Sending mail failure

Hi
I cannot send any e_mail via yahoo on my iPhone via wifi..(via apple.stmp.yahoo)I already receive mails but Ican't answer or even send new mails?? I re set my yahoo account on my PC and turned off my ip, then reset it and chosed yahoo mail but sending mails remains impossible..any help??thank you

Hi,
Does your network is always available? Your scenario is so strange. Please check if you have missed something according to this article:
https://msdn.microsoft.com/en-us/library/ms159155.aspx.

Similar Messages

SSRS Subscription LastStatus "Failure sending mail: Failure sending mail."

SSRS 2012, SQL 2012 SP2.
We have about 50 different daily subscriptions that go out. In the last month or so, probably over 30% of SSRS subscriptions are getting this error and no e-mail is sent. I have tested out the reports with the parameters and the reports run just
fine on demand for both the user and myself. I'll change the subscription forward for testing, and it will intermittently work or fail even when no traffic is hitting our database so I dont think it's a matter of performance.
I see nothing in the error logs, and I see nothing in the logtable 2, or 3 in ssrs as suggested by a few MSDB sites.
The only spot I can even see this error, is when viewing the subscription. I have done LOTS of searching, and most people get a helpful error after "Failure sending mail" where as I only get 'Failure sending mail: Failure sending mail"

Hi,
Does your network is always available? Your scenario is so strange. Please check if you have missed something according to this article:
https://msdn.microsoft.com/en-us/library/ms159155.aspx.

Ssrs 2012 - send email failure

Hi,
I have scheduled a report but this is the error it shows:
Failure sending mail: Failure sending mail.
Do you know where I can get detailed information on the error?
Any suggestions please?

Did you setup mail profile properly?
see the subscription config to get more details on error first
http://www.sqldbpros.com/2013/11/ssrs-subscription-error-failure-sending-mail-the-report-server-has-encountered-a-configuration-error-mail-will-not-be-resent/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Hi,
I have read your links.... thank you, and believe what I have done is correct.
But may be if I get more detailed information about this error that I get from a log file or somewhere then I can investigate the error further.
I should mentioned that the sql query in the link you sent does not return any rows and I do not know where to see the subscription Configuration?
Is there a way to see more information about the error message I get?
Thank you
Yep..The first place where you can check is the subscriptions page in report server
Also see this similar discusiion
http://social.technet.microsoft.com/Forums/en-US/e18054ca-82ee-4281-8217-078013e1109f/ssrs-error-failure-sending-mail-the-report-server-has-encountered-a-configuration-error-mail-will?forum=sqlreportingservices
And this link
http://sirsql.net/blog/2012/4/19/ssrsemail-subscriptions-not-being-delivered.html
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Word couldn't send mail because of MAPI failure, Unspecified error.

This issue is crossposted in Microsoft Answers Word and OUTLOOK. I am posting here in hopes that someone at Mircrosoft may have a solution or at least elevate the issue to someone who does.
http://answers.microsoft.com/en-us/office/forum/officeversion_other-word/word-could-not-send-mail-because-of-mapi-failure/f62678fe-ef1d-42b5-8cfe-1e43d6a1d609
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/word-couldnt-send-mail-due-to-mapi-failure/1f03cf74-9258-411b-9e2b-e41cb5006d71
I dabble with VBA and write and maintain several amateur Word Add-Ins. Accordingly, I have Word 2003, 2007, 2010 and 2013 installed on my PC. They get along fine. However, I am unable to "Share" or "Send" an open Word
document as an E-mail attachment in any version! In each case Word returns an error mesage "Word couldn't send mail because of a MAPI failure, Unspecified error (the same issue occurs with Excel and Powerpoint except the error dialog is a bit different.)
Using Word 2003, I (CAN) "Send to (Mail recipient for review)" in which case OUTLOOK is opened with the document as an attachment. I can also "Send to Mail Recipient" from Windows Explorer, in which case the Word file is attached to
an OUTLOOK message, and I can create an instance of OUTLOOK and send mail from Word using VBA.
I have repaired all Office versions. I have removed the registry keys for all office versions and repaired all versions again. I have run "fixmapi" until I am blue in the face. I have renamed the MAPI32.DLL files and ran sfc \scannow
to ensure that the MAPI32.DLL file is not corrupt. In view of these actions and in view of what I can do, something tells me that the MAPI files are fine.
So what is this "Unspecified error?" This problem is rife on the internet and most of the "canned" solutions have been marked "Answered" by some MS support engineer. These "canned" solutions might have
fixed the issue at one point, but they don't work now. At least not for me.
Thanks.
Greg Maxey Please visit my website at: http://gregmaxey.mvps.org/word_tips.htm

