Sending from mobile device message gets hung in gwia
I have a strange problem in that sometimes my outgoing messages get sent ok from a mobile device other times it just seems to hang in gwia and on the mobile device. (i.e. the connection seems to hang).
IF I turn on airplane mode on the phone then turn the airplane mode off, the message gets sent ok. (When I do this my mobile device gets a new ip address and the message gets sent ok.)
I turned off /RBL checking as I noticed my cellular carrier has some blacklisted ip addresses, which I ocassionallly get.
Any idea's on what I can do? I also checked the blocked.txt file and there is no ip addresses in there.
Thanks
comnet,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com
Similar Messages
-
Launch Adobe offline form from Mobile device
Hi,
Our use case : We are trying to launch adobe form from Mobile device.
Idea : The form template is locally stored on the mobile device. The mobile application tries to launch this adobe form and populate some of the fields and then send this data to SAP.
What is the best way to achieve this ? Is it possible to launch the adobe form and then populate the fields?
What is the best way to transmit the data, as GPRS is the mode of communication.
any thoughts would really help.
Thanks,
SaujanyaHi Saujanya,
Are you using SAP NetWeaver Mobile 7.1?
Thanks & Regards,
Abhijit -
How to cpture video from mobile device using MMAPI?
Dear freinds
Q1:-
I am working on a project that require capture image from mobile device (Cell Phone) but in J2ME Wireless Toolkit their is no any code example to do this .
Q2:-
Is this possible that i cn plug web cam to capture image from emulator
if yes than please replay me with code exampleWell i am pretty certain i need to develop a java code which would allow the same. But i was looking forward if anyone knows about any API which have certain interfaces exposed which would support this type of communication. Like you can get code sniplets for SMSC which allows SMS to be sent from application to any mobile phone i was thinking might be some help would also be available for the reverse.
Or if there are any tutorials available on net which might be of some help then please share.
Thanks -
How do I get the music back on my iPhone after manually deleting it from the device (to get space for photos/videos)? I can sync with iTunes but it doesn't copy these songs back, even though they still appear in my iTunes library. I can click on the Music link under 'On My Device' in iTunes and the missing songs all appear to still be on the device, but they are not. I normally delete using iTunes and do not have this issue. This time I was out and needed more space to shoot photos and videos so I removed a lot of music from my phone through the Music App.
The songs I'm trying to reload on my phone are on my PC. These we had loaded into iTunes. I can remove them all from the library and then add them all back one by one I imagine. The problem I'm having is that I removed them manually from the phone, they still appear in iTunes music library yet they won't sync. I don't want to take the time to compare the phone to my library, remove from the library what's missing on the phone and then add them all back again. 64GB (mostly music) will take a while.
-
I use iPhone 4S 8GB device. Want to move the back up from mobile device to computer. Can anyone help me on this?
It's not clear what you're asking. What mobile device are you talking about. iPhone back ups are ordinarily in one of two places: iCloud or a computer. The are not stored on the phone. If you're currently backing up your phone to iCloud and you want to back it up to your computer, you can do that using iTunes. You don't move a back up from iCloud to your computer.
-
SAP AII 5.1 Transactions from Mobile device - Using SAPConsole
Hi Friends ,
1 . From Mobile devices [ SAPConsole enabled ] , can we execute all SAP AII 5.1 transactions ( Like Tag commissioning, decommissiong , Packing ,Loading etc ., ) ?
2. We specifilcally looking for 2DBarcode and Liner barcode not for RFID .So, will it fulfill our needs ?
Please provide some inputs and it would be great if you provide some help links .
Regards.,
V.RangarajanHi Henrik,
Did you find the solution to your problem ?
I'm facing the same issue, so I'd be pleased to know the solution!
Regards
Stekam -
SAP system access from mobile device
Hi Techies,
One of my client requirement is as below:
For WMS operations they need to access SAP from mobile devices, SAP suggested to use SAP Console for their requirement.
What are the available options to achieve this?
And any sample docs/Install guide links?
Env is SAP 4.7
Regards,
NIck LoyHi Nick,
1) We are running on ABAP engine(SAP 4.7), is it possible to use SAP ITS ?
Yes, it is possible: you can use the ITS 6.20; SAP note 325616 will provide you with more information.
