Sending in Micro For Rep

Well I am sending in my Micro for the headphone jack repair tomorrow. My unit is 4 months old. Creative says they may need to contact me if my unit is out of the warranty period to charge me to fix it. Can't wait to see how much that will be. This unit already cost me $220. Now with their charges plus shipping. This is going to be a $260 plus player easy! They also said that they are out of my choices for color. I say Creative should issue a recall on all players that were built without the so called "stronger" headphone jacks. Also I think everyone who has to send theirs in for this type of repair (since they aren't having a recall) should be upgraded to the 6GB models for our troubles. This is a widely known issue and nothing is being done about it. I know things go wrong in mass production. No big deal. Just own up to it. Quit having all of us be the "Ginny Pigs". I am now looking at a couple of weeks without my music.
I hope that this is just a panic attack and all will be ok! LOL!!
Skee

Creative has fixed them past the 90 warranty without charge, so ask for a supervisor if they tell you to pay...search the posts and you will find references to back you up. Good Luck!

Similar Messages

Address to Send Product for Rep

I have a Creative Zen Micro, 6 GB, that continually freezes. I need to send it in for repair, not warranty repair, just repair that I will pay for. What U.S. Postal Address do I send the product to?

Thank you for taking the time to reply to my posting. I am now on hold with Customer Support ... hopefully it won't be too long. I've already been holding 0 minutes.

Why do not Apple send a fix for all fail´s / slow mac`s afther upgrade to Yosemite

I have upgrade 2 of my Macbook air 11" models. Both have major slow functionality in allmost every programs. slow mail, safari, pages. Allmost nothing of the funksjonalitys can being uses in numbers. Slow functionality when jumping between programs. Allover i have BIG problems with mac for my first time. And why do not Apple send a fix for all fails there is after upgrading to Yosemite. When thousand of users have the same problem with major slow mac`s.
Here is a test for my mac.
EtreCheck version: 2.1 (101)
Report generated 4. desember 2014 kl. 22.48.33 CET
Hardware Information: ℹ️
MacBook Air (Verified)
MacBook Air - model: MacBookAir6,1
1 1.7 GHz Intel Core i7 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel HD Graphics 5000 -
Color LCD 1366 x 768
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:12:8
Disk Information: ℹ️
APPLE SSD SM0512F disk0 : (500,28 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 496.30 GB (371.41 GB free)
Core Storage: disk0s2 499.42 GB Online
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store
Kernel Extensions: ℹ️
/Applications/Parallels Access.app
[not loaded] com.parallels.virtualsound (1.0 18 - SDK 10.6) [Support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Support]
/Library/Application Support/Kaspersky Lab/KAV/Bases
[not loaded] com.kaspersky.kext.kimul.38 (38) [Support]
/Library/Extensions
[loaded] com.silex.driver.sxuptp (1.10.9 - SDK 10.8) [Support]
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.2.61 - SDK 10.6) [Support]
[not loaded] com.freecom.driver.BoulderScsi (1.0.0d1) [Support]
[not loaded] com.kaspersky.kext.klif (2.2.1d19) [Support]
[not loaded] com.zg.driver.ZGUSBCDCACMData (1.5) [Support]
[not loaded] com.zg.driver.ZGUSBMassStorageFilter (1.5) [Support]
[not loaded] com.zg.driver.cdc_ecm_qmi (1.9) [Support]
[not loaded] com.zg.driver.cdc_usb_bus (1.9) [Support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.2.61 - SDK 10.6) [Support]
[not loaded] com.devguru.driver.SamsungACMData (1.2.61 - SDK 10.6) [Support]
[not loaded] com.devguru.driver.SamsungMTP (1.2.61 - SDK 10.5) [Support]
[not loaded] com.devguru.driver.SamsungSerial (1.2.61 - SDK 10.6) [Support]
Launch Agents: ℹ️
[running] com.brother.LOGINserver.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[failed] com.kaspersky.kav.plist [Support] [Details]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.parallels.mobile.dispatcher.launchdaemon.plist [Support]
[failed] com.parallels.mobile.kextloader.launchdaemon.plist [Support] [Details]
User Launch Agents: ℹ️
[running] ca.indev.MailTagsHelper.agent.plist [Support]
[loaded] com.facebook.videochat.[redacted].plist [Support]
[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.ltvbit.plist [Support]
[running] com.genieo.completer.update.plist Adware! [Remove]
[not loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
[loaded] com.parallels.mobile.startgui.launchagent.plist [Support]
User Login Items: ℹ️
iTunesHelper ProgramHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
fuspredownloader ProgramHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 71 Check version
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
nplastpass: Version: 3.1.61 [Support]
JavaPlugin2_NPAPI: Version: Unknown
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
userinternetplugins ℹ️
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
Facebook Cleaner
Pin It Button
LastPass
ResizeMe
OpenIE
3rd Party Preference Panes: ℹ️
Cineform [Support]
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 496.30 GB Disk used: 124.90 GB
Destinations:
Data [Network]
Total size: 3.00 TB
Total number of backups: 65
Oldest backup: 2013-08-15 20:20:51 +0000
Last backup: 2014-12-04 17:20:31 +0000
Size of backup disk: Excellent
Backup size 3.00 TB > (Disk size 496.30 GB X 3)
Top Processes by CPU: ℹ️
     4% WindowServer
     1% fontd
     1% cloudd
     0% Safari
     0% launchd
Top Processes by Memory: ℹ️
369 MB com.apple.WebKit.WebContent
155 MB Safari
103 MB Feedback Assistant
86 MB Finder
69 MB mds_stores
Virtual Memory Information: ℹ️
4.52 GB Free RAM
2.60 GB Active RAM
652 MB Inactive RAM
820 MB Wired RAM
1.04 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 4, 2014, 10:37:00 PM Self test - passed