Hello Greg,
I noted that there are 2 knowledge articles that describe scenarios where you may encounter this error.
KB 291152 You receive a "Word couldn't send mail because of MAPI failure" error message when you try to send a Word document as an e-mail attachment in Word 2002
http://support.microsoft.com/kb/291152/EN-US
KB 929362 You cannot send a file by clicking Send in a different program when Outlook 2007 is running as administrator
http://support.microsoft.com/kb/929362/EN-US
Please let me know the following:
1. What version of Outlook are you using?
2. Do you have Outlook open when you attempt the File > Share > Email as attachment from Word? If not, does the error occur if you open Outlook, open Word and then try to send the email?
3. If you close/reopen Word and then try the send again, do you get the same error?
4. Are you running either Outlook or Word in an elevated mode?
5. What happens if you start both Outlook and Word as "Run As Administrator". You may have to right-click each applications' .exe file to be able to choose the "Run As Administrator" option.
6. Do you get the same error when using File > Share > Email as attachment using Excel?
7. In Internet Explorer, open the Internet Options. On the General tab within the browsing history, delete your temporary Internet files and website files
8. Does the issue occur in selective startup mode?
Steps to setup selective startup mode:
Click on the Windows Start button, in the Search box type msconfig and then hit enter. This should open up the System Configuration Utility. Make the following adjustments within each tab.
Services Tab:
- Check the option 'Hide All Microsoft Services'
- Click on button 'Disable All'
Startup Tab:
- Click the button 'Disable All'
- Go back through the list and enable any Microsoft items
Click Ok. It will say “You must restart your computer for some of the changes
made by System Configuration to take effect”. Hit the ‘Restart’ button.
When the PC reboots try to run your test again.
To return back to a normal boot launch msconfig again and choose 'normal startup' on the general tab, click Ok and then reboot the PC.
Regards,
Dennis

SQL Server Reporting Services Subscriptions - Failure sending mail

Hello All,
I am having a problem with using subscriptions to send my reporting services report by email.
Getting the following error:
Failure sending mail: The message could not be sent to the SMTP server. The transport error code was 0x800ccc6d. The server response was 552 Error: message too large
While browsing for other reports in the report manager(reports created by others staffs), i could find that these reports were sent by email successfully.
So not understanding why mine has a problem. logically it could be that the report is too big?
Anybody has a solution or suggestion?
Thanking you in advance

Hi LenitaS,
For first question, we can check the item "IncludeLink" to embed the link in the mail. Or, embed the link the manually by putting a link in the "Comment" field. The URL should be a standard URL Access:
http://<reportserver>/reprotserver?/reportpath&rc:format=<format>
For the second question, you are right. We can follow these setps to work around the issue:
1.Create a file shared subscription, save the export to a shared folder.
2.Create a E-Mail delivery subscription, embed the file's path in the mail. We can set the file's path in "Comment" field of the E-Mail delivery. The path should be someone like this:
\\<sharedfolder>\<export report>
In this case, the exported report's name cannot be dynamic.
If there is anything unclear, please feel free to ask.
Thanks,
Jin ChenJin Chen - MSFT

SSRS: Failure sending mail: The transport failed to connect to the server.

I run SSRS and email reports using SMTP service on a Windows Server 2008 R2 box. This has been working for months and stopped today around noon.
I have checked all SMTP settings and verified they are correct. I can send an email from SQL Server Management Studio, using SMTP service with no trouble.
Now in SSRS I am getting this message:
Failure sending mail: The transport failed to connect to the server.
I have read every link when I google this message or type it into bing.com; yet cannot find a reason why SSRS has suddenly stopped emailing my reports.
I have restarted the server in question, I have changed account names, I have changed passwords, yet nothing is working.
I even approached our senior dba about it and he has never seen this happen.
Has anyone else experienced this issue?
Thank you,
Jessica

Thank you JJordheim.
IDS is not an issue. Neither is the Windows Firewall on the server. I actually turned it off while troubleshooting to make sure it was not causing the issue.
SSRS and my SMTP Virtual service are on the same server. I am running the SMTP service through IIS. I even created a new SMTP Service to test with. No luck.
My rsreportserver.config file looks fine, or at least it does to me. Posted below:
<Configuration>
<Dsn>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAoroltqyZFk6Vi+2kNEmsQAQAAAAiAAAAUgBlAHAAbwBy
AHQAaQBuAGcAIABTAGUAcgB2AGUAcgAAABBmAAAAAQAAIAAAALMXYz8ommSjoJt2CZCuZmzmS+bo
5d4pT033TPn7WZoiAAAAAA6AAAAAAgAAIAAAAEmwCgTd0Xo4ssE0WGSo7KC3+nsOZd2sR/PT6hUQ
5SR44AAAAL4ReAnyjUBENbH63/qM8orgHrcG3s/MyNdjuBnfKhwlqauRfxwcNgjd7PtXLvS8gnBq
kTji38EuQHBOJ63rklEclaejzkcA45rAbzLqWBi7oftw1SwHahZQvp+zxFdKVuAGnhEjiKvcrgzl
ebfWNTjY/pjyJ9bwvF7vReIXrRXecPTjbE6wOiYFggY6pVCXvJCRvoUNMiLJC3PCIi58LOqVjPUO
juyIZUrNqTPZlhswNU0M+mM7W6YRqPtF+xXx1FBSe0PShD+29IgBOYBRFFfDbW93tbnw5nj5/xpk
I2GlQAAAAJoNASVS7KABbUZke+huE5HzjaXk1o7Sq9REu4Svlry1INKqJfo+dbGDWUAKEwbClVoO
RNs8QwPFYNIXyq6vDD0=</Dsn>
<ConnectionType>Default</ConnectionType>
<LogonUser></LogonUser>
<LogonDomain></LogonDomain>
<LogonCred></LogonCred>
<InstanceId>MSRS10_50.MSSQLSERVER</InstanceId>
<InstallationID>{e93dd46f-7646-44e2-9997-acc3cb001828}</InstallationID>
<Add Key="SecureConnectionLevel" Value="0"/>
<Add Key="CleanupCycleMinutes" Value="10"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
<Add Key="RunningRequestsScavengerCycle" Value="60"/>
<Add Key="RunningRequestsDbCycle" Value="60"/>
<Add Key="RunningRequestsAge" Value="30"/>
<Add Key="MaxScheduleWait" Value="5"/>
<Add Key="DisplayErrorLink" Value="true"/>
<Add Key="WebServiceUseFileShareStorage" Value="false"/>





