Sending mail pooping out

I get the following error message when trying to send mail:
The server response was: http://njabl.org/dynablock.html.
Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
This message appears regardless of who I send to or what outgoing server I use. Please Help!!

Contact your ISP about the problem. This would likely be a problem at their end unless you are using that site to block or report spam in which case you should visit the URL and read the posted message.

Similar Messages

  • How to send mail with out attachment in a report using oops concept

    Hi Abap Experts,
                     My requirement is i have to send a mail with out attaching any documents this is a report using oops conceopt how can i acheive it .

    Hi Saeed,
    Please search SDN before posting. There are so may threads for the same.
    Check out the standard reports--
    bcs_example_1, bcs_example_2, .. bcs_example_7
    Howard

  • Send Mail timed out

    Ok, so I'm relatively new to OS x server but I consistantly am having a sendmail problem. I can receive mail and send mail "most" of the time. But, I do get errors when sending to blackberry's, hotmail, and essentially random domains. What I get are conection timed out error. Heres an example from my SMTP log :
    Nov 9 19:36:56 (servername) postfix/smtp[21684]: connect to mail.senecac.on.ca[142.204.1.36]: Operation timed out (port 25)
    First of all, anyone have any comments or solutions?
    Second On my router I have doubled/triple checked that my port 25 is open. I can send send mail to some domains with no fail. When i send to my blackberry i get log data like this :
    Nov 9 19:31:02 Winterswarmth postfix/smtp[21627]: A566E3F45C: to=<[email protected]>, relay=none, delay=30, status=deferred (connect to mail.senecac.on.ca[142.204.1.36]: Operation timed out)
    Nov 9 19:31:02 Winterswarmth postfix/smtp[21628]: connect to mx1.rog.mail.yahoo.com[67.28.113.16]: Operation timed out (port 25)
    Nov 9 19:31:32 Winterswarmth postfix/smtp[21628]: connect to mx1.rog.mail.yahoo.com[64.156.215.23]: Operation timed out (port 25)
    Nov 9 19:32:02 Winterswarmth postfix/smtp[21628]: connect to mx2.rog.mail.yahoo.com[66.94.225.172]: Operation timed out (port 25)
    Nov 9 19:32:03 Winterswarmth postfix/smtp[21628]: A566E3F45C: to=<[email protected]>, relay=mx2.rog.mail.yahoo.com[206.190.37.6], delay=91, status=sent (250 ok dirdel)
    In the end it send, it just takes several attempts.
    Any help would be appreciated.

    I think you are confusing things here.
    While you can change the port used for submission from your mail clients to your mail server, you cannot (should not) change the outgoing port for your smtp server. All mail servers expect incoming traffic on port 25, thus using port 587 will not get your mail delivered (it will go through your firewall, but that's about it).
    If your mail server (not client) is behind a firewall with port 25 blocked, there is no way it can send mail to outside domains. So either get your ISP to let port 25 through for your server or use your ISP's smpt server to send mail (this can be done directly, or through your mail server relaying through your ISPs server).

  • Cannot send mail when out and about

    Hey all
    I recently got my Iphone4 and synced it to my mail on my computer. When using my iphone at home it send mail without a problems as it goes through my wifi I have. Internet is virgin media and mail is with windows mail by the way incase its important.
    When I am out and about I can recieve email without a problem but cannot send anything at all.
    What do I need to do so that I can send mail no matter where I am?
    Thanks
    Ant

    It's most likely exactly the same issue. Most ISPs only allow you to use their outgoing email server whilst connected to their internet service.
    With a mobile device like an iPhone you won't always be connected to your ISPs internet service. Sometimes it will be your mobile network provider (when on 3G), or on some other WiFi service like a public hotspot in Starbucks or McDonalds.
    When you are not connected to your ISPs internet service, you either have to use the SMTP server of the internet provider you are connected to (awkward to keep changing, even if you know it), or you "authenticate" your connection to your ISPs SMTP server (if they allow it) with a username and password so that they can verify it is you who is using their server and not some spammer.
    The best way to avoid all this, is to use an email provider that is totally independent of any internet provider and will therefore work from anywhere, regardless of how you are connecting to the internet.
    GMail and Apple's own MobileMe offer authenticated SMTP servers that work from anywhere.

