Sending Mail on the Failure of Outbound IDOC Creation
Hi Experts
I Have a requirement to send mail on failure of Outbout creation . Any standard report exists ?
Any sample programmes
Thanks and regards
RMP
I think what you are asking for is possible, but I'm not sure how. Try posting this question on the Process Integration forum (PI uses iDocs), I'm sure someone will know the answer.
Similar Messages
-
How to create the material using outbound IDOC
Hi all,
how to create the material using outbound IDOC.Hi..
follow the steps...
1) create a partner profile for material
2) create a material
3) go to transaction BD10 , give material no and then execute.
4) go to transaction WE02 to chk the status.
if you want to send Outbound idoc automatically once the material is cretaed then use change pointers concept.
please get back to me if you need any assisstance further.
Regards,
Lokeswari. -
We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.
About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone. Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc. This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...
-
I have recently purchased the iphone 5S and have two AOL email accounts set up on it. They could both receive and send mail on the first day, but from the second day only 1 can send mail (both still receive). I get an message saying "Unable to send mail. A copy has been placed in your Outbox. Sending the message content to the server failed." This has been the response now for 3 days and suddenly this morning, I was able to send an email from this account, but only the one and now it's back to that same message. I have deleted and added the account again, using various methods. I even reset my phone and set it all up again from beginning with no luck. It is very frustrating and I am unsure why I can't send from both accounts, especially being that they are the same provider. I have read forums and it appears many have this same problem and I wondered if anyone has had it recently on this phone and how they fixed it. Someone said just use the AOL app to send from this account, yes that can be done, but it's inconvenient having to sign in all the time when i have a mail app that should work automatically. Any suggestions would be welcomed!!
I am not sure if this issue is going to help you but lets give it a try.
I know that where im from, which is the Netherlands, I am not able to sent e-mails from my iPhone or any other mobile device by using 3G or a random WIFI acces point. The provider only allowes you to sent e-mails when you are connected to a network of there own. Which means if you have provider "101" and your email settings are set up for this provider in your iPhone but your using the network of a friend of yours which is provider "202" you cannot sent emails from his network. Though you can receive them you may not sent.
As I said, I am not aware if this issue is the same for you totaly depents on the country and provider your using. -
I have been using Thunderbird for a couple of years. On Friday 10 Apr my home email account stopped sending either new messages or replying to incoming emails. In addition I have Thunderbird get my work email and I can send and receive email just fine. I can also send email from my android phone and via the web.
The message that has started coming up is the following:
An error occurred while sending mail. The mail server responded: 5.7.1 [P4] Message blocked due to spam content in the message.. Please check the message and try again.
I have tried reinstalling Thunderbird but nothing changed, I tried changing the port from 25 to 587 to 465 but nothing changed. I do not understand what is going on as on Wednesday Apr 8 everything was working just fine.I have just tried ringing RCN and they tell me that because I am not using an RCN email as such they can not help but he suggested that it was a filter in Thunderbird but I have not set any filters and can not see if there are any or how to change them. The only way sending my website url right now is to make it not look like a url. Where do I need to look to solve this as I first wrote last week everything was fine.
-
Having been on Thunderbird for some years I have suddenly got the following message when trying to send mail.
An (SMTP) error occurred while sending mail. The server responded: Requested action aborted: This mail account has sent too many messages in a short amount of time. Please try later..
I have checked the SMTP server settings in tools, account settings and they are as they have always been. Is there something I have missed?Sending through web mail is totally irrelevant to using an SMTP server. The message even says it is from the server. Why do you think this is a Thunderbird problem.
The provider has put in place measures to keep people from spamming other email recipients using thier SMTP server. You have seen the result of those measures. -
i can't send an e-mail from thunderbird, it was working well though , suddenly it says the following message:An error occurred while sending mail. The mail server responded An error occurred while sending mail. The mail server responded: (Alis-MacBook-Air.local) [46.138.187.135]:51054 is currently not permitted
OR
i have changed the port from 587 to 465 but still cannot send e-mail, it keep sending and sending for 5 minutes and respond is time out?Can you post your Troubleshooting Information?
Help (Alt-H) - Troubleshooting Information -
When I send message the reply is "Access Denied" and a bunch of gobbly-gook ending with please re-check message. What would I check for? The G-G is of absolutely no value to the human species.
