Sending Fax via OS X?

I am clueless when it comes to faxing via a computer, so forgive my "stupid" question.
I want to be able to send faxes via the computer. Any recommendations on how to do this? I don't have an actual fax machine, but rather just a mac connected to the internet.
Free is good, but I am willing to pay a little.
Any help greatly appreciated,
Phil

The simplest way is to add a fax modem to your machine, hook that to your phone line and you're done - you can 'print' any document to the fax and away it goes. Apple's USB Modem (part no. MA034Z/A) does the job just fine.
The next step up would be a multi-function printer, if you have one. These devices combine printer, scanner and fax machine in one device and most enable faxing from the computer (similar to the above option where you 'print' to the fax machine).
Failing that there are several internet fax services such as eFax, Fax.com and MyFax (not an exhaustive list, by far). Pricing on these vary and these services tend to offer free or low-cost incoming fax options, too.
The main difference with the internet fax services is the file formats they support. Some offer support of uploading documents (e.g. Word documents, Excel spreadsheets, etc.) that they then 'print' and fax, but the big problem here is in formatting - if you used fonts they don't have installed then the results might not be as you expect. Usually you're better off printing to PDF (via the standard Print dialog) and uploading the PDF file which has a higher chance of being transmitted as you expect.

Similar Messages

  • HP LaserJet Pro 200 Color M276nw - Cannot Send Faxes via WIFI

    Hi all,
    I have a problem sending faxes from my laptop through the HP LaserJet Pro 200 Color M276nw printer.
    I can send faxes from the printer device itself if i place a doucment into the feeder.
    The problem exists when connecting to the all-in-one device via the WIFI, printing is fine and connection is active though when trying to fax a dcoument from my desktop utilising the FAX driver it complains about the printer being offline and cannot communicate to the all-in-one device?
    any help would be appreciated.
    Thanks
    Jono

    Hey @BSA_IT, 
    Welcome to the HP Support Forum.  
    I understand you're having an issue sending faxes from your PC through the HP LaserJet Pro 200 color MFP M276nw.  I would like to assist you with this.  
    The following might help:
    Click on Start / Devices and Printers
    Double click on your printer's Fax icon
    Click See What's Printing
    Click Printer
    If 'Use Printer Offline' is checked as you'll see in the screenshot below, be sure to uncheck it.  
    Next, try sending the fax through your laptop as before.  If you run into the same issue, try the following steps to rule out Windows settings as interfering with fax sending capabilities:
    Click on your Start menu
    In the 'search programs and files' box right above Start, type msconfig and hit enter on your keyboard
    When the System Configuration Window opens select 'Selective Startup' and uncheck Load Startup Items
    Click the Services tab. Check the box at the bottom for Hide All Microsoft Services
    Select Disable All
    Select Apply and OK
    Restart your computer when prompted
    Once the computer reboots, trying sending the fax.  
    To enable the programs after you've tested  the machine, just open MSCONFIG the same way and under the general tab, just click 'normal startup' Hit apply and OK and reboot one final time
    Please let me know the result of your troubleshooting by responding to this post.  
    Best of luck!   
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Sending Fax via EMail

    Hello,
    Is it possible to send Fax Number via Email through Output Server to MS Exchange? I get the "Underlying mail system has reported problems in accessing post office" error when I try. We can send Fax Number via Outlook no problem. thanks, C.

    Michelle_Hanson wrote: Cheapest Business VoIP Phone Inexpensive Online Fax
    Hi all,
    I use to send faxes from my email. All you have to do is purchase an account from a internet fax provider (i bought from popfax). All you have to do is to configurate your mail agent (such as outlook) and insert the mail of the company, the security code , attach the file and write the numbers (up to 500 of numbers)
    We've used several email fax companies as well and it is a convenient way to email if you don't mind scanning everything first and for many files,if they contain personal info or confidential email, you need to password protect before you can email.  So in many way, a regular fax is more time efficient.

