Sending from and receiving mail to an alias

I have tried to set up an email alias address for someone with a local POP account (not MobileMe). It was possible to send the mail from that alias address but it was impossible to receive mail to that alias address.
Is that normal ? If not, what do I need to do ?

Excellent!
If a true alias, then AT will deliver the message directed to the alias to the existing POP3 server, and it will download along with other messages to the real address. Mail communicates with the server on the basis of the Username, and can pick messages to all addresses handled by that POP3/Username combo.
Ernie

Similar Messages

Why does "Sender Name" randomly change from the actual sender to another sender from recently received mail?

When the email is first received the "Sender Name" is correct. When opening Thunderbird later the "Sender Name" has been changed in a random fashion to another sender of recently received email.

Maybe the indexing needs fixing.
right click on foldre and select 'Properties'
Then click on 'Repair folder' button
click on OK
refresh folder pane / clickon another folder and then go back.

Emails with attachment send from and receive with XI

Hi,..
I have two questions regarding sending resp. sending mails from / to XI.
A) is it possible to attach several files as attachment to mails sent via the mail adapter?
Note: I do not want to send the message payload itself as attachment, but send an email with contents from the message payload and attach to this mail one or several files located at the disk as attachment?
If , yes how can I achieve this.
B) What happens with attached files, when the mail is sent to the XI mail adapter?
Thanks in advance,
Peter

Hi
>>A) is it possible to attach several files as attachment to mails sent via the mail adapter
Yes it is possible ,go thru these blogs...
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
Hope it helps.
Regards
Arpit Seth

HT201320 Unable to step my outlook account keep getting warning unable to verify account I can send and receive mail on my iMac using the outlook account HELP

Unable to setup my ipad for my outlook account I keep getting the message unable to verify, although I can send and receive mail from my iMac using the same outlook account.

Confirm you did this: https://support.google.com/mail/answer/1173270?hl=en
You might also try removing all gmail passwords from your keychain in Keychain Access. Then connect again and enter the password code given by Google.

Please..how to instal libero mail on mi Ipad. I need the parameter for send and receive mail..Thanks

Please..how to instal "libero" mail on my Ipad. I need the parameter for send and receive mail..Thanks

FYI: POP will by default, delete messages from the server after downloading them (This applies to most pop clients, computer or mobile). POP is old tech and is not recommended if IMAP or Exchange are available. The default when setting up a g-mail type account is IMAP. Full synchronization with the server. You may also be able to set it up as an Exchange account, allowing for push e-mail and sync of calendars and contacts as well. See the Gmail help pages for instructions.

I have 4 email accounts in apple Mail. My mail is sending from the wrong account. even on "reply" it sends from a different account. I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from a

I have 4 email accounts in apple Mail. My mail is sending from the wrong account. even on "reply" it sends from a different account. I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from the same gmail account. Help.

I HAD two accounts because of this problem. I completely removed the problem account from the Apple Mail client. Guess what is happening?? That's right - Mail is still sending from the other account that no longer exists on my computer, and I have absolutely no idea how this is happening. This is incredibly frustrating. When a recipient chooses to reply to my message, quite often I won't get it now because it is going to the other account that has now been deleted from my system. COME ON APPLE!!! WHAT'S THE DEAL WITH THIS???

When I upgrade to yosemite, when I have to send and receive mail is very slow

When I upgrade to yosemite, when I have to send and receive mail is very slow. Mails take a long time to be send and receive, and the mail boxes disconnect frequently. I am using the yosemite mail server and don't have this issue with user with Maverick.
Many Thanks

So let me see if I understood it right... In Mavericks you didn't had this issue, this only happens in Yosemite and you are using Apple Mail, not another mail client. Have you tried in System Preferences > Internet Accounts unchecking and rechecking the email checkbox on your account?? If that doesn't works try deleting and adding your account.
Sorry for the bad English

I have been unable to view the content of any messages since installing OS X Mavericks. I can send and receive mail, but viewing message content crashes the mail app.

Need assistance accessing mail message content. Message display in inbox, but content cannot be viewed. I have attempted reindexing without success. Send, compose and receive all work fine. When opening content of message, the mail app crashes.

Mail: Troubleshooting sending & receiving email messages

Invalid Certificate Microsoft Outlook cannot sign or encrypt this message because you have no certificates which can be used to send from your e-mail address.

