Sending mail = long delays in send folder

Not sure if anyone else is having this issue. It may have something to do with me.com... Ever since I activated it my out going email sits in the send folder for over a minute processing to send. I never had this issue before. Generally it would take 5 seconds. Have I done something wrong? Is there a setting somewhere that I missed? Any help Appreciated.
Jose

I have the same problem. All e-mails sit in the sent folder with the spinning wheel for up to 60 seconds. Previously it would be a few seconds. In general the Snow Leopard has been a very BIG disappointment. First the e-mails could not be sent. After a phone call to support this was fixed by resetting the port to 25, my parallels stopped working even though the spec’s say Parallels 3.0 would work, had to spend US$40 on a Parallels upgrade to work with SN, now the e-mails hang in “send”, oh and also it takes ages to now go to sleep.
The whole thing is rubbish. I have been using Apple now for 2 years. The best thing I ever did was move from a PC. I have been so impressed with everything Apple up until now. Looking at all the posts I am sure that it isn’t just me that thinks this.
I think Apple need to urgently accept the problems and develop something to sort them out. Oh and then apologise for wasting our money and time.

Similar Messages

Long delay when sending non-btinternet mail

We are using Outlook Express/Windows mail client, and there is a long long delay when sending mail.
It just hangs saying "Connecting..." in the status bar. Receiving email has no problems.
Eventually it sometimes works or sometimes just times out.
The smtp server is not btinternet/yahoo but our own email server, which we have been using for 10 years. There is no problem pinging the smtp server. e.g. smtp.ourserver.net
It works without delays on other (non BT) home/business networks.
We have tried plugging other laptops into this home network and trying to send email (to the same mail server) - same problem.
It therefore seems to be peculiar to a BT Hub or BT as the ISP.
The problem seems to have first appeared when an upgrade was made to cater for future fibre optic services.
Any help would be greatly appreciated.

Today I started from my Firewire-device with 10.4.11 and had ichat running from there. I chatted with my friend, who is on 10.5.1 - no problems at all. (so my router is not causing the problem, as I thought)
Starting from 10.5.1 again I opened up Activity Monitor and found this message every 10 secs !
25.12.07 25.12. 15:18:29 com.apple.launchd[138] (at.obdev.LittleSnitchUIAgent[654]) Exited with exit code: 1
25.12.07 25.12. 15:18:29 com.apple.launchd[138] (at.obdev.LittleSnitchUIAgent) Throttling respawn: Will start in 10 seconds
25.12.07 25.12. 15:18:39 com.apple.launchd[138] (at.obdev.LittleSnitchUIAgent[655]) posix_spawnp("/Library/Little Snitch/Little Snitch UIAgent.app/Contents/MacOS/Little Snitch UIAgent", ...): No such file or directory
I remember that I installed Little snitch some time ago and removed it manually. Then today I run the official uninstaller for it. Still I cannot get rid of this activity. May be it has to do something with the text delay in ichat? How to delete all Little Snitch processes? How can someone find these data?
Thanks for Feedback

Long delay between send button and actual send in mail

When sending messages in mail, there is a long delay between the time I hit the send button and the actual sending begins. Message and attachment size have no bearing. The delay is usually about 30 seconds, but sometimes longer.

