Sending mail from different office locations

I can receive mail fine, using mail.mac.com, But I cannot send. I have 3 different office locations and would like to be able to use the Mail application and not just the webmail based app.
If this is not possible, I would like to at least be able to use the mail app. from home, however I am on a network at home on my roommates wireless connection. Do I need to have his user/pass entered using the smtp settings for our ISP?
Thank you very much for your help.

If you are using smtp.mac.com to send the mail, try changing its port from 25 to 587.
A lot of ISPs are now blocking port 25 for anyone not using the ISP's smtp server.

Similar Messages

Problem sending mail from different location

I cant send mail when connecting via a different server than my own network provider i.e. when connected wirelessly away from home office. Comes up with message:-
Verify that you have addressed this message correctly. Check your SMTP server settings in Mail Preferences and verify any advanced settings with your system administrator.
The server response was: <[email protected]>: Recipient address rejected: Relay access denied
You can try to send using a different server. All messages will use this server until you quit or change your network settings.
If I change the outgoing smtp setting to the network provider that I am connected to then mail will send.
Can this problem be rectified?
Kind regards

Most, if not all ISPs used for connecting to the internet now block the use of SMTP servers that are outside of their network (or not provided by the ISP) on Port 25 or what is termed "relay access" per the error message.
Some ISPs allow the use of an authenticated SMTP server only that is outside of their network on Port 25 but some block its use regardless.
These restrictions are in place as part of an overall effort to prevent spam emanating from the ISP's domain.
If the ntlworld SMTP server is not authenticated (even if authenticated there is no guarantee it will work depending on the restrictions imposed by the ISP used for connecting to the internet other than your own), you can try changing the server port from 25 to 587 but doing so is no guarantee either.
Go to Mail > Preferences > Accounts and under the Account Information tab for the ntlworld account preferences at the SMTP server selection, select the Server Settings button below.
Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
If ntlworld has an authenticated SMTP server and it doesn't work on Port 25 when connected to the internet via a different ISP or using Port 587 for the SMTP server doesn't work regardless if the SMTP server that is outside of the ISP's network is authenticated or not, your only other option is using the SMTP server provided by the ISP used for connecting to the internet.
There is no other way to rectify this problem regardless the email client used or platform - OS X or Windows.

Sending Mail from Different Hot Spots/Internet Connections

I'm trying to set up my Mac Mail to be able to send emails out from Mac Mail when I am using random Air Port connections, like at Starbucks Hot Spots and other Internet connections. I use POP3 to bring in my Yahoo Mail, but when I want to send mail back out at say a Starbucks, it doesn't work. I'm not sure how to set up my Mac Mail Preferences to enable that. Can anyone tell me how to do so? Someone set up my computer to do so in the past, but my hard drive died and I can't figure out how to do the Preferences to make it happen again.
Thanks so much for any feedback.
Andy
G4 powerbook - OS 10.3.9

Mail Help has some articles devoted to sending problems, e.g. "I can't send email" or "I can't send email because the connection to the server on port 25 timed out". You may want to take a look at them in case there is something there that applies to you. Something that usually works is changing the outgoing server port to 587 instead of 25.
You may also need to go to System Preferences > Network > Show: Network Port Configurations, and make sure that the configuration used to connect to Internet appears at the top of the list. If this is different depending on your physical location, you can set up different "locations" in System Preferences > Network, to make it easier switching between network settings.

Smtp server won't send mail from the office, works fine at home...

Ugggg... AOL!!! I can't send my emails from my Mac Mail program using my aol account from the office. This works fine from other connections. I am wireless at work and at home and elsewhere all the time and don't have a problem. I CAN'T send out using smtp.aol.com from the office, using my aol account and passord in the preferences etc. I've worked out of this office in the past and didn't have a problem but haven't been able to send out all week...
OS 10.3.7 Not Tiger, the one before (Panther?)
Help

Welcome to the Discussions.
Many ISP are blocking the use of any third party SMTP, sometimes even when presented on Port 587 (I presume you are using Port 587?) -- could it be that the ISP connecting the office, has changed policy?
Ernie

Receive & send mail from different accounts

How do I receive mail from my Gmail account and send from another account?
I have the incoming server as an IMAP and it works fine. The outgoing mail server is the problem. It's set up as a different username and everything, and it STILL sends it through my GMail account. I deleted the outgoing smtp gmail server with no success. What should I do?
Thanks!

I think it depends on your operating system.
You can test it by using java.net.Socket to create a bunch of
connections to the same host and port, close them, and then
see what your operating system shows. If you get the same
behavior there, it's an OS problem, or perhaps just the way
the OS works. You might want to check with a networking expert.

Need to send mail from Microsoft Exchange 2007 account(different from Gmail) on behalf of another Gmail ID. How to configure that ?

