Sending mail EFG_GEN_SEND_EMAIL ..error in SMTP

Hi Friends,
I am using the FM EFG_GEN_SEND_EMAIL , for sending emails...
But after sending mail... i found it not delivered...
I have checked in trx:SCOT...found that in SMTP the messages are in Error state....
I don't know, how to see that errors...
Please help me...to solve this problem...
I did the route test in SMTP ...it is successful..

Hi,
As you are receiving the dalivery failure, the message should be going from SAP.
Please check the recipient ID. Hope you have given the domain as your mail server domain itself.
Then test it through the short message service. like,
go to System->Short Message->try a short massage give email id in recipients, specify type as Internet Address and see...
Regards,
Renjith Michael.

Similar Messages

Can't send mail, get message: the smtp server rejected the password. I tried lock and unlock keychain. I tried unlock captcha. Gmail works okay, it is Mail that does not. Help!! :(

Can't send mail, get message: the smtp server rejected the password. I tried lock and unlock keychain. I tried unlock captcha. Gmail works okay, it is Mail that does not. Help!!

Hi
You need to check with your ISP whether or not the send mail server (SMTP) requires a password. Some do, but many do not. When you know the correct password to send mail, then you need to tell Mail as follows:
Mail menu > Preferences > Accounts > Select the account
Click on the Outgoing Mail Server (SMTP) combo box, and select Edit SMTP Server List...
In the Account Information tab put the server name
In the Advanced Tab, set up the authentication information from your ISP.
Good luck
Bob

I try to send emails after I have recieved. They are hotmail accounts. message says"cannot send mail and error occurred delivering this message. I have tried deleting and restarting. I have tried shutting phone down completely and restarting. no help...

I am trying to send emails via a hotmail account on my i phone 5 and get the following message despite recieving e mails. "cannot send mail an error occurred delivering this message"... i have tried to restart phone to no avail. I have tried to delete and re input account to no avail. I need help

Hello lclaunch22
You may need to validate the account with Hotmail. When logged in to the Hotmail account on a computer, there are instructions on how to do this.
iOS: Setting up Hotmail, Outlook, Live, or MSN email accounts
http://support.apple.com/kb/ht1694
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Ipad 2 suddenly decided it couldn't send mail on mobile me smtp server any known fixes

Ipad 2 suddenly decided it couldn't send mail on mobile me smtp server any known fixes?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try a Reset - iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
Or this - Delete the account in Mail and then set it up again.
 Cheers, Tom

Sending Mail- Messages Errors

My mail was working fine and then suddenly I get error messages saying "The message could not be delivered and will remain in your outbox until it can be delivered. The server "smtp.mac.com" refused to allow a connection on port 25."
The message never gets delivered and sits in my outbox! What can i do? I have mail version 2.1 . Maybe I downloaded a new version of mail? I have no idea.
Can you help?
Lee

Your ISP may have started blocking port 25 as an anti-spam measure. You will need to change the port you using to send mail. Try port 2626 or 587 instead.
To change the port in Mail:
Mail > System Preferences > Accounts > (choose the email account you need to change the port on) > Advanced
The port setting is at the bottom of the Advanced tab window.

Cannot send mail & Connection error after 2.0

Hey guys,
I'm running 2.0 on an 8GB 2G iPhone. After updating to 2.0 in the mail app im getting two errors. The first one is "Connection to outgoing server "smtp.comcast.net" failed" and the second (when I'm trying to send mail) is "Cannot send mail. The sender address was invalid".
For the first error, I remember this being a problem when I first got the phone in January, but I cannot for the life of me remember what I changed in the settings so that it would work.
The second error is new with 2.0.
Any info or suggestions are greatly appreciated
Cheers

I am having the exact same problem. Can't send any emails. Get the message "Can't send mail. Recipient address invalid" or something like that. I have reviewed all the troubleshooting information. This did not happen until I upgraded to 2.0. I am using Edge with a pop account on an original iphone. Any help would be appreciated!!