  • Sending mail with out attachement

    hi experts,
    what is the function module to send a mail with out attachment?
    i am using this function module.
            CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
              EXPORTING
               DOCUMENT_DATA                    = maildata
               DOCUMENT_TYPE                    = 'RAW'
               PUT_IN_OUTBOX                    = 'X'
               COMMIT_WORK                      = 'X'
              TABLES
               OBJECT_HEADER                    = mailhdr
               OBJECT_CONTENT                   = mailcnt
               RECEIVERS                               = mailrec
             EXCEPTIONS
               TOO_MANY_RECEIVERS               = 1
               DOCUMENT_NOT_SENT                = 2
               DOCUMENT_TYPE_NOT_EXIST          = 3
               OPERATION_NO_AUTHORIZATION       = 4
               PARAMETER_ERROR                  = 5
               X_ERROR                          = 6
               ENQUEUE_ERROR                    = 7
               OTHERS 
    if i use this function module i will receive mail as an attachment but  my aim is to send mail as message.
    here i will get that message in some file as attachment.
    is  there any other function module to send mail as per my requirement?
    please help me regarding this.
    thanks and regards,
    nag.

    Hi,
    Refer this example.
    *& Report  ZSENDEMAIL                                                  *
    *& Example of sending external email via SAPCONNECT                    *
    REPORT  zsendemail                    .
    PARAMETERS: psubject(40) type c default  'Hello',
                p_email(40)   type c default 'Some email address'.
    data:   it_packing_list like sopcklsti1 occurs 0 with header line,
            it_contents like solisti1 occurs 0 with header line,
            it_receivers like somlreci1 occurs 0 with header line,
            it_attachment like solisti1 occurs 0 with header line,
            gd_cnt type i,
            gd_sent_all(1) type c,
            gd_doc_data like sodocchgi1,
            gd_error type sy-subrc.
    data:   it_message type standard table of SOLISTI1 initial size 0
                    with header line.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    Perform populate_message_table.
    *Send email message, although is not sent from SAP until mail send
    *program has been executed(rsconn01)
    PERFORM send_email_message.
    *Instructs mail send program for SAPCONNECT to send email(rsconn01)
    perform initiate_mail_execute_program.
    *&      Form  POPULATE_MESSAGE_TABLE
          Adds text to email text table
    form populate_message_table.
      Append 'Email line 1' to it_message.
      Append 'Email line 2' to it_message.
      Append 'Email line 3' to it_message.
      Append 'Email line 4' to it_message.
    endform.                    " POPULATE_MESSAGE_TABLE
    *&      Form  SEND_EMAIL_MESSAGE
          Send email message
    form send_email_message.
    Fill the document data.
      gd_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      gd_doc_data-obj_langu = sy-langu.
      gd_doc_data-obj_name  = 'SAPRPT'.
      gd_doc_data-obj_descr = psubject.
      gd_doc_data-sensitivty = 'F'.
    Describe the body of the message
      clear it_packing_list.
      refresh it_packing_list.
      it_packing_list-transf_bin = space.
      it_packing_list-head_start = 1.
      it_packing_list-head_num = 0.
      it_packing_list-body_start = 1.
      describe table it_message lines it_packing_list-body_num.
      it_packing_list-doc_type = 'RAW'.
      append it_packing_list.
    Add the recipients email address
      clear it_receivers.
      refresh it_receivers.
      it_receivers-receiver = p_email.
      it_receivers-rec_type = 'U'.
      it_receivers-com_type = 'INT'.
      it_receivers-notif_del = 'X'.
      it_receivers-notif_ndel = 'X'.
      append it_receivers.
    Call the FM to post the message to SAPMAIL
      call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           exporting
                document_data              = gd_doc_data
                put_in_outbox              = 'X'
           importing
                sent_to_all                = gd_sent_all
           tables
                packing_list               = it_packing_list
                contents_txt               = it_message
                receivers                  = it_receivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    Store function module return code
      gd_error = sy-subrc.
    Get it_receivers return code
      loop at it_receivers.
      endloop.
    endform.                    " SEND_EMAIL_MESSAGE
    *&      Form  INITIATE_MAIL_EXECUTE_PROGRAM
          Instructs mail send program for SAPCONNECT to send email.
    form initiate_mail_execute_program.
      wait up to 2 seconds.
      if gd_error eq 0.
          submit rsconn01 with mode = 'INT'
                        with output = 'X'
                        and return.
      endif.
    endform.                    " INITIATE_MAIL_EXECUTE_PROGRAM
    Regards,
    Jagadish

  • Is it possible to send mail with out giving password in javamail api?

    hi every one,
    i wrote a program to send a mail by using Java mail. In that i was providing username and password. its working fine,now because of some security issues i dont want to provide password in the application. is it possible in javamail to send a mail with giving the password?
    please help on this...
    thank you.

