Sending HTML email with iPhone with Exchange

Can anyone confirm the way the iPhone sends email with Exchange. We have a disclaimer that attaches to all emails. This discalimer is HTML and is processed on the Exchange server. Anything that sends via Exchange gets processed whether from Outlook Web Access, Blackberry or Outlook itself. However, the iPhone sends out its message with no signature or disclaimer. Any ideas?
Barry

I am using Active Sync. Pop and IMAP are disabled. The disclaimer is applied by Ninja Email Security for Exchange by Sunbelt Software. The disclaimer is policy based against a users mailbox. It works with everything we have tested except the iPhone. It is like the iPhone is sending a plain text message and the disclaimer is not applied to a plain text message. However, OWA sends as plain text and it is applied as html from OWA. We are using Exchange 2003 SP2 and server 2003 SP2.

Similar Messages

Sending HTML email from outlook 2013 exchange it comes broken to non outlook clients.

Hi, when i send out email from my outlook 2013 where is configured Microsoft exchange account it comes broken to gmail clients. All html mail is broken and attachments comes like this file.jpg_ or adobe.pdf_ If i send mail to outlook user
all is good but if client uses something else , they receive broken mail.
Msg comes to gmail clients like this
http://community.office365.com/cfs-filesystemfile.ashx/__key/communityserver-components-userfiles/00-00-39-06-09-Attached+Files/4745.errror.jpg
Without signature and normal phone and email.
Client is using windows 8.1.
I started discussion here http://community.office365.com/en-us/forums/158/p/227602/704778.aspx#704778 but they sent me to your forum. You can read our discussion
and see what i did already.

Hi,
Some question to help narrowing down the causes:
1. Does this issue occur when using Outlook to configure the Gmail account, does the format change?
2. Does this issue also occur when sending HTML emails to other remote domains?
If the emails is fine when opening them on Outlook, it think Exchange does not change anything on the email. The issue occurs depends on how email clients open the email.
Thanks,
Simon Wu
TechNet Community Support

Need to send HTML email from Workflow : problem with sender

Hi all,
i need to send HTML email from my Workflow. I did it but i have a problem with the sender. The sender of email is always the agent responsible of workitem, and i don't want the receiver can answer to sender. So i need to put a false email address like nosender.at.mycustomer.com.
Possible to do that ?
Thanks for your help.
Cheers

Hi rick
How to change the wf-batch to some other name as you mention in previous reply. Can you give some details of that. If i use the function module SO_NEW_DOCUMENT_ATT_SEND_API1 how to change the wf-batch name and if i use send mail step in my workflow how to change wf-batch name.
Regards
vijay

Sending HTML email with SO_DOCUMENT_SEND_API1

Hi all,
I have implemented a function module to send HTML emails with SO_DOCUMENT_SEND_API1.
It works fine, but in every email I have at the end a CRLF which looks not very nice in MS Outlook.
It seems that this will be added to every email in addition to my HTML text.
Has anyone an idea how I can prevent this?
Thanks in advance for your help.
Best Regards,
Marcel

Hi Marcel,
not only you can, you should use CL_BCS for sending of email. Although I expect it to be not too different from the old functions, it points to the object oriented future of SAP/ABAP. At least it should run more stable and SAP recommends to use it as a replacement for old functions.
I came across one blog
[Sending HTML Email from SAP CRM/ERP|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417300%29ID2058700050DB10227264795501776639End?blog=/pub/wlg/2273]
You may be careful with this one: Probably it's not exactly what you need.
The one I love most for its simplicity is this one
[Unknown thus unloved?|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417300%29ID2058700050DB10227264795501776639End?blog=/pub/wlg/3443]
although it does not mention HTML - I think easy for you to adapt. Compared to functional SO_DOCUMENT.. approach the program will shrink.
If you want to understand the concepts behind, nobody explains it better than
[Thomas Jung: Sending E-Mail from ABAP - Version 610 and Higher - BCS Interface|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417300%29ID2058700050DB10227264795501776639End?blog=/pub/wlg/789]
or - if you still feel unsafe in oo environment -
[Sending E-Mail from ABAP - Version 610 and Higher - BCS Interface|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417300%29ID2058700050DB10227264795501776639End?blog=/pub/wlg/15408]
Happy coding!
Regards,
Clemens

I can't send emails on iPhone with my hotmail account. Is it not possible?

