Sending info. from SAP R/3 HR to SAP CRM
Hi everyone , I`m trying to send information from my R / 3 system to CRM`s bp using <i>PFAL</i> transaction . But when I entered the information requiered for this I got the error "No data found for search conditions" I`m pretty sure I should get information for the employee . What can I do ? I dont why there are diferents conditions between some employees ? I`m using infotype 1000.What Can I check ? plz hlp.
Hi Ali,
Try to enter the number and press the search - help button. Or just F4. If this does not yield any results, enter stars on both ends of the empoyee number.
If the number is not found, the number just isn't there
Award points if this helps.
Regards,
Martin Kuma
Similar Messages
-
Function module to send mail from SAP
Can any one please tell the Function module to send mail from SAP. The scenario is like this,I have a file in local system that i have to send to a particular mail address like [email protected] through a report program.
Hi shafiq,
1. There is some trick involved
in the binary files.
2. I have made a program (and it works fantastic)
ONLY 6 LINES FOR EMAILING
BELIEVE ME
ITS A FANTASTIC PROGRAM.
IT WILL WORK LIKE OUTLOOK EXPRESS !
3. The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
regards,
amit m. -
Send mail from SAP system to another SAP system
Hello Xperts
I need to send a mail from one SAP box (ECC) to another SAP box (SRM,CRM, EP etc). I know how to send mail from SAP to external address but unable to find the parameters in this case. Kindly help.
thkx
Prabhu
PS: Kindly DONOT post on "How to send mail from SAP" as my questions is all abt how to send mail from one sap system to another sap systemHi
To send mail Internally check this sample code it works fine this code was developed by me
*& Report ZMATURITYREPORT *
*& Title - Maturity report *
*& ABAP/4 Consultant *
*& Name- Pavan Praveen Valluri Created on 26/07/2007 *
*& Module - FI *
REPORT ZMATURITYREPORT.
tables: bseg.
* SELECTION SCREEN--------------------------------------------------- *
parameters: p_email type somlreci1-receiver default
'@gujaratpetro.com'.
* Data: p_email(25) type c value '[email protected]'.
* END OF SELECTION SCREEN ------------------------------------------- *
*----------DATA DECLARATION--------------------------------------------*
data: it_message type standard table of solisti1 initial size 0
with header line.
data: it_message1 type standard table of solisti1 initial size 0
with header line.
data: it_message2(10) type N.
data: it_message3 type standard table of solisti1 initial size 0
with header line.
data: it_message4 type standard table of solisti1 initial size 0
with header line.
data: it_attach type standard table of solisti1 initial size 0
with header line.
data: text(150).
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1,
gd_error type sy-subrc,
gd_reciever type sy-subrc.
start-of-selection.
data: lv_date type sy-datum.
data: lv_date1 type sy-datum.
data: lv_formatdate(10) type c.
data: lv_formatdate1(10) type c.
data: var1(4) type c,
var2(2) type c,
var3(2) type c.
data: begin of int_bseg occurs 0,
BELNR LIKE BSEG-BELNR,
ZUONR LIKE BSEG-ZUONR,
GJAHR LIKE BSEG-GJAHR,
DMBTR LIKE BSEG-DMBTR,
HKONT LIKE BSEG-HKONT,
end of int_bseg.
data: begin of int_SKAT occurs 0,
TXT50 LIKE SKAT-TXT50,
SAKNR LIKE SKAT-SAKNR,
KTOPL LIKE SKAT-KTOPL,
end of int_SKAT.
data: begin of int_bkpf occurs 0,
BELNR LIKE BKPF-BELNR,
BUKRS LIKE BKPF-BUKRS,
GJAHR LIKE BKPF-GJAHR,
BUDAT LIKE BKPF-BUDAT,
end of int_BKPF.
data: 2days_out type sy-datum.
2days_out = sy-datum + 2.
data: var4(4) type c,
var5(2) type c,
var6(2) type c.
*-------- END OF DATA DECLARATION--------------------------------------*
*--- CONCATENATING AND ARRANGING DATE ---------------------------------*
lv_date = 2days_out.
var1 = lv_date+(4).
var2 = lv_date+4(2).
var3 = lv_date+6(2).
concatenate var3 var2 var1 into lv_formatdate separated by '.'.