There was info in the detail window when I opened it. Also, it was not immediately connecting to the server, but when I clicked back on the regular mail window to send a test message, the server connected instantly. Below is all that was in the details window:
CONNECTED Jan 19 11:45:53.387 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x1032788a0
READ Jan 19 11:45:53.601 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x1032788a0
* OK [CAPABILITY st11p00mm-iscream023 1M XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 SASL-IR AUTH=ATOKEN AUTH=PLAIN] iSCREAM ready to rumble (1M:12460) st11p00mm-iscream023
WROTE Jan 19 11:45:53.756 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46d52ec20
1.39 AUTHENTICATE ATOKEN MTY2MDIwMDk3ADE2NjAyMDA5NwBBUUFBQUFCUSt2ZmVHNVNBMGNLbDBsRElwQkdkc0hXNk9mdnFNVWM 9
READ Jan 19 11:45:53.844 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46d52ec20
1.39 OK [CAPABILITY XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY UNSELECT SORT CATENATE URLAUTH LANGUAGE ESEARCH ESORT THREAD=ORDEREDSUBJECT THREAD=REFERENCES CONDSTORE ENABLE CONTEXT=SEARCH CONTEXT=SORT WITHIN SASL-IR SEARCHRES XSENDER X-NETSCAPE XSERVERINFO X-SUN-SORT ANNOTATE-EXPERIMENT-1 X-UNAUTHENTICATE X-SUN-IMAP X-ANNOTATEMORE XUM1 ID IDLE] User jfbohn1 logged in
WROTE Jan 19 11:45:53.857 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46bd56e40
2.39 ID ("name" "Mac OS X Mail" "version" "5.3 (1283)" "os" "Mac OS X" "os-version" "10.7.5 (11G63)" "vendor" "Apple Inc.")
READ Jan 19 11:45:53.925 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46bd56e40
* ID NIL
2.39 OK Completed
WROTE Jan 19 11:45:53.929 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46be61a30
3.39 LIST "" ""
READ Jan 19 11:45:53.996 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46be61a30
* LIST (\Noselect) "/" ""
3.39 OK Completed
WROTE Jan 19 11:45:54.002 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46ed49310 -- thread:0x7fc46bd56e40
4.39 LOGOUT
CONNECTED Jan 19 12:33:43.623 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46edb9cd0
READ Jan 19 12:33:43.837 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46edb9cd0
* OK [CAPABILITY st11p00mm-iscream029 1M XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 SASL-IR AUTH=ATOKEN AUTH=PLAIN] iSCREAM ready to rumble (1M:4364) st11p00mm-iscream029
WROTE Jan 19 12:33:43.995 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46ea98e90
1.43 AUTHENTICATE ATOKEN MTY2MDIwMDk3ADE2NjAyMDA5NwBBUUFBQUFCUSt2ZmVHNVNBMGNLbDBsRElwQkdkc0hXNk9mdnFNVWM 9
READ Jan 19 12:33:44.088 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46ea98e90
1.43 OK [CAPABILITY XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY UNSELECT SORT CATENATE URLAUTH LANGUAGE ESEARCH ESORT THREAD=ORDEREDSUBJECT THREAD=REFERENCES CONDSTORE ENABLE CONTEXT=SEARCH CONTEXT=SORT WITHIN SASL-IR SEARCHRES XSENDER X-NETSCAPE XSERVERINFO X-SUN-SORT ANNOTATE-EXPERIMENT-1 X-UNAUTHENTICATE X-SUN-IMAP X-ANNOTATEMORE XUM1 ID IDLE] User jfbohn1 logged in
WROTE Jan 19 12:33:44.093 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46d229320
2.43 ID ("name" "Mac OS X Mail" "version" "5.3 (1283)" "os" "Mac OS X" "os-version" "10.7.5 (11G63)" "vendor" "Apple Inc.")
READ Jan 19 12:33:44.162 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46d229320
* ID NIL
2.43 OK Completed
WROTE Jan 19 12:33:44.167 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46d229320
3.43 LIST "" ""
READ Jan 19 12:33:44.235 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46d229320
* LIST (\Noselect) "/" ""
3.43 OK Completed
WROTE Jan 19 12:33:44.241 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46d262650 -- thread:0x7fc46ea98e90
4.43 LOGOUT
CONNECTED Jan 19 12:34:12.742 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46d2e4d20
READ Jan 19 12:34:12.957 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46d2e4d20
* OK [CAPABILITY st11p00mm-iscream020 1M XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 SASL-IR AUTH=ATOKEN AUTH=PLAIN] iSCREAM ready to rumble (1M:32403) st11p00mm-iscream020
WROTE Jan 19 12:34:13.116 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46edc5c40
1.44 AUTHENTICATE ATOKEN MTY2MDIwMDk3ADE2NjAyMDA5NwBBUUFBQUFCUSt2ZmVHNVNBMGNLbDBsRElwQkdkc0hXNk9mdnFNVWM 9
READ Jan 19 12:34:13.204 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46edc5c40