I have a Gmail ID (e.g [email protected])
I have a Exchange ID (e.g [email protected])
I need to configure exchange account (2007) such that I can send a mail from my Exchange account but at the receiver end it looks like it was sent from ([email protected]).
Both the accounts are my accounts.
I need this because I do not have access to my Gmail account from place where I access the internet and I need to send the mails from my Gmail account only.

So you want to spoof your e-mail address.
You can make your Exchange server send as any address you want. Just create a different mailbox with that address as the primary (reply) address. It has to be a different account.
However, be aware that many systems to which you send such mail to will bounce it as suspected spam because they'll detect that your server is sending mail from Gmail but your server is not Gmail.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Cannot send mail from any mail account

I have a Mac Mini, late 2014 model, running OS X Yosemite version 10.10.2. I have constant difficulty sending mail from any of my mail accounts; these are iCloud, Googlemail, Yahoo and a personal one which uses 123-reg.co.uk. I am currently located in Greece, but have been having trouble for ages, even in the UK. I can receive mail, but I don't seem able to send it. Error message is usually simply cannot send mail using this server, select a different server. However, when connection doctor is run, all servers appear to be connected and I am logged in. Any ideas please?

rosiehwilson wrote:
Hi, not sure why that is relevant, but we arrived at the end of January this year. Here is a screen shot of a recurring problem, although in this case Gmail is not connected to the internet, which it usually is. Hope this helps.
Your outgoing Gmail servers not working, everything else seems OK.
So, what is not working for you (other than Gmail Sending)

Send mail from SAP system to another SAP system

Hello Xperts
I need to send a mail from one SAP box (ECC) to another SAP box (SRM,CRM, EP etc). I know how to send mail from SAP to external address but unable to find the parameters in this case. Kindly help.
thkx
Prabhu
PS: Kindly DONOT post on "How to send mail from SAP" as my questions is all abt how to send mail from one sap system to another sap system

