Sending mail: only old addresses prompted (not in 'Prev. Recipients')

Often, not always, after in Address Book I update an email address in sets of addresses I send mail to; and even if I delete from 'Previous Recipients' the shorthand name I use, when I go to add that set's name to an email, it only prompts the old version of the set.
Since there are typically 10 or so email addresses, I would love to know how to get Mail to recognize the updates I make in my A.B. sets, instead of editing the prompted old version every time!
I usually don't bother creating groups of AB cards--typically I put several addresses into a single A.B. card and give it a short name.

BOL: Configure SQL Server Agent Mail to Use Database Mail
Using Database Mail with SQL Server Agent
Look in Event Viewer & Agent log to find related messages.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

Similar Messages

  • Mail will not send mail, only receive.

    I have spent the majority of today re-installing OS X and all necessary updates, music, data after the death of a hard drive. Luckily everything went perfectly, except for the same problem I had with Mail even before the 1st hard drive died. Mail will not send mail, only receive.
    All efforts time out and give me this message: "The connection to the server mail.earthlink.net on port 25 timed out"
    Mail used to send messages, but stopped suddenly in 2004 and has yet to start again. Any idea guys?! I can't figure it out, under Account settings I have necessary fields filled in: Outgoing Mail Server (SMTP) is set to "mail.earthlink.net", Server Port is set to 25, and Authentication drop menu is set to None.
    Any help would be greatly appreciated.
    --DANIEL

    This is NOT a problem with Mail or OS X. This is an incorrect settings problem - garbage in = garbage out and this information is certainly available at Earthlink's website and Earthlink also provides technical support.
    Earthlink has an authenticated SMTP server they changed to long ago.
    SMTP Server: smtpauth.earthlink.net
    Server Port: 587 but 25 should work if you are using Earthlink as your internet service provider for connecting to the internet.
    Use SSL: Off or not selected.
    Authentication: MD5 Challenge-Response
    User Name: Your ENTIRE Earthlink email address.
    Password: The account's password - the same password used to check the incoming mail server for new messages.

  • HT5557 since i updated my Apple ID with correct email address I can now only send imessages to email addresses and not iphone numbers - any idea how to fix this problem ?

    since i updated my Apple ID with correct email address I can now only send imessages to email addresses and not iphone numbers - any idea how to fix this problem ?

    You might want to try contacting Apple for assistance by going to https://expresslane.apple.com, then click See All Products and Services>iTunes>iTunes Store>Passwords & Security Questions>Lost or Forgotten Apple ID password.  They should be able to explain what's going on and help you reset the password for the old ID if necessary.  The call should be free.

  • Failure sending mail: the specified string is not in the form required for an e-mail address.mail will not be resent. Email Notification Component Properties works fine.

    I know there are a few other questions like this but I can't seem to find how it's relating to my issue.  I am getting the familar failure sending mail: the specified string is not in the form required for an e-mail address.mail will not be resent.
    in the reports feature of sccm. 
    I just picked a sample report Compliance 4.  I right clicked hit create subscription and input my email into the TO: field.  When it runs i get the above error.  I checked the email notifcation under configure site components and was able
    to successfully send a test message from there but I dont get why it doesnt work on the subscription.  
    Any Ideas?

    The log is pretty big so im not sure where I can upload it.  I think it would be too big to paste here but I have copied what I think you are looking for in the log and will paste it here.  Let me know some place I can send you the full log file
    or if you want a different log.
    schedule!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Handling Event TimedSubscription with data 2946db38-5a07-4fb1-ad06-d7714e25b1ba.
    library!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Schedule 534ad96b-a680-4630-a865-9f99e1087e3f executed at 12/07/2014 00:02:03.
    schedule!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Creating Time based subscription notification for subscription: 2946db38-5a07-4fb1-ad06-d7714e25b1ba
    library!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Schedule 534ad96b-a680-4630-a865-9f99e1087e3f execution completed at 12/07/2014 00:02:03.
    library!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Initializing EnableExecutionLogging to 'True'  as specified in Server system properties.
    notification!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Handling subscription 2946db38-5a07-4fb1-ad06-d7714e25b1ba to report Compliance 4 - Updates by vendor month year, owner: LEGISLATURE\mrykhoe, delivery extension: Report Server Email.
    emailextension!WindowsService_37!a04!12/07/2014-00:02:06:: e ERROR: Error sending email. Exception: System.FormatException: The specified string is not in the form required for an e-mail address.
       at System.Net.Mime.MailBnfHelper.ReadMailAddress(String data, Int32& offset, String& displayName)
       at System.Net.Mail.MailAddress.ParseValue(String address)
       at System.Net.Mail.MailAddress..ctor(String address, String displayName, Encoding displayNameEncoding)
       at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.CreateMessage(Notification notification)
       at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
    notification!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Notification f06f40a4-32f3-4fa6-8077-89083cc7a2a2 completed.  Success: True, Status: Failure sending mail: The specified string is not in the form required for an e-mail address.Mail will
    not be resent., DeliveryExtension: Report Server Email, Report: Compliance 4 - Updates by vendor month year, Attempt 0

