SENDING MAIL, REGARDING CONTRACT INFORMATION TO MANAGER
HI ALL.
HERE I AM SENDING MY REQUIREMENT
MY CLIENT ASKING, IF EMPLOYEE FINISHES HIS/ HER CONTRACT ,THAT SHOULD GIVE PRIER INFORMATION TO HIS/HER MANAGER THROUGH MAIL GENERATION
FOR THIS WHAT ARE THE STEPS I SHOULD CONFIGURE.
Message was edited by: deviram tekumudi
Well just a suggestion, Why can't we use Dynamic actions for the same.
The structure cud be something like this,
IT Subtype Field Name SNo. Step Var.Function Part
0019 End of BVMRK 01 P P0019-BVMRK='2'
Contract
0019 End of BVMRK 01 M M0001
Contract
Conclusion to be drawn:
If any change occurs in the status of that particular task then automatically system will fwd a mail based on the settings we have maintained in the feature M0001.
Kindly correct me if iam wrong...awaiting reply.
Best reagrds,
Vaishali
Similar Messages
-
Hi, can someone explain me how can i put the <b>full content</b> of an itab in a attach and send it by mail?
Thk, RegardsHI,
Send email with attachment
Sending Mail
Sending Mail
Regards
Sudheer -
Can not send mail from Solution Manager
hi,
We try to send mail from Solution Manager workplace (SBWP). But when we try to send mail we get an error message "Address does not exist" .
Best RegardsHi,
If you have already configured SCOT,this can be an inconsistency. Please try to run the report: 'RSSODIAD'.
I hope it helps.
Regards,
Sam -
This question regarding sending mail from sap
hi to all,
this question regarding sending mail from sap
rt now iam able to send mails from 500 clint, what r the setting i need to do send mails from my another client 700,
iam using ecc 6.0 with sql database
regards,
krishna
Moderator message: FAQ, please search for available information before asking.
locked by: Thomas Zloch on Aug 16, 2010 2:11 PMhi to all,
this question regarding sending mail from sap
rt now iam able to send mails from 500 clint, what r the setting i need to do send mails from my another client 700,
iam using ecc 6.0 with sql database
regards,
krishna
Moderator message: FAQ, please search for available information before asking.
locked by: Thomas Zloch on Aug 16, 2010 2:11 PM -
How to retrieve client certificate information from sender mail adapter
Hi, expert:
I have a requirement to verify the validation of coming email with digital certification. The mail is with digital certification. If the coming email is valid, I 'll get the attachemt of the mail for further processing. I have a sender mail adapter and receiver file adapter configued.
I have already my own developed adapter module, which is configued in mail adapter. My question is how to retrieve the detailed certificate information in the adapter module developed by myself. Is it feasible?
Thanks a lot.The WL-Client-Proxy cert should be the cert used on the proxy side if SSL is configured between Apache and WebLogic, so I believe that is the reason why that does not work. Basically, the problem here is that SSL is end-to-end, and the two ends of this transaction are the client and apache.
That said, when you add the +ExportCertData option, this should record the client's SSL certificate in the vairable SSL_CLIENT_CERT. So you should be able to use request.getAttribute("SSL_CLIENT_CERT").
See:
http://www.modssl.org/docs/2.8/ssl_reference.html
If this doesn't work for you (which is possible if the WL_Proxy is doing something funny to the request), it is probably best just to dump out the entire contents of the session, and see what you have:
for (Enumeration e = request.getAttributeNames() ; e.hasMoreElements() ; ) {
String attr = (String)e.nextElement();
System.out.println("ATTR = " + attr);
System.out.println("VAL = " + request.getAttribute(attr));
If you can't see any SSL certificate there, you will have to work out some way to pass this on manually.
cheers,
Trevor -
Need some Guide regarding Configuration of Sender Mail Adapters....
Hellow All Members,
Can anybody refer me to some blogs other than SAP's own help which talks about use and configuration of sender mail adapters...