2) If possible what are the mail installation kits, R/3 activities to activate the ITS service?
You can go through the installation guide:
htp://service.sap.com/instguides -> SAP Frontend Components (ITS / GUI) -> SAP Internet Transaction Server -> 6.20
Here you find the Installation Guides, for example SAP @WEB 6.20 (SAP ITS) Inst. Guide Patchlevel 23 or higher
I hope this helps,
Cristiano -
Cannot send email from mobile devices in 2013
We recently implemented our new Exchange 2013 server,everything ok except for mobile devices. In mobiles i can receive emails, but cant send or reply to any emails. I tried in both android and iphone, not working. Can anyone help to solve this problem.
Hi,
Check if you have the Accepted domain settings are correct.
ECP->Mail Flow->Accepted Domains. Make sure that your default domain is the domain which is having the AD name (eg.domain.local)
Regards from ExchangeOnline.in|Windows Administrator Area | Skype:[email protected] -
Message encode from mobile device
Message received encoded koi8-r was forwarded from a mobile device connected to Exchange 2010 with the header was encoded in windows-1251 and the message body in koi8-r and accordingly the recipient(user) could not read it. How can I fix these errors?
I am still waiting for anybody that can help me with this problem. I have uninstalled and reinstalled many time without success.
-
XML sending to Mobile Device with KXML + Bluetooth
Dir Madame,
Dir Sir ;-)
I am using a N73, WTK22, EcipseME and KXML 2.3.0. I initalized a Bluetooth Connection between my mobile and my desktop application. So far, so well.
It is possible to send simple String-Messages to my mobile device via DataOutputStream (dos) / DataInputStream (dis).
dos.writeUTF("Hello Nokia Forum"); //ServerSide (=Desktop)
print(dis.readUTF()); //prints "Hello Nokia Forum" on my Display. - ClientSide (=Mobile)
But.. for sure, i need to send XML messages. Therefore, i send a XML File byte for byte from my desktop application to the mobile like this:
boolean read = true;
while (read) {
byte b = dis.readByte();
System.out.println(b);
dos.write(b);
catch(java.io.EOFException es){end of file reached..}
If i print the bytes which are written to the outputStream (from desktop), for example, i get
60
63
120
109
if i read them, on the client side, i get the same!
60
63
120
109
- So, everything looks fine. But if i stop reading them out on the Client Side, and give the InputStream the XML Parser, i get an org.xmlpull.v1.XmlPullParserException
Reader reader = new InputStreamReader(serverInputStream);
KXmlParser parser = new KXmlParser();
parser.setInput(reader);
parser.nextTag(); //PullParserException..
If i test my Code with
InputStream in = new FileInputStream(url);
where "url" is my XML file, KXML parses this direct InputStream. But if i read this InputStream and send it byte for byte to my mobile - KXML cannot read this..
any ideas?Hi,
As u told kXML can be used for devices like 6630 nokia. so i downloaded the jsr files of xml.plz tell me how to use kxml to make a xml file from a text file consisting of text and data residing on the device and send to the server to process it..for the time being tell me how to use kxml...any good documentation abt its usage in Netbeans IDE 6.1...
regards,
sanjay -
Invalid MIC from Mobile Device
Hello guys,
i have two media tablets same hardware same driver. One is working proper and the other one is not able to associate with my ssid.