  • Sending mail to Internet address from SAP system

    Hi...
    My requirement is to send a mail to an internet address say ABC@companyid from SAP.
    I have used a FM So_New_Document_Send_API1 for the purpose.For this I have provided
                 e_mailrec-receiver = w_emailid.
                  e_mailrec-rec_type = 'U'.
                  APPEND e_mailrec.
    But I get an error msg in SOST, that the route from (SAP server) to (mail id) not found.
    Instead of internet address when I give rec_type as B i.e. SAP USER it sends a mail to my SAP inbox.
    I have also checked SAPConnect, and it is fine.
    Is the above FM only for sending mails to SAP id, then wats the FM for sending mails to internet address? Its just sending a 1 line mail without attachment.
    P.S: I have gone through search in sdn so please don't provide me with links to other threads.
    Reply only if you can actually help and know wats this about.
    Thnaks and Regards.

    These are the FM for sending external email :-
    SO_DOCUMENT_SEND_API1
    Send new document with attachments via RFC
    SO_NEW_DOCUMENT_ATT_SEND_API1
    (In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
    Send new document with attachments via RFC
    Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
    SO_NEW_DOCUMENT_SEND_API1
    Send new document
    For Code
    http://www.forum.saptechies.com/viewtopic.php?t=5562

  • When I try to send mail to multiple addresses, it tells me it cant send with selected server.  It sends mail to one address fine.

    When I try to send mail to multiple addresses, it tells me it cant send with selected server.  It sends mail to one address fine.

    contact your email service provider and ask them (it might treat multiple e-mails as SPAM)

  • I want to bcc myself when sending mail from one account but not another. When I check "automatically bcc myself", it bcc's me from both accounts.  Can I set this to work with only one account?

    I have two mail accounts on my Mac.  I want one account to bcc me when I send emails from that account.  I checked "automatically bcc myself" under mail>preferences>composing, but both accounts bcc me when sending mail.  Can I set this to only bcc myself from one specific email account? Thanks.

    It does not make sense that your ssh does not have a dash capital Y (-Y) option. It is in "man ssh", and my 10.6.6 has the -Y option, and I've had a -Y option since at least Tiger (10.4) days.
    My ssh is in /usr/bin/ssh
    I'm not very good at X11 issues, so I'm just throwing ideas out there.
    Does your broken account have a $HOME/.ssh/config file, and if so, what is in it?
    Does the broken account have any $HOME/.x* or $HOME/.X* files that X11 might be reading to configure your X11 behavior differently from the new test account?
    $HOME/.Xauthority
    $HOME/.Xdefaults-<hostname>
    $HOME/.Xresources
    $HOME/.ICEauthority
    $HOME/.keymap.km
    The above are a few names I found looking through "man X"
    While I'm thinking about it, I assume that when going to the server, you are using the exact same user account on the server, so that you have a constant at least at that end.
    Have you tried trashing your
    $HOME/Library/Preferences/org.x.X11.plist
    file, to see if that is affecting the broken account?
    Again, I am just throwing out ideas to see if anything sticks.

  • Can't send Mail with AOL address-out of ideas

    hello,
    I can recieve mail just fine. It's only when I try to send it. I've tried changing the outgoing server to smtp.aol.com and 4.78.166.10.
    changed the ports from 25 to 587 to 1024.
    I appreciate your help. thanks in advance.
    -Seth
    powermac g4   Mac OS X (10.3.9)  

    My girlfriend and I are RoadRunner customers and RR allows using an SMTP server outside of their network as long as the SMTP server is authenticated.
    I set up my girlfriend's AOL account in Tiger Mail (and the only email account she uses) on my old TiBook that I loaned her until she purchases her own Mac and she sends mail with her AOL account with no problems.
    The AOL SMTP server settings are as follows:
    Outgoing Mail Server: smtp.aol.com
    Server Port: 587
    Use Secure Sockets Layer (SSL): Off or not selected.
    Authentication Type: Password
    User Name: Your AOL screen name or the portion of your AOL email address in front of the @ sign only.
    Password: The password for this screen name/email account - the same used for checking the account for new mail.
    If your settings are the same, try deleting and recreating the account in Mail.
    If this doesn't work and it should since it works for my girlfriend, you can select/use the RR SMTP server to send mail with your AOL account which is invisible to all recipients.

