Sending internet E-Mail with LabVIEW?
Hi folks,
I'm stuck with a task that obviously wasn't foreseen when NI created the
internet toolkit for LabVIEW - I want to send E-Mail via SMTP, not only
inside our company's mail system but also to recipients with mail addresses
from other (internet) domains.
Our internet mail server (like most others, too) requires an
authentification before it allows to send mail, and since SMTP does not have
any authentification mechanisms it uses the poular "MAIL after POP"
proceeding, that is: You have to look after incoming mails first with POP
(post office protocoll), which is using a login name and password, and
afterwards your machine is allowed to send internet mail via SMTP (simple
mail transport protocoll) for several
minutes.
My problem is: The internet toolkit does not offer any POP functions at all,
so sending SMTP mail to a domain different from our own one does not work!
Does anyone know where to go from here? Has any helpful soul ever
implemented POP functions with LabVIEW?!?
Many thanx,
Hans-Jürgen Philippi
In info-labview group Jack Hamilton mentioned that he has done that and also
offered to share it, so you could email him for more assistance, his email
is [email protected]
Also if you are on MS machine, then you can use Outlook to send mail using
ActiveX, it will use your default mail account, where at least in my case I
have already specified SMTP username and password.
Also you could find SMTP spec and just use that since SMTP is a plain text
protocol then it should not be too hard.
Try telneting to some SMTP server, type hello and you will see that response
is plain text.
"Hans-Jürgen Philippi" wrote in message
news:8i7ni8$475lf$[email protected]..
> Hi folks,
>
> I'm stuck with a task that obviously wasn't foreseen when NI created the
>
internet toolkit for LabVIEW - I want to send E-Mail via SMTP, not only
> inside our company's mail system but also to recipients with mail
addresses
> from other (internet) domains.
>
> Our internet mail server (like most others, too) requires an
> authentification before it allows to send mail, and since SMTP does not
have
> any authentification mechanisms it uses the poular "MAIL after POP"
> proceeding, that is: You have to look after incoming mails first with POP
> (post office protocoll), which is using a login name and password, and
> afterwards your machine is allowed to send internet mail via SMTP (simple
> mail transport protocoll) for several minutes.
> My problem is: The internet toolkit does not offer any POP functions at
all,
> so sending SMTP mail to a domain different from our own one does not work!
>
> Does anyone know where to go from here? Has any helpful soul ever
> implemented POP functions with LabVIEW?!?
>
> Many thanx,
> Hans-Jürgen Philippi
>
>
-----= Poste
d via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----
Similar Messages
-
Can I send an E-Mail with photo (not as an attachment)?
I would like to send an E-Mail with a small photo (not as an attachment) to someone who is reluctant to open attachments. Can I do this and how??
Thank you
tchIf you insert an image into the body, it will still be 'attached', even though it won't be listed as an attachment in the usual way. Another option is to upload the photo to your personal storage space such as OneDrive or Google Drive, and then email the link to the image. The image can then be displayed in a web browser. If you don't have a storage space, there are plenty of free image-hosting services.
-
How can I set the language when sending an e-mail with attachment - 'Html'?
"Character Broken"
I made an ALV program, and this convert to "HTML', and send an e-mail with this.
Used Process is:
DATA: gt_abaplist LIKE TABLE OF abaplist,
gt_html LIKE TABLE OF w3html,
doc_chng LIKE sodocchgi1,
objpack LIKE TABLE OF sopcklsti1 WITH HEADER LINE,
objhead LIKE TABLE OF solisti1 WITH HEADER LINE,
mail LIKE TABLE OF solisti1 WITH HEADER LINE,
reclist LIKE TABLE OF somlreci1 WITH HEADER LINE,
lv_line TYPE i.
DELETE FROM MEMORY ID '%_LIST'.
SUBMIT z_template
AND RETURN EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = gt_abaplist
EXCEPTIONS
not_found = 1
OTHERS = 2.
CALL FUNCTION 'WWW_HTML_FROM_LISTOBJECT'
TABLES
html = gt_html
listobject = gt_abaplist.
doc_chng-obj_name = 'URGENT'.
doc_chng-sensitivty = 'O'.
doc_chng-obj_descr = ' '.
doc_chng-obj_langu = '3'.
objhead-line = ' '.
APPEND objhead.
mail[] = gt_html[].
DESCRIBE TABLE mail LINES lv_line.
CLEAR: objpack.
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = lv_line.
objpack-doc_type = 'htm'.
objpack-obj_descr = ' '.
objpack-doc_size = lv_line * 255.
objpack-obj_langu = '3'.