the debug out shows the follow:
*dot1xMsgTask: Feb 06 14:51:25.007: a8:54:b2:00:8b:34 Starting key exchange to mobile a8:54:b2:00:8b:34, data packets will be dropped*dot1xMsgTask: Feb 06 14:51:25.007: a8:54:b2:00:8b:34 Sending EAPOL-Key Message to mobile a8:54:b2:00:8b:34 state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00*Dot1x_NW_MsgTask_4: Feb 06 14:51:25.027: a8:54:b2:00:8b:34 Received EAPOL-Key from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:25.027: a8:54:b2:00:8b:34 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:25.027: a8:54:b2:00:8b:34 Received EAPOL-key in PTK_START state (message 2) from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:25.027: a8:54:b2:00:8b:34 Received EAPOL-key M2 with invalid MIC from mobile a8:54:b2:00:8b:34 version 2*osapiBsnTimer: Feb 06 14:51:26.173: a8:54:b2:00:8b:34 802.1x 'timeoutEvt' Timer expired for station a8:54:b2:00:8b:34 and for message = M2*dot1xMsgTask: Feb 06 14:51:26.173: a8:54:b2:00:8b:34 Retransmit 1 of EAPOL-Key M1 (length 121) for mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:26.257: a8:54:b2:00:8b:34 Received EAPOL-Key from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:26.257: a8:54:b2:00:8b:34 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:26.257: a8:54:b2:00:8b:34 Received EAPOL-key in PTK_START state (message 2) from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:26.257: a8:54:b2:00:8b:34 Received EAPOL-key M2 with invalid MIC from mobile a8:54:b2:00:8b:34 version 2*osapiBsnTimer: Feb 06 14:51:27.173: a8:54:b2:00:8b:34 802.1x 'timeoutEvt' Timer expired for station a8:54:b2:00:8b:34 and for message = M2*dot1xMsgTask: Feb 06 14:51:27.173: a8:54:b2:00:8b:34 Retransmit 2 of EAPOL-Key M1 (length 121) for mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:27.197: a8:54:b2:00:8b:34 Received EAPOL-Key from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:27.197: a8:54:b2:00:8b:34 Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:27.197: a8:54:b2:00:8b:34 Received EAPOL-key in PTK_START state (message 2) from mobile a8:54:b2:00:8b:34*Dot1x_NW_MsgTask_4: Feb 06 14:51:27.197: a8:54:b2:00:8b:34 Received EAPOL-key M2 with invalid MIC from mobile a8:54:b2:00:8b:34 version 2*osapiBsnTimer: Feb 06 14:51:28.173: a8:54:b2:00:8b:34 802.1x 'timeoutEvt' Timer expired for station a8:54:b2:00:8b:34 and for message = M2*dot1xMsgTask: Feb 06 14:51:28.173: a8:54:b2:00:8b:34 Retransmit failure for EAPOL-Key M1 to mobile a8:54:b2:00:8b:34, retransmit count 3, mscb deauth count 2*dot1xMsgTask: Feb 06 14:51:28.173: a8:54:b2:00:8b:34 Resetting MSCB PMK Cache Entry 0 for station a8:54:b2:00:8b:34*dot1xMsgTask: Feb 06 14:51:28.173: a8:54:b2:00:8b:34 Removing BSSID 34:db:fd:67:89:2a from PMKID cache of station a8:54:b2:00:8b:34*dot1xMsgTask: Feb 06 14:51:28.173: a8:54:b2:00:8b:34 Setting active key cache index 0 ---> 8*dot1xMsgTask: Feb 06 14:51:28.173: a8:54:b2:00:8b:34 Sent Deauthenticate to mobile on BSSID 34:db:fd:67:89:20 slot 1(caller 1x_ptsm.c:546)
config of the SSID:
(Cisco Controller) >show wlan 6WLAN Identifier.................................. 6Profile Name..................................... MedientechnikNetwork Name (SSID).............................. MedientechnikStatus........................................... EnabledMAC Filtering.................................... DisabledBroadcast SSID................................... DisabledAAA Policy Override.............................. DisabledNetwork Admission Control Client Profiling Status ....................... Disabled DHCP ......................................... Disabled HTTP ......................................... Disabled Radius-NAC State............................... Disabled SNMP-NAC State................................. Disabled Quarantine VLAN................................ 0Maximum number of Associated Clients............. 0Maximum number of Clients per AP Radio........... 200Number of Active Clients......................... 1Exclusionlist.................................... DisabledSession Timeout.................................. 86400 secondsUser Idle Timeout................................ 300 seconds--More-- or (q)uitUser Idle Threshold.............................. 0 BytesNAS-identifier................................... KPSS_WLC1CHD per WLAN..................................... EnabledWebauth DHCP exclusion........................... DisabledInterface........................................ medientechnikMulticast Interface.............................. Not ConfiguredWLAN IPv4 ACL.................................... unconfiguredWLAN IPv6 ACL.................................... unconfiguredmDNS Status...................................... DisabledmDNS Profile Name................................ default-mdns-profileDHCP Server...................................... DefaultDHCP Address Assignment Required................. DisabledStatic IP client tunneling....................... DisabledPMIPv6 Mobility Type............................. noneQuality of Service............................... SilverPer-SSID Rate Limits............................. Upstream DownstreamAverage Data Rate................................ 0 0Average Realtime Data Rate....................... 0 0Burst Data Rate.................................. 0 0Burst Realtime Data Rate......................... 0 0Per-Client Rate Limits........................... Upstream DownstreamAverage Data Rate................................ 0 0Average Realtime Data Rate....................... 0 0--More-- or (q)uitBurst Data Rate.................................. 0 0Burst Realtime Data Rate......................... 0 0Scan Defer Priority.............................. 