOOLEAN;
    BEGIN
    inside_quote := false;
    i := 1;
    len := length(str);
    WHILE (i <= len) LOOP
         c := substr(str, i, 1);
         IF (inside_quote) THEN
         IF (c = '"') THEN
         inside_quote := false;
         ELSIF (c = '\') THEN
         i := i + 1; -- Skip the quote character
         END IF;
         GOTO next_char;
         END IF;
         IF (c = '"') THEN
         inside_quote := true;
         GOTO next_char;
         END IF;
         IF (instr(chrs, c) >= 1) THEN
         RETURN i;
         END IF;
         <<next_char>>
         i := i + 1;
    END LOOP;
    RETURN 0;
    END;
    BEGIN
    addr_list := ltrim(addr_list);
    i := lookup_unquoted_char(addr_list, ',;');
    IF (i >= 1) THEN
    addr := substr(addr_list, 1, i - 1);
    addr_list := substr(addr_list, i + 1);
    ELSE
    addr := addr_list;
    addr_list := '';
    END IF;
    i := lookup_unquoted_char(addr, '<');
    IF (i >= 1) THEN
    addr := substr(addr, i + 1);
    i := instr(addr, '>');
    IF (i >= 1) THEN
         addr := substr(addr, 1, i - 1);
    END IF;
    END IF;
    RETURN addr;
    END;
    -- Write a MIME header
    PROCEDURE write_mime_header(conn IN OUT NOCOPY utl_smtp.connection,
                   name IN VARCHAR2,
                   value IN VARCHAR2) IS
    BEGIN
    -- utl_smtp.write_data(conn, name || ': ' || value || utl_tcp.CRLF);
    utl_smtp.write_raw_data(conn, UTL_RAW.CAST_TO_RAW(name || ': ' ||value || utl_tcp.CRLF));
    END;
    -- Mark a message-part boundary. Set <last> to TRUE for the last boundary.
    PROCEDURE write_boundary(conn IN OUT NOCOPY utl_smtp.connection,
                   last IN BOOLEAN DEFAULT FALSE) AS
    BEGIN
    IF (last) THEN
    utl_smtp.write_data(conn, LAST_BOUNDARY);
    ELSE
    utl_smtp.write_data(conn, FIRST_BOUNDARY);
    END IF;
    END;
    PROCEDURE mail(sender IN VARCHAR2,
              recipients IN VARCHAR2,
              subject IN VARCHAR2,
              message IN VARCHAR2) IS
    conn utl_smtp.connection;
    BEGIN
    conn := begin_mail(sender, recipients, subject);
    write_text(conn, message);
    end_mail(conn);
    END;
    FUNCTION begin_mail(sender IN VARCHAR2,
              recipients IN VARCHAR2,
              subject IN VARCHAR2,
              mime_type IN VARCHAR2 DEFAULT 'text/plain',
              priority IN PLS_INTEGER DEFAULT NULL)
              RETURN utl_smtp.connection IS
    conn utl_smtp.connection;
    BEGIN
    conn := begin_session;
    begin_mail_in_session(conn, sender, recipients, subject, mime_type,
    priority);
    RETURN conn;
    END;
    PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
              message IN VARCHAR2) IS
    BEGIN
    utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(CONVERT(message,'IW8ISO8859P8')));
    END;
    PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
                   message IN VARCHAR2) IS
    BEGIN
    utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
    END;
    PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
              message IN RAW) IS
    BEGIN
    utl_smtp.write_raw_data(conn, message);
    END;
    PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
                   data IN VARCHAR2,
                   mime_type IN VARCHAR2 DEFAULT 'text/plain',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
              last IN BOOLEAN DEFAULT FALSE) IS
    BEGIN
    begin_attachment(conn, mime_type, inline, filename);
    write_text(conn, data);
    end_attachment(conn, last);
    END;
    PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
                   data IN RAW,
                   mime_type IN VARCHAR2 DEFAULT 'application/octet',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
                   last IN BOOLEAN DEFAULT FALSE) IS
    i PLS_INTEGER;
    len PLS_INTEGER;
    BEGIN
    begin_attachment(conn, mime_type, inline, filename, 'base64');
    -- Split the Base64-encoded attachment into multiple lines
    i := 1;
    len := utl_raw.length(data);
    WHILE (i < len) LOOP
    IF (i + MAX_BASE64_LINE_WIDTH < len) THEN
         utl_smtp.write_raw_data(conn,
         utl_encode.base64_encode(utl_raw.substr(data, i,
         MAX_BASE64_LINE_WIDTH)));
    ELSE
         utl_smtp.write_raw_data(conn,
         utl_encode.base64_encode(utl_raw.substr(data, i)));
    END IF;
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    i := i + MAX_BASE64_LINE_WIDTH;
    END LOOP;
    end_attachment(conn, last);
    END;
    PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                   mime_type IN VARCHAR2 DEFAULT 'text/plain',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
                   transfer_enc IN VARCHAR2 DEFAULT NULL) IS
    BEGIN
    write_boundary(conn);
    write_mime_header(conn, 'Content-Type', mime_type);
    IF (filename IS NOT NULL) THEN
    IF (inline) THEN
         write_mime_header(conn, 'Content-Disposition',
         'inline; filename="'||filename||'"');
    ELSE
         write_mime_header(conn, 'Content-Disposition',
         'attachment; filename="'||filename||'"');
    END IF;
    END IF;
    IF (transfer_enc IS NOT NULL) THEN
    write_mime_header(conn, 'Content-Transfer-Encoding', transfer_enc);
    END IF;
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    END;
    PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                   last IN BOOLEAN DEFAULT FALSE) IS
    BEGIN
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    IF (last) THEN
    write_boundary(conn, last);
    END IF;
    END;
    PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) IS
    BEGIN
    end_mail_in_session(conn);
    end_session(conn);
    END;
    FUNCTION begin_session RETURN utl_smtp.connection IS
    conn utl_smtp.connection;
    BEGIN
    -- open SMTP connection
    conn := utl_smtp.open_connection(smtp_host, smtp_port);
    utl_smtp.helo(conn, smtp_domain);
    RETURN conn;
    END;
    PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
                        sender IN VARCHAR2,
                        recipients IN VARCHAR2,
                        subject IN VARCHAR2,
                        mime_type IN VARCHAR2 DEFAULT 'text/plain',
                   --     mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
                        priority IN PLS_INTEGER DEFAULT NULL) IS
    my_recipients VARCHAR2(32767) := recipients;
    my_sender VARCHAR2(32767) := sender;
    BEGIN
    -- Specify sender's address (our server allows bogus address
    -- as long as it is a full email address ([email protected]).
    utl_smtp.mail(conn, get_address(my_sender));
    -- Specify recipient(s) of the email.
    WHILE (my_recipients IS NOT NULL) LOOP
    utl_smtp.rcpt(conn, get_address(my_recipients));
    END LOOP;
    -- Start body of email
    utl_smtp.open_data(conn);
    -- Set "From" MIME header
    write_mime_header(conn, 'From', sender);
    -- Set "To" MIME header
    write_mime_header(conn, 'To', recipients);
    -- Set "Subject" MIME header
    write_mime_header(conn, 'Subject', subject);
    -- Set "Content-Type" MIME header
    write_mime_header(conn, 'Content-Type', mime_type);
    -- Set "X-Mailer" MIME header
    write_mime_header(conn, 'X-Mailer', MAILER_ID);
    -- Set priority:
    -- High Normal Low
    -- 1 2 3 4 5
    IF (priority IS NOT NULL) THEN
    write_mime_header(conn, 'X-Priority', priority);
    END IF;
    -- Send an empty line to denotes end of MIME headers and
    -- beginning of message body.
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    IF (mime_type LIKE 'multipart/mixed%') THEN
    write_text(conn, 'This is a multi-part message in MIME format.' ||
         utl_tcp.crlf);
    END IF;
    END;
    PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection) IS
    BEGIN
    utl_smtp.close_data(conn);
    END;
    PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection) IS
    BEGIN
    utl_smtp.quit(conn);
    END;
    END;

