Sending mail don't reach my sent mail folder...am i doing something wrong?....

when i send a new e mail, it does not reach my sent folder..am i doing something wrong.....

Firefox doesn't do email, it's a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39]

Similar Messages

DVD's don't always play...am I doing something wrong?

Hey, sorry if this has been posted several times before...I have dvds that play fine on higher end dvd players, but won't on "off" brand players...I'm using FCP4 and DVDStudio Pro3. I use compressor from FC and export as mpeg 2 with a 2hour setting. I then imput the compressor Audio/video files into DVD SP, build and format the dvd. I don't have any problems playing on a good player, but my clients complain that they have problems on an off brand player...is this to be expected on these consumer created dvds, or am I doing something wrong? Thankyou for your input

ok, i'm looking at compressor and don't see the audio format that has been talked about to use. The one that has been used is under the MPEG-2 120 Min high quality encode. The following is a copy and paste of the summary for each preset.
Video Preset:
Name: MPEG-2 120min High Quality Encode
Description: 3.5Mbps,2-Pass VBR,4:3
File Extension: m2v
Video Encoder
Format: M2V
Width and Height: Automatic
Pixel aspect ratio: default
Crop: None
Frame rate: (100% of source)
Aspect ratio: 4:3
Field dominance: Auto detect
Average data rate: 3.5 (Mbps)
2 Pass VBR enabled
Maximum data rate: 7.5 (Mbps)
High quality
Best motion estimation
Closed GOP Size: 1/2 second, Structure: IBBP
DVD Studio Pro meta-data enabled
Audio Preset:
Name: DVD PCM Audio
Description: AIFF 48Khz,16bit,Stereo
File Extension: aiff
Audio Encoder
Format: QT
Sample Rate: 48.000kHz
Channels: 2
Bits Per Sample: 16
Codec Type: Uncompressed
I looked under the different compression settings and it says the encoder is AIFF, but under the settings for it, it doesn't list AC3. My Compressor version is 1.2.1
Also, how does all the settings look for the video...see any prolems that would explain the low end players messing up?
Thanks again for the help...its appreciated!

I cannot send mail rejected by server does not allaow relaying

Im having trouble sending mail. The server doesnt allow relaying

If you are having trouble sending mail and all of the following are working properly:
Data connection
Wi-Fi connection
Cellular service
Then the issue probably lies with you SMTP server, even though these steps can be redundant i would try the Following:
1. Try toggling airplane mode on for 30 seconds, then turn it off-Test mail
2. Restard the phone-Test mail
3.If using wi-fi connection disconnect/reconnect(if it still doesnt work) try forget all network settings, then reconnect to the network once again.
4.If none of those work, depending on who you e-mail service provider is, it may be an issue with their servers and i would contact them to check.

"Cannot Send Mail" App has the smtp address wrong.

After upgrading my 3GS Iphone to OS 5.0.1, I have been an error msg when trying to send mail:
"Cannot Send Mail" - No password provided for [email protected]
The account is setup properly in settings as "SMTP.Comcast.net"
I have deleted the account and set it up again several times. No luck!
Does anyone else see this error?
Any help?

Go into Settings>Mail, Contacts, Calendars>your account>Outgoing mail Server SMTP>Primary Server then turn Server ON and fill in both User Name +Password under Outgoing Mail Server.

Visual alert that mail app is actually doing something!

When I press 'Get mail' I see no visual confirmation that Mail is actually doing something such as the spinning connect wheel beside each account as the app checks that account in earlier versions of Mail up to Snow Leopard.

Thanks Eric, now I know, seems like I now have no option but to move to Postbox when I would have preferred to stick with mail for syncing. I have come from a MBP running Snow Leopard so I have no experiance with OS after that until this.
The problem is I have not had any connection to the internet a couple of times and pressed 'Get mail' but Mail has not reported anything or any error, makes me not trust the application, already it makes my think that there are problems and Apple covers them up by just not informing you to it checking accounts etc. True or not I have difficulty understanding why this would not be part of a normal working application, it has been the objective of software developers to inform users of everything that is helpful for them, even Apple has notification this notification that but most intuitive interaction with the user in Mail has been removed.... seems odd. I am getting more and more dissapointed with Apple apps.