4,5,6Scan Defer Time.................................. 100 millisecondsWMM.............................................. AllowedWMM UAPSD Compliant Client Support............... DisabledMedia Stream Multicast-direct.................... DisabledCCX - AironetIe Support.......................... DisabledCCX - Gratuitous ProbeResponse (GPR)............. DisabledCCX - Diagnostics Channel Capability............. DisabledDot11-Phone Mode (7920).......................... DisabledWired Protocol................................... NonePassive Client Feature........................... EnabledPeer-to-Peer Blocking Action..................... DisabledRadio Policy..................................... AllDTIM period for 802.11a radio.................... 1DTIM period for 802.11b radio.................... 1Radius Servers Authentication................................ Disabled Accounting.................................... Disabled Dynamic Interface............................. Disabled Dynamic Interface Priority.................... wlanLocal EAP Authentication......................... Disabled--More-- or (q)uitSecurity 802.11 Authentication:........................ Open System FT Support.................................... Disabled Static WEP Keys............................... Disabled 802.1X........................................ Disabled Wi-Fi Protected Access (WPA/WPA2)............. Enabled WPA (SSN IE)............................... Disabled WPA2 (RSN IE).............................. Enabled TKIP Cipher............................. Disabled AES Cipher.............................. Enabled Auth Key Management 802.1x.................................. Disabled PSK..................................... Enabled CCKM.................................... Disabled FT-1X(802.11r).......................... Disabled FT-PSK(802.11r)......................... Disabled PMF-1X(802.11w)......................... Disabled PMF-PSK(802.11w)........................ Disabled FT Reassociation Timeout................... 20 FT Over-The-DS mode........................ Enabled GTK Randomization.......................... Disabled SKC Cache Support.......................... Disabled--More-- or (q)uit CCKM TSF Tolerance......................... 1000 WAPI.......................................... Disabled Wi-Fi Direct policy configured................ Disabled EAP-Passthrough............................... Disabled CKIP ......................................... Disabled Web Based Authentication...................... Disabled Web-Passthrough............................... Disabled Conditional Web Redirect...................... Disabled Splash-Page Web Redirect...................... Disabled Auto Anchor................................... Disabled FlexConnect Local Switching................... Disabled flexconnect Central Dhcp Flag................. Disabled flexconnect nat-pat Flag...................... Disabled flexconnect Dns Override Flag................. Disabled FlexConnect Vlan based Central Switching ..... Disabled FlexConnect Local Authentication.............. Disabled FlexConnect Learn IP Address.................. Enabled Client MFP.................................... Disabled PMF........................................... Disabled PMF Association Comeback Time................. 1 PMF SA Query RetryTimeout..................... 200 Tkip MIC Countermeasure Hold-down Timer....... 60AVC Visibilty.................................... Disabled--More-- or (q)uitAVC Profile Name................................. NoneFlow Monitor Name................................ NoneCall Snooping.................................... DisabledRoamed Call Re-Anchor Policy..................... DisabledSIP CAC Fail Send-486-Busy Policy................ EnabledSIP CAC Fail Send Dis-Association Policy......... DisabledKTS based CAC Policy............................. DisabledAssisted Roaming Prediction Optimization......... Disabled802.11k Neighbor List............................ Disabled802.11k Neighbor List Dual Band.................. DisabledBand Select...................................... DisabledLoad Balancing................................... DisabledMulticast Buffer................................. Disabled Mobility Anchor List WLAN ID IP Address Status ------- --------------- ------802.11u........................................ DisabledMSAP Services.................................. Disabled
(Cisco Controller) >show sysinfoManufacturer's Name.............................. Cisco Systems Inc.Product Name..................................... Cisco ControllerProduct Version.................................. 7.4.110.0Bootloader Version............................... 1.0.1Field Recovery Image Version..................... 6.0.182.0Firmware Version................................. FPGA 1.3, Env 1.6, USB console 1.27Build Type....................................... DATA + WPS
My understanding is that because of the invalid MIC the WLC interpret that the frames are corrupt ?