1.44 OK [CAPABILITY XAPPLEPUSHSERVICE IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY UNSELECT SORT CATENATE URLAUTH LANGUAGE ESEARCH ESORT THREAD=ORDEREDSUBJECT THREAD=REFERENCES CONDSTORE ENABLE CONTEXT=SEARCH CONTEXT=SORT WITHIN SASL-IR SEARCHRES XSENDER X-NETSCAPE XSERVERINFO X-SUN-SORT ANNOTATE-EXPERIMENT-1 X-UNAUTHENTICATE X-SUN-IMAP X-ANNOTATEMORE XUM1 ID IDLE] User jfbohn1 logged in
WROTE Jan 19 12:34:13.211 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46d56a3d0
2.44 ID ("name" "Mac OS X Mail" "version" "5.3 (1283)" "os" "Mac OS X" "os-version" "10.7.5 (11G63)" "vendor" "Apple Inc.")
READ Jan 19 12:34:13.280 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46d56a3d0
* ID NIL
2.44 OK Completed
WROTE Jan 19 12:34:13.287 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46ed7ba30
3.44 LIST "" ""
READ Jan 19 12:34:13.355 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46ed7ba30
* LIST (\Noselect) "/" ""
3.44 OK Completed
WROTE Jan 19 12:34:13.363 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:p02-imap.mail.me.com -- port:993 -- socket:0x7fc46edb7cf0 -- thread:0x7fc46d56a3d0
4.44 LOGOUT
CONNECTED Jan 19 12:34:58.696 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
READ Jan 19 12:34:58.763 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
220 st11p02mm-asmtp003.mac.com -- Server ESMTP (Oracle Communications Messaging Server 7u4-24.01(7.0.4.24.0) 64bit (built Jan 3 2012))
WROTE Jan 19 12:35:28.779 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
EHLO [192.168.1.30]
READ Jan 19 12:35:28.846 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250-st11p02mm-asmtp003.mac.com
250-8BITMIME
250-PIPELINING
250-CHUNKING
250-DSN
250-ENHANCEDSTATUSCODES
250-EXPN
250-HELP
250-XADR
250-XSTA
250-XCIR
250-XGEN
250-XLOOP 9DDFE32F5FFD44C1C6F842687D47D955
250-STARTTLS
250-NO-SOLICITING
250 SIZE 0
WROTE Jan 19 12:35:28.851 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
STARTTLS
READ Jan 19 12:35:28.917 [kCFStreamSocketSecurityLevelNone] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
220 2.5.0 Go ahead with TLS negotiation.
WROTE Jan 19 12:35:29.288 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
EHLO [192.168.1.30]
READ Jan 19 12:35:29.355 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250-st11p02mm-asmtp003.mac.com
250-8BITMIME
250-PIPELINING
250-CHUNKING
250-DSN
250-ENHANCEDSTATUSCODES
250-EXPN
250-HELP
250-XADR
250-XSTA
250-XCIR
250-XGEN
250-XLOOP 9DDFE32F5FFD44C1C6F842687D47D955
250-AUTH PLAIN LOGIN ATOKEN WSTOKEN WETOKEN
250-AUTH=LOGIN PLAIN
250-NO-SOLICITING
250 SIZE 0
WROTE Jan 19 12:35:29.363 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
EHLO [192.168.1.30]
READ Jan 19 12:35:29.429 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250-st11p02mm-asmtp003.mac.com
250-8BITMIME
250-PIPELINING
250-CHUNKING
250-DSN
250-ENHANCEDSTATUSCODES
250-EXPN
250-HELP
250-XADR
250-XSTA
250-XCIR
250-XGEN
250-XLOOP 9DDFE32F5FFD44C1C6F842687D47D955
250-AUTH PLAIN LOGIN ATOKEN WSTOKEN WETOKEN
250-AUTH=LOGIN PLAIN
250-NO-SOLICITING
250 SIZE 0
WROTE Jan 19 12:35:29.539 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
AUTH ATOKEN MTY2MDIwMDk3ADE2NjAyMDA5NwBBUUFBQUFCUSt2ZmVHNVNBMGNLbDBsRElwQkdkc0hXNk9mdnFNVWM 9
READ Jan 19 12:35:29.618 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
235 2.7.0 ATOKEN authentication successful.
WROTE Jan 19 12:35:29.628 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
MAIL FROM:<****>
READ Jan 19 12:35:29.700 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250 2.5.0 Address Ok.
WROTE Jan 19 12:35:29.708 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
RCPT TO:<****>
READ Jan 19 12:35:29.912 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250 2.1.5 **** OK.
WROTE Jan 19 12:35:29.921 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
DATA
READ Jan 19 12:35:29.986 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
354 Enter mail, end with a single ".".
WROTE Jan 19 12:35:29.995 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
From: John Bohn <****>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Subject: test server
Date: Sat, 19 Jan 2013 12:34:58 -0800
Message-Id: <****>
To: John Bohn <****>
Mime-Version: 1.0 (Apple Message framework v1283)
X-Mailer: Apple Mail (2.1283)
asdfs
READ Jan 19 12:35:30.197 [kCFStreamSocketSecurityLevelTLSv1SSLv3] -- host:p02-smtp.mail.me.com -- port:587 -- socket:0x7fc46d2c7f80 -- thread:0x7fc470567950
250 2.5.0 Ok, envelope id ****
<Email Edited By Host>