I can't send emails on iPhone with my hotmail account. Is it not possible?

I am having the same issue. It started this week. I have 2 email accounts on my phone. One is a hotmail. And the other one is a network solutions email. I can receive from both but not send. I've deleted the accounts and added them back on and nothing. I'm going crazy because one is my work email!

Send HTML emails with ODI

Hi,
I wish to send HTML emails with ODI but it seems not possible with the tool ODISendMail. Do you know a procedure to do it ?
Thank you very much for your answers.
Regards.

Hello,
Thanks but this article decribes an other tool that I don't have in my version. Maybe is it possible to send me the procedure XML to import it ?
There is also a procedure available on the Oracle support (TRT_Send_Jython_HTML_Email.xml) but I don't know where I can download it... Do you ?
Thank you very much

How to send Html Mail through navigateToUrl() with contentType "text/html" for Android ?

Isn't it possible to send Html Mail through navigateToUrl() with contentType "text/html" for Android ? please suggest any workaround
Thanks

AHHHH
What you can do to make HTML for Apple Mail is to make it in an HTML editor, open it with Safari use CMD+i - a new mail message will appear in a moment with the web page in the email body.
You can't do any major editing in Mail, you'll have to go back to the HTML file. But it works.
You can also use Copy (from a web page) and then (Edit) Paste as HTML (that what Paste as HTML is for, not for creating HTML email). You can also user Paste as HTML to copy/paste a HTML email you receive or part of a HTML email.

How to send HTML email to End User using OOTB email processs?

Hi,
We are using OOTB Send email process to send email to end user.
Templates has been created inside /etc/workflow/ProjectName/email folder.
Its working properly for plain text email.but for html template ,It send the email with html tags.
Any pointer on how to write html template for OOTB email process and activate email type as html ?
Thanks
Deepika

Thanks Sham..
I am able to send HTML email following above link.
The problem i am facing is,When i am deploying the code through crxde.Code is working fine.
But using maven deploy..Bundle get activated ..But at line:
messageGateway = this.messageGatewayService.getGateway(HtmlEmail.class);
,it gives null Pointer exception.
Any pointer,why its not working from maven deployment.
Regards
Deepika