Send mail in the portal does not work

Hi guys
I have a portal installation, where notification mails are not sent,
and I can't find the reason. If I try to send a mail via the "Send email"
on a users business card, I get the error: "The mail could not be
sent to the specified recipients".
I have created an email transport (JavaMailTransport), where I refer
to the preconfigured Exchange system (found in System Administration
System Configuration > Portal Content > Content Provided by SAP >
Collaboration > Exchange) and "localhost" as SMTP server. Then on the Internet
Information Server, we have set up a virtual smtp server.
From the trace file, I get:
#1.5#000BCD2368F4000C0000009700001C14000406ED5D959894#1133516454135#
com.sap.ip.collaboration.gw.impl.transport.javamail.exception.MailSendException#
sap.com/irj#com.sap.ip.collaboration.
gw.impl.transport.javamail.exception.MailSendException.logException(268)#r5mas#244318#####SAPEngine_Application_Thread[impl:3]_4##0#0#Error##Plain###
com.sap.ip.collaboration.
gw.impl.transport.javamail.exception.MailSendException: The mail could
not be sent to the specified recipients
We are running SPS14.
Any help will be rewarded.
Best regards,
Martin
Message was edited by: Martin Søgaard
Message was edited by: Martin Søgaard
Message was edited by: Martin Søgaard

Hi Martin,
please check all details and links given in Error: when trying "send To" in KM folder.
If nothing helps, additionally check if you can get some more exception information from the log viewer (stack trace). As Andreas suggested, if nothing helps or brings up a new idea, open an OSS message. In this case, please come back with the results.
Hope it helps
Detlev

No messages in send mail folder on E7?

When I create email on my E7 and send it I can not find the message any more.
It is not in send items and not in send Items of the linked email account.
Where can the send messages be found?
(I use a pop 3 mail account)
Best regards,
Ivo

Check the settings on the email account on the phone, open email, select options>settings> and make sure number of mails kept in folders is set to an adequate number (I have it set to 50 on Hotmail, and works fine !)
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Sended Mail Folder empty on C7

Hi,
sending and receiving mails from nokia messaging works quite well, but after sending a mail it disappears from the outbox. That's correct but it should be moved to the "sended folder". This folder is completly empty.
What can i do?
thx for help

No help....but I get this as well
Nokia C7-00

How can I get Thunderbird to search the Junk Mail folder as it does any other folder?

Just noticed that Thunderbird's global search seems to omit the Junk folder. I assume this must be a problem with my configuration. Junk filters are not perfect and inevitably some "good" email ends up in the Junk folder at least temporarily. Therefore if I am searching all my email for something, I need that search to include the Junk folder. But I can't find the setting that would make this possible. Help, anyone?

I appreciate the 108 "views," but there weren't any replies, so I took another shot at figuring it out. I did a CMD-I on the Shared folder, and made the "everyone" group have read-write access, and it worked! I'm not sure if its because now all groups have read-write access, or just because the "everyone" group does, but I don't care at this point. I'll have to restrict a few folders within in there, but at least it searches the main Shared folder itself now.

My laptop continues to close down Safari unexpectedly. It is relatively new {MacBook Air purchased June 2014} and I don't think this should be happening. Is there something wrong? How do I fix this?

How can this be fixed if it can be fixed? No bugs or viruses are on the computer as far as I know. All other applications work perfectly on the laptop, so it is strange that the Safari continues to closedown. I can use Safari and it does work for the majority of time, but there are times when the Safari closes out.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

TS4062 i have 16 songs that did not download to my iphone, don't know what the problem is--have several songs that did download, am i doing something wrong?

i have 16 songs that won't download to my iphone. i have several songs that did go thru. Am i doing something wrong.

tis true
I know, I always do that but I was in a rush to get somewhere and I was relying on my thousand dollar Mac to do some kind of recovery or something. I know Microsoft always keeps temporary files (I think Mac does too, part of me asking here in this forum was for someone to tell me where I can find those files) and when you go to open Office Works then it gives you the option of opening the last recent documents, saved or not saved.
I usually copy paste into my emial just in case something goes wrong with the created document but I just didn't have the time to login and do all that My loss, you live and you learn, BUT still if ANYONE got any info on this, PLEASE DO CHIME IN *keeping the hope alive*

