Sending FCP subclip to STP without sending the master clip!

I have a bunch of subclips I want to clean up in STP, but no matter what I've tried so far, I can't get it to just send the subclip, not the entire masterclip.
Any suggestions?

Allow me to advise and seek help in same breath. My clip (with selection linked) cannot be send as STP as 'audio file' as it is greyed out but instead only as 'multitrack project'. Any reason why?
However each audio channel can be send to STP as an audio file individually (when selection is unlinked) and not both (shift selected) together. When one,
usually top channel, is 'send to' as audio file and saved (as . stap file), edited, and saved again, when back in FCP there is only that audio clip available, the other has disappeared. But it play the corrections but sounds weird (I guess
as the other channel is missing).
I am doing something wrong here? and what??

Similar Messages

How do you convert .AVI files for using in iMovie without losing the original clip time and date

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

Naming clip without altering the original clip name

Hi
I'm looking for a way to naming a clip without altering the original clip name.
For example:
I've got a clip called D066_140825_001_AA1663, which I need to preserve. But I would like to add an additonal name in a different box.
Ideally it would look something like this:
Name                                        Description
D066_140825_001_AA1663     Erica is moving the sofa
D066_140825_001_AA1664     Erica is driving
D066_140825_001_AA1665     Erica and John meets
etc.
I see that in the Premiere project window there's a row called Description. Are there a way for me to add a clip description from Prelude, or name the clips in any other way?

Hi SMOlsen,
Please check the below link and check if it helps.
http://helpx.adobe.com/prelude/using/prelude-logging-video.html#id_52195
Regards,
Vinay

I have all my devices connected to iCloud. I would like a reduced contact list on my iPhone without removing any from my master list on my computer. How do I delete contact numbers from my phone without disrupting the master list on my computer?

I have all my devices connected to iCloud. I would like a reduced contact list on my iPhone without removing any from my master list on my computer. How do I delete contact numbers from my iphone without disrupting the master list on my computer?

Are you trying to reduce the visual clutter on the phone, save space on the phone, or limit the security exposure if your phone is stolen?
If you are only wanting to reduce the visual clutter and make scrolling through the list faster, you could set up a group on the computer containing only the contacts you want to see on my phone (called, for example, "Show on my Phone") and enable only that group inside Contacts on the phone. You might even have one or more existing groups that you could enable that way (maybe "Family" and "Personal").

How do i hide a connected clip so that i can see the master clip underneath?

I am attempting to finalise a wedding video. For some reason the XML output gets scrambled in the transition between Final Cut Pro X and Resolve, losing all the in/out points in those clips which were part of two continuous hour-long movies (the master clips). The audio was scrambled at the same time.
So I have reconstructed the clip sequence in Resolve, restoring the correct in/out points and I have removed the audio altogether. I cannot export this back to FCP because the in/out points get scrambled again, so I have exported the timeline as a quicktime movie.
Now, in FCP Pro X, I have the Quicktime movie sitting as a connected clip above the original FCP Pro X timeline. But it is not quite in synch and I guess the edit points are not always frame for frame correct. To match up the new and old timelines I would like to be able to turn the connected clip on and off - but I can't see how to do this and I am not sure it is even possible.
I can skim the master track but this is very cumbersome. Is there any way to turn off the connected clip as one would do in a normal editor with tracks? Or is there a better way to align various points in the two tracks?

Ha. great! Thanks for that. I did know that! But I couldn't find it by searching the manual and I have spent the last week immersed in Resolve so I have forgotten all the FCP shortcuts already...

Deleting A Version Without Deleting The Master

I'm still on 1.5.6 (sorry)...I open a version in my external editor and save back into Aperture.
I have created a few versions that I no longer want. When I select "file-delete version" I get a window asking me if I want to delete the master image and all versions. I only want to delete one version and keep my Master.