How to send html email notification in bpel

hi gurus,
i want to send html email notification from bpel.
before, i already successful send html email with attachment, but when i send an email without attachment, then the body message will turn into a plain text.
as i check from the email accepted, email with attachment will have a mime type "text/html" but if no attachment then it will be "text/plain"
from the bpel configuration, by default the mime type already set to "text/html; charset=UTF-8", below is the sample configuration in my bpel process
[quote]
<copy>
                                <from>string('text/html; charset=UTF-8')</from>
                                <to variable="varNotificationReq"
                                    part="EmailPayload">
                                    <query>ns10:Content/ns10:MimeType</query>
                                </to>
                            </copy>
[/quote]
i think this suppose to be a easy configuration, but i'm not sure whether i miss something in configuration the email process or this is a bugs in bpel.
environment:
linux
jdev 11.1.1.6
do u guys ever facing a same problem or have a solution to this ? please throw some light.
thanks
===
update, i found a temporary solutions.
so i add a attachment from the process design, and then i change it from the source.
[quote]
<copy>
                                <from>
                                    <literal>
                                        <Content xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                            <MimeType xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">multipart/alternative</MimeType>
                                            <ContentBody xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                                <MultiPart xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                                    <BodyPart xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService">
                                                        <MimeType xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/>
                                                        <ContentBody xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/>
                                                        <BodyPartName xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"/>
                                                    </BodyPart>
                                                </MultiPart>
                                            </ContentBody>
                                        </Content>
                                    </literal>
                                </from>
                                <to variable="varNotificationReq"
                                    part="EmailPayload">
                                    <query>ns10:Content</query>
                                </to>
                            </copy>
<copy>
                                <from>string('text/html; charset=UTF-8')</from>
                                <to variable="varNotificationReq"
                                    part="EmailPayload">
                                    <query>ns10:Content/ns10:ContentBody/ns10:MultiPart/ns10:BodyPart[1]/ns10:MimeType</query>
                                </to>
                            </copy>
                            <copy>
                                <from>string('your message')</from>
                                <to variable="varNotificationReq"
                                    part="EmailPayload">
                                    <query>ns10:Content/ns10:ContentBody/ns10:MultiPart/ns10:BodyPart[1]/ns10:ContentBody</query>
                                </to>
                            </copy>
[/quote]
make sure you put the mime type multipart/alternative into the email payload content. by default, when you add attachment, it will generate mime type multipart mixed automatically.
if you don't change it to multipart/alternative, your email will show a attachment, but actually your email doesn't contain any attachment.
and then for the message and mimetype make sure you have that ns10:bodypart, because this email already been set as a multipart email.
when you add attachment, by default it will generate 2 body part, first one is for the body message and the second one is for the attachment. since i only want to use the body message only, then i have to erase the second bodypart
with this workaround, i can send a html email without attachment perfectly.
but i have to take note, when i updating the email process from process design, then the source will be generated again automatically, and the edited one will be replaced.
thanks.

Make sure you upload all of the images used in your email to a server you control. Then, change your image paths to point to those uploaded images with absolute links.
You will get marked as spam if you attempt to send images as attachments to a large list of recipients and most email clients won't download images to begin with, so make sure your html email makes sense with broken pictures.
CSS support is spotty across email clients, if you use css, make sure it's inline, not embedded in the <head> or externally linked in the <head>. Some email clients strip out the <head> section entirely.
Basically, you need to design your html email as if you haven't moved out of the 90's yet, as far as web design is concerned, in order to get maximum cross client compatibility.
Then, when you're ready, I would suggest using a service like www.icontact.com or www.constantcontact.com if your subscriber list is anywhere over 100 or so recipients.

How to send html email made in dreamweaver

how to send html email made in dreamweaver

Make sure you upload all of the images used in your email to a server you control. Then, change your image paths to point to those uploaded images with absolute links.
You will get marked as spam if you attempt to send images as attachments to a large list of recipients and most email clients won't download images to begin with, so make sure your html email makes sense with broken pictures.
CSS support is spotty across email clients, if you use css, make sure it's inline, not embedded in the <head> or externally linked in the <head>. Some email clients strip out the <head> section entirely.
Basically, you need to design your html email as if you haven't moved out of the 90's yet, as far as web design is concerned, in order to get maximum cross client compatibility.
Then, when you're ready, I would suggest using a service like www.icontact.com or www.constantcontact.com if your subscriber list is anywhere over 100 or so recipients.

Can i send html emails from my Nokia 5530XM?

Hi,
I thought I had a font problem with the emails I sent but I´ve realized that emails sent from the phone are plain text with a UTF8 encoding.
Is there any way I can send html emails, maybe using a different font for sending then? I use the inbuilt messaging that came from the phone, i´ve read somewhere around there´s a Nokia email client application, but I don´t know where to find it, if it can be used on a Nokia 5530 and if it does, can both Messaging and email clients coexist?
Thanks in advance for your help and best regards,
L.