<Add Key="WatsonFlags" Value="0x0428"/>
<Add Key="WatsonDumpOnExceptions" Value="Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException"/>
<Add Key="WatsonDumpExcludeIfContainsExceptions" Value="System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException"/>
<URLReservations>
  <Application>
   <Name>ReportServerWebService</Name>
   <VirtualDirectory>ReportServer</VirtualDirectory>
   <URLs>
    <URL>
     <UrlString>http://+:80</UrlString>
     <AccountSid>S-1-5-19</AccountSid>
     <AccountName>NT Authority\LocalService</AccountName>
    </URL>
   </URLs>
  </Application>
  <Application>
   <Name>ReportManager</Name>
   <VirtualDirectory>Reports</VirtualDirectory>
   <URLs>
    <URL>
     <UrlString>http://+:80</UrlString>
     <AccountSid>S-1-5-19</AccountSid>
     <AccountName>NT Authority\LocalService</AccountName>
    </URL>
   </URLs>
  </Application>
</URLReservations>
<Authentication>
  <AuthenticationTypes>
   <RSWindowsNegotiate/>
   <RSWindowsNTLM/>
  </AuthenticationTypes>
  <RSWindowsExtendedProtectionLevel>Off</RSWindowsExtendedProtectionLevel>
  <RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
  <EnableAuthPersistence>true</EnableAuthPersistence>
</Authentication>
<Service>
  <IsSchedulingService>True</IsSchedulingService>
  <IsNotificationService>True</IsNotificationService>
  <IsEventService>True</IsEventService>
  <PollingInterval>10</PollingInterval>
  <WindowsServiceUseFileShareStorage>False</WindowsServiceUseFileShareStorage>
  <MemorySafetyMargin>80</MemorySafetyMargin>
  <MemoryThreshold>90</MemoryThreshold>
  <RecycleTime>720</RecycleTime>
  <MaxAppDomainUnloadTime>30</MaxAppDomainUnloadTime>
  <MaxQueueThreads>0</MaxQueueThreads>
  <UrlRoot>http://abraham/Reports</UrlRoot>
  <UnattendedExecutionAccount>
   <UserName></UserName>
   <Password></Password>
   <Domain></Domain>
  </UnattendedExecutionAccount>
  <PolicyLevel>rssrvpolicy.config</PolicyLevel>
  <IsWebServiceEnabled>True</IsWebServiceEnabled>
  <IsReportManagerEnabled>True</IsReportManagerEnabled>
  <FileShareStorageLocation>
   <Path>
   </Path>
  </FileShareStorageLocation>
</Service>
<UI>
  <ReportServerUrl>
  </ReportServerUrl>
  <PageCountMode>Estimate</PageCountMode>
</UI>
<Extensions>
  <Delivery>
   <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider,ReportingServicesFileShareDeliveryProvider">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
     <FileShareConfiguration>
      <ExcludedRenderFormats>
       <RenderingExtension>HTMLOWC</RenderingExtension>
       <RenderingExtension>NULL</RenderingExtension>
       <RenderingExtension>RGDI</RenderingExtension>
      </ExcludedRenderFormats>
     </FileShareConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
     <RSEmailDPConfiguration>
      <SMTPServer>192.168.11.210</SMTPServer>
      <SMTPServerPort></SMTPServerPort>
      <SMTPAccountName>
      </SMTPAccountName>
      <SMTPConnectionTimeout>
      </SMTPConnectionTimeout>
      <SMTPServerPickupDirectory>
      </SMTPServerPickupDirectory>
      <SMTPUseSSL>
      </SMTPUseSSL>
      <SendUsing>2</SendUsing>
      <SMTPAuthenticate>
      </SMTPAuthenticate>
      <From>[email protected]</From>
      <EmbeddedRenderFormats>
       <RenderingExtension>MHTML</RenderingExtension>
      </EmbeddedRenderFormats>
      <PrivilegedUserRenderFormats>
      </PrivilegedUserRenderFormats>
      <ExcludedRenderFormats>
       <RenderingExtension>HTMLOWC</RenderingExtension>
       <RenderingExtension>NULL</RenderingExtension>
       <RenderingExtension>RGDI</RenderingExtension>
      </ExcludedRenderFormats>
      <SendEmailToUserAlias>True</SendEmailToUserAlias>
      <DefaultHostName>
      </DefaultHostName>
      <PermittedHosts>
      </PermittedHosts>
     </RSEmailDPConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="Report Server DocumentLibrary" Type="Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider,ReportingServicesSharePointDeliveryExtension">
    <MaxRetries>3</MaxRetries>
    <SecondsBeforeRetry>900</SecondsBeforeRetry>
    <Configuration>
     <DocumentLibraryConfiguration>
      <ExcludedRenderFormats>
       <RenderingExtension>HTMLOWC</RenderingExtension>
       <RenderingExtension>NULL</RenderingExtension>
       <RenderingExtension>RGDI</RenderingExtension>
      </ExcludedRenderFormats>
     </DocumentLibraryConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="NULL" Type="Microsoft.ReportingServices.NullDeliveryProvider.NullProvider,ReportingServicesNullDeliveryProvider"/>
  </Delivery>
  <DeliveryUI>
   <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailDeliveryProviderControl,ReportingServicesEmailDeliveryProvider">
    <DefaultDeliveryExtension>True</DefaultDeliveryExtension>
    <Configuration>
     <RSEmailDPConfiguration>
      <DefaultRenderingExtension>MHTML</DefaultRenderingExtension>
     </RSEmailDPConfiguration>
    </Configuration>
   </Extension>
   <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareUIControl,ReportingServicesFileShareDeliveryProvider"/>
  </DeliveryUI>
  <Render>
   <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.DataRenderer.XmlDataReport,Microsoft.ReportingServices.DataRendering"/>
   <Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="false"/>
   <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering"/>
   <Extension Name="ATOM" Type="Microsoft.ReportingServices.Rendering.DataRenderer.AtomDataReport,Microsoft.ReportingServices.DataRendering" Visible="false"/>