Hi
To send mail Internally check this sample code it works fine this code was developed by me
*& Report ZMATURITYREPORT *
*& Title - Maturity report *
*& ABAP/4 Consultant *
*& Name- Pavan Praveen Valluri Created on 26/07/2007 *
*& Module - FI *
REPORT ZMATURITYREPORT.
tables: bseg.
* SELECTION SCREEN--------------------------------------------------- *
parameters: p_email type somlreci1-receiver default
'@gujaratpetro.com'.
* Data: p_email(25) type c value '[email protected]'.
* END OF SELECTION SCREEN ------------------------------------------- *
*----------DATA DECLARATION--------------------------------------------*
data: it_message type standard table of solisti1 initial size 0
with header line.
data: it_message1 type standard table of solisti1 initial size 0
with header line.
data: it_message2(10) type N.
data: it_message3 type standard table of solisti1 initial size 0
with header line.
data: it_message4 type standard table of solisti1 initial size 0
with header line.
data: it_attach type standard table of solisti1 initial size 0
with header line.
data: text(150).
data: t_packing_list like sopcklsti1 occurs 0 with header line,
 t_contents like solisti1 occurs 0 with header line,
 t_receivers like somlreci1 occurs 0 with header line,
 t_attachment like solisti1 occurs 0 with header line,
 t_object_header like solisti1 occurs 0 with header line,
 w_cnt type i,
 w_sent_all(1) type c,
 w_doc_data like sodocchgi1,
 gd_error type sy-subrc,
 gd_reciever type sy-subrc.
start-of-selection.
data: lv_date type sy-datum.
data: lv_date1 type sy-datum.
data: lv_formatdate(10) type c.
data: lv_formatdate1(10) type c.
data: var1(4) type c,
var2(2) type c,
var3(2) type c.
data: begin of int_bseg occurs 0,
 BELNR LIKE BSEG-BELNR,
 ZUONR LIKE BSEG-ZUONR,
 GJAHR LIKE BSEG-GJAHR,
 DMBTR LIKE BSEG-DMBTR,
 HKONT LIKE BSEG-HKONT,
end of int_bseg.
data: begin of int_SKAT occurs 0,
 TXT50 LIKE SKAT-TXT50,
 SAKNR LIKE SKAT-SAKNR,
 KTOPL LIKE SKAT-KTOPL,
end of int_SKAT.
data: begin of int_bkpf occurs 0,
 BELNR LIKE BKPF-BELNR,
 BUKRS LIKE BKPF-BUKRS,
 GJAHR LIKE BKPF-GJAHR,
 BUDAT LIKE BKPF-BUDAT,
end of int_BKPF.
data: 2days_out type sy-datum.
2days_out = sy-datum + 2.
data: var4(4) type c,
var5(2) type c,
var6(2) type c.
*-------- END OF DATA DECLARATION--------------------------------------*
*--- CONCATENATING AND ARRANGING DATE ---------------------------------*
lv_date = 2days_out.
var1 = lv_date+(4).
var2 = lv_date+4(2).
var3 = lv_date+6(2).
concatenate var3 var2 var1 into lv_formatdate separated by '.'.
*--- END OF CONCATENATING AND ARRANGING DATE -------------------------*
*-------------------------SELECTION FOR BSEG---------------------------*
select zuonr belnr bukrs GJAHR DMBTR HKONT from bseg into
corresponding fields of table int_bseg
where bukrs = 'company name' and
 ZUONR = lv_formatdate.
*--------------END OF SSELECTION FOR BSEG--------------------------- *
*-------------------------SELECTION FOR BKPF---------------------------*
select BUDAT BUKRS BELNR GJAHR from BKPF into
corresponding fields of table int_BKPF
where bukrs = 'company name'.
append int_BKPF.
*------------------END OF SELECTION FOR BKPF---------------------------*
*-------------------------SELECTION FOR SKAT---------------------------*
select SAKNR TXT50 from SKAT into
corresponding fields of table int_SKAT
where KTOPL = 'company name'.
*and SAKNR = INT_BSEG-HKONT.
APPEND INT_SKAT.
*--------------END OF SSELECTION FOR SKAT--------------------------- *
*-----------------POPULATING EMAIL SUBJECT ----------------------------*
perform populate_email_message_body.
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Maturity after 2 days'
'XLS'
'filename'
changing gd_error
gd_reciever.
* Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*endif.
end-of-selection.
*------------END OF POPULATING EMAIL SUBJECT --------------------------*
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
* Send email
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
data: ld_error type sy-subrc,
ld_reciever type sy-subrc,
ld_mtitle like sodocchgi1-obj_descr,
ld_email like somlreci1-receiver,
ld_format type so_obj_tp ,
ld_attdescription type so_obj_nam ,
ld_attfilename type so_obj_des ,
ld_sender_address like soextreci1-receiver,
ld_sender_address_type like soextreci1-adr_typ,
ld_receiver like sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
** Fill the document data and get size of attachment
clear w_doc_data.
read table it_attach index w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + strlen( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
clear t_attachment.
refresh t_attachment.
t_attachment[] = pit_attach[].
* Describe the body of the message
clear t_packing_list.
refresh t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
append t_packing_list.
* Add the recipients email address
clear t_receivers.
refresh t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
append t_receivers.
call function 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = w_doc_data
 put_in_outbox = 'X'
 sender_address = ld_sender_address
 sender_address_type = ld_sender_address_type
 commit_work = 'X'
 IMPORTING
 sent_to_all = w_sent_all
 TABLES
 object_header = t_object_header
 packing_list = t_packing_list
 contents_bin = t_attachment
 contents_txt = it_message
 receivers = t_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 others = 8.
* Populate zerror return code
ld_error = sy-subrc.
* Populate zreceiver return code
loop at t_receivers.
 ld_receiver = t_receivers-retrn_code.
endloop.
endform. "send_file_as_email_attachment
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
* Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
 submit rsconn01 with mode = 'INT'
 with output = 'X'
 and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
* Populate message body text
form populate_email_message_body.
refresh it_message.
refresh it_message1.
refresh it_message3.
 refresh it_message4.
*--------------- LOOP FOR BSEG -----------------------------------------
loop at int_BSEG.
read table int_bKPF WITH KEY BELNR = INT_BSEG-BELNR
 GJAHR = INT_BSEG-GJAHR.
read table int_SKAT WITH KEY SAKNR = INT_BSEG-HKONT.
*---CHANGING DATE FORMAT FOR BKPF---------------------------------------
lv_date1 = int_bkpf-budat.
var4 = lv_date1+(4).
var5 = lv_date1+4(2).
var6 = lv_date1+6(2).
concatenate var6 var5 var4 into lv_formatdate1 separated by '.'.
*---END OF CHANGING DATE FORMAT FOR BKPF-------------------------
it_message = int_bseg-belnr.
it_message1 = lv_formatdate1.
it_message2 = int_bseg-dmbtr.
it_message3 = int_bseg-hkont.
IT_MESSAGE4 = INT_SKAT-TXT50.
SHIFT IT_MESSAGE2 LEFT DELETING LEADING '0'.
*-------------POPULATING EMAIL BODY WITH DATA -------------------------
concatenate 'Maturity After 2Days' 'for' 'G/L account-' it_message3
'--' IT_MESSAGE4 ',' 'Amount-' it_message2
 into it_message separated by space.
append it_message.
append it_message1.
append it_message3.
clear it_message.
clear it_message1.
clear it_message2.
clear it_message3.
endloop.
*------------END OF LOOP FOR BSEG --------------------------------------
endform. " POPULATE_EMAIL_MESSAGE_BODY