Sending Mail to a Comcast SMTP server

Have a MAC PRO and MacBook Pro on the same network both running OS 10.8.2 with two identical email accounts having identical settings. MAC PRO email accounts work as expected; able to send and receive emails. However on the MacBook PRO, unable to send emails from either account, only receive emails. I have the same email problem when using the MacBook PRO on different networks, like a Hotel.
Consistently get an error message stating “the sender address [email protected] was rejected by the server smtp.comcast.net.”
Tried deleting the accounts, restarting and entering new accounts; reinstalled OS 10.8.2; but no difference in the problem.
Worked with several layers of Comcast support, trying all sorts of Port and SSL settings, and confirmed my password works on Comcast webmail, but cannot determine why I cannot send email from one Apple computer when the other Apple computer works as expected. All they could do is blame Apple.
What is different about the MAC PRO (early 1998) and the MAC PRO (15-inch Late 2011}?

What was the SMTP error?
Comcast has messed up their outgoing server somehow. I got a message about "The sender address [email protected]" was rejected by the server smtp.comcast.net." This of course is absurd, since YOUR E-mail address has nothing to do with sending mail.
If that's the problem, you're going to have to call Comcast and repeatedly escalate the case until you can find someone with even a basic understanding of how E-mail works. I had to get a "supervisor" involved, and this person was still so ignorant that she had to call me back the next day after "researching" the problem and still proposing asinine attempts to resolve it. And it never did get fixed, by the time I left the location at which I needed to use Comcast.
You need to insist that your reply-to address is irrelevant for sending E-mail. If you're connected directly to Comcast's network (which you are when you're connected through your cable modem), you should be able to send through their SMTP server. Period. That's how Time-Warner and Verizon work, for example. The first thing you're going to hear is "Well, you're not using your Comcast E-mail account." IRRELEVANT. And why would anyone use the obscure Comcast-assigned E-mail address in 2013?
Good luck.

BLS Send Mail Action Block Requires SMTP Mail Server Mail Account

My SMTP Mail Server does NOT require authentication. It appears as if MII Ver 12 requires a mail account to be filled in on the BLS Send Mail Action Block. If the mail account field is left empty the transaction fails (error - mail account cannot be blank). Transaction works without the mail account on Ver 11.5 but Ver 12 requires the field to filled in. Please advise whether this is a new requirement in Ver 12 or a bug that needs to be addressed.

Hi Sam,
What I think is, it requires one mail account to send the mail and one to receive it.
There is no restriction on receiver that can be anyone. But the sender needs to be known that some mail has been sent from his mail account. So may be because of this the added authentification is required. It will use that mail account to send the mails.

"Cannot Send Mail" App has the smtp address wrong.

After upgrading my 3GS Iphone to OS 5.0.1, I have been an error msg when trying to send mail:
"Cannot Send Mail" - No password provided for [email protected]
The account is setup properly in settings as "SMTP.Comcast.net"
I have deleted the account and set it up again several times. No luck!
Does anyone else see this error?
Any help?

Go into Settings>Mail, Contacts, Calendars>your account>Outgoing mail Server SMTP>Primary Server then turn Server ON and fill in both User Name +Password under Outgoing Mail Server.

Will Exchange ever support sending mail from a secondary smtp address?

Most here probably know this but a quick recap:
User has PrimarySMTP address of [email protected] and secondary SMTP of
[email protected] In Outlook, if you set the secondary SMTP address in the "From" field, Exchange will throw an "undeliverable" error stating you're not authorized to send mail as
this user. I know there's
3rd party tools that can help you with this, and ways to circumvent this (using extra accounts or distrigroups) but it's actually really annoying. I've been involved with a lot of companies with different brands (and a domain for each brand) and
who want to communicate with the outside world using these different brandnames. One salesmanager could be involved with different brands and right now you'll have to create a new account or group for each and every brand/domainname.
With every new Exchange one of the first things I check if this behaviour has changed.. Will this ever be implemented? Is there anyone here that could shed some light on that? Is there a reason why this does not change?
Kind regards,
Remco Roxs

Nobody who participates in these forums knows what the future holds at Microsoft. If we did, we wouldn't be able to share it with you in any case because we'd be sworn to secrecy.
Just buy this for your sales manager: http://www.ivasoft.biz/choosefrom2007.shtml
Or just tell him to use two mailboxes.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Send mail vi error 500

I'm having the following error in SMTP Email Send Text Message vi
500 Syntax error, command "Content-Type: text/plain; charset="us-ascii"" unrecognized
could somebody provide help?
thanks