*--- END OF CONCATENATING AND ARRANGING DATE -------------------------*
*-------------------------SELECTION FOR BSEG---------------------------*
select zuonr belnr bukrs GJAHR DMBTR HKONT from bseg into
corresponding fields of table int_bseg
where bukrs = 'company name' and
ZUONR = lv_formatdate.
*--------------END OF SSELECTION FOR BSEG--------------------------- *
*-------------------------SELECTION FOR BKPF---------------------------*
select BUDAT BUKRS BELNR GJAHR from BKPF into
corresponding fields of table int_BKPF
where bukrs = 'company name'.
append int_BKPF.
*------------------END OF SELECTION FOR BKPF---------------------------*
*-------------------------SELECTION FOR SKAT---------------------------*
select SAKNR TXT50 from SKAT into
corresponding fields of table int_SKAT
where KTOPL = 'company name'.
*and SAKNR = INT_BSEG-HKONT.
APPEND INT_SKAT.
*--------------END OF SSELECTION FOR SKAT--------------------------- *
*-----------------POPULATING EMAIL SUBJECT ----------------------------*
perform populate_email_message_body.
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Maturity after 2 days'
'XLS'
'filename'
changing gd_error
gd_reciever.
* Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*endif.
end-of-selection.
*------------END OF POPULATING EMAIL SUBJECT --------------------------*
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
data: ld_error type sy-subrc,
ld_reciever type sy-subrc,
ld_mtitle like sodocchgi1-obj_descr,
ld_email like somlreci1-receiver,
ld_format type so_obj_tp ,
ld_attdescription type so_obj_nam ,
ld_attfilename type so_obj_des ,
ld_sender_address like soextreci1-receiver,
ld_sender_address_type like soextreci1-adr_typ,
ld_receiver like sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
** Fill the document data and get size of attachment
clear w_doc_data.
read table it_attach index w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + strlen( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
clear t_attachment.
refresh t_attachment.
t_attachment[] = pit_attach[].
* Describe the body of the message
clear t_packing_list.
refresh t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
append t_packing_list.
* Add the recipients email address
clear t_receivers.
refresh t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
append t_receivers.
call function 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
object_header = t_object_header
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
loop at t_receivers.
ld_receiver = t_receivers-retrn_code.
endloop.
endform. "send_file_as_email_attachment
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
* Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
* Populate message body text
form populate_email_message_body.
refresh it_message.
refresh it_message1.
refresh it_message3.
refresh it_message4.
*--------------- LOOP FOR BSEG -----------------------------------------
loop at int_BSEG.
read table int_bKPF WITH KEY BELNR = INT_BSEG-BELNR
GJAHR = INT_BSEG-GJAHR.
read table int_SKAT WITH KEY SAKNR = INT_BSEG-HKONT.
*---CHANGING DATE FORMAT FOR BKPF---------------------------------------
lv_date1 = int_bkpf-budat.
var4 = lv_date1+(4).
var5 = lv_date1+4(2).
var6 = lv_date1+6(2).
concatenate var6 var5 var4 into lv_formatdate1 separated by '.'.
*---END OF CHANGING DATE FORMAT FOR BKPF-------------------------
it_message = int_bseg-belnr.
it_message1 = lv_formatdate1.
it_message2 = int_bseg-dmbtr.
it_message3 = int_bseg-hkont.
IT_MESSAGE4 = INT_SKAT-TXT50.
SHIFT IT_MESSAGE2 LEFT DELETING LEADING '0'.
*-------------POPULATING EMAIL BODY WITH DATA -------------------------
concatenate 'Maturity After 2Days' 'for' 'G/L account-' it_message3
'--' IT_MESSAGE4 ',' 'Amount-' it_message2
into it_message separated by space.
append it_message.
append it_message1.
append it_message3.
clear it_message.
clear it_message1.
clear it_message2.
clear it_message3.
endloop.
*------------END OF LOOP FOR BSEG --------------------------------------
endform. " POPULATE_EMAIL_MESSAGE_BODY
<b><i>
To send an mail with external attachment check this one
</b></i>
<i>first create a Include report with the following coding</i>
*& Include ZPA1_INCLFOR_MAIL *
* Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
* FORM
FORM ml_customize USING objname objdesc.