To send an mail with external attachment check this one

first create a Include report with the following coding
*& Include ZPA1_INCLFOR_MAIL *
* Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
* FORM
FORM ml_customize USING objname objdesc.
*----------- Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
*--------- Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
* FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
* FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
* FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
*--------- Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
* IMPORTING
* COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
* Header Data
* Already Done Thru FM
* Main Text
* Already Done Thru FM
* Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
* Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
* Receiver List
* Already done thru fm
ENDFORM. "ml_prepare
* FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
* CONTENTS_HEX = objhex
* OBJECT_PARA =
* object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
* FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
*-------------- Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
*------------- Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
* FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
*-------- Data
DATA : pos TYPE i.
DATA : len TYPE i.
*------------ Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv

Then include that report in the following report and copy the same code and paste it there

*& Report ZPA_TEMP147 *
REPORT ZPA_TEMP147 .
INCLUDE zpa1_inclfor_mail.
* DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
* SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
* AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
* START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
* FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
* CHECK_DOS_FORMAT =
IMPORTING
* DRIVE =
EXTENSION = extension
NAME = name
* NAME_WITH_EXT =
* PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
SAPoffice: Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
SAPoffice: Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
SAPoffice: Send new document
Check this sample report
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
* Receivers
receiver_list-recextnam = '[email protected]'. "-->
* EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
* General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
* Mail subject
w_object_hd_change-objdes = 'Message subject'.
* Mail body
APPEND 'Message content' TO message_content.
* Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.
Settings for sending mail
Configuring SAP 4.6x Internet mail Gateway
SAP can be configured to send and receive emails from different sources.This section explains how to integrate SAPOffice with an external emailsystem. Your Internet email must be configured and running prior to this.Email from SAP is forwarded to the users external email system..
You can configure inbound and outbound forwarding. Outbound flow forwardsa SAP message (eg: update termination) via UNIX sendmail to the intended recepient. Inbound accepts a message from sendmail and places it in the users SAPOffice inbox. Many companies prefer to configure outbound only.
Configuring outbound forwarding
SAP configuration
1. Create your RFC destination for outbound email using transaction SM59
RFC Destination : SAP_INTERNET_GATEWAY
Connection Type : T
Description : SAP internet mail gateway
Click on 'Explicit Host' if you wanton demand gateway dameon invocation.
Program : /sapmnt/SID/exe/mlunxsnd
Target Host : Enter hostname that runs your central instance.
Click 'Test Connection' and you should seea successfull message.
2. Shared Office Settings transaction SO16-> Send -> Settings or
directly via transaction SCOT- SAPconnect Administation
Nodes - Create
Node : IMAIL
Description : SAP internet mail gateway
RFC Destination : SAP_INTERNET_GATEWAY
Tick : Internet
Address Area : *
Tick : All formats
Dev. type : Choose an approciate Printer Device
Set further addresstype : N
Maximum waiting timefor repeat send attempt procedure : Blank or decide for yourself
Tick : Node is ready for use
Setting
- DefaultDomain : <your company domain>.com
- Conversionrule : require if your communication device only support one format.
e.g. if you email system only support the format RAW (ASCII text format)
Format To Format Ranking Function module
ALI RAW 1 SX_OBJECT_CONVERT_ALI_RAW (convert APAP List)
Referto note 171698 - SAPconnect: Formats, conversion, device type
UNIX configuration
1 .. cd /sapmnt/SID/exe
2 ..csh
..mlsomadm mailgw.ini
System Name [C11] :
Client [000] :
Username : MAILADM
Password : MAILADM
Language : E
Load Balancing :
Hostname : <hostname>
System number : <instance_number>
Gateway hostname: <central_instance_hostname>
Gateway Service : <instance number>
Use SAP Router :
Trace level :
Sendmail Command [/usr/lib/sendmail -i -f<SENDER_ADDRESS>]:
Codepage [ISO-8859-1] :
Trace Level (Outbound) [0] :
Update file sapmailsid.cfg? [Y]
Testing whether your configuration is successful
1. Logon to SAP
2. Execute transaction SO01
3. Write a message and send it to <your_internet_email_address>
4. If you don't see the mail in your internet mailbox, go back and review steps 1-12
Schedule the SAP Internet Mail Gateway Jobs to start every 5 minutes
1. Create
2. Position your cursor at INT
3. Click Schedule and supply the date and time
4. Click Schedule periodically and tick Minutes and type in 5
5. Click Create and you are done
6. Click Show Scheduling to check
Problems that you might encounter :-
If you have set up a node in SCOT and it tests out well but recieve the reply.
"Cannot process message in node, parameterscannot be converted".
Make sure the RFC connection is working, and that SapConnect has been installed on the Unix Server or the Microsoft Exchange Server. Originally, I had the same error, and found that nothing had been installed on Unixor Exchange, to support SapConnect.
In SCOT (View -> System Status), your mail remains at the Intransit column.
Check you sendmail.cf files (e.g.Sun Solaris /etc/mail/sendmail.cf). Try using the sendmail command to send a test file at the Unix level. You must be able to send mail at theUnix level before you can send mail at the SAP level.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/700b405bacdd5fe10000000a155106/content.htm
http://www.tamboly.com/SAPEmailConfiguration.html
Check my previous links
Mail Send
sending mails from abap program
Mail Sending to external email id's
settings needed for sending emails
Regards
Pavan

Sending mail from one sap box to other sap box

how to send mail from one sap box to other sap box?