You are using the right option to get rid of the "version". The reason aperture is giving you this message is because the "version" that you are targeting has been edited in an external editor. These are a bit different that "versions" that are just created with new version from master or duplicate version. If you send an image to an external editor Aperture actually creates a new psd or tiff master from your original master plus any adjustments applied to the version that you are looking at. Aperture then sends this new psd/tiff master to the external editor. So, when you have a few "versions" of the same image that have been sent to an external editor you also have new masters associated with them. If you delete one of those Aperture is telling you that it is going to get rid of the PSD/Tiff with the modifications that you made in the external editor, it is not telling you that it is going to get rid of the original RAW master that you imported.
Was that clear?
RB

HOWTO: Avoid go to detail block without fullfill the master block?

Hi:
I have a master detail form with 2 blocks. When the user open the form the focus is on the first text item (required = yes) of the master block. If the user tries to get out of that item with keyboard (tab or enter), it gets the correct message saying that the item is required and must be filled. But the problem starts when the user click with the mouse on another item of the detail block. Here, I will have 8 or 9 messages saying that is impossible to create records without a master record. This is really annoying. This message has no ID (FRM-XXXXX), and I really must get a way to forbide users to go to the detail block without filling required items in the master.
Anyone?
Best Regards
Joao

Hello,
if there is a relation between the two blocks double click on that rel.and mark the check box property:prevent Masterless operation try this option and tell me what's ur feed back..?
Regards,
Abdetu..

Final Cut Sending the wrong clip to Shake

In a project i'm currently working on i've selected clips and used the "send to shake" function. When shake launches, the project has totally different clips but from the same FCP project.
Has any one seen this before? Any advise would be great.
Thanks

Tobold: The Media Reconnect dialog screen is normal behavior when rendering a Shake sequence back to Final Cut. See page 34 of the Final Cut Studio Workflow PDF document.
http://manuals.info.apple.com/en/FinalCut_Studio_Workflow.pdf
Sending Media Back to Final Cut Pro
When you’ve finished working in the Shake script that was generated from Final Cut Pro, you need to render the originally created FileOut node. The newly rendered media file takes the place of the placeholder QuickTime file, ready for use by the original Final Cut Pro project.
When you reopen the Final Cut Pro project file containing the original placeholder QuickTime file, you’ll need to use the Reconnect Media command to relink the clip in your sequence to the media that was rendered out of Shake.

How does a family share an iTunes account without sharing the master password?

Is there any way to avoid having to give my password to my daughter? I have had the same AppleID for many years, and it also my email address, so I would prefer not to share the password with all of my family. As far as I can tell, I can not change my AppleID associated with my iTunes account.
I do want my daughter to be able to download apps or updates to existing apps even when she is not with me, but that doesn't seem possible without sharing passwords.
It would be great if iTunes allowed "sub-accounts." Perhaps someday.

I do want my daughter to be able to download apps or updates to existing apps even when she is not with me, but that doesn't seem possible without sharing passwords.
That is indeed not possible. She'll either need to re-acquire all those apps through her own iTunes Store account, you'll have to give her the password to your account, or you'll have to do all the updating for her.
Regards.

Video Editing - can i make something in the clip blurred without having the whole clip blurred?

In my movie clip I need to blur or cover up some confidential info, Is there a way to do this?

Hi Appleman
Thanks for your help. I think you hit the nail on the head when you mentioned the thumbnails folders - I looked inside those and found a miniature of the whole movie - obviously it refers to that when showing you the previews etc. Thats why nothing seemed to have changed. Im sure that when I finalised or exportted it would have referred to the full version.
While I was waiting for an answer I just went ahead and reimported the whole thing and found that I could replace the existing video with the new one and all the titles etc styed in place.
I will be interested to see some other time if it is possible to simply switch and and delete the thumbnails.
Many thanks for your time. Given that I dont know for sure if your answer works, I better only mark it as helpful.
Cheers
Mark

Why can I not paste a photo in iMovie08 without disrupting the audio

All i can find in the threads is use iM06 or iM HD. Are you serious? They left this out of the 'latest' release. I dont have iM06. I have a brand new mac. Do I now have to buy iM HD? Please somone help.