*----------- Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
*--------- Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
* FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
* FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
* FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
*--------- Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
* IMPORTING
* COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
* Header Data
* Already Done Thru FM
* Main Text
* Already Done Thru FM
* Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
* Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
* Receiver List
* Already done thru fm
ENDFORM. "ml_prepare
* FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
* CONTENTS_HEX = objhex
* OBJECT_PARA =
* object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
* FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
*-------------- Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
*------------- Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
* FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
*-------- Data
DATA : pos TYPE i.
DATA : len TYPE i.
*------------ Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
<b>
Then include that report in the following report and copy the same code and paste it there
</b>
*& Report ZPA_TEMP147 *
REPORT ZPA_TEMP147 .
INCLUDE zpa1_inclfor_mail.
* DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
* SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
* AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
* START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
* FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
* CHECK_DOS_FORMAT =
IMPORTING
* DRIVE =
EXTENSION = extension
NAME = name
* NAME_WITH_EXT =
* PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
<b>These are the FM for sending external email :-</b>
SO_DOCUMENT_SEND_API1
SAPoffice: Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
SAPoffice: Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
SAPoffice: Send new document
<b>Check this sample report</b>
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
* Receivers
receiver_list-recextnam = '[email protected]'. "-->
* EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
* General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
* Mail subject
w_object_hd_change-objdes = 'Message subject'.
* Mail body
APPEND 'Message content' TO message_content.
* Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.
<b>Settings for sending mail</b>
Configuring SAP 4.6x Internet mail Gateway
SAP can be configured to send and receive emails from different sources.This section explains how to integrate SAPOffice with an external emailsystem. Your Internet email must be configured and running prior to this.Email from SAP is forwarded to the users external email system..
You can configure inbound and outbound forwarding. Outbound flow forwardsa SAP message (eg: update termination) via UNIX sendmail to the intended recepient. Inbound accepts a message from sendmail and places it in the users SAPOffice inbox. Many companies prefer to configure outbound only.
Configuring outbound forwarding
SAP configuration
1. Create your RFC destination for outbound email using transaction SM59
RFC Destination : SAP_INTERNET_GATEWAY
Connection Type : T
Description : SAP internet mail gateway
Click on 'Explicit Host' if you wanton demand gateway dameon invocation.
Program : /sapmnt/SID/exe/mlunxsnd
Target Host : Enter hostname that runs your central instance.
Click 'Test Connection' and you should seea successfull message.
2. Shared Office Settings transaction SO16-> Send -> Settings or
directly via transaction SCOT- SAPconnect Administation
Nodes - Create
Node : IMAIL
Description : SAP internet mail gateway
RFC Destination : SAP_INTERNET_GATEWAY
Tick : Internet
Address Area : *
Tick : All formats
Dev. type : Choose an approciate Printer Device
Set further addresstype : N
Maximum waiting timefor repeat send attempt procedure : Blank or decide for yourself
Tick : Node is ready for use
Setting
- DefaultDomain : <your company domain>.com
- Conversionrule : require if your communication device only support one format.
e.g. if you email system only support the format RAW (ASCII text format)
Format To Format Ranking Function module
ALI RAW 1 SX_OBJECT_CONVERT_ALI_RAW (convert APAP List)
Referto note 171698 - SAPconnect: Formats, conversion, device type
UNIX configuration
1 .. cd /sapmnt/SID/exe
2 ..csh
..mlsomadm mailgw.ini
System Name [C11] :
Client [000] :
Username : MAILADM
Password : MAILADM
Language : E
Load Balancing :
Hostname : <hostname>
System number : <instance_number>
Gateway hostname: <central_instance_hostname>
Gateway Service : <instance number>
Use SAP Router :
Trace level :
Sendmail Command [/usr/lib/sendmail -i -f<SENDER_ADDRESS>]:
Codepage [ISO-8859-1] :
Trace Level (Outbound) [0] :
Update file sapmailsid.cfg? [Y]
Testing whether your configuration is successful
1. Logon to SAP
2. Execute transaction SO01
3. Write a message and send it to <your_internet_email_address>
4. If you don't see the mail in your internet mailbox, go back and review steps 1-12
Schedule the SAP Internet Mail Gateway Jobs to start every 5 minutes
1. Create
2. Position your cursor at INT
3. Click Schedule and supply the date and time
4. Click Schedule periodically and tick Minutes and type in 5
5. Click Create and you are done
6. Click Show Scheduling to check
Problems that you might encounter :-
If you have set up a node in SCOT and it tests out well but recieve the reply.