Hi Pavan,
To send mail Internally check this sample code.
*& Report ZMATURITYREPORT *
*& Title - Maturity report *
*& Module - FI *
REPORT ZMATURITYREPORT.
tables: bseg.
SELECTION SCREEN--------------------------------------------------- *
parameters: p_email type somlreci1-receiver default
'<email_removed_by_moderator>.
Data: p_email(25) type c value <hardcoding_removed_by_moderator>.
END OF SELECTION SCREEN ------------------------------------------- *
--DATA DECLARATION--
data: it_message type standard table of solisti1 initial size 0
with header line.
data: it_message1 type standard table of solisti1 initial size 0
with header line.
data: it_message2(10) type N.
data: it_message3 type standard table of solisti1 initial size 0
with header line.
data: it_message4 type standard table of solisti1 initial size 0
with header line.
data: it_attach type standard table of solisti1 initial size 0
with header line.
data: text(150).
data: t_packing_list like sopcklsti1 occurs 0 with header line,
 t_contents like solisti1 occurs 0 with header line,
 t_receivers like somlreci1 occurs 0 with header line,
 t_attachment like solisti1 occurs 0 with header line,
 t_object_header like solisti1 occurs 0 with header line,
 w_cnt type i,
 w_sent_all(1) type c,
 w_doc_data like sodocchgi1,
 gd_error type sy-subrc,
 gd_reciever type sy-subrc.
start-of-selection.
data: lv_date type sy-datum.
data: lv_date1 type sy-datum.
data: lv_formatdate(10) type c.
data: lv_formatdate1(10) type c.
data: var1(4) type c,
var2(2) type c,
var3(2) type c.
data: begin of int_bseg occurs 0,
 BELNR LIKE BSEG-BELNR,
 ZUONR LIKE BSEG-ZUONR,
 GJAHR LIKE BSEG-GJAHR,
 DMBTR LIKE BSEG-DMBTR,
 HKONT LIKE BSEG-HKONT,
end of int_bseg.
data: begin of int_SKAT occurs 0,
 TXT50 LIKE SKAT-TXT50,
 SAKNR LIKE SKAT-SAKNR,
 KTOPL LIKE SKAT-KTOPL,
end of int_SKAT.
data: begin of int_bkpf occurs 0,
 BELNR LIKE BKPF-BELNR,
 BUKRS LIKE BKPF-BUKRS,
 GJAHR LIKE BKPF-GJAHR,
 BUDAT LIKE BKPF-BUDAT,
end of int_BKPF.
data: 2days_out type sy-datum.
2days_out = sy-datum + 2.
data: var4(4) type c,
var5(2) type c,
var6(2) type c.
-- END OF DATA DECLARATION--
--- CONCATENATING AND ARRANGING DATE -
lv_date = 2days_out.
var1 = lv_date+(4).
var2 = lv_date+4(2).
var3 = lv_date+6(2).
concatenate var3 var2 var1 into lv_formatdate separated by '.'.
--- END OF CONCATENATING AND ARRANGING DATE -
--SELECTION FOR BSEG--
select zuonr belnr bukrs GJAHR DMBTR HKONT from bseg into
corresponding fields of table int_bseg
where bukrs = 'company name' and
 ZUONR = lv_formatdate.
*--END OF SSELECTION FOR BSEG--
--SELECTION FOR BKPF--
select BUDAT BUKRS BELNR GJAHR from BKPF into
corresponding fields of table int_BKPF
where bukrs = 'company name'.
append int_BKPF.
--END OF SELECTION FOR BKPF--
--SELECTION FOR SKAT--
select SAKNR TXT50 from SKAT into
corresponding fields of table int_SKAT
where KTOPL = 'company name'.
*and SAKNR = INT_BSEG-HKONT.
APPEND INT_SKAT.
*--END OF SSELECTION FOR SKAT--
----POPULATING EMAIL SUBJECT -
perform populate_email_message_body.
perform send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Maturity after 2 days'
'XLS'
'filename'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*endif.
end-of-selection.
----END OF POPULATING EMAIL SUBJECT -
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
form send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
data: ld_error type sy-subrc,
ld_reciever type sy-subrc,
ld_mtitle like sodocchgi1-obj_descr,
ld_email like somlreci1-receiver,
ld_format type so_obj_tp ,
ld_attdescription type so_obj_nam ,
ld_attfilename type so_obj_des ,
ld_sender_address like soextreci1-receiver,
ld_sender_address_type like soextreci1-adr_typ,
ld_receiver like sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
clear w_doc_data.
read table it_attach index w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + strlen( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
clear t_attachment.
refresh t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
clear t_packing_list.
refresh t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
describe table it_message lines t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
append t_packing_list.
Add the recipients email address
clear t_receivers.
refresh t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
append t_receivers.
call function 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = w_doc_data
 put_in_outbox = 'X'
 sender_address = ld_sender_address
 sender_address_type = ld_sender_address_type
 commit_work = 'X'
 IMPORTING
 sent_to_all = w_sent_all
 TABLES
 object_header = t_object_header
 packing_list = t_packing_list
 contents_bin = t_attachment
 contents_txt = it_message
 receivers = t_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 others = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
loop at t_receivers.
 ld_receiver = t_receivers-retrn_code.
endloop.
endform. "send_file_as_email_attachment
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
 submit rsconn01 with mode = 'INT'
 with output = 'X'
 and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
refresh it_message.
refresh it_message1.
refresh it_message3.
 refresh it_message4.
LOOP FOR BSEG -
loop at int_BSEG.
read table int_bKPF WITH KEY BELNR = INT_BSEG-BELNR
 GJAHR = INT_BSEG-GJAHR.
read table int_SKAT WITH KEY SAKNR = INT_BSEG-HKONT.
*-CHANGING DATE FORMAT FOR BKPF--
lv_date1 = int_bkpf-budat.
var4 = lv_date1+(4).
var5 = lv_date1+4(2).
var6 = lv_date1+6(2).
concatenate var6 var5 var4 into lv_formatdate1 separated by '.'.
*-END OF CHANGING DATE FORMAT FOR BKPF--