Hi,
I have a problem when trying to sign emails with an X.509 certificate in Outlook 2010. I constantly get the error message. The certificate is Verified for the email address I'm sending from.
"Invalid Certificate
Microsoft Outlook cannot sign or encrypt this message because you have no certificates which can be
used to send from your e-mail address."I have no problem with signing documents in Word 2010 with the same certificate, only when trying to send email.Every check I can perform confirms that there's nothing wrong with the certificate. Yet, Outlook still says it is invalid.I have even tried installing a second X.509 for the same email address just to check. Outlook doesn't seem to like either certificate.I know this has been posted before, but I'm completely stuck here.Thanks,~Dan

Hi,
You may have checked the option "Encrypt contents and attachments for outgoing messages" in Outlook, please uncheck this to test if the problem persists.
File -> Options -> Trust Center -> Trust Center Settings -> E-mail Security -> Clear the checkbox "Encrypt contents and attachments for outgoing messages" -> OK.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Mail Missing Plug-in after sending; quit and restart Mail fixes it

mail > Missing Plug-in after sending; quit and restart Mail fixes it.
Its very obnoxious after all these years to have Apple Mail continue to complain about Missing Plug-in
This happens for PDFs, .zips, .jpgs and other types.
Any ideas why Apple cannot seem to fix this?

Back up all data.
Boot into Recovery mode. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

Regarding Sender query and receiver query

Hi Masters
I have one sender query and receiver query. Both queries contain G/L account.
First I got sender query report, in this report I drill down one free charactteristics field to get correponding field sales document in receiver report.
Is it mandatory which field i drill down in sender report should be in receiver report?
Could you please help ?
Thanks in Advance
Raja.S

I would rewrite the first one to:
Select t.id_entity,t.id_trade_ref,p.am_stock
from trade t,posting p
where t.id_trade_ref = '5V973781B'
and p.id_trade_ref = t.id_trade_ref
This way, you really make the join between the table.
I think the join is better because it uses less code. I do not think you will notice much performance win between one or the other, especially because it concerns only a few rows.

Send Task and Receive Task

In our beta test, we came upon several issues, one of them is when we create a BPMN process that consists of the following simple flow: Start -> User Task 1 -> Send Task -> User Task 2 -> Receive Task -> User Task 3 -> End
When we deploy and run the flow, it always stops at the Receive Task. But when we remove User Task 2 from the flow and redeploy and run, the process runs fine all the way to the end. I am wondering if this is a bug in BPM 11g where if you put an activity between Send Task and Receive Task, it does not work, but when you do not have a task between Send Task and Receive Task, it works fine. Can someone confirm this scenario please?
Within the Send Task and Receive Task, we are invoking a BPEL process that has a simple asynchronous service. The Send Task invokes the BPEL process, and the Receive Task has the callback to the BPEL process.
Makes sense?
Thanks.

What does the bpel process do? Does it work with a synchronous bpel process?
I think you should submit an SR for this since it works when there is no activity between the send/receive.
Heidi.

I can no longer send from my apple mail since icloud.

I have made a mess of things. I can no longer send from my apple mail since icloud. My outgoing mail remains offline no matter how I reconfigure it.
How do you check your tls certificate? Is is me.com or mac.com?
I am so frustrated.

Hi philo f,
If you are having an issue with printing from your iPad mini, I would suggest that you troubleshoot using the steps in this article -
About AirPrint
Thanks for using Apple Support Communities.
Best,
Brett L

PI 7.1 Sender Interface and Receiver Interface gets interchanged

Hi All,
I m facing a strange problem in PI 7.1
For many of my scenarios, the Sender Interface, sender namespace and receiver Interface, receiver namespace information gets interchanged and displayed incorrectly.
But sometimes its working fine.
When we analysed the Log messages, found that, after xml validation step, the sender and reciever interface gets interchanged.
Any idea why this happens?
How to rectify this error?

Aarthi,
Please check your message interfaces once again. Sender is outbound and Receiver is inbound.
Also please check your receiver determination.
Regards,
---Satish

Sender DEBIT and receiver DEBIT

Dear all,
I notice in settlement, there are 2 button : sender and receiver. Now, what confused me is why both also called sender debit and receiver debit?
Why both also DEBIT?
Please advise me.
Thanks

Dear All,
I see mostly it is like that where sender debit and receiver debit. If you go into KO88 previous settlement, you will get this.
I read in forum also it is explaining in debit.
You assign the debit cost element groups to a settlement cost element.
You settle by cost element - that is, the debit cost element is the settlement cost element.
so i would like to know why the title is sender debit and receiver debit. why both debit.
thanks

Sending from and receiving mail to an alias

Similar Messages

Maybe you are looking for