"Cannot process message in node, parameterscannot be converted".
Make sure the RFC connection is working, and that SapConnect has been installed on the Unix Server or the Microsoft Exchange Server. Originally, I had the same error, and found that nothing had been installed on Unixor Exchange, to support SapConnect.
In SCOT (View -> System Status), your mail remains at the Intransit column.
Check you sendmail.cf files (e.g.Sun Solaris /etc/mail/sendmail.cf). Try using the sendmail command to send a test file at the Unix level. You must be able to send mail at theUnix level before you can send mail at the SAP level.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/700b405bacdd5fe10000000a155106/content.htm
http://www.tamboly.com/SAPEmailConfiguration.html
Check my previous links
Mail Send
sending mails from abap program
Mail Sending to external email id's
settings needed for sending emails
Regards
Pavan -
Cannot Send Email from SAP Business One
Hi Experts
I have configured SAP Email Services from the Mailer Service and Customer can send emails all the while,
Now I have an Issue for One User,
Iam using the Same Machine, Same Database with Manager Login, I can send Email from SAP with Attachments
But When I use another Super user the system is not delivering the Email and it Goes to the Sent box (but not delivered)
Have anyone encountered the Issue before
Please hep to solve this issue permanently
Thanks and Regards
Vinodh Kumar MohanHi Vinodh Kumar Mohan,
If the email can be found in Sent box, it must be delivered already.
The problem could be on the email recipient side. It may go to the junk mail.
Thanks,
Gordon -
hiii
<b>Is it possible to send mail from SAP to External user??????if possible does BASIS people had to do something???</b>
I want to send the email from sap to external user([email protected]).My mail will consist of some changes made in production order(CO03). for which i had created the BADI. That part is over now i want to send the mail.
<b>I got many sample programs in sdn but when i enter the email address it execute but mail is not sent.....I want to know by just executing Zprogram mail will be sent or there is some role for BASIS also..............</b>
Thanking you.
Regards.There is a transaction called SCOT that needs to be configured
http://www.sap-basis-abap.com/sapbs035.htm
http://www.sap-img.com/basis/basis-faq.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm -
Send email from SAP using SMTP-AUTH
Dear all,
I would like to send email from SAP to external SMTP server using authenticated method.
Can I set up this scenario with SAPConnect?
Or are there any other methods to set up this scenario?
Thanks, Regards,
FendhyHi,
You dont need anu authentication to be set :
Just follow below steps :
Simple steps to do the SMTP configuration :
1. Use transaction SCOT
3. Double Click on SMTP
4. You will get a window and fill in description
5. Tick the "Node in use" box
6. Enter the hostname of the email exchange server
7. Mail port will be 25
8. Click on the button next to Internet called "Set"
9. You will get another window, in the "address area" box, enter *
10. Click the green check button to exit the second window
11. Click the green check button to exit the main window
12. From top menu: Settings -> Default Domain
13. in the small box that appears enter the domain name which is the last part after the @ sign. The domain name would be company.com
14. You need to define a job to process the email, from top menu: View -> Jobs
15. From top menu: Job -> Create
16. Enter a name
17. Click on "INT" in the list then "Schedule job" button
18. Enter start date and time, then click on "Schedule Periodically" button
19. Enter something like every 10 minutes.
20. the configuration is now complete. To test it, you need to have an email defined in your user id properties. Use SU01 for that.
21. Use transaction SO00
22. Put Title, and text in the body, then enter your email address below, the recepient type would be "internet address"
23. After a maximum of 10 minutes you should get the email address.
Regards,
Nirmal.K -
Error while sending mail from SAP
Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
A RAISE statement in the program "SA
condition "FOLDER_NOT_EXIST".
Since the exception was not intercep
program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
HasanHello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu -
Error while sending mail from SAP to external mail id
Hello Experts,
I am blocked by the below problem.
I am trying to send email from SAP to an external email ID. I have tried using Class approach as well as the function 'SO_DOCUMENT_SEND_API1' for the same.