it_message = int_bseg-belnr.
it_message1 = lv_formatdate1.
it_message2 = int_bseg-dmbtr.
it_message3 = int_bseg-hkont.
IT_MESSAGE4 = INT_SKAT-TXT50.
SHIFT IT_MESSAGE2 LEFT DELETING LEADING '0'.
POPULATING EMAIL BODY WITH DATA -
concatenate 'Maturity After 2Days' 'for' 'G/L account-' it_message3
'--' IT_MESSAGE4 ',' 'Amount-' it_message2
 into it_message separated by space.
append it_message.
append it_message1.
append it_message3.
clear it_message.
clear it_message1.
clear it_message2.
clear it_message3.
endloop.
END OF LOOP FOR BSEG -
endform. " POPULATE_EMAIL_MESSAGE_BODY
To send an mail with external attachment check this one
first create a Include report with the following coding
*& Include ZPA1_INCLFOR_MAIL *
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
Then include that report in the following report and copy the same code and paste it there
*& Report ZPA_TEMP147 *
REPORT ZPA_TEMP147 .
INCLUDE zpa1_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
SAPoffice: Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
SAPoffice: Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
SAPoffice: Send new document
Check this sample report
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
Receivers
receiver_list-recextnam = '[email protected]'. "-->
EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
Mail subject
w_object_hd_change-objdes = 'Message subject'.
Mail body
APPEND 'Message content' TO message_content.
Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.
Settings for sending mail
Configuring SAP 4.6x Internet mail Gateway
SAP can be configured to send and receive emails from different sources.This section explains how to integrate SAPOffice with an external emailsystem. Your Internet email must be configured and running prior to this.Email from SAP is forwarded to the users external email system..
You can configure inbound and outbound forwarding. Outbound flow forwardsa SAP message (eg: update termination) via UNIX sendmail to the intended recepient. Inbound accepts a message from sendmail and places it in the users SAPOffice inbox. Many companies prefer to configure outbound only.
Configuring outbound forwarding
SAP configuration
1. Create your RFC destination for outbound email using transaction SM59
RFC Destination : SAP_INTERNET_GATEWAY
Connection Type : T
Description : SAP internet mail gateway
Click on 'Explicit Host' if you wanton demand gateway dameon invocation.
Program : /sapmnt/SID/exe/mlunxsnd
Target Host : Enter hostname that runs your central instance.
Click 'Test Connection' and you should seea successfull message.
2. Shared Office Settings transaction SO16-> Send -> Settings or
directly via transaction SCOT- SAPconnect Administation
Nodes - Create
Node : IMAIL
Description : SAP internet mail gateway
RFC Destination : SAP_INTERNET_GATEWAY
Tick : Internet
Address Area : *
Tick : All formats
Dev. type : Choose an approciate Printer Device
Set further addresstype : N
Maximum waiting timefor repeat send attempt procedure : Blank or decide for yourself
Tick : Node is ready for use
Setting
- DefaultDomain : <your company domain>.com
- Conversionrule : require if your communication device only support one format.
e.g. if you email system only support the format RAW (ASCII text format)
Format To Format Ranking Function module
ALI RAW 1 SX_OBJECT_CONVERT_ALI_RAW (convert APAP List)
Referto note 171698 - SAPconnect: Formats, conversion, device type
UNIX configuration
1 .. cd /sapmnt/SID/exe
2 ..csh
..mlsomadm mailgw.ini
System Name [C11] :
Client [000] :
Username : MAILADM
Password : MAILADM
Language : E
Load Balancing :
Hostname : <hostname>
System number : <instance_number>
Gateway hostname: <central_instance_hostname>
Gateway Service : <instance number>
Use SAP Router :
Trace level :
Sendmail Command [/usr/lib/sendmail -i -f<SENDER_ADDRESS>]:
Codepage [ISO-8859-1] :
Trace Level (Outbound) [0] :
Update file sapmailsid.cfg? [Y]
Testing whether your configuration is successful
1. Logon to SAP
2. Execute transaction SO01
3. Write a message and send it to <your_internet_email_address>
4. If you don't see the mail in your internet mailbox, go back and review steps 1-12
Schedule the SAP Internet Mail Gateway Jobs to start every 5 minutes
1. Create
2. Position your cursor at INT
3. Click Schedule and supply the date and time
4. Click Schedule periodically and tick Minutes and type in 5
5. Click Create and you are done
6. Click Show Scheduling to check
Problems that you might encounter :-
If you have set up a node in SCOT and it tests out well but recieve the reply.
"Cannot process message in node, parameterscannot be converted".
Make sure the RFC connection is working, and that SapConnect has been installed on the Unix Server or the Microsoft Exchange Server. Originally, I had the same error, and found that nothing had been installed on Unixor Exchange, to support SapConnect.
In SCOT (View -> System Status), your mail remains at the Intransit column.
Check you sendmail.cf files (e.g.Sun Solaris /etc/mail/sendmail.cf). Try using the sendmail command to send a test file at the Unix level. You must be able to send mail at theUnix level before you can send mail at the SAP level.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/700b405bacdd5fe10000000a155106/content.htm
http://www.tamboly.com/SAPEmailConfiguration.html
Check my previous links
Mail Send
sending mails from abap program
Mail Sending to external email id's
settings needed for sending emails
<points_request_removed_by_moderator>
Cheers,
CHAITANYA.