    JavaMail can certainly operate without a password, but the question is whether your server
    will let you send mail without a password. Chances are it won't.

  • Problem sending mail when out of town.

    So, I check in to the hotel w/ wifi and I receive mail but cannot send it. "Cannot send message using selected server" referring to my regular mail server. Gmail doesn't work nor does .mac even changing the port to 587.
    Are there any magic numbers I need to configure to accomodate this or is it just too bad.
    Thank you

    Do you have the authentication information filled in for the mail account? Open Mail preferences, click on Accounts icon in toolbar, click on Account Information tab. Click on the Server Settings button. Select Password authentication from the Authentication drop down menu. Fill in your email username and password.
    Some mail servers will not permit you to use them for sending mail when logged into another ISP account without authentication. Also be sure you are using the proper server for the mail account you are accessing, especially if you have multiple accounts and mail servers configured.

  • Send mail using cl_bcs. need text in mail body

    Hi friends,
    please provide me some solution to send mail with out attachment and the message should only be in mail body.
    Code :
    TRY.
    *     -------- create persistent send request ------------------------
            send_request = cl_bcs=>create_persistent( ).
    *     -------- create and set document -------------------------------
    *     create document from internal table with text
            CLEAR lv_const.
            CONCATENATE 'Dear' gs_cust-name1 ',' INTO lv_const SEPARATED BY space.
            APPEND lv_const TO text.
            CLEAR lv_const.
            CONCATENATE 'at' gs_cust-new_date 'planned delivery for you with following items:'
                        INTO lv_const SEPARATED BY space.
            APPEND lv_const TO text.
            l_space = '                                       ' .
            APPEND l_space TO text .
            CLEAR : gs_mat,
                    lv_const.
            CLEAR l_quan.
            LOOP AT gt_mat INTO gs_mat WHERE new_date = gs_cust-new_date.
              l_quan = gs_mat-zmeng.
              CONCATENATE gs_mat-matnr gs_mat-maktx l_quan INTO lv_const SEPARATED BY space.
              APPEND lv_const TO text.
              CLEAR :
                      lv_const.
            ENDLOOP.
            l_space = '                                       ' .
            APPEND l_space TO text .
            APPEND 'Please contact with us if you confirm whether above products are' TO text.
            CLEAR lv_const.
            CONCATENATE 'required on' gs_cust-new_date 'with specified quantity.'
                        INTO lv_const SEPARATED BY space .
            APPEND lv_const TO text.
            APPEND 'You can contact with us via e-mail:xxxxxx or via' TO text.
            APPEND 'phone +xxxxxxxxxxxxxx' TO text.
            l_space = '                                       ' .
            APPEND l_space TO text .
            APPEND 'Best regards' TO text.
            APPEND 'Linde Central Logistic Team' TO text.
            lo_document = cl_document_bcs=>create_document(
                            i_type    = 'RAW'
                            i_text    = text
    *                        i_length  = '12'
                            i_subject = 'test mail' ).
    *     add document to send request
            CALL METHOD send_request->set_document( lo_document ).
    *     --------- add recipient (e-mail address) -----------------------
    *     create recipient - please replace e-mail address !!!
            recipient = cl_cam_address_bcs=>create_internet_address(
                                              'address' ).
    *     add recipient with its respective attributes to send request
            CALL METHOD send_request->add_recipient
              EXPORTING
                i_recipient = recipient
                i_express   = 'X'.
    *     ---------- send document ---------------------------------------
              CALL METHOD send_request->send(
                EXPORTING
                  i_with_error_screen = 'X'
                RECEIVING
                  result              = sent_to_all ).
              COMMIT WORK.
    *  Send Immediately
              send_request->set_send_immediately( i_send_immediately = 'X' ).
          CATCH cx_bcs INTO bcs_exception.
            WRITE: text-001.
            WRITE: text-002, bcs_exception->error_type.
            EXIT.
        ENDTRY.
    Please provide me the solution if i am missing any thing.
    Thanks,
    Kat

    thank you for looking into this thread,
    i have configured the in scot.
    currently sending all RAW type as TXT. this has resolved my issues.