Sometimes Mail is slow emptying trash folder or sending emails with attachments

This happens occasionally- but enough to be an annoyance!
I am about to send an email using Mail to an address, and I wait very patiently while the Mail program makes a copy, communicates with server, then finally sends the email. Sometimes, to send an email with a simple attachment, this can take as long as three to four minutes!
Another related problem is Emptying the Trash folder.
Sometimes it takes an inordinate amount of time to do this, and other times such "deletion" takes mere few seconds.
I wonder what it is I'm doing wrong.

''jbugler [[#question-1058767|said]]''
<blockquote>
Hi
The context of this question is:
* I've had an Apple iMac for just over 3 years;
* and I've been using their 'Mail' application to send/receive emails;
* but not infrequently, when I send an email with one or more attachments all of the email doesn't get to the recipient;
* and after working with Apple and getting nowhere;
* I'm now using Thunderbird instead of Mail.
I like Thunderbird, but I've noticed that if I send an email with an attachment (an example is an email I've just sent with a 2.6MB attachment), it takes a while to both (a) first send and then (b) copy the email to my 'send' folder.
Are there any 'settings' changes I can make to speed things up, or do I just need a bigger machine? (I've noticed that over the 3+ years I've had the iMac, it's got progressively slower and slower.)
Regards
John Bugler
</blockquote>
Many thanks

HT5767 I accidentally deleted my entire "Send" folder on mail. Don't remember doing this, but it is gone. Any way to recover?

I accidentally deleted my entire "Send" folder on mail. Don't remember doing this, but it is gone. Any way to recover?

Have you changed the options for Mail Box behaviour in the Mail prefereces? If the option "Store sent mail on server" is disabled, you will not see a "Sent" mailbox. Enable it again, if it is no longer checked. This has to be set for each account in the "Accounts" tab of the Mail Preferences panel.

Long delay when sending normal text message

Whenever I send a standard message, there is always a long delay (8 secs) before it sends. I know it is not aol because it is all the time. I am running 10.5.1 on my macbook with iChat 4. I have tried reinstalling ichat including removing all pref files. Still no luck. Any help would be great! Thanks.