How do I specify the gmail outgoing server if I have multiple gmail accounts in my mail? I have 2 business accounts and when I send mail from one account, it is sent from the other account and the sending email is not from the correct account.

I love my apple email and do not want to use google mail on safari. However, I have 2 gmail accounts set up on apple mail, but when I send mail from one of my gmail accounts (I choose the specific gmail account in the drop down window), it actually goes out as if it is from the other gmail account. I can't have that happen because one is my job, the other is a personal business account and unfortunately, the mail from both gmail accounts want to send through the personal business account. How do I make it send from a specific gmail account? I even tried deleting the accounts and setting them up again hoping I set it up wrong in the first place, but to no avail, it is still doing the same thing except this time I set the job account up first and then the personal business account and now everything goes from the job account! The only good thing is that the incoming messages work properly and they go into the correct inbox. Somebody please fix my outbox!

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

Sending Mail from workflow or updating container elements

Dear friends,
I'm new to work flow.
My requirement: send mail from workflow to a user after dead line is missed I do not want to use messages in 'Latest end' tab. I want to send mail.
The mail id of the user is determined in the previous step using a FM. How do I use this mail id to send the mail. I thought of using 'Rule' option in 'Send Mail' (and use same FM)but thats not possible. In that case how do I pass the mail id value to the WF container from the FM?
I also tried this idea:
created a task with BOR object SELFITEM, method 'SENDTASKDESCRIPTION' .
*in an activity step used this task and filled the 'Rule' option in notification tab appropriately
*in this case the WF goes into an error '.....error executing 'sendtaskdescription' .....'
*i would prefer using the activity step because, the mail has to be sent after a delay
Is there any other simple method to do this?
My problem would be solved even if someone can show me how to transfer values from a FM into a WF container.
Can someone please explain?