   <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer,Microsoft.ReportingServices.ImageRendering"/>
   <Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RGDIRenderer,Microsoft.ReportingServices.ImageRendering" Visible="false"/>
   <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false"/>
   <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering"/>
   <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
   <Extension Name="RPL" Type="Microsoft.ReportingServices.Rendering.RPLRendering.RPLRenderer,Microsoft.ReportingServices.RPLRendering" Visible="false" LogAllExecutionRequests="false"/>
   <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageRenderer,Microsoft.ReportingServices.ImageRendering"/>
   <Extension Name="WORD" Type="Microsoft.ReportingServices.Rendering.WordRenderer.WordDocumentRenderer,Microsoft.ReportingServices.WordRendering"/>
  </Render>
  <Data>
   <Extension Name="SQL" Type="Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.DataExtensions.SqlAzureConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.DataExtensions.SqlDwConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="OLEDB" Type="Microsoft.ReportingServices.DataExtensions.OleDbConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.DataExtensions.AdoMdConnection,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="ORACLE" Type="Microsoft.ReportingServices.DataExtensions.OracleClientConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="ODBC" Type="Microsoft.ReportingServices.DataExtensions.OdbcConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="XML" Type="Microsoft.ReportingServices.DataExtensions.XmlDPConnection,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SHAREPOINTLIST" Type="Microsoft.ReportingServices.DataExtensions.SharePointList.SPListConnection,Microsoft.ReportingServices.DataExtensions"/>
   <Extension Name="SAPBW" Type="Microsoft.ReportingServices.DataExtensions.SapBw.SapBwConnection,Microsoft.ReportingServices.DataExtensions.SapBw"/>
   <Extension Name="ESSBASE" Type="Microsoft.ReportingServices.DataExtensions.Essbase.EssbaseConnection,Microsoft.ReportingServices.DataExtensions.Essbase"/>
   <Extension Name="TERADATA" Type="Microsoft.ReportingServices.DataExtensions.TeradataConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
  </Data>
  <SemanticQuery>
   <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>False</EnableMathOpCasting>
    </Configuration>
   </Extension>
   <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>False</EnableMathOpCasting>
    </Configuration>
   </Extension>
   <Extension Name="SQLPDW" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQLADW.MSSqlAdwSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>False</EnableMathOpCasting>
    </Configuration>
   </Extension>
   <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>True</EnableMathOpCasting>
     <DisableNO_MERGEInLeftOuters>False</DisableNO_MERGEInLeftOuters>
     <EnableUnistr>False</EnableUnistr>
     <DisableTSTruncation>False</DisableTSTruncation>
    </Configuration>
   </Extension>
   <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
    <Configuration>
     <EnableMathOpCasting>True</EnableMathOpCasting>
     <ReplaceFunctionName>oREPLACE</ReplaceFunctionName>
    </Configuration>
   </Extension>
   <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.QueryExecution.ASSemanticQueryCommand,Microsoft.AnalysisServices.Modeling"/>
  </SemanticQuery>
  <ModelGeneration>
   <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="SQLAZURE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="TERADATA" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Teradata.TdSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
   <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.Generation.ModelGeneratorExtention,Microsoft.AnalysisServices.Modeling"/>
  </ModelGeneration>
  <Security>
   <Extension Name="Windows" Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization, Microsoft.ReportingServices.Authorization"/>
  </Security>
  <Authentication>
   <Extension Name="Windows" Type="Microsoft.ReportingServices.Authentication.WindowsAuthentication, Microsoft.ReportingServices.Authorization"/>
  </Authentication>
  <EventProcessing>
   <Extension Name="SnapShot Extension" Type="Microsoft.ReportingServices.Library.HistorySnapShotCreatedHandler,ReportingServicesLibrary">
    <Event>
     <Type>ReportHistorySnapshotCreated</Type>
    </Event>
   </Extension>
   <Extension Name="Timed Subscription Extension" Type="Microsoft.ReportingServices.Library.TimedSubscriptionHandler,ReportingServicesLibrary">
    <Event>
     <Type>TimedSubscription</Type>
    </Event>
   </Extension>
   <Extension Name="Cache Refresh Plan Extension" Type="Microsoft.ReportingServices.Library.CacheRefreshPlanHandler,ReportingServicesLibrary">
    <Event>
     <Type>RefreshCache</Type>
    </Event>
   </Extension>
   <Extension Name="Cache Update Extension" Type="Microsoft.ReportingServices.Library.ReportExecutionSnapshotUpdateEventHandler,ReportingServicesLibrary">
    <Event>
     <Type>SnapshotUpdated</Type>
    </Event>
   </Extension>
  </EventProcessing>
</Extensions>
<MapTileServerConfiguration>
  <MaxConnections>2</MaxConnections>
  <Timeout>10</Timeout>
  <AppID>(Default)</AppID>
  <CacheLevel>Default</CacheLevel>
</MapTileServerConfiguration>
</Configuration>