Today I started from my Firewire-device with 10.4.11 and had ichat running from there. I chatted with my friend, who is on 10.5.1 - no problems at all. (so my router is not causing the problem, as I thought)
Starting from 10.5.1 again I opened up Activity Monitor and found this message every 10 secs !
25.12.07 25.12. 15:18:29 com.apple.launchd[138] (at.obdev.LittleSnitchUIAgent[654]) Exited with exit code: 1
25.12.07 25.12. 15:18:29 com.apple.launchd[138] (at.obdev.LittleSnitchUIAgent) Throttling respawn: Will start in 10 seconds
25.12.07 25.12. 15:18:39 com.apple.launchd[138] (at.obdev.LittleSnitchUIAgent[655]) posix_spawnp("/Library/Little Snitch/Little Snitch UIAgent.app/Contents/MacOS/Little Snitch UIAgent", ...): No such file or directory
I remember that I installed Little snitch some time ago and removed it manually. Then today I run the official uninstaller for it. Still I cannot get rid of this activity. May be it has to do something with the text delay in ichat? How to delete all Little Snitch processes? How can someone find these data?
Thanks for Feedback

Can I get the Trash and Send folder in IMAP

Hi,
I work now for a mail aplication using IMAP. I connect to Microsoft Exchange Server and my question is if there is a posibility to find which folder is the TRASH and which one is the SEND folder. The idea is that I can not use the name because I don't know which IMAP server the users will use (I mean the server can be in different languages and then the folders will have different names).
Thanks in advance,
Catalin Tileaga

One thing you can consider if you're using Exchange 2000 is to use the WebDAV protocol for accessing the server. If you're using Exchange 5.5 you might consider using CDO. Both protocols would allow you to get the real name of the Trash and Sent folders programmatically so that you don't have to rely on a hardcoded name. See the link below for more information...
Skip O'Grudnick
http://www.compoze.com/

Long delay getting new mail

I am experiencing a long delay in Mail getting new mail. Here's what happens:
1. on launching Mail, it gets new mail immediately, so I know my account settings are good.
2. once Mail is running, there is a long delay in updating new incoming mail -- can be hours. I have Mail set to check every five minutes. Also, I can manually click on Get Mail and I get a No New Mail beep even when there is new mail (see next point).
3. If I use webmail to access my account, I can see new mail sitting in my In Box.
4. if I quit and relaunch Mail, the new mail shows up.
I have an IMAP account which has worked well for years. This delayed behaviour started a few months ago when I was running Leopard. I posted a question but never got an answer that worked. Now I have just upgraded to Snow Leopard 10.6.4, and hoped Mail would correct itself with the upgrade. It didn't.
I was once advised that it might have something to do with the Preferences > Accounts > Advanced > "Use IDLE command if the server supports it" setting. However, this preference is ticked and greyed out so I can't change it. (The advice was to turn it on or off and see if that was a fix).
I am running on an iMac 24" Core 2 duo (early 2008 model). After the Snow Leopard upgrade I repaired permissions and ran all the chron scripts. So my system should be pretty good.
I would be grateful for any help. I have clients call and say "I just sent you an email..." and I appear dumb because I have to go to webmail to get it right away.

It's getting better. I used Other to setup my mail acc via MfE, by tricking it to a non uniform mail. That worked, I changed it back to googlemail and guess what?! Next time I boot the phone, the MfE is gone. but it still registers in the background so I can't create a new one. Configuration Tool 6.3 does see it but cannot overwrite it. PixiEnables package and its font nonsens severly screw with PopUpClock, Screensaver and SleepingScreen memory boundaries so those three crash. Thanks for nothing MS apps -.-

IMAP Mail Receipt delays

I'm having a weird issue since Yosemite. My primary email address is an IMAP mailbox that has multiple devices including my MacBook Pro, iMac, iPhone and iPad connected to it so that I stay synched across the devices. Unfortunately the iMac and MacBook Pro are seeing really long delays (20+ minutes sometimes) before the message are retrieved from the mailbox and visible.
For example, I just got a notification about new message in that mailbox on my iPhone about 10 minutes ago. I've tried multiple times to manually update the iMac but after 10 minutes the same message is still not in the InBox on the iMac. I logged onto the mail server via WebMail and the message is sitting there but the Yosemite Mail app is not retrieving the message.
This never happened on previous generations of Apple Mail, it's a problem that just started with Yosemite. Is there some setting that's different with this release that I've missed that is causing this delay even when I try to manually refresh the mailbox? Even quitting Mail and restarting it does not retrieve the message even through both of my iOS devices already have the message from the same mailbox.