    Hello All,
    Small modification - use this package and not the above
    HERE IS A WORKING CODE FOR SENDING HEBREW MESSAGES (INCLUDING SUBJECT IN UTF-8 APPEAR IN ALL EMAIL CLIENTS I HAVE CHECKED) + ATTACHMENTS
    Code attached below is supplied as is with no support. anyhow if help is needed , please contact me via [email protected]
    ============================================================================
    CREATE OR REPLACE PACKAGE demo_mail_heb IS
    ----------------------- Customizable Section -----------------------
    -- Customize the SMTP host, port and your domain name below.
    smtp_host VARCHAR2(256) := pst_ajax.getParameter('EMAIL_SMTP_HOST');
    smtp_port PLS_INTEGER := pst_ajax.getParameter('EMAIL_SMTP_PORT');
    smtp_domain VARCHAR2(256) := pst_ajax.getParameter('EMAIL_SMTP_DOMAIN');
    -- Customize the signature that will appear in the email's MIME header.
    -- Useful for versioning.
    MAILER_ID CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
    --------------------- End Customizable Section ---------------------
    -- A unique string that demarcates boundaries of parts in a multi-part email
    -- The string should not appear inside the body of any part of the email.
    -- Customize this if needed or generate this randomly dynamically.
    BOUNDARY CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
    FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
    LAST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
    utl_tcp.CRLF;
    -- A MIME type that denotes multi-part email (MIME) messages.
    MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
    BOUNDARY || '"';
    MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER := 76 / 4 * 3;
    -- Sent clear Html Email
    procedure send_html_mail (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default null,
    p_mime_type in varchar2 default 'text/html; charset=windows-1255');
    -- Sent Html Email with Attachment
    procedure send_html_mail_attach (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
    p_mime_type in varchar2 default 'text/html; charset=windows-1255',
    p_file_name in varchar2 default 'but_choose_file.gif',
    p_file_mime_type in varchar2 default 'application/pdf',
    p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif');
    -- A simple email API for sending email in plain text in a single call.
    -- The format of an email address is one of these:
    -- someone@some-domain
    -- "Someone at some domain" <someone@some-domain>
    -- Someone at some domain <someone@some-domain>
    -- The recipients is a list of email addresses separated by
    -- either a "," or a ";"
    PROCEDURE mail(sender IN VARCHAR2,
              recipients IN VARCHAR2,
              subject IN VARCHAR2,
              message IN VARCHAR2);
    -- Extended email API to send email in HTML or plain text with no size limit.
    -- First, begin the email by begin_mail(). Then, call write_text() repeatedly
    -- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
    -- email in non-ASCII or multi-byte character set. End the email with
    -- end_mail().
    FUNCTION begin_mail(sender IN VARCHAR2,
              recipients IN VARCHAR2,
              subject IN VARCHAR2,
              mime_type IN VARCHAR2 DEFAULT 'text/plain',
              priority IN PLS_INTEGER DEFAULT NULL)
              RETURN utl_smtp.connection;
    -- Write email body in ASCII
    PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
              message IN VARCHAR2);
    -- Write email body in non-ASCII (including multi-byte). The email body
    -- will be sent in the database character set.
    PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
                   message IN VARCHAR2);
    -- Write email body in binary
    PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
              message IN RAW);
    -- APIs to send email with attachments. Attachments are sent by sending
    -- emails in "multipart/mixed" MIME format. Specify that MIME format when
    -- beginning an email with begin_mail().
    -- Send a single text attachment.
    PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
                   data IN VARCHAR2,
                   mime_type IN VARCHAR2 DEFAULT 'text/plain',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
              last IN BOOLEAN DEFAULT FALSE);
    -- Send a binary attachment. The attachment will be encoded in Base-64
    -- encoding format.
    PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
                   data IN RAW,
                   mime_type IN VARCHAR2 DEFAULT 'application/octet',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
                   last IN BOOLEAN DEFAULT FALSE);
    -- Send an attachment with no size limit. First, begin the attachment
    -- with begin_attachment(). Then, call write_text repeatedly to send
    -- the attachment piece-by-piece. If the attachment is text-based but
    -- in non-ASCII or multi-byte character set, use write_mb_text() instead.
    -- To send binary attachment, the binary content should first be
    -- encoded in Base-64 encoding format using the demo package for 8i,
    -- or the native one in 9i. End the attachment with end_attachment.
    PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                   mime_type IN VARCHAR2 DEFAULT 'text/plain',
                   inline IN BOOLEAN DEFAULT TRUE,
                   filename IN VARCHAR2 DEFAULT NULL,
                   transfer_enc IN VARCHAR2 DEFAULT NULL);
    -- End the attachment.
    PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
                   last IN BOOLEAN DEFAULT FALSE);
    -- End the email.
    PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
    -- Extended email API to send multiple emails in a session for better
    -- performance. First, begin an email session with begin_session.
    -- Then, begin each email with a session by calling begin_mail_in_session
    -- instead of begin_mail. End the email with end_mail_in_session instead
    -- of end_mail. End the email session by end_session.
    FUNCTION begin_session RETURN utl_smtp.connection;
    -- Handling the Email Subject Line
    function mimeheader_encode(