[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.ltvbit.plist [Support]
[running] com.genieo.completer.update.plist Adware! [Remove]
[not loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
Your machine is slow because you loaded a bunch of third party junk on it.

How do I add a number to my Send Read Receipts for iMessage

How do i add a number to my Send Read Receipts for iMessage. It says I can add a email just not a number!

Link phone number and Apple ID with FaceTime and iMessage
http://support.apple.com/kb/HT5538

ERROR in PI : No sender agreement found for , , , , ,

Hello everybody,
i'm working with SAP PI 7.1
it's a new installation.
I created the first easy interface JDBC-Pi-File.
when i activate the CC i don't see any message in SXMB_MONI but in RWM i see the messages in Waiting status and when i look inside i see the follow error:
SOAPFAULT received from Integration Server. ErrorCode/Category: XIServer/INBOUND_BINDING_ERROR; Params: BS_CSIS_DEV, http://xxxx.com/test, SI_DB2SP_DOCUMENTS_AA_02; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Error in sender agreement for party , service BS_CSIS_DEV, interface namespace http://xxx.com/test interface SI_DB2SP_DOCUMENTS_AA_02 No sender agreement found for , , , , ,
1-Configuration is ok. I create all steps and sender Agreement exist
2-end point http://yyyyy:50100/sap/xi/engine?type=entry is correct and the same in SLD and sxmb_adm -> Integration Engine Configuration
3-i suppose 50100 port is correct because when i try to use 8010 port i have a different error.
4- i alreadi used CPA cache refresh and SXI_CACHE.
Any suggestion?
thanks

after 20 minuts i retry.
Now the error message is changed:
Transmitting the message to endpoint http://yyyyyy:8010/sap/xi/engine?type=entry using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection refused.
Edited by: apederiva on Aug 25, 2010 11:35 AM

How do I Automatically Send a PDF for Shared Review?

Hello,
I am trying to automate sending documents for shared review. Basically, all my users post PDFs to the same location and so they perform all the same actions. I would like to make it easier on them and automatically trigger all the actions. Currently, I am using Acrobat.dll in a C# program, but I am not adamant about using this particular technology. All I could get was:
Acrobat.AcroAppClass acro = new Acrobat.AcroAppClass();
acro.MenuItemExecute("SendForSharedReview");
This opens the shared review wizard, and I can send keystrokes to the wizard dialog box, but I am hoping there is a more elegant method of doing it. Is there an API that I should be using or some other method to automatically trigger a shered review on a selected document?
Thanks,
Pawel

It took a while to figure out, but I confirmed it with Adobe staff. The answer is no; sending multiple documents for shared review is not possible with LiveCycle or with any other Adobe software.
The only thing to do would be automate with some kind of clicker application or AutoIt, but that is far from ideal.

Good morning a few weeks ago I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back, and I can not return it , i need to you sent me again the box for retu

Good morning a few weeks ago I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back, and I can not return it , i need to you sent me again the box for return the ipod

Best thing would be to call Apple up again, and let them what has happened and they'll help you!