Failure writing file and Failure sending mail: The user or group name is not recognized.Mail will not be resent.

Dear All,
I am using MSSQL SSRS 2008.
All the reports run properly when viewed via a web browser. However for subscription, I am having a strange
experience.
The subscription having intermitten failure. I need to execute multiple times to get it work.
Following is the exception I am getting:-
Failure sending mail: The user or group name 'xxxxx' is not recognized.Mail will not be resent.
Failure writing file DailyPolicyExportCDN_ST@timestamp : The user or group name 'xxxxx' is not recognized.
Following is the exception I retrieve from log files.
webserver!ReportServer_0-2!1b0c!07/31/2014-05:25:09:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeClientDisconnectionException: A client has disconnected from the Report Server Web service application
domain ReportServer_MSSQLSERVER_0-2-130512716074991980. No corrective action is required. An error code has been submitted to ASP.NET to release the connection. The error code is 800708CA. ---> System.Runtime.InteropServices.COMException: This network connection
does not exist. (Exception from HRESULT: 0x800708CA)
Any idea what went wrong?
Thanks in advance

Hi NeoCK,
According to your description, you can access your report successfully, but it fail to send e-mail subscription. Right?
In this scenario, since you can access the report successfully, so this user has permission on report server. Please go to E-mail setting in your Reporting Services Configuration Manager, check if the current user has permission on that SMTP server.
If this is still not working, please recreate the subscription and try again.
Reference:
SUBSCRIPTION
ERRORs : Failure sending mail: The user or group name 'CB_OFFICE\XXXX' is not recognized.
The user or group name 'MYDOMAIN\myuser'
is not recognized
SSRS
2008: Failure writing file ... The user or group name 'domain\user' is not recognized
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Reporting Subscriptions Failing - "Failure Sending Mail". Must be something obvious!

I've spent the last few hours on this and cannot for the life of me figure what it is that I have overlooked. I have created a report email subscription, nothing particularly fancy. It is always failing on:
Failure sending mail: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1 Client was not authenticated
The setup:
SCCM 2012 R2
SQL Server 2012 (on the SCCM server)
Exchange 2010
SCCM - Email Notification Component is configured correctly. The SMTP test works and I also receive alerts when one of my SCEP rules are triggered. All good.
SQL Management Studio - DataBase Mail is configured; sending a test e-mail works. Using Basic Authentication with a network account specified.
Exchange 2010 has a Receiver Connector created to relay e-mails from the SCCM Server.
Reporting Services Configuration Manager - Email Section has been completed.
Can anyone point me in the right direction?