Reposted under different thread

Problem in sending mail from database with attachment

Hi All,
I amd using forms10g,oracle10g
I am facing a error while running a procedure to send mail from db
procedure is:
declare
ErrorMessage VARCHAR2(4000);
ErrorStatus NUMBER;
-- enable SQL*PLUS output;
--SET SERVEROUTPUT ON
-- redirect java output into SQL*PLUS buffer;
--exec dbms_java.set_output(5000);
BEGIN
ErrorStatus := SendMailJPkg.SendMail(
SMTPServerName => '192.168.4.2',
Sender => '[email protected]',
Recipient => '[email protected]',
CcRecipient => '',
BccRecipient => '',
Subject => 'hth106: Test JavaMail',
Body => 'This is the body: Hello, this is a test that spans 2 lines',
AuthReqdYNNum => 1,
UserID => 'jagan',
Password => 'songbirds',
ErrorMessage => ErrorMessage,
Attachments => SendMailJPkg.ATTACHMENTS_LIST('C:\oramail\MHTHSO_GEN45.html')
END;
while running this procedure i am receiving following error
"ORA-29532: Java call terminated by uncaught Java exception:
java.lang.IncompatibleClassChangeError"
but the same procedure sending mail from all other user in the same database
I am very myuch confused.i have given the all rights
below mentioned rights are given .it is working in all other user on the same db except this user "hth106". And all the othere things are compared between working user and this hth106 user every things are same.But i am receiving error when i sending mail with attachment if the mail is sending without attachement it is working fine
below rights are given to this user
1.exec dbms_java.grant_permission('HTH106','java.util.PropertyPermission','*','read');
2.exec dbms_java.grant_permission('HTH106','java.util.PropertyPermission','*','write');
3.exec dbms_java.grant_permission('HTH106','java.net.SocketPermission','*','connect');
4.exec dbms_java.grant_permission('HTH106','java.net.SocketPermission','*','resolve');
5.exec dbms_java.grant_permission('HTH106','java.io.FilePermission','C:\oramail\*','read');
exec dbms_java.grant_permission('HTH106','java.io.FilePermission','C:\oramail\*','write');
6.call dbms_java.grant_permission('HTH106','java.net.SocketPermission','HTHDS01','resolve');
7.call dbms_java.grant_permission('HTH106','java.util.PropertyPermission','*','read,write');
7.call dbms_java.grant_permission('HTH106', 'java.io.FilePermission','C:\oramail\*','read');
please advise me to proceed further
Thanks in advance
Thanks ,
Antony

With respects to the following:
The bit you'll have most diffulty with is the attachment, because you can't be sure that
the directory path specified is one that the database can read from. You can probably
resolve this by using some java to move the file to a directory which utl_file can see.Another alternative is to specify a location on then database server where all file attachments MUST be copied to and the define and Oracle DIRECTORY (CREATE OR REPLACE DIRECTORY [dir_name] AS '/dir/name/on/files/system';) that references this location. When you attach a file to an email, then you only have to refer to the DIRECTORY for the file location.
Just my 2 cents on the topic. :-)
Craig...

How can i send mails from mac mail to a PC?

When i send mails from my mac to a Pc (outlook) the mail arrive with a different format or including the mail as an atached document.
How can i send mails from mac mail to a PC outlook with the same format?

send it in "windows friendly format" when you click the paper clip for an attachment.

Sending Mail from Alias

I have two alias emails that I use for our web page, as well as for alternate email addy. When I try to send mail from the alias addresses in the Mail app I get the "cannot send using the server smtp.mac.com. The server response was: 5.7.0 From address is not one of your addresses Use the pop up menu below...". I have to select a different SMTP server and .mac server does not show on the listing but rather the other email servers (i.e. google/cox etc)
I have removed accounts, deleted servers, re-created cache etc for the Mail application, and even did a test of the address which worked fine once before.
My goal is to send announcements to family from the one alias so I know it was in response to the web page announcements etc. I wish to keep my primary as private as possible.
Thanks!

Hopefully I can answer your questions:
1) Alias(s) were created on Mobile Me on my account. From the Mail application I wish to "send" from the Alias(s) rather than my main email address i.e. - main email is [email protected], I created [email protected] via Mobile Me as an alias, in Mail application it allows you to select the "account" from which to send from. If I select the alias, I get the error message.
2) They are alias(s) that are part of my main email address for .mac. So I believe the are valid, unless I miss-understand the use of an alias and it is only for receiving mail.
3) Not sure, I think they would use the .mac SMTP server (?)

Will not send mail from new account

(I don't see a category for "mail" program on the discussions.)
I have a new account, but cannot get it to send mail from it. I get the message to try a different server, but no server works.
Thanks

Hi Mimi,
I reported your topic to have it moved to the Mac OS X v10.3 & earlier > Mail & Address Book forum.
It should be moved shortly.
In the meantime, it would help if you could post back with which OS version you are using (ie. OSX 10.3.9 ?) and who your ISP is (Internet Service Provider).
littleshoulders

Sending mail from different office locations

Similar Messages

Maybe you are looking for