Sorry let me clarify. I am trying to drag a photo over exsisting video footage with its original audio. It ends up splitting the video track and it's audio. We used to be able to drag a photo over a video clip without disrupting the video clip's audio essentially 'overlaying' the photo for a nice effect.
it should be working as your described unless the "photo" is a "single" frame copied to the "iMovie" modified clipboard and "pasted" into the video clip. In this case simply save the "frame" as a graphic file (e.g., JPEG) and then drag it in normally from the desktop as you would a photo from iPhoto to automatically turn it into a "still frame" sequence which overlaps your video normally.

Schedulinng the Master Data- MDMGX

Hi All,
Can you help me on regarding this :
We have scenario where ECC(HCM) sending the master and reference data of PersonnelAdministration(PA)/Organization Management(OM) to MDM and our design confirmed that usign PFAL transaction for send the master data from HCM where MDM mster tables interested and usign MDMGX transaction for send reference data where MDM flat tables interested. Both are initial loads and as follows delta loads.
This process will through using SAP PI as middleware and we identified IDOC is HRMD_A07 for fetch the data from ECC , so my questions are :
1. what is the related report can call to trigger this HRMD_A07 using PFAL and how do i schedule this IDOC for initial loads as well as delta loads(when changes occures).
2. We required some custom zfields for adding this IDOC , how do I handle this (need steps)?
3. Did MDMGX/PFAL can capable to handle initial loads as well as delta loads?
4. can you guide me whole process for development perceptive.
5. I am new for this kind of work , if you have standard links and documents would help me lot..
hoping that I may reach you with related questions.. pls. help me development point of view..
Thanks for your time ..will appreciate with regards..
- Shankar

Hi Shankar
Sorry, your question not for MDM
More about XP/PI from:
Process Integration (PI) & SOA Middleware
MDM can syndicate only new(or updated) records from MDM repository to special directory(which confirgured as MDM outbond port) and XI/PI can get that syndicated file and send it to destination system.
Regards
Kanstantsin
Edited by: Kanstantsin Chernichenka on Oct 31, 2009 9:05 AM

I split my clip in three ways, then deleted the middle clip

I have a question. I split my clip in three ways, then deleted the middle clip, what I do to join these three clips again ? I need some help. Is It only work with the Precision Editor? because i think it s so difficult!

Not sure I understand.
What do you mean by
when I cut back on the corner of a clip that connects to another,
If you do what I suggested above you should be able to bring back the original clip to the project from the event without affecting the other clips in the project ( ie without damaging the rest of the other cuts?)
You can drag the original clip (or any clip) to any position in the ' Time-line"
I assume from your post that you are using iMovie 11???

How do I have different speeds during my clip in imovie without having my whole clip one speed?

How do I have different speeds throught one clip without having the whole clip one speed?

The clip should be in your project. If it is not, drag it into your project from your event.
Now select the portion of the clip that you would like to change the speed for. A yellow border should be around this portion of the clip. Now, right-click on that portion of the clip and select SPLIT CLIP. Repeat if necessary if you need still more segments at different speeds. Now you can adjust the speed of these new split clips separately.

How can I get FCP to just send the video (without audio) from the viewer?

Is there a way to select only the video portion of a clip when sending it from the viewer to the timeline? Currently I am taking the whole clip, de-linking the video from audio and then deleting the audio - not exactly the fastest workflow.

Neil - Thanks for the suggestion but I am a bit more confused now but perhaps I wasn't as clear as I could be either. I am trying to drag clips into the timeline and superimpose them over other clips and I want to be able to drag only the audio or the video from the viewer to the timeline. Is this possible?

Sending FCP subclip to STP without sending the master clip!

Similar Messages

Maybe you are looking for