Seems to be a Yosemite bug.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Mail Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

Mail all going to Spam folder

I have just loaded Lion and all my incoming mail is now going to a folder the inbox has created called Spam. I have set the Junk Filter to put all mail in my in box first even if it thinks it's junk but it still sending everything to this Spam folder. I tried deleting the spam folder, resetting the junk filter and tried sending a test e mail to myself. Mail simply recreated the Spam folder I'd just deleted and sent the test mail there. Has anyone seen this before and know how to fix it?

leroydouglas wrote:
Sounds like you have a third party spam filter software like SpamSieve- these require or create a seperate Spam filter Folder.
ricky srb wrote:
Is it possible Mail in Lion guise is seeing Intego Personal Antispam even though its switched off?
Obviously it is.
Try disabling the plug-in in Mail, or
try uninstalling IPA if you can not figure out a fix.
http://support.intego.com/kb/index.php?x=&mod_id=2&id=621

Long delay from receiving INVITE from PSTN gateway and actual end client call

I was wondering if there is anyone who can assist me in some troubleshooting long delays within the mediation server. I have a lab environment which has the front end and mediation server on the same box. I also have an audiocodes MP-114 connected to two
test PSTN lines and this is configured as a trunk to the mediation server and there is two polycom IP phones within the test environment.
Now everything works - SIP invites and media but certain aspects have significant delays.
The problem is with inbound calls from the PSTN line
PSTN via Audiocodes MP-114 to Polycom phone - When I dial the PSTN number from my mobile the audiocodes sends a SIP invite to the Mediation Server within just under a second - I was able to determine this by using the syslog and to be honest that seems a
reasonable time.
Now moving onto the OCSlogger I logged the mediation and SIP logs and the mediation server is showing the SIP invite about half a second later (I am assuming some network latency clock drift etc) which again seems fine.
I then receive various logs showing TLS negotiation between ports 5061 and high ports on the server, and dial plan matching which all seems ok and this seems to take about 1 second not great but not the biggest issue However I then dont receive any message
logs for over 3 seconds until the the mediation server states "SDP Answer to Gateway, SDP is :v=0"
Then another 4 seconds go by until another tls session is negotiated and the SIP invite is sent to the lync registered polycom phone and then the IP phone starts ringing - so it appears the mediation server is not doing anything anything for 7 seconds.
Now looking at the detailed Trace logs I get three TL_ERROR from the proxysdp.cs(1417) proxysdp.cs(422) during the delay that states
TL_ERROR(TF_PROTOCOL) [0]12EC.1ED8::02/05/2014-12:22:45.305.000b07d8 (MediationServer,ProxySdpProcessor.InternalTryParseSdpT<GlobalDescription_TMediaDescription>:proxysdp.cs(1417))
(0000000003CB324D)SDP parsing error: Empty SDP offer
and then a warning
TL_WARN(TF_COMPONENT) [0]12EC.1ED8::02/05/2014-12:22:49.028.000b080e (MediationServer,ProxyCall.FinishGetOffer:proxycall.cs(4578))[57060297]
57060297Could not get MRAS candidates from the Media Relay token. Connectivity Servers List = SRV-0003.LOCAL.COM.NULL
and an error from SIPSTACK
TL_ERROR(TF_COMPONENT) [0]1298.25DC::02/05/2014-12:22:49.034.000b1d72 (SIPStack,CISIPProxy::CreateUriFromString:ISIPProxy.cpp(1333))
( 00000000002061A0 ) Exit - not a valid SIP address. Returned 0xC3E93F25(SIPPROXY_E_INVALID_URI_SCHEME)
Now the call goes though and works fine but the delay is considerable for the first ring - Has anyone got any ideas as I am stumped at the moment
Cheers
Adam

Adam, you did not mention Edge and so, I will assume one is not deployed yet. Is this the case? Do you have edge defined in topology but not physically configured? "Could
not get MRAS candidates from the Media Relay token" indicates Mediation is trying to get Media Relay address from Edge via FE, but could not.
Drago
http://www.lynclog.com