According to AOL they support IE, Firefox, and Safari: http://help.aol.com/help/microsites/microsite.do?cmd=displayKC&docType=kc&extern alId=73451
Have you tried contacting there support to see if they are aware of the issue: http://help.aol.com/help/microsites/microsite.do

Sending HTML email to Lotus Notes

Guys,
We have to send en email to our customers in an intra net site. And our SMTP server is Lotus Notes. When ever I send html email, it is sent as attachment. Here is why that happens with html email:
http://www-1.ibm.com/support/docview.wss?rs=899&uid=swg21088385
Now I am looking for alternative ways to send html email using Java Mail to Lotus Notes client. My last option is RTF or plain text. But still how do I manager the URL links.
Thanks

Well, It sounds like you already answered your own question.
Answer
In Domino� 6.x and later, the following notes.ini settings are enabled by default for any user that has a setting of
"Prefers Notes Rich Text" in the "Format preference for incoming mail" field in the user's Person document:
MIME_Convert_HTML_To_Attachment=1
MIME_Convert_Alternates=0No matter what you code on your side. If you send your messages as HTML the Lotus Notes Mail Server will convert the the HTML to Attachments.

Cgiemail and sending html emails

Anyone out there know how to send an html email
using cgiemail? From what I have found on web there needs to be
something special in the header???? I know how to send just .txt
emails but client wants to send html email regardless how much I
warned them on spam and html emails. Any help would be greatly
appreciated. I have exhausted my search for the answer on the web
other than it can be done.
Thanks bunches! skh

You will need to do your homework.
Look at the properties (headers) of an html email you
received.
Read the SMTP RFCs.
Test your email through programs like Spam Assassin.
Test your email in various email programs.
Good luck.
-Rb

B1if Sending HTML Email

Is it possible to send HTML emails through a sndEmail atom? If so, how do we configure the atom?

Hello All,
Regarding to the mail adapter, here are some updates:
1. B1i will support sending HTML attachemnt via "Send Email" atom in B1 882 PL09. An example here:
<attachment doc="test.htm" pltype="htm">
<![CDATA[<html>
<head>
<title>Enter the title of your HTML document here</title>
</head>
<body>
<p>Enter the body text of your HTML document here</p>
</body>
</html>]]>
</attachment>
2. In addition, B1i will support sending binary attachment and sending html content in Q1,2013.
Thanks & Best Regards,
Qiaoli

Can not send any email from IPhone 5, I get......A copy has been placed in

Can not send any email from IPhone 5, I get......A copy has been placed in
your Outbox. The sender address "jvcrews@" has been rejected
by the server.
<Email Edited by Host>

I have the same problem, but I can send and receive e-mails from my home base. When out of the range of my home I get this message: "
A copy has been placed in your outbox. The sender address: "[email protected]" was rejected by the server."

Send email from iPhone with my iCloud alias

Hi,
My iCloud account is, let's say: [email protected]
I created an alias, let's say: [email protected]
I would like to use "[email protected]" on my iPhone and iPad but that seems impossible.
1. i tried "add a new account" with "[email protected]": i'm said my password is not valid
2. i tried to modify my current iCloud account: impossible, everything is greyed, the only way would be to delete the current, default iCloud account.
So, what can be done in order to send an email on my iPhone from "[email protected]"?
Thanks.

No problem Scottie, you did your best indeed ;-)
Yes I tried to login on icloud.com, no problem at all.
What's more, before posting (starting the present thread), I'd called AppleCare: they certified there was no problem to set up an alias on my iPhone. Now I don't get time to talk with them again. Enough is enough.
And just for the record: right after reentering my default "[email protected]" account details into my iPhone, i got an email from Apple saying "somebody" had done so on my iPhone and I'd better change my password!
That means, at least to my opinion, that aliases are not taken into account at all by Apple on iDevices. The only thing that matters is our default "[email protected]".
One more thing: why do I want an alias? Because as a former .mac and .mobileme customer I'm NOT ALLOWED BY APPLE to change my iCloud account name for a new one.
This is a shame. My "[email protected]" name was meant for the entire family in the times of MobileMe. Now this "[email protected]" doesn't mean anything since iCloud accounts are INDIVIDUAL accounts.
Apple are therefore harming their long-time, faithfull customers while somebody who was not a former MobileMe customer can change his/her iCloud account's name very easily. This doesn't make sense, I think.
Hope that's clear.

Sending HTML email with iPhone with Exchange

Similar Messages

Maybe you are looking for