APPEND objpack.
CLEAR: reclist.
reclist-receiver = 'e-mail address'.
reclist-rec_type = 'U'.
APPEND reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = objpack
object_header = objhead
contents_bin = mail
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
SUBMIT rsconn01 AND RETURN.
I want to show this by "Japanese".
But the character is broken.
LIke This:
u01D1u072C u0205| u0205u072C u0508 QC u04B90m
How can I set the language? How can I solve "Charancter Broken" ?
Plesse, let me know.
Thank you so much.
Edited by: Jaime White 999 on Nov 21, 2011 8:45 AM
Edited by: Jaime White 999 on Nov 21, 2011 8:46 AMHi Jaime,
Are you saying, you are getting junk characters in the email attachment? Then pls check the following. Since you want to send Japanese fonts, please pass language 'J' in both objpack-obj_langu = '3' & doc_chng-obj_langu = '3' instead of '3' please replace it with 'J'.
Another thing which you may have to check is the SCOT device type. As I understand from my basis colleague, this may also affect your attachment fonts since the emails are sent through SCOT. Go to transaction SCOT-> Settings-> Device types for format conversion. Check whether wrong device type is defined for Japanese there. Hope this helps
Regards,
Gokul -
When I send an e-mail with a pdf attachment, my boss says she did not receive it. My SENT folder indicates that the e-mail and attachments were sent. I have not received an error message and I have checked the e-mail address 6 times. My bosses' e-mail address is in my contacts.
No one else is complaining about this.search google for "iphone remove picture from contact"
-
When trying to send an e-mail with small attachment, I get the error message qq#4.3.0 and the message fails.
Pop or IMAP mail account?
What version of Thunderbird?
First try this just in case this a Sent folder issue. Right click on 'Sent' Folder and choose 'Properties' then click on 'Repair Folder', click on OK.
Close and reopen Thunderbird.
This will make sure the indexing is correct.
Try Archiving emails in the Sent folder (Ctrl+A will highlight all Sent emails and display them as conversation - click on 'Archive ' button) and then right click on Sent folder and choose Compact.
This will get all the old emails into an Archive folder and compact will remove any traces of old deleted sent mail, thus freeing up space.
It could also be an issue at the server end. -
Send an e-mail with an attachment
Hi all,
The requirement is to send an e-mail with an attachment containing sales cycle information. The mail-ids will be got from the distribution list mentioned on the selection screen.
I have to add a select-option with no intervals so that it can accept the distribution list. I also have to check the distribution list for its validity.
How do I go about it?
Please help.
Thanks and regards,
AnishurREPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_sender LIKE somlreci1-receiver
DEFAULT '[email protected]',
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM. -
Sample Java Code to send an HTML mail with embeded image
Hello,
Please can I get a sample Java code on sending an HTML mail with embeded image.
The HTML message and relevant input parameters withhbe supplied from a PL/SQL that will call the class , the class will embed the image and send the mail to the recepient.tev wrote:
Please can I get a sample Java codeNo. This is a forum, not a code mill.
Recommended reading: How to ask questions the smart way
db -
I cannot send messgaes through Mail with my iCloud account. Whenever I try sending them, it tells me "Unable to sign message".
Does anybody know how to fix it?Check if you have set the correct language and country in your Apple TV. Maybe you are trying to connect to the wrong iTunes store.
-
Sending an E-mail with attachment with PHP from Flex
Hey,
I've made a custom compontent wich mails your own drawings to you. But I have a problem to send an e-mail with attachment.
I use the HttpService to send the data to the php-file, but I always get the Fault message (form phpFault()).