Long delay on KDE login caused by Pulseaudio

Hi all,
I am experiencing an annoying delay after logging into KDE. This happened very recently, where I moved to pure systemd and upgraded kde (I am not sure what the exact cause is). It looks like https://bbs.archlinux.org/viewtopic.php?pid=1157890, but instead of not starting, I get a long delay.
Example:
timestamp 0 - login
timestamp 8 - desktop is loaded partially and startup freezes
timestamp 33 - loading the desktop continues
This is very reproducable, I logout and login again - the issue repeats with the same times. I have isolated the problem to /usr/bin/start-pulseaudio-x11, line:
/usr/bin/pactl load-module module-x11-xsmp "display=$DISPLAY session_manager=$SESSION_MANAGER" > /dev/null
Stracing it shows that it freezes after sending the load-module command to pulseaudio over the native socket in /tmp/pulse-XXX/native and waiting for a response. This takes about 25 seconds, the same as in the example above.
The above timestamp tests have been performed by adding the next to ~/.bash_profile:
if mkdir /tmp/checks 2>/dev/null; then
for ((i=0; i<=40; i++)); do
[ -d /tmp/checks ] || break
p=00$i
p=${p:0-2}
ps xww -o user,pcpu,cmd >> /tmp/checks/$p-ps
cp $HOME/.xsession-errors /tmp/checks/$p-xe
sleep 1
done
fi &
I then use the next to check the differences between two ps outputs (after using wc -l to count the lines in the files and using `date -r XX-ps` to check the timestamp):
read a b; colordiff -u <(sed 's/[0-9]\.[0-9]//' $a-ps) <(sed 's/[0-9]\.[0-9]//' $b-ps)|less -r
Similar to http://lists.fedoraproject.org/pipermai … 11721.html which appears to be solved, but not for me.
Does anyone else experience this issue? Any solutions?
System is up-to-date, KDE 4.9.1, pulseaudio 2.1, systemd, laptop.
Edit: the problem occured since I patched kdm to set XAUTHORITY (not sure if that is related), after replacing with the original kdm binary, the issue seems to be gone is still existent.
Last edited by Lekensteyn (2012-09-16 20:50:27)

Well yes, that just avoids the issue by preventing start-pulseaudio-x11 from starting. I'll try that workaround until a real solution shows up. Thanks for your reply.
I'll try this patch from Ubuntu quantal does not seem to work:
From b4389a752385afd6e65e412a8488828ee3648fbd Mon Sep 17 00:00:00 2001
From: Zsolt Rizsanyi <[email protected]>
Date: Sun, 27 Jun 2010 15:16:13 +0100
Subject: [PATCH 2/2] In KDE only start pulseaudio from the KDE specific desktop file
src/daemon/pulseaudio.desktop.in | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/src/daemon/pulseaudio.desktop.in b/src/daemon/pulseaudio.desktop.in
index 99bdbd0..47b2eb4 100644
--- a/src/daemon/pulseaudio.desktop.in
+++ b/src/daemon/pulseaudio.desktop.in
@@ -6,5 +6,6 @@ _Comment=Start the PulseAudio Sound System
Exec=start-pulseaudio-x11
Terminal=false
Type=Application
+NotShowIn=KDE;
Categories=
GenericName=
Creating an empty ~/.config/autostart/pulseaudio.desktop overrides the one in /etc/xdg/ and seems to work.
Last edited by Lekensteyn (2012-09-16 22:21:58)

I have an iPad 2 and receive e-mail through internet connection. When I delete e-mails, and clear my Trash folder, they re-appear. Setting are for remove from server when moved from Inbox. Any idea what I can do to actually delete them?

I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?

Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

Bridge CS4 has LONG delay in opening the first image

Photoshop CS4 upgrade was my Christmas present this year. I've been fighting this annoying "problem" ever since then...
I DO see this "problem" on my desktop PC, which is a Dell XPS-400 PC (with 2 GB of memory) running Windows XP (Media Center Edition) with SP3 installed. I DO NOT see this "problem" on my laptop, which is a Dell XPS-1530 (4 GB of memory) running Windows Vista SP1. I installed the Photoshop CS4 software exactly the same way on both machines, and I have the preferences set the same in both Photoshop and Bridge (and Camera Raw) on both machines.
Here's the situation: I first open Photoshop CS4 and then click on the Bridge icon in the Application Bar to open Bridge. When I use Bridge to open a photo, by either double-clicking the thumbnail, or right-clicking on the thumbnail and choose "Open" from the context menu, there is a 42 second delay before Photoshop opens the file. This long delay only occurs when opening the very first file.
Once that first image file is opened, double-clicking any thumbnail in Bridge will have it open in Photoshop CS4 in about 2 seconds. There will never be another long delay in having Bridge pass a file to Photoshop (or Camera Raw) again - until I close the applications and restart them. Once I restart the applications, the first photo takes 42 seconds to open....
This delay does not occur in opening the first image file if I right-click on the thumbnail in Bridge CS4 and choose "Open With" and manually choose Photoshop CS4.
Even if that is how I open the first (or several) image file(s), the first time I try to open a file from Bridge by double-clicking on a thumbnail (or right-click on a thumbnail and choose "Open") there will be that annoying 42 second delay before it opens.
It does not matter what the file format the first image file is (JPG, PSD, TIFF, or DNG), or what the file format of any subsequent image file is. As long as I do not close the Bridge and Photoshop applications, any subsequent file will be passed from Bridge to Photoshop in only a couple of seconds.
I have manually set the File Name Extensions in Windows XP, and in the Preferences in Bridge. Both have been set to open the file types listed above with Photoshop CS4.
I have uninstalled CS4, and have used two seperate Registry cleaners (CCleaner and jv16 Power Tools) before re-installing Photoshop CS4. This had no effect on this situation. I've run "chkdsk C: /r" several times, with no problems reported.
I have been searching through these forums for over 2 weeks now, and I have not seen anyone else report such a problem. I use my XP desktop much more than my Vista laptop, so I'd really like to fix this situation, but I don't know what else to try.
Gregg Mack

Don,
Thanks for all of your suggestions. I tried them all, but the problem remains exactly as it was. To properly document my efforts:
In Bridge's Preferences, I Purged and Compacted the Bridge Cache, then changed it's location to D:\Bridge_Cache (D:\ is a second physical internal SATA drive).
I can not tell the exact size the Cache is set to, but the slider in Bridge's Preference is very close to the left end (10,000) of the slider.
The Windows Page File is set to 3072 MB min and 4096 max, and it is entirely on the D:\ drive. (I have 2GB of physical RAM in the PC.)
I defragmented the C:\ drive using Diskeeper 2008 Pro Premier, and even ran a Boot Time Defrag.
Rather than set some exclusions for Norton Anti-Virus, I jsut disbled that Virus checking program for all of my experiments.
I deleted the Bridge Preference File by holding down the Ctrl key as Bridge was restarted.
I even deleted the entire contents of the C:\Windows\Prefetch folder. I then rebooted the PC - twice. I then re-disabled Norton Anti-Virus.
The PC is approaching 3 years of age, but it is a 3.2 GHz Pentium D machine with 2 GB of RAM and two internal SATA drives. Every other application that I run on this machine responds reponsively. Again it is only the FIRST image file that I have Bridge hand off to Photoshop (or Camera Raw) that takes forever. The second and subsequent image files take a second or two.... That doesn't sound like it's an "old hardware" problem to me.
I'm willing to try anything else that you, or anyone else would like to suggest.
Thanks
Gregg Mack

Since downloading Rosemite I have had long delays in starting up my iMac ?

I downloaded Yosemite on my iMac on 20.10.14 and have been experiencing long delays in starting up each day ?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the BOOT_TIME log message that corresponds to the last boot time when you had the problem. Now clear the search box to reveal all messages. Select the ones logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes   after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract—not at the end.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A GPU restart report has a name that begins with "Kernel" and ends in ".gpuRestart". Select the most recent of each. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Sending mail = long delays in send folder

Similar Messages

Maybe you are looking for