What could be the problem ?
Thanks for your help !!!!
Kind regards
Philip802.11n and Apple iPad, Cisco Cius tablet, and Apple iPhone 4
Each Wi-Fi enabled phone and tablet that supports 802.11n has specific antenna and channel configurations. Specifications for each device are listed on the manufacturer's website. Because these devices are 802.11n-enabled, they can use 802.11n enhancements such as MIMO and frame aggregation to help improve their upstream and downstream performance. The specifications for the Apple iPad, Cisco Cius, and Apple iPhone 4 follow:
• The Apple iPad is a one-spatial stream (single antenna) 802.11n-enabled device that operates in 2.4- and 5-GHz spectrums using 20-MHz channels.
• The Cisco Cius tablet is a one-spatial stream (single antenna) 802.11n-enabled device that operates in the 2.4-GHz spectrum using 20-MHz channels and the 5-GHz spectrum using 20- or 40-MHz channels.
• The Apple iPhone 4 is a one-spatial stream 802.11n-enabled device that operates in only the 2.4-GHz spectrum using 20-MHz channels.
How to Optimize 802.11n WLANs to Support Wi-Fi Enabled Phones and Tablets
The following steps are recommended to help optimize a Cisco Unified Wireless Network 802.11n deployment to more effectively support the Apple iPad, Apple iPhone 4, Cisco Cius tablet, and other Wi-Fi phones, tablets, or clients with similar wireless profiles. -
Compressing pictures & send to mobile device
hello dear engineer
i have bought labview mobile module to send a webcam pictures from my PC to the mobile device
and i have make a program that sends pictures pixels(in 24bit format) gets from webcam
to mobile decice by TCP/IP commands over wireless connection
but my big problem is the speed. i mean the picturs move so slowly
the picures size are 100Kbyte each one
now please guide me what can I do for it.
and if it is possible to compress the pictures befor sending and decompress them in destination witout loosing quality ? and how?
i have used a .vi program but it dosen't work correctly(you can see in attachment)
I use HTC viva mobile
windows mobile 6.1
200MHz cpu
mobile module toolkit version 2010
ni vision toolkit 2010
labview 2010
best regards
Attachments:
COMPRESS.vi 53 KBHi Ankur,
The error is returned by the GetDetail bapiwrapper of the Notification. (You can reproduce it by executing the same function module in backend with input as notification number).
The reason I think is only open notifications are supposed to sent to mobile device. In this case the notification is closed and hence not sending to client.
There must be some customization for achieving this.. I am not sure though..
Regars
Ajith -
Problem uploading file from mobile device to tomcat server
Hi guys, here's how it goes.
I'm designing a site using JSP for wireless devices like PDAs, Smartphones etc, basically any mobile device that has browser capabilities. There's a page where the user is allowed to upload a file from the mobile device, which works perfectly fine when I access the site using a PC. But when I try to upload a file from a mobile device, ( I tried using a Nokia 6680 ) , there wasn't any error but the file just wasn't stored in my server.