I'm guessing you're using LabVIEW 7.1 or earlier, and I'm also guessing you're using a non-English operating system and/or LabVIEW. Try changing the "charset" input of the e-mail VI to 'utf-8' and see if that helps. In LabVIEW 8.0 the e-mail VIs default to the utf-8 charset instead of us-ascii.
Hope this helps,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Sender Mail Adapter Error: exception caught during processing mail message;

HI , I am configuring mail to file scenario. Need to read mail content (no need to capture From,TO or Subject details) and create a file with the content in the mail.
Need to read mails from microsoft outlook. Exchange server has been configured for POP3 protocol.
Following are the details provoding in sender mail adapter:
URL: provided url in the format: pop://<server name>
Authentication method: plain
provided user credinetions to access mails.
poll interval - 1min
content encoding none.
processing parameters : quality of service-exactly once
Since there is no need to capture From,TO or Subject details, didn't select the option - use mail package.
Verified for unread mails in the mail box and made sure that there are few unread mails.
Also, created data types and other components in IR and completed mapping.
But after starting sender mail communication channel, getting error "exception caught during processing mail message; java.lang.NullPointerException" in RWB-adapter-communication channel monitoring.
please let me know what needs to be done to resolve this error.
Thanks.

HI Stefan, i tried, but still it is giving same error. Yes, i am able to access outlook mail with the user credentials given in the communication channel to access exchange server.
I am using message protocol: xipayload . Also since i dont have to capture TO,from,subject details., created data type just with one element of type string, not in the standard format .Does this makes any difference.

Can no longer send mail - strange errors/activity

I'm hoping a guru can help me. This is driving me insane. My mail has worked perfectly for years. Over the past 2 days, it can no longer send mail. I can recieve, but not send.
It first began with error messages saying that it couldn't use Port 25. My ISP doesn't block this port, so I tried using four other mail servers from other email accounts. Again, all give the same error. Now when I try to send a message, they just sit in my out box. When I try to resend, it does nothing. The activity monitor quickly states "Copying message to outbox". That's it.
I'm at a loss. Any help is really appreciated.

Ignore this message, I JUST WORKED IT OUT.
It looks like there is another unsecure wireless network in our building and for some reason my Powerbook defaulted to using that, rather than my own wireless account.
So with this other connection I could surf/recieve but I couldn't send out.
The variables never cease to amaze me.

SAP PI Sender Mail Adapter error : Unexpected User response

Hello ,
I developed a scenario which requires Sender mail Adapter to connect a Third party system to PI, by going thro the links .
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
and PDFs in SDN.
When configured the sender mail adapter using POP Mail Server,faced the following error:gave the correct URL and Login credentials.
+" exception caught during processing mail message; java.io.IOException: unexpected user response; read -ERR Command is not valid in this state."+
Then used IMAP for the same mail server : error:
"exception caught during processing mail message; java.io.IOException: unexpected login response; read 001F BAD Command received in Invalid state."
Tried with another Mail server :
"exception caught during processing mail message; java.net.ConnectException: Connection timed out".
Can you please help, what be the cause? how to rectify it?

Hi
There might be an connectivity issue from PI server to mail server. Please check with your BASIS to resolve the issue.,
Regards
Ramg

Sender mail adapter error

hi all,
I am working on mail-mail scenario where in when i monitor my sender CC it is displaying following error:
"exception caught during processing mail message; java.io.IOException: unexpected login response; read 001F BAD Protocol Error: "Invalid string supplied for user name".
Please help me out in tracing the error as i am not able to trace it.
Sender CC configurations are as follows
>> Transport protocol - POP3.
>> Message Protocol - XIALL
>>URL - pop://pop.gmail.com
>>User - [email protected]
>>password - xxxxxx
Thanks and Regards,
Amit

hi ramesh,
I have changed user to amit.tsec and stopped and started the channel again and the job got scheduled and after the scheduling time it shows following error :
exception caught during processing mail message; java.net.ConnectException: Connection timed out: connect
Please see if u have any idea on this error and can u give me the demo scenario on this sender mail adapter right from scratch i.e Data type.
Thanks and Regards,
Amit.

Sending mail EFG_GEN_SEND_EMAIL ..error in SMTP

Similar Messages

Maybe you are looking for