    p_str varchar2
    , p_charset varchar2 := 'UTF-8') return varchar2;
    -- Begin an email in a session.
    PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
                        sender IN VARCHAR2,
                        recipients IN VARCHAR2,
                        subject IN VARCHAR2,
    --                     mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
              mime_type IN VARCHAR2 DEFAULT 'text/plain',
                        priority IN PLS_INTEGER DEFAULT NULL);
    -- End an email in a session.
    PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
    -- End an email session.
    PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
    END;
    CREATE OR REPLACE PACKAGE BODY demo_mail_heb IS
    -- Sent clear Html Email
    procedure send_html_mail (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default null,
    p_mime_type in varchar2 default 'text/html; charset=windows-1255')
    Is
    conn utl_smtp.connection;
    BEGIN
    conn := demo_mail_heb.begin_mail(
    sender => p_sender,
    recipients => p_recipients,
    subject => p_subject,
    mime_type => 'text/html; charset=UTF-8');--p_mime_type);
    demo_mail_heb.write_text(
    conn => conn,
    message => p_data);
    demo_mail_heb.end_mail( conn => conn );
    END;
    -- Sent Html Email with Attachment
    procedure send_html_mail_attach (p_sender in varchar2 default null,
    p_recipients in varchar2 default null,
    p_subject in varchar2 default null,
    p_data in varchar2 default '<b>áå÷ø èåá òåìí - áãé÷ä</b',
    p_mime_type in varchar2 default 'text/html; charset=windows-1255',
    p_file_name in varchar2 default 'but_choose_file.gif',
    p_file_mime_type in varchar2 default 'application/pdf',
    p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif')
    is
    conn utl_smtp.connection;
    req utl_http.req;
    resp utl_http.resp;
    data RAW(200);
    v_mime_type varchar2(32767):=demo_mail.MULTIPART_MIME_TYPE;
    begin
    conn := demo_mail_heb.begin_mail(
    sender => p_sender,
    recipients => p_recipients,
    subject => p_subject,
    mime_type => v_mime_type);
    demo_mail_heb.attach_text(
    conn => conn,
    data => p_data,
    mime_type => 'text/html');
    demo_mail_heb.begin_attachment(
    conn => conn,
    mime_type => p_file_mime_type,
    inline => TRUE,
    filename => p_file_name,
    transfer_enc => 'base64');
    -- In writing Base-64 encoded text following the MIME format below,
    -- the MIME format requires that a long piece of data must be splitted
    -- into multiple lines and each line of encoded data cannot exceed
    -- 80 characters, including the new-line characters. Also, when
    -- splitting the original data into pieces, the length of each chunk
    -- of data before encoding must be a multiple of 3, except for the
    -- last chunk. The constant demo_mail_heb.MAX_BASE64_LINE_WIDTH
    -- (76 / 4 * 3 = 57) is the maximum length (in bytes) of each chunk
    -- of data before encoding.
    req := utl_http.begin_request(p_file_URL);
    resp := utl_http.get_response(req);
    BEGIN
    LOOP
    utl_http.read_raw(resp, data, demo_mail_heb.MAX_BASE64_LINE_WIDTH);
    demo_mail_heb.write_raw(
    conn => conn,
    message => utl_encode.base64_encode(data));
    END LOOP;
    EXCEPTION
    WHEN utl_http.end_of_body THEN
    utl_http.end_response(resp);
    END;
    demo_mail_heb.end_attachment( conn => conn );
    demo_mail_heb.end_mail( conn => conn );
    end;
    -- Return the next email address in the list of email addresses, separated
    -- by either a "," or a ";". The format of mailbox may be in one of these:
    -- someone@some-domain
    -- "Someone at some domain" <someone@some-domain>
    -- Someone at some domain <someone@some-domain>
    FUNCTION get_address(addr_list IN OUT VARCHAR2) RETURN VARCHAR2 IS
    addr VARCHAR2(256);
    i pls_integer;
    FUNCTION lookup_unquoted_char(str IN VARCHAR2,
    chrs IN VARCHAR2) RETURN pls_integer AS
    c VARCHAR2(5);
    i pls_integer;
    len pls_integer;
    inside_quote BOOLEAN;
    BEGIN
    inside_quote := false;
    i := 1;
    len := length(str);
    WHILE (i <= len) LOOP
    c := substr(str, i, 1);
    IF (inside_quote) THEN
    IF (c = '"') THEN
    inside_quote := false;
    ELSIF (c = '\') THEN
    i := i + 1; -- Skip the quote character
    END IF;
    GOTO next_char;
    END IF;
    IF (c = '"') THEN
    inside_quote := true;
    GOTO next_char;
    END IF;
    IF (instr(chrs, c) >= 1) THEN
    RETURN i;
    END IF;
    <<next_char>>
    i := i + 1;
    END LOOP;
    RETURN 0;
    END;
    BEGIN
    addr_list := ltrim(addr_list);
    i := lookup_unquoted_char(addr_list, ',;');
    IF (i >= 1) THEN
    addr := substr(addr_list, 1, i - 1);
    addr_list := substr(addr_list, i + 1);
    ELSE
    addr := addr_list;
    addr_list := '';
    END IF;
    i := lookup_unquoted_char(addr, '<');
    IF (i >= 1) THEN
    addr := substr(addr, i + 1);
    i := instr(addr, '>');
    IF (i >= 1) THEN
    addr := substr(addr, 1, i - 1);
    END IF;
    END IF;
    RETURN addr;
    END;
    -- Write a MIME header
    PROCEDURE write_mime_header(conn IN OUT NOCOPY utl_smtp.connection,
    name IN VARCHAR2,
    value IN VARCHAR2) IS
    BEGIN
    -- utl_smtp.write_data(conn, name || ': ' || value || utl_tcp.CRLF);
    utl_smtp.write_raw_data(conn, UTL_RAW.CAST_TO_RAW(name || ': ' ||value || utl_tcp.CRLF));
    END;
    -- Mark a message-part boundary. Set <last> to TRUE for the last boundary.
    PROCEDURE write_boundary(conn IN OUT NOCOPY utl_smtp.connection,
    last IN BOOLEAN DEFAULT FALSE) AS
    BEGIN
    IF (last) THEN
    utl_smtp.write_data(conn, LAST_BOUNDARY);
    ELSE
    utl_smtp.write_data(conn, FIRST_BOUNDARY);
    END IF;
    END;
    PROCEDURE mail(sender IN VARCHAR2,
    recipients IN VARCHAR2,
    subject IN VARCHAR2,
    message IN VARCHAR2) IS
    conn utl_smtp.connection;
    BEGIN
    conn := begin_mail(sender, recipients, subject);
    write_text(conn, message);
    end_mail(conn);
    END;
    FUNCTION begin_mail(sender IN VARCHAR2,
    recipients IN VARCHAR2,
    subject IN VARCHAR2,
    mime_type IN VARCHAR2 DEFAULT 'text/plain',
    priority IN PLS_INTEGER DEFAULT NULL)
    RETURN utl_smtp.connection IS