  • Can't send mail to specific address

    I am having problems sending mail to my brother from my ibook. When I send it from .mac it is fine but when I send it from the Mail application (postage stamp) it appears in my sent items as normal but never arrives with my brother. This is the only address (that I know of) that is affected by this. Any ideas ?

    Webmail access does not use an SMTP server as does an email client such as the Mail.app.
    Not too long ago, Microsoft's incoming mail server for Hotmail accounts was capturing messages sent by the Mail.app under Tiger. The received messages were not marked as junk by Hotmail's incoming mail server and were not delivered to the recipient with no bounced back error message or a notification of any kind to the sender or recipient.
    Microsoft quietly acknowledged this problem (programming errors at the incoming mail server) which was eventually resolved.
    Long story short, if you are using .Mac's authenticated SMTP server to send messages with your .Mac account via the Mail application, the recipient's incoming mail server may be flagging any messages sent by .Mac's SMTP server as junk/spam. I would ask your brother to contact his ISP or email account provider for his email account to inquire if his email account provider has blacklisted either the .Mac SMTP server or a range of computer IP addresses for which you may fall under.

  • Send mail to external address using send mail step.

    Hi all,
    I have one question.
    In a send mail step of workflow, when the recipient type is a Organizational Object and Org Unit, the mail is only sent to workplace? I would need to send the mail to external address from all users of Org Unit. Is possible it?
    Thanks
    Regards,
    David.

    Hi,
    1) In the Recipient type select the E-Mail address from the drop down
    2) And give the email id (in the text box)
    3) Then save & test it.
    4) Once it execute goto t.code SOST and see the email entry.
    5) If entry not found, the SCOT settings is not done then check with Basis Team
    6) If found, select it and execute.
    7) And check you email
    Regards,
    Surjith

  • Unable to send mail to some addresses after move to Leopard

    I am not sure, whether I am in the right forum with my question. If not, please tell me where I should go.
    I am traveling a lot for work and have clients in many countries. Since 2004, I have been using Mac laptops and have not encountered any problems sending mail through clients' LANs, from my own place to clients, or from any number of hotels to clients. I migrated from Tiger to Leopard on the day the latter OS became available.
    Since the move, I am experiencing a problem sending mail to one specific client. I can no longer send mail to my various contacts within that client's premises (all of whom share the same domain name) from outside. I also cannot send mail to any of those contacts when I am hooked up to the client's network (but not the domain) whilst within the client's premises.
    I use Mail and a mac.com address. I do not use web-mail. It is further noteworthy that messages from my side without attachments will sometimes (perhaps 20% of the time) go through. However, messages with attachments never go through. I have discussed the matter at length with the two IT-experts at the client (a government office) and we have not been able to come up with suggestions.
    Since I am now forced to use a USB-stick to exchange info with my client, I would much welcome your suggestions as to the cause of the problem and possible solutions. Many thanks in advance.

    Thank you for taking up the issue, Type17. The mails do not disappear, they remain in my outbox (on my Mac). The intended recipient does not get a message. I, for my part, see a box with the message 'Cannot send the message using the server 'smtp.mac.com: myloginname'. The server name is highlighted in blue in a box below and I get the choices: 'Edit message', 'Try later' and 'Try with selected server'. None of these resolves the problem. The last option, i.e. 'Try with selected server', is a bit strange, because pressing the button 'Edit server list', shows only the server already mentioned. I have tried 'Connection doctor' several times over the past months, but this consistently gives me a green light against the smtp and the message: 'Connection and login to server successful'.

  • What's the terminal command to insert the text that appears when I send mail to Bcc addresses?

    I remember there was a cool add-on to some mail clients like Eudora years back where one could juggle the text that people receive instead of the addresses if you send mail in Bcc... Is there any possibility to change what Apple Mail sends?
    What if, insetad of the usual "undisclosed recipients" I want something else like "omissis" to appear?