Thanks in Advance,
SugataHi Sugata,
These links i guess should help you understand clearly as to how to configure your sender mail adapter.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/frameset.htm">Configuring the Sender Mail Adapter</a>
<a href="/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure Adapter scenarios SAP Exchange Infrastructure</a>
<a href="/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address Adapter (XI) - how to implement dynamic mail address</a>
Also refer these links:
http://www.microsoft.com/exchange/evaluation/compare/ClientCompare.mspx
http://www.microsoft.com/exchange/evaluation/whatis.mspx
http://www.trincoll.edu/depts/cc/documentation/email/IMAP_vs_POP/default.htm
http://www.imap.org/papers/imap.vs.pop.brief.html
Also please go through these notes:
<b>804102</b>
xi 3.0 mail adapter with pop3 user authentication problem
<b>810238</b>
XI 3.0 Mail Adapter for POP3 may not report some errors
Just an additional info <b>"sender mail adapter is to convert e-mails to XI messages"</b>
Regards,
abhy -
Regarding error for sending mail
hello ,
i was trying to send mail in linux. i have activated all the services such as smtp,pop3, imap and all needed services. i am also successful to set up domain in linux and able to send mail through mozaria mail box.
but through code i face some problems. my program complies but at time of running it is giving null ptr exception.
my domail is email.simon.com
and also providing my code with this so if anybody has information then plz help and guid us
my code is
import java.util.*;
import javax.mail.*;
import javax.mail.internet.*;
public class Assimilator
public static void main(String[] args)
try
Properties props = new Properties();
props.put("mail.host","email.simon.com");
Session mailConnection = Session.getInstance(props,null);
Message msg = new MimeMessage(mailConnection);
Address from = new InternetAddress("[email protected]");
Address to = new InternetAddress("[email protected]");
msg.setContent("Hello! how are you?..........","text/plain");
msg.setFrom(from);
msg.setRecipient(Message.RecipientType.TO,to);
msg.setSubject("Trial");
Transport.send(msg);
System.out.println("good");
catch(Exception e)
e.printStackTrace();
waiting for repliesProbably here:Session mailConnection = Session.getInstance(props,null);I don't see the point of passing null for the Authenticator here. If you aren't going to authenticate then use the other getInstance method:Session mailConnection = Session.getInstance(props);
-
Hi all,
There is problem with odi send mail error, after the all suggestions, i get answer for it requires jython procedure, and i downloaded from oracle site also...
can any one please teach me where should need to implement/kept for sending mails.
please help me....
our network is popmail.bizmail.yahoo.com...
please share any docs/links to this mail id: [email protected]
Regards,
surya.Here are two ways to send an e-mail
1) Use the ODISendMail function in an ODI Package.
To use this function drag the ODISendMail reference onto the Package window, join it to the Package flow, click on the function icon and supply Mail Server (SMTP Server Name), From (Me), To (Distribution), CC (Copy), BCC (Blind Copy), Subject, Attachment, and Message Body in the window that appears.
I use this function to signal success or failure of a package or package step.
To do this I only supply only the Mail Server, From, To and Subject. I don't need anything else to report success or failure.
Here's a sample Subject:
<%=snpRef.getSession("CONTEXT_NAME")%> <%=snpRef.getSession( "SESS_NAME" )%> <%=snpRef.getStep("STEP_NAME")%>
The STEP_NAME holds the success/failure message
I don't use the Message Body or Attachment.
2) The procedure shown in the reply defines a Jython function to send an e-mail with Subject and Message Body using Mail Server, From and To values stored in a Jython dictionary. The Jython version is very old (release 2.1 or 2.2) so there are more elegant ways to write the function. Jython uses white space to control program flow which the Form editor deletes. Here's a verson of the code with leading periods in the code to preserve the white space and with comments on each line. Comments start with a # character and extend to the end of the line.