An error occurred while sending mail. The mail server responded: Access denied...3c61d9886161c1c1b119b169f84d0c00bd1d41014c8da58d391805d17cbcdccd89e9557dcc85058535d178217d0831cc6d65.... Please check the message and try again.
So what now. Mozilla must be the offspring of Microsoft in that help NEVER HELPS, EVER.Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you. -
When I send mail, I keep getting this message.
An error occurred while sending mail. The mail server responded: "JunkMail rejected - 71-12-190-31.dhcp.leds.al.charter.com ([127.0.0.1])
[71.12.190.31]:52956 is in an RBL, see
http://www.spamhaus.org/query/bl?ip=71.12.190.31". Please check the message recipient [email protected] and try again.
How do I get rid of this problem?
WNSHi there,
If you have a closer look at message you are receiving it already states the problem. The domain 71-12-190-31.dhcp.leds.al.charter.com is blacklisted by spamhaus.org (is in an RBL).
Your TB is (my guess) setup to send the message directly to the recipient.
As a rule of thumb the majority of mail sent from a dynamic dns address (the kind of address you are getting from your ISP) is blacklisted as a precaution against spam abuse due to virus/trojan infected PC's.
Nothing you can change there. Stop sending the message directly and use your ISP's account instead.
/Frans -
My previous request had an incorrect email. This error began yesterday and I can't reply or send new emails from my PC, but email is working on my iphone.
I have been doing that. Here is the complete message I get. It was cut off in my initial question. "An error occurred while sending mail. The mail server responded: Authentication is required before sending [R0107005]. Please verify that your email address is correct in your Mail preferences and try again."
-
I am trying to send a message with an attachment, I get this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles help us stop spammers.). Please check the message and try again.
== TodayMe too (with Thunderbird). EXCEPT it reads
Requested action not taken; This account is currently blocked from sending messages. If you don't think you've violated the Windows Live Terms of Use, please contact customer support...
Occasionally the mail "sends", but it is unpredictable. Tech Support at Qwest (for q.com under Windows Live) does not find a problem at their end.
More suspiciously, the same account accessed from my Mac does not seem to exhibit this problem. Have reloaded T'bird. Recurred again. -
An error occurred while sending mail. The mail server responded: Relaying not allowed.
Suddenly I am not able to send any email from my account, from pc or phone.
It gives error message "An error occurred while sending mail. The mail server responded: Relaying not allowed. Please check the message recipient --------and try again."
I have checked account setting and is correct. please helpThis message, which comes from the server, usually means that you are using an smtp server provided for use with one particular account to send messages "from" other accounts. The fact that it also happens with your phone does indicate that it is external to Thunderbird.
How many different email accounts do you have? How many different providers are involved? -
An error occurred while sending mail. The mail server responded: Administrative prohibition. Please check the message and try again.
Somtimes it says it spam also......The error message is being generated by your email provider's server. Best to ask them what they do not like about your messages and how to solve the problem.
-
Problem in sending mail with the given code
package booodrive;
Some SMTP servers require a username and password authentication before you
can use their Server for Sending mail. This is most common with couple
of ISP's who provide SMTP Address to Send Mail.
This Program gives any example on how to do SMTP Authentication
(User and Password verification)
This is a free source code and is provided as it is without any warranties and
it can be used in any your code for free.
Author : Sudhir Ancha
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
import java.io.*;
To use this program, change values for the following three constants,
SMTP_HOST_NAME -- Has your SMTP Host Name
SMTP_AUTH_USER -- Has your SMTP Authentication UserName
SMTP_AUTH_PWD -- Has your SMTP Authentication Password
Next change values for fields
emailMsgTxt -- Message Text for the Email
emailSubjectTxt -- Subject for email
emailFromAddress -- Email Address whose name will appears as "from" address
Next change value for "emailList".
This String array has List of all Email Addresses to Email Email needs to be sent to.