Hi Garth,
Thanks for the response. I was under the impression that CM12 uses SSRS (and thus the SQL Mail configuration) to send out the Subscription Reports, if that is definitely not the case I can eliminate that part from my configuration all together.
So, to clarify:
CM12 Alerts have always been working fine - no issue here and I understand this is a different kettle of fish to SSRS.
<cite class="ipb" style="padding:0px 10px 8px;border-width:0px 2px 2px;border-left-style:solid;border-left-color:#989898;border-bottom-style:solid;border-bottom-color:#e5e5e5;border-right-style:solid;border-right-color:#e5e5e5;font-weight:bold;font-style:normal;overflow-x:auto;margin:-1px
-12px 8px;width:1299px;display:block;-webkit-user-select:none;background:-webkit-gradient(linear, 0% 0%, 0% 100%, from(rgb(246, 246, 246)), to(rgb(229, 229, 229)));">Quote</cite>Why do you think that SSRS can send test message, where did you do this action?
I actioned the "Send Test E-mail" option when you right-click on the Database Mail option within SQL2012. However, as you pointed out already, if this has absolutely
nothing to do with the Subscription Reports configuration, then this is no longer relevant. If anything it just proves that e-mails can be sent via the Exchange server (using basic authentication).
Now, I guess, I just need to figure what within SSRS Configuration Manager is missing, my trouble is that there isn't any detailed settings I can configure
and Exchange logs doesn't indicate anything that isn't already reported by SCCM:
2014-06-25T14:09:14.168Z,Exchange\SCCM01 - Subscription Reports Receiver,08D15B57A7508DA3,21,10.2.2.202:25,10.2.2.213:63905,>,530 5.7.1 Client was not authenticated,

Sending Mail on the Failure of Outbound IDOC Creation

Hi Experts
I Have a requirement to send mail on failure of Outbout creation . Any standard report exists ?
Any sample programmes
Thanks and regards
RMP

I think what you are asking for is possible, but I'm not sure how. Try posting this question on the Process Integration forum (PI uses iDocs), I'm sure someone will know the answer.

Sending mail with mail client failure problem

My installation config :
Solaris 10
Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
single host installation
since past few days , I encounter a new problem with SJMS after finish installation . When using mail client Thunderbird 2.0.0.23 , sending mail message to outside email providers / non-local (e.g correctly typed yahoo/gmail) domain always failed whenever I use from outside networks/Internet ( smtp setting in mail client require username and password authentication ) . however,users between the same local domain is OK .
The thunderbird always prompt :
" The mail server responded: Recipient address rejected: User unknown. Please check the message recipients and try again "
The problem does not occured when I was using inside LAN and connected locally with the server host .
but, I am able and succesful to telnet to port 25 using command via outside the network, indicating the port and server not being blocked by firewall :
telnet smtp.abcxyz.com 25
220 ***************************************
any help is welcome.
Thanks

I would be good to have the full output from the "imsimta version" command. That gives OS information too, which may not be pertinent to this specific problem, but it is better to give all the info than for us to wish we had it.
Also, what is the full, exact error message you get when you try this with telnet to port 25 and it fails? It may be significant to see the exact text because it could be coming from some intermediate device rather than the Messaging Server itself.
If you are getting connected to the Messaging Server's MTA, you should find some indication of this in the mail.log_current file. If not, I would say to make sure the "logging" keyword is on the "defaults" channel and add LOG_CONNECTION=3 LOG_PROCESS=1 LOG_USERNAME=1 to option.dat and do imsimta cnbuild; and imsimta restart dispatcher. Then repeat the test. If you still get nothing in mail.log_current about that test, then I would conclude the connection is not getting to the Messaging Server's MTA but rather the failure is coming from a firewall or some other intermediate device.
If your mail client authenticates to the MTA when trying to send mail from outside your network, this should result in the message submission being switched to the tcp_auth channel instead of tcp_local and that should allow the message to go thru. If the connect is making it to the MTA and being rejected there, it will be interesting to see which channel is involved. The mail.log_current records should show that.

Can SunMC send mail alert to sysadmin for any hardware failure?

Hi All
for SunMC 3.61 or 4.0,, Sunmc can send mail alert to sysadmin if hardware failure.
1. I noticed that the email actions from Attribute Editor Actions Panel is not for all the hardware attribute.
is there any way to send mail alert to sysadmin for any hardware failure?
2. does SunMC monitor Sun Fire T2000 hardware fully?

Hi EricTan,
erictan wrote:
Hi All
for SunMC 3.61 or 4.0,, Sunmc can send mail alert to sysadmin if hardware failure.
1. I noticed that the email actions from Attribute Editor Actions Panel is not for all the hardware attribute.
is there any way to send mail alert to sysadmin for any hardware failure?The out-of-the box notifications in SunMC must be set up for every data point on every system, which can be a pain to configure and manage in all but the smallest environments. And as you've noticed, for some hardware attributes there are no "Actions" tabs the allow you to configure email. To gain the features of centralized notification, and to get alarms from all sources of events in SunMC, you should consider installing [PrimeAlert EventAction|http://www.halcyoninc.com/products/EventAction/index.php] . It ships with a 30-day eval license, and if you need any help setting it up, please let me know.
2. does SunMC monitor Sun Fire T2000 hardware fully?Yes, the Tx000 series systems have some of the best hardware support available in SunMC. As an example you can look at a T2000 screenshot and list of hardware info [in this post about SunMC and xVM Ops Center|http://forums.halcyoninc.com/showthread.php?t=109] .
Regards,
Regards,
[email protected]
[http://www.HalcyonInc.com|http://www.HalcyonInc.com]
New !! : [http://forums.HalcyonInc.com|http://forums.HalcyonInc.com] !!