SharePoint 2013 - SPD Custom Workflow keeps sending multiple emails for a single Task

I have a workflow triggering on List item created only. There are multiple stages in the work flow and in each stage a single task is assigned to a group of people. Currently group is only having one user i.e. my own test user with a valid email address.
Workflow was running fine for first 5 runs but now it keeps sending multiple emails for each task multiple times and runs very slow. I have only single workflow in development server with 24GB RAM.
Enabling the Workflow log in Event viewer does not show any error or warnings. The only clue I see is WorkFlowManager Database table "DebugTrace" having multiple entries showing that WF is trying to send same email multiple times with failed attempts,
but in reality emails are being delivered as well.
http://server/site/_vti_bin/client.svc/sp.utilities.utility.SendEmail Retry sending email in xx.xx.xx Status: HTTPRetrying
http://server/site/_vti_bin/client.svc/sp.utilities.utility.SendEmail Retry sending email in xx.xx.xx Status: HTTPFailed
I could not get the exact phrase as I don't have direct access to development machine at work.
Any help or guidance will be highly appreciated.

Yes, I have on-premise SP site, and here is the actual log I see in DebugTraces table.
Message              Level     Name    Category
Attempt 1 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' failed with response '<Exception.
No Status Code>'.              2              HttpRequestFailed          Http
Attempt 2 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' will be made in 00:00:06.
2              HttpRequestRetrying     Http
Attempt 2 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' failed with response '<Exception.
No Status Code>'.              2              HttpRequestFailed          Http
Attempt 3 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' will be made in 00:00:07.
2              HttpRequestRetrying     Http
Attempt 3 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' failed with response '<Exception.
No Status Code>'.              2              HttpRequestFailed          Http
Attempt 4 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' will be made in 00:00:09.
2              HttpRequestRetrying     Http
Attempt 4 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' failed with response '<Exception.
No Status Code>'.              2              HttpRequestFailed          Http
Attempt 5 of the HTTP request to 'http://site/collection/_vti_bin/client.svc/sp.utilities.utility.SendEmail' will be made in 00:00:13.
2              HttpRequestRetrying     Http

How to send multiple data for a single element

Hi All,
I have a requirement where I have to send multiple data for single element per single transaction. For example
Id details
1 abcd
1 efgh
1 def
Now, when I am selecting this ID from database, I have to get all the details in a single xsd like
<id>1</id>
---><details>abcd</details>
<details>efgh</details>
<details>def</details>
Thanks

Hi,
The following XSLT...
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:template match="/">
<xsl:variable name="root" select="/"/>
<root>
<xsl:for-each select="distinct-values(/root/entry/id)">
<xsl:variable name="id" select="."/>
<entry>
<id><xsl:value-of select="$id"/></id>
<xsl:for-each select="$root/root/entry[id = $id]">
<details><xsl:value-of select="details"/></details>
</xsl:for-each>
</entry>
</xsl:for-each>
</root>
</xsl:template>
</xsl:stylesheet>Will work for a document like this...
<root>
<entry>
<id>1</id>
<details>detail1</details>
</entry>
<entry>
<id>1</id>
<details>detail2</details>
</entry>
<entry>
<id>2</id>
<details>detail3</details>
</entry>
</root>Hope this helps...
Cheers,
Vlad

Sender Communication Channel for Integration Scenario IDoc - XI - IDoc?

Hello All,
One general question. I have to configure an IDoc - XI - IDoc Scenario. For this Scenario I have to configure an Receiver Communication Channel (IDoc Adapter) to the Backend System but what about Sending Communication Channel for the Sending R/3 system.
Is the (IDoc) Communication Channel from Sending system to XI required to configured?
Many thanks in advanced!
Jochen

Hi Jochen,
for sending IDOCs from SAP to XI, sender IDOC adapter is not required. when XI will send the IDOC to a SAP system, then receiver IDOC adapter is needed.
Thanks,
Rajeev Gupta

Stored procedure : how to call SP in sender JDBC adapter for mysql

HI friends ,
we have JDBC---->XI--
>SAP scenario. For some business requirement, we have to call STORED PROCEDURE , please let me know how to call SP in sender JDBC adapter for mysql .
Thanks
mojib

Hi Mojib,
Please create a sample stored procedure like this which contains select statement and in communication channel give
wite stored procedure name only to sql query statment and in update statement write <test>.
I am executing this stored procedure successfully.
Create Proc GetResultX As
Begin
Select * From TESTX
End
Execute statement for stored procedure is :
Exec GetResultX
Regards
Laxmi Bhushan Jha
Rewards point if found usful
I have given same answer to one of the same thread

Today is April 10, 2013. I try to login to iTunes connect and I keep getting the message "An error has occurred processing your request. Please try again later or send an email for assistance." It never tells us what email address we need to write to.