Dict = {} # This holds the global parameters
Dict['ToString'] = '[email protected]' # you supply the value
Dict['FromString'] = 'FromFromFrom' # you supply the value
Dict['SMTP'] = 'My Mail Server' # you supply the value
import smtplib #These are the Jython library routines needed to send the e-mail
def SendMail(MessageSubject,MessageLines): # This is the function definition
. global Dict # Point to the Dictionary
. Subject = '%s %s %s' % (Dict['Context'],Dict['Session'],MessageSubject) #Build the Subject Line
. MessageString = '' #Initialize the Message String
. for ReportLine in MessageLines: # Add the callers message lines to the Message String (each line here ends in a newline \n)
. MessageString = '%s%s' % (MessageString,ReportLine)
# The next statement builds the actual e-mail message according to a very strict format. Understanding the format is hard
. Message="From: %s\r\nTo: %s\r\nSubject: %s\r\n\r\n%s" % (Dict['FromString'],Dict['ToString'],Subject,MessageString)
. server = smtplib.SMTP(Dict['SMTP']) # Setup the Mail Server
. server.sendmail(Dict['FromString'],Dict['ToString'],Message) # Send The Message
. server.quit() # Stop
# Here we build a sample message
ReportSubject = 'This is a Test Message'
Report = []
Report.append('First Line\n')
Report.append('Second Line\n')
Report.append('Last Line\n')
# Send the Message
SendMail(ReportSubject,Report)
If you're not familiar with Jython, this still won't make much sense, but Jython is not hard to learn, and this example is not very complicated. -
Regarding sending mail as XLS attachment.
Hi SAP Gurus,
I am taken code from program "BCS_EXAMPLE_7" for sending mail with xls attachment.
I am using following code to send as copy .
L_RECIPIENT = CL_CAM_ADDRESS_BCS=>CREATE_INTERNET_ADDRESS( Email_ID ).
CALL METHOD SEND_REQUEST->ADD_RECIPIENT
EXPORTING
I_RECIPIENT = L_RECIPIENT
I_EXPRESS = 'X'
I_COPY = 'X'.
Now my requirement is to send to many mail to more than one ID as copy. how can I get that.
Please help.
Regards,
Pavan.Hi Pavan,
Please use do loop and add recipient in each loop.In below sample code change w_sender in each loop.
*do 2 times.*TRY.
lo_email = cl_bcs=>create_persistent( ).
lo_email_body = cl_document_bcs=>create_document(
i_type = 'txt'
i_text = it_message
i_subject = 'Message from Subba' ).
PERFORM add_attachment. " USING lo_email_body.
lo_email->set_document( lo_email_body ).
lo_receiver = cl_cam_address_bcs=>create_internet_address( w_sender ).
lo_email->add_recipient( i_recipient = lo_receiver
i_express = 'X' ).
lo_email->set_send_immediately( 'X' ).
lo_email->send( EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_send_result ).
WRITE: / 'Success flag:', lv_send_result.
COMMIT WORK.
CATCH cx_bcs INTO lx_exception.
WRITE:/ 'Message sending failed:', lx_exception->error_type.
ENDTRY.
*enddo.*
Thanks,
Subba -
Very urgent: query regarding sending mail frm infopackage
Hi all,
At InfoPackage level at menubar in systems option--->short message option is exists.
Can we use this option to send mail to client that infopackage has been successful or failure.
Please send me more detaily how can we send mail to any receipent.I am unable to work on this option please help me out.
Thanks & Regards,
PraveenaHi praveena,
if you want to send messages when the infopackage is successful, this can be done in the process chains.
Steps are as follows:
create process chain to include the Infopackage (IP) for which you want to send
message
Right click on the IP , create message. pop up will come asking you when the
message should be sent seolect when it is successful
Create variant for sending message and maintain the receipient list (email IDs)
with this you can send messages.
I hope this will help you.
Vijay. -
I am holidaying in Auckland using my daughter's Orcon internet account for sending mail but it will not send. I am sure I am putting in the correct information but it still says mail.orcon.net.nz(Offline). I have spent half an hour with Orcon putting in correct info. They do not know how to help me further and neither does telstra clear, my own internet provider.
Any advice appreciated.On the Mail menubar > Mailbox, make sure Take all accounts online is selected.
-
apple is not sending mail to my rescue email address so i cant proceed further regarding "changing my password or security question" ?????? help???
You are at least the second person to post the same thing today, so I don't know if there are problems with it. You clicked on the link to send reset info to your rescue email address as shown in steps 1 to 5 of the page that you posted from, and you've checked your spam folder as well as your Inbox ?
-
I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
Thanks
GIRITry this -> http://support.apple.com/kb/TA38632?viewlocale=en_US
-
Hi,
im working on sending report output as mail attachment in pdf format..
but im not getting the required output,,,i.e., even after entering email addresses in the selection screen....im not getting any mail to the respective mail-ids..
im pasting the code..pls fix the problem..
pls let me know wat we have to do in SCOT transaction after executing the program....pls respond ..pls ..