Next to run the program, execute it as follows,
SendMailUsingAuthentication authProg = new SendMailUsingAuthentication();
public class SendMailUsingAuthentication
private static final String SMTP_HOST_NAME = "sample.com";
private static final String SMTP_AUTH_USER = "demo";
private static final String SMTP_AUTH_PWD = "demo";
private static final String emailMsgTxt = "Online Order Confirmation Message. Also include the Tracking Number.";
private static final String emailSubjectTxt = "Order Confirmation Subject";
private static final String emailFromAddress = "[email protected]";
// Add List of Email address to who email needs to be sent to
private static final String[] emailList = {"[email protected]"};
public static void main(String args[]) throws Exception
SendMailUsingAuthentication smtpMailSender = new SendMailUsingAuthentication();
smtpMailSender.postMail( emailList, emailSubjectTxt, emailMsgTxt, emailFromAddress);
System.out.println("Sucessfully Sent mail to All Users");
public void postMail( String recipients[ ], String subject,
String message , String from) throws MessagingException
boolean debug = false;
//Set the host smtp address
Properties props = new Properties();
props.put("mail.smtp.host", SMTP_HOST_NAME);
props.put("mail.smtp.auth", "true");
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getDefaultInstance(props, auth);
session.setDebug(debug);
// create a message
Message msg = new MimeMessage(session);
// set the from and to address
InternetAddress addressFrom = new InternetAddress(from);
msg.setFrom(addressFrom);
InternetAddress[] addressTo = new InternetAddress[recipients.length];
for (int i = 0; i < recipients.length; i++)
addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/plain");
Transport.send(msg);
* SimpleAuthenticator is used to do simple authentication
* when the SMTP server requires it.
private class SMTPAuthenticator extends javax.mail.Authenticator
public PasswordAuthentication getPasswordAuthentication()
String username = SMTP_AUTH_USER;
String password = SMTP_AUTH_PWD;
return new PasswordAuthentication(username, password);
package booodrive;
public class Test {
public static void main(String args[]){
SendMailUsingAuthentication authProg = new SendMailUsingAuthentication();
I am not able to send mail using the above given codes. Can anyone please help?
Rony
Edited by: RonyFederer on Aug 10, 2008 9:04 PMYour first step is to diagnose the problem.
1. Does the code compile? If not, what error messages appear?
2. Does the code run? If not, what error messages appear? What's in the stack trace?
3. Does the code do what you expect it to do? If not, what are the differences? -
How to update the status of Outbound IDOC in case of error
I want to know about how to update the status of Outbound IDOC in case of error.
I am using message control functionality here.HI,
If u r using the standard message and basic type
u can do it in the FM attached to the basic and message type.There u need to write ur own message instead of standard SAP message..chek if there r any userexits available in the FM..where u can overwrite ur own message ..
If u r using the Zmessage and Zbasic type
then u need to declare an internal table of EDIDS structure and then append ur message to the internal table..
idoc_status-docnum = idoc_contrl-docnum.
idoc_status-msgty = <message type>
idoc_status-msgid = message-id.
idoc_status-msgno = message-number.
idoc_status-msgv1 = message-message_v1.
idoc_status-repid = sy-repid.
idoc_status-status = <give the error status>.
APPEND idoc_status.
Reward if u find useful
Regards,
Nagaraj
Maybe you are looking for
-
Hi, When i am using more than one receive steps(each can start the process) in a fork then if i dont use the correlation it throws me a semantic error that "step does not use any correlation". according to me if i declare the necessary branches prope
-
Postfix error, no Queue, mail service dosen't work anymore.
Hi, I reinstall my osx server 10.5.5 and now the mail service dosent work anymore. In the SMTP log I get this error every time anyone try to send a email to this server. postfix/smtpd[12554]: NOQUEUE: reject: RCPT from relais.videotron.ca[24.201.245.
-
Radeon X800XT in a G4 MDD 867 mhz?
Can a flashed Radeon X800XT be used in a G4 MMD 867 mhz? I assume it will need to draw power from the optical drive, is a standard Y cable OK? Do pins 3 and 11 will need to be taped?
-
Thinkpad S531 keyboard problem
Hello everyone. I have bought my Thinkpad S531 almost a year ago (still under the warranty) but the problem I am having persists from the moment I bought it, I just didn't have the time to deal with it. I am using my laptop in dual boot and the probl
-
Arch and Slack - What's the difference?
I'm from the Ubuntu camp. I've been using Linux for close to three years now and getting bored. I desperately need something more complicated. My question is - what's the difference between Arch and Slackware? I've used Slackware in the past. I a