  • Unable to send fax via internal modem

    Until two days ago our internal modem was working fine we have been able to send faxes with no problem. I have ran disk first aid and repair, but the modem still is not able to send a fax. We have check the phone line and there is a dial tone up to the computer, but not dial tone in the computer. Is my modem dead or is there another way to fix the problem.
    Thanks

    If you want to use the modem to send and receive faxes, then you don't want to have the Network trying to control it, you should disable the modem port in the Network prefs and use only the Ethernet port. You can use the Network prefs to troubleshoot to ensure that the modem is in working condition, but you can't have the network dial-up taking control of the modem at the same time as you want to be waiting for a fax or sending a fax. This can cause the modem to get hung, and you will get the waiting behavior that you described.
    You should just be able to receive faxes by checking the "Receive faxes on this computer" button in the Print & Fax Prefs. If you had an external modem you could see some activity lights come on as soon as you check the box as it goes into standby to answer a call mode, with an internal the only way to know it's working is to send yourself a fax.
    To send a fax, I think you might need to configure a Fax printer, if you don't seem to have one already. Click the "Setup Fax Modem..." button at the bottom of that Print & Fax Prefs. IF you launch /Applications/Utilities/Printer Setup Utility can you select from the View Menu: Show Fax List and does anything show up in the list? You should have a Fax List and fax printer in that list similar to your Printer List and whatever printer you have installed.
    To check if the modem is even working you may have to use some modem terminal utility like ZTerm that will let you type simple commands and check the modem response. For example AT should result in an OK. With the internal you can't check the activity lights to see if you are receiving data or sending data, so I'm not sure how else you can verify the internal modem is actually functioning. It might be worthwhile checking that first, or if you know you can use it for dial-up, I still use my modem as a backup for when DSL goes out (rarely).

  • Sending faxes via efax on Photosmart 7515

    Everything -- printing, scanning, faxing -- used to work on my 7515. Now everything except the sending of faxes works. I used to fax effortlessly (never more than 2-4 faxes per month) with the free efax account I set up when I bought my 7515. (All software associated with the 7515 is up to date.)
    So I checked efax.com, and it says there that one cannot send faxes using the efax free account.
    Did the terms of service change recently? If so, when? I did not know, when I bought the printer, that my modest fax usage would expire.
    If not: did I miss a download notice, or does something new need to be installed?

    Hi @DanMWatson
    Welcome to the HP Support Forums.  I understand that you are unable to access the eFax on your Photosmart 7515 printer.
    I have included a link to a post by @PrintApper regarding eFax titled eFax users - please read.  It has the information regarding the eFax feature.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Send Fax via Modem (issue)

    Fax issue
    Objective: using OS9, fax a word doc (custom cover page) & a pdf (or multiple individual pdfs)
    Status: lots of hours with no success --trying to locate fax programs, trying to use FAXstf 6 (frustration, seems that it should be easy to fax)
    System/Hardware/Software etc.: Running OS9.2 (as boot) on a MDD, MS Word 2001, Acrobat 5.0 Apple Internal Modem (HCF USB V.90 Data/Fax)
    ======
    FAXstf 6.0.8 actions
    1. drag pdf & word doc to drop icon
    pdf shows up, I click preview, word doc shows up, I click preview, it previews,
    I click cancel, pdf previews but it is blank, I click cancel, window closes,
    error message: Acrobat suddenly quite, type 3 error, suggest restart (or system error)  
    --note disc is in good repair
    2. drag pdf to drop icon
    pdf shows up, I click preview, it previews.. but skewd, text is horizontal and made stretched and shrunk to fit (i.e. text skewd to fit landscape page setup, then placed at 90 degrees)
    3. drag word doc to drop icon
    word doc shows up, I click preview, it previews, I cancel since it won’t let me send from here
    4. drag word doc to drop icon & send
    word doc shows up, I type in # for quick send, click send, fax status box..  dials & sends (looks as though it went through) --have not verified if is was received (to do Monday)
    Main issue
    1. I need to fax word docs with correctly sized pdfs
    Thanks

    Sorry This calls for buying a iMac, MacBook Air, Pro , Or Mac Pro . Sorry the Macintosh is not cutting it for 2013.