TABLES : t001, "COMPANY CODE
knb1, "CUSTOMER MASTER(COMPANY CODE)
cdhdr, "CHANGE DOCUMENT HEADER
knkk, "CUSTOMER MASTER CREDIT MANAGEMENT: CONTROL AREA DATA
kna1, "GENERAL DATA IN CUSTOMER MASTER
adrc, "ADDRESSES (BUSINESS ADDRESS SERVICES)
t001s, "ACCOUNTING CLERKS
adrt, "COMMUNICATION DATA TEXT (BUSINESS ADDRESS SERVICES)
adr6. "E-MAIL ADDRESSES (BUSINESS ADDRESS SERVICES)
TABLES: itcpo, "SAPscript output interface
itcpp. "SAPscript output parameters
TYPES: BEGIN OF y_t001,
bukrs TYPE bukrs,
kkber TYPE kkber,
adrnr TYPE adrnr,
END OF y_t001.
TYPES: BEGIN OF y_cust,
p_objectid TYPE cdobjectv,
END OF y_cust.
TYPES: BEGIN OF y_knkk,
kunnr TYPE kunnr,
kkber TYPE kkber,
dtrev TYPE dtrev_cm,
nxtrv TYPE nxtrv_cm,
klimk TYPE klimk,
dbwae TYPE dbwae_cm,
END OF y_knkk.
TYPES: BEGIN OF y_customer,
kunnr TYPE kunnr,
adrnr TYPE adrnr,
END OF y_customer.
TYPES: BEGIN OF y_custo ,
kunnr TYPE kunnr,
name TYPE name1_gp,
kkber TYPE kkber,
END OF y_custo.
TYPES: BEGIN OF y_knkk1,
kunnr LIKE knkk-kunnr,
dtrev LIKE knkk-dtrev,
nxtrv LIKE knkk-nxtrv,
klimk LIKE knkk-klimk,
END OF y_knkk1.
TYPES: BEGIN OF y_report_display,
kunnr TYPE kunnr,
name TYPE name1_gp,
dtrev TYPE dtrev_cm,
nxtrv TYPE nxtrv_cm,
klimk TYPE klimk,
dbwae TYPE dbwae_cm,
END OF y_report_display.
TYPES: BEGIN OF y_adrt,
addrnumber TYPE adrnr,
comm_type TYPE ad_comm,
remark TYPE ad_remark2,
persnumber TYPE ad_persnum,
date_from TYPE ad_date_fr,
consnumber TYPE ad_consnum,
smtp_addr TYPE ad_smtpadr,
END OF y_adrt.
*TYPES : BEGIN OF y_adr6,
addrnumber TYPE ad_addrnum,
persnumber TYPE ad_persnum,
date_from TYPE ad_date_fr,
consnumber TYPE ad_consnum,
smtp_addr TYPE ad_smtpadr,
END OF y_adr6.
*TYPES: BEGIN OF y_addr,
addrnumber TYPE adrnr,
name1 TYPE ad_name1,
postcode TYPE ad_pstcd1,
city1 TYPE ad_city1,
street TYPE ad_street,
housenum TYPE ad_hsnm1,
telnum TYPE ad_tlnmbr1,
faxnum TYPE ad_fxnmbr1,
END OF y_addr.
TYPES: BEGIN OF y_custnam,
adrnr TYPE adrnr,
name2 TYPE ad_name1,
END OF y_custnam.
TYPES: BEGIN OF y_kna1,
kunnr TYPE kunnr,
adrnr TYPE adrnr,
name1 TYPE name1,
END OF y_kna1.
TYPES: BEGIN OF y_knb1,
kunnr TYPE kunnr,
bukrs TYPE bukrs,
busab TYPE busab,
END OF y_knb1.
TYPES: BEGIN OF y_clv,
dtrev TYPE dtrev_cm,
nxtrv TYPE nxtrv_cm,
klimk TYPE klimk,
END OF y_clv.
TYPES: BEGIN OF y_ccname,
sname TYPE t001s-sname,
END OF y_ccname.