    conn utl_smtp.connection;
    BEGIN
    conn := begin_session;
    begin_mail_in_session(conn, sender, recipients, subject, mime_type,
    priority);
    RETURN conn;
    END;
    PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
    message IN VARCHAR2) IS
    BEGIN
    utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(CONVERT(message,'IW8ISO8859P8')));
    -- utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
    END;
    PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
    message IN VARCHAR2) IS
    BEGIN
    utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
    END;
    PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
    message IN RAW) IS
    BEGIN
    utl_smtp.write_raw_data(conn, message);
    END;
    PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
    data IN VARCHAR2,
    mime_type IN VARCHAR2 DEFAULT 'text/plain',
    inline IN BOOLEAN DEFAULT TRUE,
    filename IN VARCHAR2 DEFAULT NULL,
    last IN BOOLEAN DEFAULT FALSE) IS
    BEGIN
    begin_attachment(conn, mime_type, inline, filename);
    write_text(conn, data);
    end_attachment(conn, last);
    END;
    PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
    data IN RAW,
    mime_type IN VARCHAR2 DEFAULT 'application/octet',
    inline IN BOOLEAN DEFAULT TRUE,
    filename IN VARCHAR2 DEFAULT NULL,
    last IN BOOLEAN DEFAULT FALSE) IS
    i PLS_INTEGER;
    len PLS_INTEGER;
    BEGIN
    begin_attachment(conn, mime_type, inline, filename, 'base64');
    -- Split the Base64-encoded attachment into multiple lines
    i := 1;
    len := utl_raw.length(data);
    WHILE (i < len) LOOP
    IF (i + MAX_BASE64_LINE_WIDTH < len) THEN
    utl_smtp.write_raw_data(conn,
    utl_encode.base64_encode(utl_raw.substr(data, i,
    MAX_BASE64_LINE_WIDTH)));
    ELSE
    utl_smtp.write_raw_data(conn,
    utl_encode.base64_encode(utl_raw.substr(data, i)));
    END IF;
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    i := i + MAX_BASE64_LINE_WIDTH;
    END LOOP;
    end_attachment(conn, last);
    END;
    PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
    mime_type IN VARCHAR2 DEFAULT 'text/plain',
    inline IN BOOLEAN DEFAULT TRUE,
    filename IN VARCHAR2 DEFAULT NULL,
    transfer_enc IN VARCHAR2 DEFAULT NULL) IS
    BEGIN
    write_boundary(conn);
    write_mime_header(conn, 'Content-Type', mime_type);
    IF (filename IS NOT NULL) THEN
    IF (inline) THEN
    write_mime_header(conn, 'Content-Disposition',
    'inline; filename="'||filename||'"');
    ELSE
    write_mime_header(conn, 'Content-Disposition',
    'attachment; filename="'||filename||'"');
    END IF;
    END IF;
    IF (transfer_enc IS NOT NULL) THEN
    write_mime_header(conn, 'Content-Transfer-Encoding', transfer_enc);
    END IF;
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    END;
    PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
    last IN BOOLEAN DEFAULT FALSE) IS
    BEGIN
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    IF (last) THEN
    write_boundary(conn, last);
    END IF;
    END;
    PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) IS
    BEGIN
    end_mail_in_session(conn);
    end_session(conn);
    END;
    FUNCTION begin_session RETURN utl_smtp.connection IS
    conn utl_smtp.connection;
    BEGIN
    -- open SMTP connection
    conn := utl_smtp.open_connection(smtp_host, smtp_port);
    utl_smtp.helo(conn, smtp_domain);
    RETURN conn;
    END;
    -- Handling the Email Subject Line
    function mimeheader_encode(
    p_str varchar2
    , p_charset varchar2 := 'UTF-8') return varchar2 is
    l_str varchar2(2000);
    begin
    l_str:=utl_raw.cast_to_varchar2(utl_encode.quoted_printable_encode(utl_raw.cast_to_raw(p_str)));
    l_str:=replace(l_str,'='||chr(13)||chr(10),''); --unfold the data
    l_str:=replace(l_str,'?','=3f'); --quote question marks
    l_str:=replace(l_str,' ','=20'); --quote spaces
    l_str:='=?'||p_charset||'?Q?'||l_str||'?='; -- add prefix and suffix
    return l_str;
    end;
    PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
    sender IN VARCHAR2,
    recipients IN VARCHAR2,
    subject IN VARCHAR2,
    mime_type IN VARCHAR2 DEFAULT 'text/plain',
    -- mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
    priority IN PLS_INTEGER DEFAULT NULL) IS
    my_recipients VARCHAR2(32767) := recipients;
    my_sender VARCHAR2(32767) := sender;
    BEGIN
    -- Specify sender's address (our server allows bogus address
    -- as long as it is a full email address ([email protected]).
    utl_smtp.mail(conn, get_address(my_sender));
    -- Specify recipient(s) of the email.
    WHILE (my_recipients IS NOT NULL) LOOP
    utl_smtp.rcpt(conn, get_address(my_recipients));
    END LOOP;
    -- Start body of email
    utl_smtp.open_data(conn);
    -- Set "From" MIME header
    write_mime_header(conn, 'From', sender);
    -- Set "To" MIME header
    write_mime_header(conn, 'To', recipients);
    -- Set "Content-Type" MIME header
    write_mime_header(conn, 'Content-Type', mime_type);
    -- write_mime_header(conn, 'Content-Type', 'text/html; charset=UTF-8');
    -- Set "Subject" MIME header
    -- write_mime_header(conn, 'Subject', subject);
    -- write_mime_header(conn, 'Subject', CONVERT(subject,'IW8ISO8859P8'));
    write_mime_header(conn, 'Subject',mimeheader_encode(p_str => subject,p_charset => 'UTF-8'));
    -- write_mime_header(conn, 'Subject',CONVERT(subject,'IW8MSWIN1255'));
    -- Set "X-Mailer" MIME header
    write_mime_header(conn, 'X-Mailer', MAILER_ID);
    -- Set priority:
    -- High Normal Low
    -- 1 2 3 4 5
    IF (priority IS NOT NULL) THEN
    write_mime_header(conn, 'X-Priority', priority);
    END IF;
    -- Send an empty line to denotes end of MIME headers and
    -- beginning of message body.
    utl_smtp.write_data(conn, utl_tcp.CRLF);
    IF (mime_type LIKE 'multipart/mixed%') THEN
    write_text(conn, 'This is a multi-part message in MIME format.' ||
    utl_tcp.crlf);
    END IF;
    END;
    PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection) IS
    BEGIN
    utl_smtp.close_data(conn);
    END;
    PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection) IS
    BEGIN
    utl_smtp.quit(conn);
    END;
    END;