This is my code in Flex:
<mx:Script>
<![CDATA[
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
import mx.graphics.codec.PNGEncoder;
import mx.events.ValidationResultEvent;
import mx.controls.Alert;
[Bindable]
private var byteArray:ByteArray;
private function mailImage(comp:DisplayObject):void
var emailValidation:ValidationResultEvent = validEmail.validate();
if(emailValidation.type == ValidationResultEvent.INVALID)
Alert.show("Invalid E-mail");
else
var bitmapData:BitmapData = new BitmapData(comp.width, comp.height);
bitmapData.draw(comp);
var png:PNGEncoder = new PNGEncoder();
byteArray = png.encode(bitmapData);
httpMail.send();
private function phpResult(evt:ResultEvent):void
Alert.show("You've got mail.");
private function phpFault(evt:FaultEvent):void
Alert.show("Something went wrong. /n" + evt.message.toString());
]]>
</mx:Script>
<mx:EmailValidator id="validEmail" source="{ipEmail}" property="text"/>
<mx:HTTPService id="httpMail" url="php/byte-receiver.php" method="POST" result="phpResult(event)" fault="phpFault(event)">
<mx:request>
<img>{byteArray}</img>
<mail>{ipEmail.text}</mail>
</mx:request>
</mx:HTTPService>
<mx:Label text="draw your own image" styleName="h1" x="10" y="0" width="493" height="60"/>
<mx:Canvas
id="drawCanvas"
x="10" y="77"
width="561" height="245"
borderStyle="solid" borderColor="#A6A6A6">
</mx:Canvas>
<mx:Label x="10" y="329" text="Your e-mail:" styleName="text"/>
<mx:TextInput
id="ipEmail"
x="86" y="324" width="417"/>
<mx:Label
id="lblMailImage"
x="10" y="383"
text="Mail my image"
click="mailImage(drawCanvas)"
mouseOver="lblMailImage.setStyle('color', '#00067b')"
mouseOut="lblMailImage.setStyle('color', '#717171')"
styleName="button"/>
</mx:Canvas>
This is my PHP code
<?php
$fileatt_type = "application/octet-stream"; // File Type
$fileatt_name = "ImgContact.png"; // Filename that will be used for the file as the attachment
$email_from = "[email protected]"; //Who the email is from
$email_subject = "Contact Winckelmans.net"; // The Subject of the email
$email_message = "Mail send by winckelmans.net. Your drawing is in the attachment"; // Message that the email has in it
$email_to = $_POST['mail']; // Who the email is too
$headers = "From: $email_from";
$data= $_POST['img'];
$semi_rand = md5(time());
$mime_boundary = "==Multipart_Boundary_x{$semi_rand}x";
$headers .= "\nMIME-Version: 1.0\n" .
"Content-Type: multipart/mixed;\n" .
" boundary=\"{$mime_boundary}\"";
$email_message = "This is a multi-part message in MIME format.\n\n" .
"--{$mime_boundary}\n" .
"Content-Type:text/html; charset=\"iso-8859-1\"\n" .
"Content-Transfer-Encoding: 7bit\n\n" .
$email_message . "\n\n";
$email_message .= "--{$mime_boundary}\n" .
"Content-Type: {$fileatt_type};\n" .
" name=\"{$fileatt_name}\"\n" .
//"Content-Disposition: attachment;\n" .
//" filename=\"{$fileatt_name}\"\n" .
"Content-Transfer-Encoding: base64\n\n" .
$data . "\n\n" .
"--{$mime_boundary}--\n";
$mailsend = mail($email_to, $email_subject, $email_message, $headers);
echo $mailsend;
?>
This is the error I get in an Alert:
(mx.messaging.messages::ErrorMessage)#0
body = ""
clientId = "DirectHTTPChannel0"
correlationId = "F3C16CE1-65CF-E690-1907-D28293FD6BB9"
destination = ""
extendedData = (null)
faultCode = "Server.Error.Request"
faultDetail = "Error: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2032: Stream Error. URL: php/byte-receiver.php"]. URL: php/byte-receiver.php"
faultString = "HTTP request error"
headers = (Object)#1
DSStatusCode = 0
messageId = "7A1DCDBE-0358-7E39-3AF8-D282945A7748"
rootCause = (flash.events::IOErrorEvent)#2
bubbles = false
cancelable = false
currentTarget = (flash.net::URLLoader)#3
bytesLoaded = 0
bytesTotal = 0
data = ""
dataFormat = "text"
eventPhase = 2
target = (flash.net::URLLoader)#3
text = "Error #2032: Stream Error. URL: php/byte-receiver.php"
type = "ioError"
timestamp = 0
timeToLive = 0
Thanks in advance
VincentHi
I'm having the same issue, except my application actually sends the email but the attachment is 0 octet and it doesn't even give me an error... Any chance you found a solution for this and could share it ?
Thanks -
Send an e-mail with attachment 10g
Hello guys,
I have a form with a single button and I want to send an e-mail with a file attachment by pressing that button. I managed to send the e-mail without the attachment using utl_smtp. I am using forms 10g and I know there is also utl_mail but could not find any code.
Can anyone send me a code example that sends an e-mail with a file attachment ?
Thank youCheck out this link. It has a sample form which shows how to send the email using SMTP and UTL MAIL.
http://www.alexyscorp.com/products.htm
It has also a sample on how to send to report as an attachment.
Let me see if I get time I will modify it to send an attachment.