*TYPES DECLARATION FOR DESIGING SCRIPT
TYPES : BEGIN OF y_adrc,
addrnumber LIKE adrc-addrnumber,
name1 LIKE adrc-name1,
post_code1 LIKE adrc-post_code1,
city1 LIKE adrc-city1,
street LIKE adrc-street,
house_num1 LIKE adrc-house_num1,
tel_number LIKE adrc-tel_number,
nation LIKE adrc-nation ,
fax_number LIKE adrc-fax_number,
country LIKE adrc-country,
END OF y_adrc.
*TO GET C1 (CUSTOMER NAME IN RUSSIAN
TYPES : BEGIN OF y_adrc1,
addrnumber LIKE adrc-addrnumber,
name1 LIKE adrc-name1,
nation LIKE adrc-nation,
END OF y_adrc1.
*TO GET C7
TYPES :BEGIN OF y_t001s,
bukrs LIKE t001s-bukrs, "Company Code
busab LIKE t001s-busab,
sname LIKE t001s-sname,
END OF y_t001s.
CONSTANTS:
c_printer LIKE itcpp-tddevice VALUE 'PRINTER',
c_true(1) TYPE c VALUE 'X',
c_1(1) TYPE n VALUE '1',
c_pdf_format(3) TYPE c VALUE 'PDF',
c_u LIKE soos1-recesc VALUE 'U',
c_recipient_name LIKE soos1-recnam VALUE 'U-',
c_english LIKE sy-langu VALUE 'E',
c_f LIKE sood1-objsns VALUE 'F',
c_int(3) TYPE c VALUE 'INT',
c_main(4) TYPE c VALUE 'ITEM',
c_main_window(4) TYPE c VALUE 'MAIN',
c_header(6) TYPE c VALUE 'HEADER',
c_minus_sign(1) TYPE c VALUE '-',
c_document_type LIKE sood-objtp VALUE 'EXT',
c_space(1) TYPE c VALUE ' '.
DATA t_result LIKE itcpp.
DATA :w_t001 TYPE t001,
w_custo TYPE y_custo,
w_knkk TYPE y_knkk,
w_cust TYPE y_cust,
w_customer TYPE y_customer,
w_report_display TYPE y_report_display,
w_addr TYPE y_addr,
w_custnam TYPE y_custnam,
w_adrt TYPE y_adrt,
w_adr6 TYPE y_adr6,
w_kna1 TYPE y_kna1,
w_knb1 TYPE y_knb1,
w_clv TYPE y_clv,
w_ccname TYPE y_ccname.
DATA: w_error_found(1) TYPE c,
w_key_date_text(30) TYPE c,
w_total(10) TYPE p DECIMALS 2,
w_htddevice LIKE itcpp-tddevice.
DATA: E_PROFILE LIKE SOPRD.
DATA: t_t001 TYPE STANDARD TABLE OF y_t001,
t_custo TYPE STANDARD TABLE OF y_custo,
t_knkk TYPE STANDARD TABLE OF y_knkk,
t_cust TYPE STANDARD TABLE OF y_cust,
t_customer TYPE STANDARD TABLE OF y_customer,
t_report_display TYPE STANDARD TABLE OF y_report_display,
t_addr TYPE STANDARD TABLE OF y_addr,
t_custnam TYPE STANDARD TABLE OF y_custnam,
t_adrt TYPE STANDARD TABLE OF y_adrt,
t_adr6 TYPE STANDARD TABLE OF y_adr6,
t_kna1 TYPE STANDARD TABLE OF y_kna1,
t_knb1 TYPE STANDARD TABLE OF y_knb1,
t_clv TYPE STANDARD TABLE OF y_clv,
t_ccname TYPE STANDARD TABLE OF y_ccname.
DATA : number LIKE spell,
amount(1000) TYPE c.
For storing error log
DATA: BEGIN OF t_error OCCURS 0,
kunnr LIKE kna1-kunnr,
comm(30) TYPE c,
END OF t_error.
For storing customer's email address
DATA: BEGIN OF t_email OCCURS 0,
smtp_addr LIKE adr6-smtp_addr,
END OF t_email.
To be used in the function to send a layout via email
DATA: t_otfdata LIKE itcoo OCCURS 0 WITH HEADER LINE,
t_htline LIKE tline OCCURS 0 WITH HEADER LINE.