Here's how the upload form looks like :
<FORM name="filesForm" action="ProcessFileUpload.jsp" method="post" enctype="multipart/form-data">
<font size="1" face="arial">File :</font><br>
<input type="file" name="file1" size="10" style="font-size: 9px;"/><br><br>
<input type="submit" name="Submit" value="Upload Files" style="font-size: 9px;"/>
</FORM>Here's the gist of ProcessFileUpload.jsp:
<%
System.out.println("");
System.out.println("Content Type ="+request.getContentType());
DiskFileUpload fu = new DiskFileUpload();
// If file size exceeds, a FileUploadException will be thrown
fu.setSizeMax(1000000);
List fileItems = fu.parseRequest(request);
Iterator itr = fileItems.iterator();
while(itr.hasNext()) {
FileItem fi = (FileItem)itr.next();
//Check if not form field so as to only handle the file inputs
//else condition handles the submit button input
if(!fi.isFormField()) {
System.out.println("NAME: "+fi.getName());
System.out.println("SIZE: "+fi.getSize());
System.out.println(fi.getOutputStream().toString());
// File fNew= new File(application.getRealPath("/"), fi.getName());
File tempFileRef = new File(fi.getName());
File fNew = new File(filepath.toString(),tempFileRef.getName());
String MM_Overall_DRIVER = "org.gjt.mm.mysql.Driver";
String MM_Overall_USERNAME = "****";
String MM_Overall_PASSWORD = "*********";
String MM_Overall_STRING = "jdbc:mysql://localhost:3306/";
Driver DriverRecordset1 = (Driver)Class.forName(MM_Overall_DRIVER).newInstance();
Connection ConnRecordset1 = DriverManager.getConnection(MM_Overall_STRING,MM_Overall_USERNAME,MM_Overall_PASSWORD);
PreparedStatement StatementRecordset1 = ConnRecordset1.prepareStatement("use " + domain);
ResultSet Recordset1 = StatementRecordset1.executeQuery();
filepath.append("/").append(tempFileRef.getName());
StringBuffer fp = new StringBuffer("insert into ");
fp.append(domain).append(".filepaths (path) values ('").append(filepath).append("')");
PreparedStatement ps = ConnRecordset1.prepareStatement(fp.toString());
ps.executeUpdate();
System.out.println(fNew.getAbsolutePath());
fi.write(fNew);
else {
System.out.println("Field ="+fi.getFieldName());
}Basically I store the file uploaded in the tomcat server and the path of the file is saved in a table in MySQL.
When I upload a file using a PC, the tomcat console displays the content type file name yada yada yada. However, when I upload a file from the Nokia 6680, I get just the content type then things just stop there and nothing else happens. No file name no file size whatsoever. The path of the file is not inserted into MySQL and the file is not stored in the server.
Can anyone please enlighten me on this issue and hopefully gimme a solution to this problem? Your help will be greatly appreciated.-bump-
HELPP!?!?!?!?! -
The Creator of an Assigned Tasks is not Updated when Changed from Mobile Device
We have a Shared Mailbox where we create Tasks and assign them to the appropriate engineer. In Outlook, if they open and modify the assigned task, after they have accepted it of course, and then save it, a message is received in the Shared Mailbox with the
update. When that is opened and closed, the task on the Shared Mailbox is updated.
However, if that Task is updated on a mobile device, WP8.1 in this case, the creator does not get a new message with the changes. If the assigned user looks at it in Outlook, he/she will see the changes. But the originator never receives a message
with the changes.
Am I missing something or is this by design? Thank you in advance for any assistance.Anyone?
-
Cant send from mobile number suddenly.
For some reason my messages on my mac and on my iPhone suddenly turned itself off.
I turned it back on on my iphone, but on my mac it wont allow me to send from my mobile number, as it did before.
I dont send/receive from any email address so until it shows up i cant use messages on my mac.
Any advice?
Thanks!only option is to follow http://support.apple.com/kb/ts3899. if that does not work contact btinternet.com
Maybe you are looking for
-
Credit memo net due date is not correct
Hi experts, In most cases the net due date of customers credit memos (posting key 11) is correct based on payment terms but sometimes itu2019s not (e.g. payment terms 30 days end of month but net due date is the same as document date). Any ideas why?
-
IDOC adapter and number of tRFC records
We have idoc inbound scenario file -> XI -> idoc -> R/3. For each file record an IDOC is created. Can somebody explain, why only one tRFC record is created containing all IDOCs? Can you influence with interface config how many tRFC records are create
-
hi, I want to know from where the header details are getting displayed in fbl5n (Choose Settings -> Layout -> Current Header Rows -> Characteristics). I'm not interested in line Items (the structure RFPOS & RFPOSX) but customer line E.g. in KNA1 ther
-
I have a 15" retina macbook pro and a 3-gen appletv, the home sharing, airplay mirroring fuction works fine until I recently switched to another high-speed internet (another router). The airplay icon now only appear on my mbp after I reboot either ro
-
0 quantity in item category of delivery
Dear All, I would like to know the definition of "check quanttiy 0" in item category of delivery. There is 4 options No dialog A Note about the situation B dismiss situation with error message in create / change mode C dismiss situation with erro