  • Problem by  Sending an Email with attached Adobe Interactive Form (Code)

    Thanks. I have written Programm, but it does not work as i want it to do. I will send an Email with attached Adobe Interactive Firm to [email protected]. I tried it with "*lo_recipient = cl_sapuser_bcs=>create( sy-uname )" at the marked(bold, fat) position. It worked but the Email was send to my SAP-Account, but i want to send to [email protected], so I tried this (see at code in bold, fat):
    lo_rec TYPE adr6-smtp_addr VALUE '[email protected]'. " Empfänger Receiver
    lo_recipient = cl_cam_address_bcs=>create_internet_address( lo_rec ).
    But it doens`t send the email.
    Can anybody help me please???
    Kevin
    Here my Code:
    Report FP_EXAMPLE_01
    Printing of documents using PDF based forms
    REPORT z_example_02.
    Data declaration
    DATA: carr_id TYPE sbook-carrid,
    customer TYPE scustom,
    bookings TYPE ty_bookings,
    connections TYPE ty_connections,
    fm_name TYPE rs38l_fnam,
    fp_docparams TYPE sfpdocparams,
    fp_outputparams TYPE sfpoutputparams,
    error_string TYPE string,
    l_booking TYPE sbook,
    t_sums TYPE TABLE OF sbook,
    l_sums LIKE LINE OF t_sums,
    fp_formoutput TYPE fpformoutput.
    PARAMETER: p_custid TYPE scustom-id DEFAULT 38.
    SELECT-OPTIONS: s_carrid FOR carr_id DEFAULT 'AA' TO 'ZZ'.
    PARAMETER: p_form TYPE tdsfname DEFAULT 'FP_EXAMPLE_01'.
    PARAMETER: language TYPE sfpdocparams-langu DEFAULT 'E'.
    PARAMETER: country TYPE sfpdocparams-country DEFAULT 'US'.
    Get data from the following tables: scustom(Flight customer)
    sbook (Single flight reservation)
    spfli (Flight plan)
    SELECT SINGLE * FROM scustom INTO customer WHERE id = p_custid.
    CHECK sy-subrc = 0.
    SELECT * FROM sbook INTO TABLE bookings
    WHERE customid = p_custid
    AND carrid IN s_carrid
    ORDER BY PRIMARY KEY.
    SELECT * FROM spfli INTO TABLE connections
    FOR ALL ENTRIES IN bookings
    WHERE carrid = bookings-carrid
    AND connid = bookings-connid
    ORDER BY PRIMARY KEY.
    Print data:
    First get name of the generated function module
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
    i_name = p_form
    IMPORTING
    e_funcname = fm_name.
    IF sy-subrc <> 0.
    MESSAGE e001(fp_example).
    ENDIF.
    Set output parameters and open spool job
    fp_outputparams-nodialog = 'X'. " suppress printer dialog popup
    fp_outputparams-getpdf = 'X'. " launch print preview
    CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
    ie_outputparams = fp_outputparams
    EXCEPTIONS
    cancel = 1
    usage_error = 2
    system_error = 3
    internal_error = 4
    OTHERS = 5.
    Set form language and country (->form locale)
    fp_docparams-langu = language.
    fp_docparams-country = country.
    *fp_docparams-fillable = 'X'.
    *fp_docparams-langu = 'E'. "wird jetzt automatisch gesetzt, bzw. kann dynamisch verändert werden
    *fp_docparams-country = 'GB'. "wird jetzt automatisch gesetzt, bzw. kann dynamisch verändert werden
    currency key dependant summing
    LOOP AT bookings INTO l_booking.
    l_sums-forcuram = l_booking-forcuram.
    l_sums-forcurkey = l_booking-forcurkey.
    COLLECT l_sums INTO t_sums.
    ENDLOOP.
    Now call the generated function module
    CALL FUNCTION fm_name
    EXPORTING
    /1bcdwb/docparams = fp_docparams
    customer = customer
    bookings = bookings
    connections = connections
    t_sums = t_sums
    IMPORTING
    /1bcdwb/formoutput = fp_formoutput
    EXCEPTIONS
    usage_error = 1
    system_error = 2
    internal_error = 3
    OTHERS = 4.
    IF sy-subrc <> 0.
    CALL FUNCTION 'FP_GET_LAST_ADS_ERRSTR'
    IMPORTING
    e_adserrstr = error_string.
    IF NOT error_string IS INITIAL.
    we received a detailed error description
    WRITE:/ error_string.
    EXIT.
    ELSE.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDIF.
    Close spool job
    CALL FUNCTION 'FP_JOB_CLOSE'
    EXCEPTIONS
    usage_error = 1
    system_error = 2
    internal_error = 3
    OTHERS = 4.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    *********************Send the form*******************
    *********************to the Customer*****************
    *********************via Email***********************
    *IF i_down = abap_true.
    DATA: filename TYPE string,
    path TYPE string,
    fullpath TYPE string,
    default_extension TYPE string VALUE 'PDF'.
    Data:
    lt_att_content_hex TYPE solix_tab.
    *DATA: data_tab TYPE TABLE OF x255.
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
    buffer = fp_formoutput-pdf
    TABLES
    binary_tab = lt_att_content_hex.
    CLASS cl_bcs DEFINITION LOAD.
    DATA:
    lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
    lo_send_request = cl_bcs=>create_persistent( ).
    DATA:
    lt_message_body TYPE bcsy_text VALUE IS INITIAL.
    DATA: lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
    APPEND 'Dear Vendor,' TO lt_message_body.
    APPEND ' ' TO lt_message_body.
    APPEND 'Please fill the attached form and send it back to us.'
    TO lt_message_body.
    APPEND ' ' TO lt_message_body.
    APPEND 'Thank You,' TO lt_message_body.
    lo_document = cl_document_bcs=>create_document(
    i_type = 'RAW'
    i_text = lt_message_body
    i_subject = 'Vendor Payment Form' ).
    DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
    TRY.
    lo_document->add_attachment(
    EXPORTING
    i_attachment_type = 'PDF'
    i_attachment_subject = 'Vendor Payment Form'
    i_att_content_hex = lt_att_content_hex ).
    CATCH cx_document_bcs INTO lx_document_bcs.
    ENDTRY.
    lo_send_request->set_document( lo_document ).
    DATA:
    lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
    lo_send TYPE adr6-smtp_addr VALUE '[email protected]'. "Absender SENDER
    lo_sender = cl_cam_address_bcs=>create_internet_address( lo_send ).
    Set sender
    lo_send_request->set_sender(
    EXPORTING
    i_sender = lo_sender ).
    Create recipient
    DATA:
    lo_recipient type ref to if_recipient_bcs value is initial.
    Data:
    lo_rec TYPE adr6-smtp_addr VALUE '[email protected]'. " Empfänger Receiver
    lo_recipient = cl_cam_address_bcs=>create_internet_address( lo_rec ).
    *lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
    Set recipient
    lo_send_request->add_recipient(
    EXPORTING
    i_recipient = lo_recipient
    i_express = 'X' ).
    *lo_send_request->add_recipient(
    *EXPORTING
    *i_recipient = lo_recipient
    *i_express = 'X' ).
    Send email
    DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
    lo_send_request->send(
    EXPORTING
    i_with_error_screen = 'X'
    RECEIVING
    result = lv_sent_to_all ).
    COMMIT WORK.
    MESSAGE 'The payment form has been emailed to the Vendor' TYPE 'I'.