Today is April 10, 2013. I try to login to iTunes connect and I keep getting the message "An error has occurred processing your request. Please try again later or send an email for assistance." It never tells us what email address we need to write to.

The problem was solved by Apple Technical Help. The process is as flollows:
1. Open Safari
2. Menu item Safari-Reset Safari - remove all website data - reset
3. Now if you try to login on iTunes connect it will work.

How do I send a link for a keynote presentation like I previously did with MobileMe?

how do I send a link for a keynote presentation like I previously did with MobileMe?

Keynote should work ok with Lion. Are you running the latest version?
http://support.apple.com/kb/DL1477

HT5312 Every time I click send e-mail for instructions on resetting my security questions, I don't get them? I just want to play minecraft. I already put $15 in my balance and I can't even spend it. Thank you for taking the time to read this.

Why is it, every time I click send e-mail for instructions on resetting my security questions, I don't get them? I just want to play minecraft. I already put $15 in my balance and I can't even spend it. Thank you for taking the time to read this.

Either they're being sent to a different email address, or got caught in a spam filter, or something's wrong at Apple's end. If you can't find the email, you need to ask Apple to reset your security questions, which can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
(105723)

Can any one send select query for this?

Hi,
can any one plese send select query for the following query.please send as early as possible.
Loop through the I_BSID internal table to fill records in I_OUTPUT.Combine data from I_BSID, I_KNKK, I_KNKK_KNKLI, I_KNA1 and I_KNVV into I_OUTPUT based on the linking conditions .Field Description Source are
I_OUTPUT-BUKRS     Company code     I_BSID-BUKRS
I_OUTPUT-KUNNR     Customer number     I_BSID-KUNNR
I_OUTPUT-NAME1     Customer Name     I_KNA1-NAME1
I_OUTPUT-KNKLI     Credit account     I_KNKK-KNKLI
I_OUTPUT-KDGRP     Customer Group     I_KNKK-KDGRP
I_OUTPUT-KLIMK     Credit Limit     I_KNKK_KNKLI-KLIMK
I_OUTPUT-KVGR1     Business Unit     I_KNVV-KVGR1
I_OUTPUT-REBZG     Invoice Number     I_BSID-REBZG
I_OUTPUT-BLDAT     Invoice Date     I_BSID-BLDAT
I_OUTPUT-WAERS     Document Currency     I_BSID-WAERS
I_OUTPUT-DUE_DATE     Due Date     Based on below
Calculation
Get the Payment terms days combining I_BSID and I_T052 based on the linking conditions mentioned above.    Note : a) Baseline Date : If baseline date I_BSID-ZFBDT is blank , use the Document Date.b) Payment Term Days :If I_BSID-ZBD3T is not blank, take this as Payment Term Days for Due date calculation.
                   If I_BSID-ZBD3T is Blank, then get payment term days from I_T052 based on I_BSID-ZTERM. If there are more than one record in I_T052 for the given Payment term, get the day part from baseline date and select the first record where the day limit I_T052-ZTAGG is greater than the day part.If I_BSID-ZBD3T is blank and I_BSID-ZTERM is also blank, then take Y000 (Due Immediately) as Payment term and proceed with the above logic. Set the payment term field blank while printing.
Calculate Due date : For Debits, Determine Due Date = Baseline Date + Payment term Days(not discount days)                                                          For Credits Due date = Baseline date.Then, move the amount I_BSID-DMBTR to respective buckets (Not yet Due, Current Due, Past due 1-30, Past Due 31-60 etc.) Based on the due date.
Thanks&Regards,
praveen kumar.A

HI,
To get Open Items you can use Function module:
data:i_items TYPE STANDARD TABLE OF rfpos.
CALL FUNCTION 'CUSTOMER_OPEN_ITEMS'
EXPORTING
bukrs = p_bukrs
kunnr = wa_customer-kunnr
TABLES
t_postab = i_items
EXCEPTIONS
no_open_items = 1
OTHERS = 2.
Table I_items will have all the open items for that Customer in the given company code.
Well for Clear Items: Try
GET_CLEARED_ITEMS or FMITPOFM_CLEARED_ITEMS_GET.
Hope it helps.
Manish

Sending in Micro For Rep

Similar Messages

Maybe you are looking for