  • Sending faxes via computer

    Hi,
    can anyone help..... i see you can send and receive faxes on the mac which is a cool feature but i'm having issues with setting this up. I believe the issue is because i don't have a dial up modem. I'm connected to the internet via broadband. Is this right??? or can you send and receive faxes using a broadband connection???
    thanks

    Hi Reelsick Productions!
    See if any of these Third-Party FAX programs are adequate Version Tracker Search.
    There are also some other FAX services like eFax.
    Good Luck!
    ali b

  • Sending Fax - VIa WinFax

    Dear all.
        I need some help.
        I’m using the Mysap ECC 5.0 and we need to send messages by FAX, like PO and Others messages, In the version 46c and 4.7 we can use the Winfax, but for this version Mysap ECC 5.0 as far a understand at this moment we can not use the Winfax System.
        Does any one could help me.
    Best Regards
    Thank in Advanced.

    Hi,
    With ECC 5.0 version Right Fax can be used. This is an external Fax software that need to be installed on the system.
    At the same Right Fax operating prices are very less when comparing with other Fax softwares.
    Please check this option. We have successfully implemented this for our client.
    Thanks,
    Sivapratap

  • Send Fax via SE T630... Need help

    I have setup my OS X 10.4.2 to sending a fax over bluetooth and the connection works at first time. The phone begins to calling the number but after few secconds the connections broke. Have anyone an idea, whats the problem?

    Sorry This calls for buying a iMac, MacBook Air, Pro , Or Mac Pro . Sorry the Macintosh is not cutting it for 2013.

  • HP Send Fax - Broken

    Problem occurs on LaserJet Pro 200 Color MFP M276nw.
    Print, Scan, ePrint, etc works fine. Fax works fine at the printer itself (manually feeding paper through).
    Fax does not work using the Windows application "HP Send Fax". The error dialog shows everytime, no matter how many times I uninstall/reinstall the entire software package from HP for the printer.
    Windows Fax and Scan and print to Fax does not work because this printer does not create its own Fax port.
    Downgrading to Internet Explorer 10 (as some discussion around sending fax via the PC suggests) is NOT AN OPTION due to corporate security policies.
    Help?

    Hi kcnet,
    I understand that you are unable to send a fax through the software. I can help you.
    Do you also have the Laserjet 200 M276 printer also?
    How Do I Find My Model Number or Product Number?
    Can you send a fax from the printer?
    I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
    Try and send another fax again through the software.
    Then you will have to go back and enable the startup programs and turn the Antivirus Software back on again.
    Follow the steps in this document to get to the device manager to check for the printer entries. See if you have any conflicts for the fax driver. Also check devices and printers, to see if there is a icon for the fax.
     How do I get into Windows Device Manager?
    If the issue persists, just to rule out a network or communication issue, connect the printer directly to the computer by a USB cable to see if you have the same results. This way we will know if it is software related or a communication issue.
    If the issue persists, uninstall the printer software and then download and run the HP Printer Install Wizard for Windows. HP Printer Install Wizard for Windows.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Error when clicking send fax in SAP B1 2007A

    Hi,
    I'm trying to configure my client's SAP B1 server to be able to send faxes via SBOMailer and MS Fax. I read the guides and documentation.
    1. Does faxing only work strictly in the scenarios stated in the documentation?
    2. Will it work if:-
    a) The server has MS Fax and a fax modem installed; and
    b) I am logged in to the server via remote desktop; and
    c) I only configured the fax portion of the SBOMailer since I am not using the email function?
    Basically, in this scenario, the Service Manager, SBO Mailer, MS Fax, fax modem and SAP Client (because I am using remote desktop) are on the same machine.
    I am asking this because I keep getting the following error when I click send:-
    "Email address has not been defined for the sender. Cannot send email, SMS, or fax. , 'manager' [Message 3581-4]"
    I have checked the company details, business partner details and the fax console's "sender information". They all have email addresses and fax numbers keyed in.
    After a few minutes, the fax console shows that the system tried to dial to itself and so got a "no dial tone" error. The file that it sent only contained the Cover page and nothing else. What's going on?
    Can anyone out there help me?
    Regards,
    Jin Siang

    Hi,
    Thanks for your advice. That solved one part of the problem. Now the system states "Operation Completed Successfully." BUT nothing appears in the fax console outbox and sent folders. The SBOMailer and MS Fax do not seem to be communicating with each other.
    Email settings are blank because it is not used.
    For fax settings, I put:-
    Microsoft Fax Server: Server IP
    Fax Server Type: Microsoft Fax
    All tickboxes have been checked.
    Schedule settings: On specific date
    Connection settings: Correct login settings
    Database settings: Correct DB selected
    Any ideas, guys?
    Thanks,
    Chris.
    Edited by: Jin Siang Lee on Feb 18, 2009 10:38 AM
    Edited by: Jin Siang Lee on Feb 18, 2009 10:44 AM

  • How to send faxes and e-mails in ECC6 .0 ?