    Hi Kevin,
    Please try this code to send your mail, i wrote it and works well in many system.
    Take care if in your profile you got an e-mail adress define .
    Take care also of trnasaction SCOT customizing, are you able to send mail to e-mail adress ?
    Let me know if it's works.
    Best regards.
    <i>**----
    CLASS-DEFINITIONS
    DATA: send_request       TYPE REF TO cl_bcs.
    DATA: document           TYPE REF TO cl_document_bcs.
    DATA: sender             TYPE REF TO cl_sapuser_bcs.
    DATA: recipient          TYPE REF TO if_recipient_bcs.
    INTERNAL TABLES
    DATA: l_mailtext TYPE soli_tab.
    DATA: iaddsmtp   TYPE TABLE OF bapiadsmtp.
    DATA: ireturn    TYPE TABLE OF bapiret2.
    VARIABLES
    DATA: mail_line  LIKE LINE OF l_mailtext.
    DATA: bapiadsmtp         TYPE bapiadsmtp.
    DATA: subject    TYPE so_obj_des.
    DATA : att_subject TYPE so_obj_des.
    DATA : w_except TYPE REF TO cx_root .
    CONSTANTS : c_defmail TYPE ad_smtpadr VALUE
                     '[email protected]' .
    FIELD-SYMBOLS : <smtp> TYPE bapiadsmtp.
    *Convert the pdf given by function module into Binary .
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
      EXPORTING
        buffer     = output-pdf "PDF file from function module
      TABLES
        binary_tab = hexa.
    *Set subject of the mail
    subject = 'Exemple de PDF interactif'.
    Set text of the mail
    mail_line = 'Merci de remplir le formulaire et nous le retourner'.
    APPEND mail_line TO l_mailtext .
    Set the name of the attached document
    att_subject = 'Template du PDF'.
    TRY.
    Create persistent send request
        send_request = cl_bcs=>create_persistent( ).
    Get sender object
        sender = cl_sapuser_bcs=>create( sy-uname ).
    Add sender
        CALL METHOD send_request->set_sender
          EXPORTING
            i_sender = sender.
    Read the E-Mail address for the user
        CALL FUNCTION 'BAPI_USER_GET_DETAIL'
          EXPORTING
            username = sy-uname
          TABLES
            return   = ireturn
            addsmtp  = iaddsmtp.
        LOOP AT iaddsmtp ASSIGNING <smtp> WHERE std_no = 'X'.
          CLEAR bapiadsmtp.
          MOVE <smtp> TO bapiadsmtp.
        ENDLOOP.
        CASE bapiadsmtp-e_mail.
          WHEN space.
    No adress main for user, so send it to the default mail adress
            recipient =
         cl_cam_address_bcs=>create_internet_address( c_defmail ).
          WHEN OTHERS.
            recipient =
         cl_cam_address_bcs=>create_internet_address( bapiadsmtp-e_mail ).
        ENDCASE.
    Add recipient with its respective attributes to send request
        CALL METHOD send_request->add_recipient
          EXPORTING
            i_recipient  = recipient
            i_express    = 'X'
            i_copy       = space
            i_blind_copy = space
            i_no_forward = space.
    Set that you don't need a Return Status E-mail
        CALL METHOD send_request->set_status_attributes
          EXPORTING
            i_requested_status = 'E'
            i_status_mail      = 'E'.
    set send immediately flag
        send_request->set_send_immediately( 'X' ).
    *Build Document
        document = cl_document_bcs=>create_document(
                            i_type    = 'RAW'
                            i_text    = l_mailtext
                            i_subject = subject ).
        add attachment to document
        CALL METHOD document->add_attachment
          EXPORTING
            i_attachment_type    = 'PDF'
            i_attachment_subject = att_subject
            i_att_content_hex    = hexa.
    Add document to send request
        CALL METHOD send_request->set_document( document ).
    Send document
        CALL METHOD send_request->send( ).
        COMMIT WORK.
      CATCH cx_send_req_bcs INTO w_except.
      CATCH cx_address_bcs INTO w_except.
      CATCH cx_document_bcs INTO w_except.
    ENDTRY.</i>