Sending mail with authentication

Dear All,
I am trying to send mail with authentication. My Mail server requires username and password while sending mails from Netscape.
But when I am sending mail through java mail api, I can send email with wrong username and password.
Actually when I enable debug, I am getting the following prints.
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG: SMTPTransport trying to connect to host "vkarthik.net.com", port 25
DEBUG SMTP RCVD: 220 vkarthik.net.com ESMTP Sendmail 8.12.5/8.12.5; Thu, 8 Jan 2004 21:04:59 +0530
DEBUG SMTP SENT: helo saravanakumar.net.com
DEBUG SMTP RCVD: 250 vkarthik.net.com Hello saravanakumar [192.168.4.50], pleased to meet you
DEBUG: SMTPTransport connected to host "vkarthik.net.com", port: 25
DEBUG SMTP SENT: NOOP
DEBUG SMTP RCVD: 250 2.0.0 OK
DEBUG SMTP SENT: mail from: <[email protected]>
DEBUG SMTP RCVD: 250 2.1.0 <[email protected]>... Sender ok
DEBUG SMTP SENT: rcpt to: <vkarthik>
DEBUG SMTP RCVD: 250 2.1.5 <vkarthik>... Recipient ok
Verified Addresses
vkarthik
DEBUG SMTP SENT: data
DEBUG SMTP RCVD: 354 Enter mail, end with "." on a line by itself
DEBUG SMTP SENT:
DEBUG SMTP RCVD: 250 2.0.0 i08FYxbY017757 Message accepted for delivery
I set mail.smtp.auth as true correctly.
When I browse through this forum I found that authentication is performed If we get debug prints as follows.
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth true
DEBUG: SMTPTransport trying to connect to host "smtp.mail.yahoo.com", port 25
DEBUG SMTP RCVD: 220 smtp011.mail.yahoo.com ESMTP
DEBUG: SMTPTransport connected to host "smtp.mail.yahoo.com", port: 25
DEBUG SMTP SENT: EHLO wva24-d9kzst01
DEBUG SMTP RCVD: 250-smtp011.mail.yahoo.com
250-AUTH=LOGIN PLAIN
250-PIPELINING
250 8BITMIME
DEBUG SMTP Found extension "AUTH=LOGIN", arg "PLAIN"
DEBUG SMTP Found extension "PIPELINING", arg ""
DEBUG SMTP Found extension "8BITMIME", arg ""
DEBUG SMTP: Attempt to authenticate
DEBUG SMTP use AUTH=LOGIN hack
DEBUG SMTP SENT: AUTH LOGIN
DEBUG SMTP RCVD: 334 VXNlcm5hbWU6
I guess the following statement is missing in my case.
DEBUG SMTP: useEhlo true, useAuth true
Could You please let me know why I am not getting this? Am I doing something wrong in my code?
Or it is a problem in the mail server?
Thanking you,
Saravanakumar

Hi Sravankumar,
Can you please let me know the Version of the JDK which you used earlier, which had those old mail.jar & activation.jar files through which you were able to send mails without SMTP authentication.
Another thing which I wanted to know from you is that were the mails reaching the destination. I want to make sure about this since,even though SMTP Authentication at the client side is disabled, if the SMTP Mail Server does not accept invalid Email IDs as userIDs, then I guess we will not be able to send mails. Please clarify on this.
My requirement is that I want to send mails without a valid User Login through that SMTP Mail Server.
If possible also please send across the piece of code which does the same
Regards,
Madhukar KR

Mail and sent items folder on Yahoo!

(Firstly I'm running the latest version of Mail on the latest OSX on an iMac, and MBA, iPads and iPhones).
What is it with Mail on oSX and how have Apple managed to make it so much worse than Mail on iOS?!!!!!
First issues, if you can help please.
I use Yahoo! On every Mail app in the world for the last zillion years (including on iOS) when you sent an email it goes in to your Sent Items. Nothing revolutionary about that. But why on Mail for OSX does it go in to a different folder called Sent Messages and not in the Sent Items folder like it does on every other Apple Mail app?! If I sent an email on my iMac when I want to find it on my iPhone I won't find it in Sent Items (one of the four or so default folders with a pretty icon) but instead I have to find it all on it's own in a separate sub folder called Sent Messages. Can that really be right?
Secondly, Exchange.
Mail on iOS and Exchange all works simply and logically and updates immediately etc. Why does Exchange mail on Mail for OSX firstly take many, many, many, minutes to update the Inbox (despite manually clicking the Get Mail icon). it is soooooo slow despite forcing it to do it. Also, identicasl settings for Mail Preferences on my MBA and my iMac. One Exchange Inbox says 189 Unread and the other says 98 Unread.
Mail for OSX gets a resounding 2/10 score but maybe I'm doing something wrong?
All input gratefully received.