    (1) you can't insert a sheet in Pages. Only tables !
    (2) before pasting your table in Pages, you may resize it so that it may fit in a page.
    (3) the users which took time to look in Pages User Guide are aware of a feature described as : Linking Text Boxes.
    It's a good answer to your problem.
    In a Word Processor document, create a text box and paste your table in the new tex box.
    At the bottom of the box you will see a small square with a symbol plus. It's a flag warning you  that the box contents is too large for the box.
    No problem, insert a page break to force the opening of a new page then read carefully the user guide :
    Applying what I highlighted, you will create a new box linked to the first one so that your table will flow in it.
    If it's not sufficient, you may link a third box …
    More, we are allowed to rotate the text boxes so you may edit them a way allowing them to host your landscape table.
    From my user's point of view, it's absolutely intuitive.
    Yvan KOENIG (VALLAURIS, France) dimanche 26 juin 2011 21:29:56
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Can't Send Mail To Outside Addresses In Mail Applications

    I am currently running mac os x server 10.4 and using the mail server. I started out using WebMail. It worked fine, I could send and receive to and from anyone. Now hat i have multiple addresses it is easier to use a client like mail.app or mozilla thunderbird. I can send and receive mail to and from addresses hosted by my server fine. I can only receive mail from outside addresses i cannot send mail to them. Does anyone know what I can do to fix this?

    Without knowing more about your configuration it's hard to say.
    Most likely your client computer is not in the allowed networks (while webmail running of your server was). But that is a guess.
    If you need more info, please post the unmodifed output of postconf -n and some log snippets.
    Alex

  • Cannot send mail. only receive, at home. fine at work

    I have 2 email addresses and both receive mail fine no matter which server I am using. However I cannot send outgoing mail from either address when I am at home. I CAN send mail at work or school, however, using their servers.
    It gets worse though, because none of my roommates are having any problems with their mail! (But none of them have macs). So they can all send mail at home, but I cannot.
    Any ideas?

    Most, if not all ISPs used for connecting to the internet block the use of SMTP servers that are outside of their network on Port 25. Some ISPs allow the use of an authenticated SMTP server only that is outside of their network on Port 25 but some block its use regardless. Each ISP has different restrictions. These restrictions are in place as part of an overall effort to prevent spam emanating from the ISP's domain.
    If an ISP is blocking the use SMTP servers that are outside of their network, it makes no difference if you are using an email client on a Windows PC or on a Mac.
    Are you using the same or a different SMTP server for each account and if you are using a different SMTP server for each account, is one or both authenticated?
    Who is your ISP used for connecting to the internet when at Home and do you have access to an email account and SMTP server that is provided by your ISP at Home?
    Something to try first.
    Go to Mail > Preferences > Accounts and under the Account Information tab for the account preferences at the SMTP server selection, select the Server Settings button below. Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
    Do this for each SMTP server if you use a different SMTP server for each account.
    If this does not resolve the problem, you need to contact your ISP used for connecting to the internet when at Home to determine what is required to send messages with an SMTP server that is outside of their network or that isn't provided by the ISP.
    If you have access to an email account and SMTP server provided by your ISP at Home, try adding the ISP's SMTP server to the Mail.app and select this SMTP server for each account which is invisible to all recipients.
    When returning to work or school, you might be able to use this SMTP server for both accounts and if not, you must select the previous SMTP server or servers for each account.

  • Problem sending mail to AOL addresses

    Over the past week or two I've noticed I'm getting a lot of "mail delivery subsystem" messages that say " Warning: could not send message for past 4 hours THIS IS A WARNING MESSAGE ONLY ** YOU DO NOT NEED TO RESEND YOUR MESSAGE". This only seems to happen when I send mail to people with aol.com addresses. How do I fix this?

    I recently got the same message and as I understood the message, AOL's servers weren't working (correctly):
    ----- Transcript of session follows -----
    ... while talking to mailin-02.mx.aol.com.:
    DATA
    421-: (RLY:NW) http://postmaster.info.aol.com/errors/421rlynw.html
    421 SERVICE NOT AVAILABLE
    ... while talking to mailin-01.mx.aol.com.:
    DATA
    421-: (RLY:NW) http://postmaster.info.aol.com/errors/421rlynw.html
    421 SERVICE NOT AVAILABLE
    ... while talking to mailin-04.mx.aol.com.:
    DATA
    421-: (RLY:NW) http://postmaster.info.aol.com/errors/421rlynw.html
    421 SERVICE NOT AVAILABLE
    ... while talking to mailin-03.mx.aol.com.:
    DATA
    421-: (RLY:NW) http://postmaster.info.aol.com/errors/421rlynw.html
    421 SERVICE NOT AVAILABLE

Maybe you are looking for