  • XI Mail Adapter: sending emails with attachment with help of java mapping

    Hi ,
    On trying out the scenerio mentioned in the blog, using the java mapping provided
    "XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
    The scenerio works just fine.
    But the payload as the content of the attachment is not getting generated in proper XML format.
    I suppose it's because of the replace special characters code part..
    Can anyone help me state the modification required in the code.
    Thanks!
    Regards,
    Faria Mithani

    It might be a codepage issue. Is your original payload UTF-8?

  • Sharepoint Online - Send email with attachment

    Hi All,
    is there some way how to send email with attachment, which is attached to list item in host web?
    I tried some of solutions but none of them not working.
    Server side:
    For example event receiver after added list item with attachment - Because it is office 365, in SandBox solution I can´t use SmtpClient class.
    Any other ideas?
    Client side:
    For example client web part with REST call. It works fine until I don´t need access to attachment.
    string oDataUrlAttach = "/_api/Web/lists/getbytitle('ListName')/Items(6)/AttachmentFiles('Document.docx')/$value";
                HttpWebRequest itemRequestAttach = (HttpWebRequest)HttpWebRequest.Create(sharepointUrl.ToString() + oDataUrlAttach);
                itemRequest.Method = "GET";
                itemRequest.Accept = "application/atom+xml";
                itemRequest.ContentType = "application/atom+xml;type=entry";
                itemRequest.Headers.Add("Authorization", "Bearer " + accessToken);
                HttpWebResponse itemResponseAttach = (HttpWebResponse)itemRequestAttach.GetResponse();
    Here I get error: The remote server returned an error: (403) Forbidden.
    But other calls are OK. I can get all items from my list except attachments.
    Any ideas?
    Thank you.

    Why hasn't this been answered?
    Sam Ogle

  • How to send an email with attachment to dynamic emial address using PL/SQL

    Hi,
    i want to send an automated email with attachment everyday to differnet people so number people is not static.
    so is it any way using PL/SQL ?
    thanks for your support!