Everytime i get the following message:
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known. 554 554 <email address> Sender address rejected.
I am not at all able to figure out why this type of error is coming.
The same code is working on the development environment but not on the test system.
Please reply back asap as i am completely blocked due to this.
Thanks/Regards,
HimanshuHello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu -
Message SR 053 when i send idoc from SAp R/3 4.6C to PI 7
Hi,
I try to send idoc from SAP r/3 4.6C to PI 7. I had made ALE configuration in my sender system ( SAP 4.6C) but idocs are not sent to PI. In SM58 i have message "Name or password is incorrect (repeat logon)". Yet i'm sure that user and password are correct because if i test RFC destination using SM59 , test is OK.
Is somebody can help me ?Hi,
In R/3 :
my RFC destination is type 3 and point to XI. The port in the partner profile point to this RFC destination. ( all seems good !).
In Xi : i created a port and i load manually idoc in idx2 to be sure that RFC destination was OK. Nothing in IDX5.
When i send idoc MATMAS using BD10 from R3 to Xi i have something very strange: first the message B1 038 "1 master IDocs set up for message type MATMAS" and just after
the XI logon screen appears !! Then message "1 communication IDoc(s) generated for message type MATMAS" and this idoc stay in SM58 with message "Name or password is incorrect (repeat logon)".
Somebody can give me requires caracteristics for XI user used in R/3 RFC destination ? -
Error in sending mail from SAP to microsoft outlook
Hi all.
Greetings.
I have a requirement to send mail from SAP to Outlook.
SMTP is configured here....i have checked the steps.
I am using FM "SO_NEW_DOCUMENT_SEND_API1" to send the mail text.
when i check the SOST Tcode i got message "Wait for communications service".
after evry 10 minutes the sap connect all process runs..as it is configured in SCOT transaction, but even after 30 minutes the mail is not sent.
I don't know how should i check the error message?
tell me the checking stepls plz?...how should i step through in checking this?
what are the prerequsites for sending mails from SAP to Microsoft outlook?
regards
Prashant Tiwari
Edited by: prashant tiwari on Feb 6, 2009 10:26 AMHi prashant,
Pls refer to the link below:
Re: Inbound Email- SAP Connect
or
check your userid .
If not correct no mail will go from u r id.
Try it with another user id.
or try using the following function module
'SO_NEW_DOCUMENT_ATT_SEND_API1'
I Hope this helps you with the issue.
Thanks
Ravi Aswani -
Problem while sending mail from SAP
Hi ABAP gurus,
I tried to send mail from SAP. For this we configured SMTP Services using the transaction SCOT and all are Completed.
When I send a mail using SAPOffice it is Executing successfully and main is delivered to me.
When I tried in the program using the function module 'SO_NEW_DOCUMENT_SEND_API1' mail is not delivered to me but it is placed in SAPoffice outbox.The status of the mail says "SEND PROCESS STILL RUNNING". Even when i execute SAPconnect manually mail is not transmitted.
This is the transaction history of the mail.
Trans. history
18.02.2006 13:44:31 Document sent
13:44:31 Wait for communications service
After This stage Delivery attempt is not taking place.
This is the Code
****Document DATA
EMAIL_DATA-OBJ_NAME = 'MESSAGE'.
EMAIL_DATA-OBJ_DESCR = SUBJECT.
EMAIL_DATA-OBJ_LANGU = 'E'.
EMAIL_DATA-SENSITIVTY = 'P'.
EMAIL_DATA-OBJ_PRIO = '1'.
EMAIL_DATA-NO_CHANGE = 'X'.
EMAIL_DATA-PRIORITY = '1'.
***Receiver
EMAIL_SEND-RECEIVER = '[email protected]'.
EMAIL_SEND-REC_TYPE = 'U'.
EMAIL_SEND-EXPRESS = 'X'.
APPEND EMAIL_SEND.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = EMAIL_DATA
DOCUMENT_TYPE = 'RAW'
PUT_IN_OUTBOX = 'X'
IMPORTING
SENT_TO_ALL = SENT
NEW_OBJECT_ID = EMAIL_ID
TABLES
OBJECT_CONTENT = EMAIL_TEXT
RECEIVERS = EMAIL_SEND
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Please Help me to solve this Problem.