    We are trying to upgrade from 4.6c (hp-ux) to ECC 6.0 (hp-ux) .
    We are sending faxes via Winfax pro.
    In ECC 6.0 , transaction SPAD doesn't allow Telefax as a type of device.
    We are also sending e-mails through "SAP Internet mail Gateway" and MS-Exchange 2003.
    It seems the two solutions have been discontinued.
    How to setup fax & e-mail ?
    Winfax Pro is not supported now, so there it exist a SAP supported list of fax software ?
    Thank you.

    Hi,
    1. You have to Configure the Email connections through SCOT tcode.
    2. After that you ccan send/recive a mails from exchange server and SAP R/3 systems.
    Look into the following link.
    http://help.spa.com--> search for E-mail configuration and aslo search for FAX configuration.
    Regards,
    Srini Nookala

  • Since upgrade to 10.4.5: Faxing via shared fax modem broken?

    Since upgrading my Macs to Mac OS X 10.4.5 sending faxes via a shard fax doesn’t work anymore. When attempting to send a fax the error message
    "Error while printing"
    pops up. However, when faxing directly from the Mac with the shared fax modem, everythings works flawlessly.
    This used to work prior to upgrading to Mac OS X 10.4.5.
    Anyone here with similar experiences?
    Werner.
    Mac mini   Mac OS X (10.4.4)  

    The kernel panic points to Airport. Either your Airport software is way out of date or your Airport card may not be properly seated or has failed. So the first thing to do is remove the Airport card. If the panics cease, then reinstall the Airport card and see what happens. If it panics again, then remove the Airport card.
    The next thing I would do is:
    Boot from your OS X Installer. Be sure to use the installer for the version of OS X you have installed. After the installer loads select Disk Utility from the Installer menu (or Utilities menu if using Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The next thing I would do is download the 10.4.4 Combo Updater and reinstall the update. Then reinstall the Airport card and see if it works properly.
    I would suggest that before installing the update that you first boot into safe mode.

  • Faxing via SMTP using Faxination 5 as the Fax Server

    Hi,
    I need to setup faxing from a ECC6 server using a Faxination 5 server.  Currently we have it setup OK using a 4.6C server but ECC6 doesn't work.....so I am looking for a work around.....this is were I hope you guys can help
    I was thinking of setting up Faxing via SMTP (using MS Exchange) and the Faxination 5 server, has anyone done this? Or know if it can be done using Faxination?
    Faxing is possible from Exchange using a Faxination Exchange connector and I have looked at the thread Extraneous "FAX=+" prefix when sending faxes via SMTP and it would appear that other people have set this up using different Fax software.  Does anyone know what format the fax server will be looking for?
    Many thanks
    Rob

    Hello,
    Basically the RFC interface of SAPConnect has not been changed, so your FAXServer should be able to handle RFC Faxing also in ECC6 Server.
    You can recheck the configuration. /* Or copy here the error message, so we can take a look at */
    The output formats can be set-up in the SAP System also for SMTP Faxing.
    I think the destionation format should only depend on your Fax server needs.
    Best regards,
    Dezso

  • How to send  FAX from the SDK ?

    Hi,
    I'm trying to figure out what objects are used to send FAX via the sdk
    I dont know how to be set either, Is a MODEM needed ont the system where the ADD-ON is running ?
    I tried with FAXCOMLib.dll which never worked for me.  PRobably due to the fact that I don't know if its possible to send on a Remote Windows Fax Server
    I would apreciate just some hints.
    Thank you

    Marc,
    The SDK does not expose any objects at this time that works with faxing from Business One.
    Apologies.
    Eddy

Maybe you are looking for