DATA DECLARATIONS FOR DESIGING SCRIPT
DATA : it_t001 TYPE STANDARD TABLE OF y_t001,
wa_t001 TYPE y_t001.
DATA : it_adrc TYPE STANDARD TABLE OF y_adrc,
wa_adrc type y_adrc.
DATA : it_adrc1 TYPE STANDARD TABLE OF y_adrc1,
wa_adrc1 TYPE y_adrc1.
DATA : it_knb1 TYPE STANDARD TABLE OF y_knb1,
wa_knb1 TYPE y_knb1.
DATA : it_kna1 TYPE STANDARD TABLE OF y_kna1,
wa_kna1 TYPE y_kna1.
DATA : it_knkk TYPE STANDARD TABLE OF y_knkk,
wa_knkk TYPE y_knkk.
DATA : it_knkk1 TYPE STANDARD TABLE OF y_knkk1,
wa_knkk1 TYPE y_knkk1.
DATA : it_t001s TYPE STANDARD TABLE OF y_t001s,
wa_t001s TYPE y_t001s.
*DATA STATEMENTS FOR EMAIL ADDRESSES
DATA : it_adrt TYPE TABLE OF y_adrt,
wa_adrt TYPE y_adrt,
wa_email LIKE t_email.
*DATA : it_adr6 TYPE TABLE OF y_adr6,
wa_adr6 TYPE y_adr6,
DATA : counter TYPE i,
counter1 TYPE i,
c5 LIKE spell.
SELECTION-SCREEN BEGIN OF BLOCK clcn WITH FRAME TITLE text-200.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bukrs LIKE t001-bukrs OBLIGATORY, "COMPANY CODE
p_kkber LIKE t001-kkber OBLIGATORY. "CREDIT CONTROL AREA
SELECT-OPTIONS: s_kunnr FOR knb1-kunnr OBLIGATORY, "CUSTOMER NUMBER
s_datum FOR sy-datum OBLIGATORY DEFAULT sy-datum. "DATE OF CREDIT LIMIT UPDATE
SELECTION-SCREEN SKIP.
PARAMETERS : p_simul AS CHECKBOX DEFAULT 'X'. "RUN IN SIMULATION MODE
SELECTION-SCREEN SKIP.
PARAMETERS : p_lemail LIKE adr6-smtp_addr. " EMAIL
SELECTION-SCREEN END OF BLOCK clcn.
AT SELECTION-SCREEN.
PERFORM f0100_validate_bukrs. "* For Company Code.
PERFORM f0200_validate_kkber. "* For Credit Control Area.
PERFORM f0300_validate_kunnr. "* For Customer Number
PERFORM f0400_validate_datum. "* For Date of Credit Limit Update
PERFORM f0500_validate_simul. "* For simulation mode and e-mail address
*======================================================================
START-OF-SELECTION.
PERFORM f1000_get_customer. "** COLLECT INFO FOR REPORT DISPLAY
IF p_simul is initial AND NOT P_lemail IS INITIAL.
PERFORM F1000_CHECK_GATEWAY_CONNECTION.
ENDIF.
IF p_simul IS INITIAL AND NOT p_lemail IS INITIAL.
PERFORM f3000_process_data_script USING t_report_display.
ENDIF.
END-OF-SELECTION.
IF NOT p_simul IS INITIAL.
PERFORM f2000_display_customer USING t_report_display.
ENDIF.
FORM f0100_validate_bukrs.
DATA : w_bukrs TYPE bukrs.
VALIDATION OF P_BUKRS
SELECT SINGLE bukrs
FROM t001
INTO w_bukrs
WHERE bukrs EQ p_bukrs.
IF sy-subrc NE 0.
MESSAGE e999(zf) WITH 'Invalid Company Code' p_bukrs. "(E01).
*AUTHORIZATION CHECK
AUTHORITY-CHECK OBJECT 'F_BKPF_BUK'
ID 'BUKRS' FIELD p_bukrs
ID 'ACTVT' FIELD '03'.
IF sy-subrc NE 0.
MESSAGE e999(zf) WITH 'No Authorization for company code' p_bukrs."(e06).
ENDIF.
ENDIF.