Regards,
Viswanath Babu.P.DHi viswanath,
1. in scot, in smtp node,
2. press the internet button
3. In ADDRESS AREA,
type
*yahoo.com
*rediffmail.com
etc,etc.
4. Only when such domains are entered,
will sap send mail.
5. It will not send any mail to other domains.
6. Or simply enter *
regards,
amit m. -
General users can not send emails from SAP themselves except sap_all user
Dear experts ,
General users can not send emails from T-CODE: SO00 themselves except the users
which Assigned SAP_ALL Authorization Profiles .
We hit SAPconnect trace Error : SO_OBJECT_MIME_GET Exception: 2 .
No MIME Document Received. Error Code: UNKNOWN .
How to can i solve the problem ?
Thanks a lot in advance .Thanks for your Reply .
I had set default domain in SCOT ,and email address in su01 .
we can send email successful only SAP_ALL users .General users can not send emails from SAP themselves
Is anybody else to help me ?
Thanks a lot in advance . -
Problem with sending mail from SAP (ECC6.0)
Hi guys!!
I am facing problem in sending email from SAP to outlook.
I've checked SICF and SCOT configuration and they are same as my other server thorugh which i am able to send the mail.
I use SBWP to send the mail. after i send i do not get any error message, and when i check it in outbox, there is a yellow triangle in the status which means "send process still running" . so the sending mail is taking hours. i've set the frequesncy of my B/G job RSCONN01 to 10 minutes. i checked and this job is running successfully every 10 minutes.
Please suggest what could be the possible reason and what can i do to solve this issue.
Thanks,
Sheetal SharmaHi,
First of all ask your IT (Exhchange) guy to check port number 25 is open or not for communincation, if not open ask him to open.
you can check this yourself by doing TELNET
steps to do telnet :
logon to your application server,
go to command prompt
and type TELNET <IP address of email server> 25
If it prompts some message like this
"exhange.domain.com Microsoft ESMTP MAIL Service, Version: 6.0.3790.18 30 ready at Mon, 16 Jun 2008 16:25:41 +0300. "
then it means your port 25 is open for communication.
Regards,
Abuzar. -
SMS Provider for sending SMS from SAP BI server
Hello,
I need to send sms from sap bi server.
Which service provider is preferable to use for sending sms?
Any suggestions?You can opt for IDEA...............
-
How to send SMS from SAP to Any mobile
Hi Friends,
I have a requrement. How to send SMS from SAP to Any mobile?? For Example: If i created PO in SAP then i want to send a SMS to Concerned Vendor and HOD.
Please provide the pre-requisites?
NaveenHi Naveen,
there is a standard webservice globally available called Send SMS and you can consume that webservice with the help of CAF and you can send PO number as SMS, If the standard webservice do not work then you have to create your own webservice to fulfill the functionality.
Regards
Manohar
Maybe you are looking for
-
Data written to socket getting lost? or perhaps out of order?
I'm trying to fix a bug in Flashmog. The bug is described in more detail here. Basically what is happening is that my Flash client claims that it is calling functions that don't arrive at the server -- or they arrive, but the socket data is out of or
-
Warum stürzt photoshop cc 2014 kurz nach dem starten ab? hatte vor dem update keine probleme
Hey, ich habe seid einigen Tagen, seit das Update PS CC 2014, das Problem das kurz nach dem öffnen von PS CC 2014 das Programm abstürzt. Weiß jemand was das sein kann?
-
DPMS and 2.6.37 kernel: backlight off forever
With the new kernel in the testing repo my Intel 945GM graphics chipset is affected by this kernel bug: https://bugzilla.kernel.org/show_bug.cgi?id=22672. When the screen goes in standby, there is no way to rewaken the backlight. I open this thread j
-
Segment E1ADRM4 in idoc SHPMNT05 only allows 10 partners
We have to post an extension of Idoc type SHPMNT05, with all the shipment and delivery information. For a concrete shipment, we have 15 different partners. However, segment E1ADRM4 doesn't allow more than 10 iterations. Why the system only allows to
-
Is there a way to transform multiple individual «symbol instances» into one «symbol set»?
I have an artboard filled with «symbol instances» which I'd like to transform into one single «symbol set», in order to use the «symbolism tools».