The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2013-04-30T16:36:52). Exception Message: Cannot send mails to mail server. (Mailbox unavailable. The server response was: 5.7.1 Client does not

Interesting db mail issue. If i click send test mail from sql mgmt studio, it works fine, but when i execute a SP to send a mail, it fails. One thing I noticed is that the "LastModified" column in the mail log shows the domain account when a test
mail was sent from mgmt studio, but show "sa" when the SP was used to send mail.
This is from SQL 2012, did not see this in sql 2008, looks like 2008 always used the service account. any ideas ?
Get this error:
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2013-04-30T16:36:52). Exception Message: Cannot send mails to mail server. (Mailbox unavailable. The server response was: 5.7.1 Client does not
Thanks.
Ranga

Hi Ranga,
I also use SQL Server 2012. I send a test email through SQL Server Management and the last modified By “sa”.
If you used stored procedure to send a test email. Please use the command below:
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'Adventure Works Administrator',
@recipients = '[email protected]',
@body = 'The stored procedure finished successfully.',
@subject = 'Automated Success Message' ;
I can both send test email through SQL Server Management Studio and SP. Make sure you have the right profile. Since you could send test mail via SQL Server Management Studio, please try again to send it via SP.
Thanks.
If you have any feedback on our support, please click
here.
Maggie Luo
TechNet Community Support

Failure sending mail: The transport failed to connect to the server.

Hi I have created Emailsubscription first time in my production server ,am facing this issue ,subscription were not created ,its shows me the follwing error.We did everything fine.
HI I have Configured Configuration settings properly ,
I have did the sMTP settings correctly,
I have facing this error since a long while.
Failure sending mail: The transport failed to connect to the server.
In my log file i have found these are the errors and warnings.
1.library!DefaultDomain!3738!04/23/2015-12:28:38:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
2.library!DefaultDomain!3738!04/23/2015-12:28:38:: w WARN: Initializing UrlRoot to default value of '' because it was incorrectly specified in Configuration file as ''.
3.notification!WindowsService_2!2898!04/23/2015-12:39:29:: e ERROR: Error occured processing subscription 3efe998d-0c40-460e-bc13-00f6c8d0a7f8: Failure sending mail: The transport failed to connect to the server.
4.emailextension!WindowsService_2!2898!04/23/2015-12:39:29:: e ERROR: Error sending email. System.Runtime.InteropServices.COMException (0x80040213): The transport failed to connect to the server.
5. library!ReportServer_0-4!2368!04/23/2015-12:52:30:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException:
This operation is not supported on a report server that runs in native mode.;
6.extensionfactory!ReportManager_0-3!1224!04/23/2015-12:52:31:: w WARN: The extension Report Server Email does not have a LocalizedNameAttribute.
7.library!ReportServer_0-2!331c!04/23/2015-12:25:41:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException:
This operation is not supported on a report server that runs in native mode.;
please go through this errors and give me the right soluction to this..
Awaitng for your reply's

Hi Ychinnari,
According to your description, the subscription is failed to send an email with error “Failure sending mail: The transport failed to connect to the server.”.
In your scenario, though you have mentioned you have configured the SMTP and E-mail delivery correctly, please also check those settings according to official documents below to avoid small mistakes:
How to: Configure a Report Server for E-mail Delivery (Reporting Services Configuration)
How to Use Telnet to Test SMTP Communication
Also please check if you have specified the correct E-mail Settings in Report Server Configuration Manager refer to this article:
E-mail Settings - Configuration Manager (SSRS Native Mode).
Finally, please check if you have installed an antivirus on the SSRS server. And check if any firewall role blocks the connection between report server and SMTP.
Reference:
Failure sending mail: The transport failed to connect to the server
SCOM: Report Subscription “Failure sending mail: The transport failed to connect to the server”
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Failure sending mail: the specified string is not in the form required for an e-mail address.mail will not be resent. Email Notification Component Properties works fine.

I know there are a few other questions like this but I can't seem to find how it's relating to my issue. I am getting the familar failure sending mail: the specified string is not in the form required for an e-mail address.mail will not be resent.
in the reports feature of sccm.
I just picked a sample report Compliance 4. I right clicked hit create subscription and input my email into the TO: field. When it runs i get the above error. I checked the email notifcation under configure site components and was able
to successfully send a test message from there but I dont get why it doesnt work on the subscription.
Any Ideas?