Rajesh -
Am trying to send an e mail with an attachment from i works. I can't find the document I wrote. Where is it?
emmazell33 wrote:
Am trying to send an e mail with an attachment from i works. I can't find the document I wrote. Where is it?
Wherever you saved it. Likely, Documents folder. -
When I send an e-mail with text it comes out gobble de gook the other end
when I send an e-mail with text it comes out the other end gobble de gook and the recipient cannot under stand what I am saying it does not happen with anyone else only Mozilla Firefox
== This happened ==
Every time Firefox opened
== past two years since I got vistaHi aandjmibert;
Hope you are doing well and sorry to hear that you are having this issue.
Let’s make sure that we collect the most possible information may be relevant to your issue. Please bear in mind the more information that you provide to us the better picture we will have about the factor or factor that are contributing to your situation.
Please provide to us as most of the following information as possible to you.
~ OS Operating system i.e. Apple, Win, Linux. Let’s us know if the operating system is updating automatically or not. If you are able please let us know the build.
~ Complete printer model i.e HP Photostat c310a.
~ Please include any other information that you feel may be relevant.
I reintegrate the fact that the more information you include, the better the chances of all members of the community to gather a complete picture of your situation and this will increase the probabilities being able to help you in a promptly and more effective matter.
Thanks
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance! -
Everytime I send a message from my yahoo account (which is also my appleID account) a small icon picture (which is a pic of my ex-boyfriend) is attached to the e-mail heading. I'm able to notice I want to remove this from happening. The picture is displayed on my iphone when I open up the mail.
Steps I take:
1. I write an e-mail message from my yahoo account to my other .edu account on a desktop computer.
2. I send the e-mail message from my yahoo account to my other .edu account on a desktop computer.
3. When I open up my .edu account on my iPHONE, there is a new message from my yahoo account.
4. Upon opening the e-mail message on my iPHONE, in the title heading it has the title of the email along with a small (upper right) picture on the iPHONE.
Another thing that I tested was the same thing on my iPAD for text messages:
1. I set up my text messages to my yahoo account (which is also my apple ID account)
2. I send a text message to a person and the same small icon picture is shown on the ipad with each message that is sent
3. The person receiving the text message does not get the small icon picture; however, on the ipad it shows this picture (WHICH NEEDS TO BE REMOVED)
I need to determine how this icon picture is associated with both my yahoo and apple ID account. The funny thing is that I don't have this picture on any of my devices (mac, iphone, ipad). It has been completely removed from all of my technology sources. I'm thinking it has to be something to do with the origniation of my apple ID.
PLEASE HELP ME....this picture is hurting my professionalism when I send outgoing messages.
Thanks.search google for "iphone remove picture from contact"
-
Something happened to my laptop. I try to resend e-mails with files and just sends the email with the file name, does not send the file. what can I do to fix this??? thanks
In Mail, go to:
Edit > Attachments
and check "Include original attachments in reply" in Mail's menu. -
Hi.
Can you tell me if it's possible having two types of sending messages from SD orders, by e-mail: sending a PDF sometimes and other times sending an e-mail just with texts (no attaches)?Hi,
It depends on how you configure your output confirmations. LIke email output for document confirmation would go automatically but if you also want PDF need to make use of medium " special function 8 ".
Hope it clears.
Thanks & Regards
Sadhu Kishore
Maybe you are looking for
-
Error while creating a Planned Order
Hi SAP Experts, I have an error encountered while creating a Planned Order which is "Mode linkage problem with mode number". Diagnosis: An application program called an LCA routine and the following error occurred: An order has at least one c
-
I just purchased a second hand iPad in carboot.i didn't realised that the old accnt is still linked to the device,now I icant activate my account .I don't know where and how to contact the original owner.what should I do activate my accnt?is there a
-
Octroi calculation on Excise Duty
Hi, I have following requirement for Pricing procedure. Octroi should be calculated on Basic + Excise Duty. Not able to identify how the Excise duty (Which is a part of TAx Procedure) will be included in pricing procedure. My pricing calculation is B
-
IOS-XRv and HSRP: Supported?
Hey gang - I'm building a virtual lab within a KVM hypervisor, and it includes 2 XRv images tied together across a VM switch image (Arista vEOS, but that's unimportant). The L2 connectivity is clearly there between the two routers: RP/0/0/CPU0:r2#sh
-
Working on pages in 1 Library, but for several projects (different targets)
Hi guys, I'm a designer in a developer-team, actually we give Flex, FlashBuilder and FlashCatalyst a big try. Goal: to make one application / service, with same Webservices and components, for different mobile devices, as AIR-Application and for prob