FROM AN APPLE TECH - SEE BELOW
Hi Scott
To see Sent Mail on you Gmail IMAP address in Apple Mail program, you need to click on and expose Gmail section in left column of mail and show the Sent folder as shown below. This will show you the emails sent from your other devices. This information is stored on Gmail server.
The best way to reach me is via email. Please reply to this email and I will contact you as soon as I possibly can.
Thanks
Scott
[email protected]
Apple

Sending Mail with an Attachment

Hi
I'm trying to send mail with a PDF attached. I've been set up on exchange server 2007... Sending mail without an attachment works fine.
Was wondering if anyone knows if this is a known issue or if I'm simply doing something wrong. The attachment has sent fine using Outlook web access... So it's not a problem with our connection.
Cheers
Lucy

Ditto to the comments on configuring EWS to deal with larger attachments. The instructions to do this are, unfortunately, very confusing as some configuration items are in MB and some are in KB and some are in bytes!
I worked with our sys admins to get this running, I knew things were better when I could send large attachments with Entourage Web Services Edition. I am still having occasional problems with large attachments not being sendable with Mail.app. I am hoping that 10.6.1 might tweak something to fix this?
The link we used for information is here:
http://ministry-it.blogspot.com/2009/08/entourage-ews-attachment-limits.html
While you are at it, you may want to have them check attachment limits for Outlook Web Access (OWA) if you find yourself using that and get bitten by the same 5 MB limit issue. Note that OWA and EWS have separate settings and are changed in different ways!
http://technet.microsoft.com/en-us/library/aa996835.aspx
Good luck
-- Alex

Sending mail smtp vs exchange without outlook mailbox opened

We have an application published via Citrix Xenapp 6.5 on win2k8r2 servers which uses server-side Outlook for composing/sending mail. The user does a one time setup of the Outlook profile through a Citrix published Outlook.exe. After the setup
their Outlook profile is then retained in their Citrix/roaming profile and Citrix published Outlook.exe is no longer opened directly. When the user clicks an 'email' button in the application, an Outlook send/compose window from the server appears with
the contents attached and ready to be mailed. Up until now employees were using Exchange mailboxes and this functioned perfectly. Hit 'send' on that compose window and the message would get sent. We are now migrating most mailboxes
to IMAP and have found that in order for the Citrix Outlook instance to be able to send its mail via SMTP, a server-side session of the Outlook.exe mailbox has to actually be opened and not just the compose window otherwise the messages appear to send but
are actually just sitting in the outbox. No errors. Once Outlook mailbox is opened, the messages get sent out. We dont want users to have to open up a separate Citrix Outlook instance as this creates confusion with their usual client-side
Outlook and it's unwanted for limited resources in Citrix sessions to go towards sync'ing mailboxes. Seeing the same behavior with Outlook 2007 sp1 and Outlook 2013 sp1 x86. Why would this work with Exchange but not SMTP and can anyone suggest
workarounds?
I'm not knowledgeable with vbs/vba but i was considering whether it's possible to launch outlook hidden from the user or to script initiation of send/recv session on the mailbox at scheduled intervals without outlook open, thinking that might send what's
in the outbox. these are some areas i've looked into but havent gotten results yet -
Email remains in the Outbox when the StrictAccountOrder registry value is non-zero
The mysterious Outlook Outbox
Launch Outlook Hidden
Force outlook to "Send/Receive All" using VBA
http://discussions.citrix.com/topic/332666-need-workaround-for-running-an-old-application-as-a-published-app/
Thanks

When you use a SMTP server, you need Outlook open to send mail - the spooler has to have time to load and send the message. When you use Exchange, outlook hands the message off to exchange and exchange sends it.
It's not possible to launch outlook hidden using a different profile - you can only use one profile at a time. There is a utility called ExtraOutlook that can open two profiles that might work for you - most people say it works, but AFAIK, it won't open
the second profile in a hidden state.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter

Sending mail don't reach my sent mail folder...am i doing something wrong?....

Similar Messages

Maybe you are looking for