The log is pretty big so im not sure where I can upload it. I think it would be too big to paste here but I have copied what I think you are looking for in the log and will paste it here. Let me know some place I can send you the full log file
or if you want a different log.
schedule!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Handling Event TimedSubscription with data 2946db38-5a07-4fb1-ad06-d7714e25b1ba.
library!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Schedule 534ad96b-a680-4630-a865-9f99e1087e3f executed at 12/07/2014 00:02:03.
schedule!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Creating Time based subscription notification for subscription: 2946db38-5a07-4fb1-ad06-d7714e25b1ba
library!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Schedule 534ad96b-a680-4630-a865-9f99e1087e3f execution completed at 12/07/2014 00:02:03.
library!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
notification!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Handling subscription 2946db38-5a07-4fb1-ad06-d7714e25b1ba to report Compliance 4 - Updates by vendor month year, owner: LEGISLATURE\mrykhoe, delivery extension: Report Server Email.
emailextension!WindowsService_37!a04!12/07/2014-00:02:06:: e ERROR: Error sending email. Exception: System.FormatException: The specified string is not in the form required for an e-mail address.
at System.Net.Mime.MailBnfHelper.ReadMailAddress(String data, Int32& offset, String& displayName)
at System.Net.Mail.MailAddress.ParseValue(String address)
at System.Net.Mail.MailAddress..ctor(String address, String displayName, Encoding displayNameEncoding)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.CreateMessage(Notification notification)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
notification!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Notification f06f40a4-32f3-4fa6-8077-89083cc7a2a2 completed. Success: True, Status: Failure sending mail: The specified string is not in the form required for an e-mail address.Mail will
not be resent., DeliveryExtension: Report Server Email, Report: Compliance 4 - Updates by vendor month year, Attempt 0

Problem Sending mails in a loop using JavaMail API

Hello All,
I am sending emails in a loop(one after the other) using JavaMail API,but the problem is, if the first two,three email addresses in the loop are Valid it sends the Email Properly, but if the Fourth or so is Invalid Address it throws an Exception....
"javax.mail.SendFailedException: Sending failed;"
nested exception is:
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 450 <[email protected]>:Recipient address rejected: Domain not found......
So if i want to send hundereds of emails and if one of the Emails inbetween is Invalid the process Stops at that point and i could not send the other emails in the Loop......
How Could i Trap the exception thrown and handle it in such a way, so that the loops continues ..
Is there something with the SMTP Server....?
The code which i am using is as follows....
<Code>...
try {
InitialContext ic = new InitialContext();
Session session = (Session) ic.lookup(JNDINames.MAIL_SESSION);
if (Debug.debuggingOn)
session.setDebug(true);
// construct the message
MimeMessage msg = new MimeMessage(session);
msg.setFrom(new InternetAddress(eMess.getEmailSender()));
String to = "";
msg.setRecipients(Message.RecipientType.TO,
InternetAddress.parse(to, false));
msg.setRecipients(Message.RecipientType.BCC,
InternetAddress.parse(eMess.getEmailReceiver(), false));
msg.setSubject(eMess.getSubject());
msg.setContent(eMess.getHtmlContents(),"text/plain");
msg.saveChanges();
Transport.send(msg);
} catch (Exception e) {
Debug.print("createAndSendMail exception : " + e);
throw new MailerAppException("Failure while sending mail");
</Code>....
Please give me any suggestions regarding it....and guide me accordingly..
Thanks a million in advance...
Regards
Sam

How about something like the code attached here. Be aware it is lifted and edited out of an app we have here so it may require changing to get it to work. If it don't work - don't come asking for help as this is only a rough example of one way of doing it. RTFM - that's how we worked it out!
SH
try {
Transport.send(msg);
// If we get to here then the mail went OK so update all the records in the email as sent
System.out.println("Email sent OK");
catch (MessagingException mex) {
System.out.println("Message error");
Exception ex = mex;
do {
if (ex instanceof SendFailedException) {
if (ex.getMessage().startsWith("Sending failed")) {
// Ignore this message as we want to know the real reason for failure
// If we get an Invalid Address error or a Message partially delivered message process the message
if (ex.getMessage().startsWith("Message partially delivered")
|| ex.getMessage().startsWith("Invalid Addresses")) {
// This message is of interest as we need to process the actual individual addresses
System.out.println(ex.getMessage().substring(0, ex.getMessage().indexOf(";")));
// Now get the addresses from the SendFailedException
SendFailedException sfex = (SendFailedException) ex;
Address[] invalid = sfex.getInvalidAddresses();
if (invalid != null) {
System.out.println("Invalid Addresse(s) found -");
if (invalid.length > 0) {
for (int x = 0; x < invalid.length; x++) {
System.out.println(invalid[x].toString().trim());
Address[] validUnsent = sfex.getValidUnsentAddresses();
if (validUnsent != null) {
System.out.println("Valid Unsent Addresses found -");
if (validUnsent.length > 0) {
for (int x = 0; x < validUnsent.length; x++) {
System.out.println(validUnsent[x].toString().trim());
Address[] validSent = sfex.getValidSentAddresses();
if (validSent != null) {
System.out.println("Valid Sent Addresses found -");
if (validSent.length > 0) {
for (int x = 0; x < validSent.length; x++) {
System.out.println(validSent[x].toString().trim());
if (ex instanceof MessagingException)
ex = ((MessagingException) ex).getNextException();
else {
// This is a general catch all and we should assume that no messages went and should stop
System.out.println(ex.toString());
throw ex;
} while (ex != null);

Sending mail failure

Similar Messages

Maybe you are looking for