  • Sending Mail from Different Hot Spots/Internet Connections

    I'm trying to set up my Mac Mail to be able to send emails out from Mac Mail when I am using random Air Port connections, like at Starbucks Hot Spots and other Internet connections. I use POP3 to bring in my Yahoo Mail, but when I want to send mail back out at say a Starbucks, it doesn't work. I'm not sure how to set up my Mac Mail Preferences to enable that. Can anyone tell me how to do so? Someone set up my computer to do so in the past, but my hard drive died and I can't figure out how to do the Preferences to make it happen again.
    Thanks so much for any feedback.
    Andy
    G4 powerbook - OS 10.3.9

    Mail Help has some articles devoted to sending problems, e.g. "I can't send email" or "I can't send email because the connection to the server on port 25 timed out". You may want to take a look at them in case there is something there that applies to you. Something that usually works is changing the outgoing server port to 587 instead of 25.
    You may also need to go to System Preferences > Network > Show: Network Port Configurations, and make sure that the configuration used to connect to Internet appears at the top of the list. If this is different depending on your physical location, you can set up different "locations" in System Preferences > Network, to make it easier switching between network settings.

  • "This message cannot be sent at this time."  I have been getting this pop-up for 3 days when trying to send out mail.  I don't know what to do!  I cannot send mail from this account on any ISP. Please help!

    "This message cannot be sent at this time."  I have been getting this pop-up for 3 days when trying to send out mail.  I don't know what to do!  I cannot send mail from this account on any ISP. Please help!

    lots of people seem to be havgin a problem sending email from iCloud webmail.
    does your email address have uppercase characters in it?
    if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that

  • Print out as well as Sending mail of invoice

    Hi
    I have a requirement   in invoice like, i need print out as well as I need to send mail to the user.
    In T-code VF03 ,  My user will be giving only one  transaction medium as External send.
    But  he needs the print out of the invoice also. how can we arrive at the solution for this..
    Kindly send me reply .
    Regards
    Uma

    Hello Uma,
    Yes, it is possible.
    As you are aware, the medium will be selected as per the input:
    1     Print output
    2     Fax
    4     Telex
    5     External send
    6     EDI
    7     Simple Mail
    8     Special function
    9     Events (SAP Business Workflow)
    A     Distribution (ALE)
    If the user is selecting the Print output and he wants the same to be mailed, then add the logic to send the mail in the Z program.
    You can get the value for medium in the program with the NAST-NACHA structure.
    Please let me know if any more details are required.
    Regards,
    Selva K

  • Sender Mail Adapter configuration connection timed out

    Hi All,
    I am setting up a simple sender mail scenario to test if my mailadapter works.
    But I receive a error message in the Sender Communication Channel I receive this error:
    "exception caught during processing mail message; java.net.ConnectException: Connection timed out: connect"
    I tested File Sender to Mail Receiver Scenario it worked fine.
    But Sender Mail to File Receiver is not working and giving above exception.
    Mail Sender SetUp
    pop://xx.xxx.xx.xx
    In User and Password I have given my Lotus Notes Server user & password credentials
    Pls suggest

    HI Rachit,
    Have you seen the thread
    Sender Mail Adapter
    There it is mentioned that the Lotus notes mail id shoudl be POP3 enabled. Try doing that
    Regards
    Suraj

  • HT1277 I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it.

    I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it. This is the 1st time I've had this problem.
    slpmtns

    Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
    OS X 10.9 Mavericks
    OS X 10.8 Mountain Lion
    OS X 10.7 Lion
    OS X 10.6 Snow Leopard
    OS X 10.5 Leopard
    OS X 10.4 Tiger
    OS X 10.3 and earlier
    OS 9, OS 8 & System 7
    OS X Technologies
    OS X Server
    iPad
    iPhone
    iPod
    Other

  • I am not able to send mails through Yahoo APP.It gives me an error msg :"the sender address has ben rejected by the server ".I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.

    I am not able to send mails through Yahoo APP. It gives me an error msg :"the sender address has ben rejected by the server ".
    I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.
    So, i am not able to enter anything in fields under SMTP server settings

    You probably have changing settings disabled in Restrictions.

  • Can't send mail out of my iPad and iPhone using my office work mail account.

    I can't send mails out of my work mail account on IPad or iPhone. I usually get error message that the server does not accept relay messages. I only get this problem on IOS devices only but on other platform I don't . Please can anyone help fix this?

    Hi there Stonecold2323,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    -Griff W. 

Maybe you are looking for