    i want to send an automated email with attachment everyday to differnet people so number people is not static.
    Why? Explain it.
    You can create a table and store your email id through front-end application day to day.
    The table should look like this ->
    satyaki>
    satyaki>select * from v$version;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
    PL/SQL Release 10.2.0.3.0 - Production
    CORE    10.2.0.3.0      Production
    TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
    NLSRTL Version 10.2.0.3.0 - Production
    Elapsed: 00:00:00.04
    satyaki>
    satyaki>
    satyaki>create table email_master
      2    (
      3       email_grp_header         varchar2(30) not null,
      4       craete_time                  timestamp,
      5       constraints pk_header primary key(email_grp_header)
      6    );
    Table created.
    Elapsed: 00:00:02.12
    satyaki>
    satyaki>create table email_chld
      2    (
      3       email_grp_header          varchar2(30) not null,
      4       email_recepient             varchar2(100),
      5       craete_time                   timestamp,
      6       constraint fk_header foreign key(email_grp_header) references email_master(email_grp_header)
      7    );
    Table created.
    Elapsed: 00:00:00.09
    satyaki>
    satyaki>
    satyaki>insert into email_master values('GRP_INVENTORY',systimestamp);
    1 row created.
    Elapsed: 00:00:00.07
    satyaki>
    satyaki>
    satyaki>insert into email_master values('GRP_PURCHASE',systimestamp);
    1 row created.
    Elapsed: 00:00:00.03
    satyaki>
    satyaki>commit;
    Commit complete.
    Elapsed: 00:00:00.04
    satyaki>
    satyaki>select * from email_master;
    EMAIL_GRP_HEADER               CRAETE_TIME
    GRP_INVENTORY                  24-OCT-08 08.55.36.190000 PM
    GRP_PURCHASE                   24-OCT-08 08.55.54.481000 PM
    Elapsed: 00:00:00.18
    satyaki>
    satyaki>
    satyaki>insert into email_chld values('GRP_INVENTORY','[email protected]',systimestamp);
    1 row created.
    Elapsed: 00:00:00.07
    satyaki>
    satyaki>insert into email_chld values('GRP_INVENTORY','[email protected]',systimestamp);
    1 row created.
    Elapsed: 00:00:00.04
    satyaki>
    satyaki>insert into email_chld values('GRP_INVENTORY','[email protected]',systimestamp);
    1 row created.
    Elapsed: 00:00:00.03
    satyaki>
    satyaki>insert into email_chld values('GRP_PURCHASE','[email protected]',systimestamp);
    1 row created.
    Elapsed: 00:00:00.03
    satyaki>
    satyaki>insert into email_chld values('GRP_PURCHASE','[email protected]',systimestamp);
    1 row created.
    Elapsed: 00:00:00.11
    satyaki>commit;
    Commit complete.
    Elapsed: 00:00:00.05
    satyaki>
    satyaki>select * from email_chld;
    EMAIL_GRP_HEADER               EMAIL_RECEPIENT                                                                                      CRAETE_TIME
    GRP_INVENTORY                  [email protected]                                                                                      24-OCT-08 08.56.46.107000 PM
    GRP_INVENTORY                  [email protected]                                                                                         24-OCT-08 08.57.03.551000 PM
    GRP_INVENTORY                  [email protected]                                                                                    24-OCT-08 08.57.36.277000 PM
    GRP_PURCHASE                   [email protected]                                                                                      24-OCT-08 08.58.06.129000 PM
    GRP_PURCHASE                   [email protected]                                                                                    24-OCT-08 08.58.26.900000 PM
    Elapsed: 00:00:00.10
    satyaki>And, then based on the group header you can get the list of recipient and use it dynamically inside your PL/SQL Application.
    Regards.
    Satyaki De.

  • Need to send external email with attachment for workflow 20000075

    Hello Everyone,
    I am new to W/F, I Need to send external email with attachment for PO Release W/F 20000075. Currently Work item is being sent to SAP inbox of required user based on PO Release strategy configuration in SPRO. I tried to create Send mail step after PO release event but I am not sure how to arrive at Recipient type in send mail step(the mail should be sent to person in the release strategy). Everything looks fine all I need to do is to send external email with attachment instead of sending work item into SAP inbox.
    Your help will be highly appreciated.
    Thanks.

    You can use extended notifications to send an e-mail message with a link to the workitem. Search for extended notifications in SDN.
    Regards,
    Martin

  • Emails with attachment send from and receive with XI

    Hi,..
    I have two questions regarding sending resp. sending mails from / to XI.
    A) is it possible to attach several files as attachment to mails sent via the mail adapter?
    Note: I do not want to send the message payload itself as attachment, but send an email with contents from the message payload and attach to this mail one or several files located at the disk as attachment?
    If , yes how can I achieve this.
    B) What happens with attached files, when the mail is sent to the XI mail adapter?
    Thanks in advance,
    Peter

    Hi
    >>A) is it possible to attach several files as attachment to mails sent via the mail adapter
    Yes it is possible ,go thru these blogs...
    https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
    Hope it helps.
    Regards
    Arpit Seth

  • How to use Java with PL/SQL commands to send an email with attachment

    Apologizes in advance if this is the wrong place to ask the question.
    I need to use Java with PL/SQL commands to send an email with attachment. My java application runs from the command line and does some magic to gather info from an Oracle 11g db. If the DB has sendmail configured, I'd like to send the results of the data gathering as an attachment to the email addresses. I'm not sure how to do this. I've been reading up on on PL/SQL can send email with UTL_SMTP - with attachments. I'm just not sure how to translate that into being triggered by my Java application. Any suggestions or pointers on what I should read would be appreciated.
    Background - I've been programming in Java for 10+ years, but this is my first time using databases. I also have been on these forums for a long time, but lost my profile when it was switched to Oracle.
    Thanks for all help.

    user13726880 wrote:
    The original requirements were put together and given to me, an Oracle newbie. They expected the Java app to use something intrinsic to Oracle and Unix sendmail. To solve my problem, I use a JDBC connection to run some SQL commands. I take that data, format it and send the results by email to the user. By default the requirement is to send it as an HTML attachment using Unix 'sendmail'. So I do that using Runtime exec. I have also added JavaMail functionality as an alternative to sendmail. It works great and as expected.Sounds like a reasonable solution.
    Note however that PL/SQL itself can send email. And PL/SQL can call unix sendmail too.
    However myself I would have done it in java with JavaMail.

Maybe you are looking for

  • WIFI problem or not?

    I keep on comparing my Iphone5 to the Iphone 4s and Ipod touch of my roommate. His Iphone and Ipod have full bar of the wifi connection indicator but my Iphone5 has 1 or 2 bars or more often does not have wifi indicator. We were 15feet away from the

  • Incoming International calls receiving problem.

    Hi Team, I have ISDN PRI E1 connection and i am able to recieve all international calls except two DID number. But I am able to receive national calls without having any problem. Also noticed that We are able to recieve international calls from certa

  • JDeveloper 11g for linux.

    I saw packages for windows and mac, the Base Install is for linux?

  • Is the '11 update worth the hassle that I am reading?

    I am a longtime iMovie user and am very hesitant to get the '11 upgrade after reading all of the reviews. I need factual opinions from fellow iMovie veterans. Thanks.

  • How do i sync calendar?

    How do I sync i-cal?  goes from computer to i-phone, but not the other way around?