ENDFORM. " F0100_VALIDATE_BUKRS
*Eject
*& Form F0200_VALIDATE_KKBER
*-> CREDIT CONTROL AREA AUTHORITY CHECK
FOR CREDIT CONTROL AREA.
FORM f0200_validate_kkber.
DATA : w_kkber LIKE t001-kkber.
SELECT SINGLE kkber
FROM t001
INTO w_kkber
WHERE bukrs EQ p_bukrs
AND kkber EQ p_kkber.
IF sy-subrc NE 0.
MESSAGE e999(zf) WITH
'Credit Control Area' p_kkber 'not defined for Company Code' p_bukrs."(e02).
MESSAGE e999 WITH text-e02 p_kkber .
ENDIF.
ENDFORM. "F0200_VALIDATE_KKBER
*& Form F0300_VALIDATE_KUNNR
*-> CUSTOMER NUMBER AUTHORITY CHECK
FORM f0300_validate_kunnr.
VALIDATION OF S_KUNNR
DATA : w_kunnr TYPE kunnr,
w_bukrs TYPE bukrs.
IF s_kunnr IS INITIAL .
MESSAGE e999 WITH 'Enter Customer Number'(e04).
SUBMIT (sy-cprog) VIA SELECTION-SCREEN.
ENDIF.
LOOP AT s_kunnr.
CLEAR : w_kunnr,
w_bukrs.
IF NOT s_kunnr-low IS INITIAL.
SELECT SINGLE kunnr bukrs
FROM knb1 INTO (w_kunnr ,w_bukrs)
WHERE kunnr EQ s_kunnr-low
AND bukrs EQ p_bukrs.
IF sy-subrc NE 0.
MESSAGE e999(zf) WITH 'Customer S_KUNNR-LOW not defined in company code' p_bukrs."(e03).
ENDIF.
ENDIF. "if not s_kunnr-low is initial.
IF NOT s_kunnr-high IS INITIAL.
CLEAR : w_kunnr,
w_bukrs.
SELECT SINGLE kunnr bukrs
FROM knb1 INTO (w_kunnr , w_bukrs)
WHERE kunnr EQ s_kunnr-high
AND bukrs EQ p_bukrs.
IF sy-subrc NE 0.
MESSAGE e999(zf) WITH 'Customer S_KUNNR-HIGH not defined in company code' p_bukrs."(e03).
ENDIF.
ENDIF. "if not s_kunnr-high is initial.
ENDLOOP. " loop at s_kunnr
ENDFORM. " F0200_VALIDATE_KUNNR
*& Form F0400_VALIDATE_DATUM
*-> DATE OF CREDIT LIMIT UPDATE
FORM f0400_validate_datum.
IF s_kunnr IS INITIAL AND s_datum IS INITIAL.
MESSAGE e999 WITH 'Enter either Date of CL update or Customer number.'(e04).
ENDIF.
ENDFORM. "F0400_VALIDATE_DATUM
*& Form F1000_GET_CUSTOMER
text
--> p1 text
<-- p2 text
FORM f1000_get_customer .
DATA : w_kunnr LIKE knkk-kunnr,
w_kkber LIKE knkk-kkber.
IF s_datum IS NOT INITIAL.
SELECT objectid
FROM cdhdr
INTO TABLE t_cust
WHERE objectclas IN ('KLIM','DTREV','NXTRV')
AND change_ind IN ('U','I')
AND udate IN s_datum.
WHERE ( objectclas EQ 'KLIM' OR objectclas EQ 'DTREV' OR objectclas EQ 'NXTRV')
AND ( change_ind EQ 'U' OR change_ind EQ 'I')
AND udate IN s_datum .
ENDIF.
IF sy-subrc NE 0.
MESSAGE s999 WITH 'There is no data for selected period'(e07).
ELSE.
MOVE t_cust TO t_customer.
ENDIF.
SORT t_customer BY kunnr.
IF NOT t_customer[] IS INITIAL.
SELECT kunnr
kkber
dtrev
nxtrv
klimk
dbwae
FROM knkk
INTO TABLE t_knkk
FOR ALL ENTRIES IN t_customer
WHERE kunnr = t_customer-kunnr
AND kkber = p_kkber.
ELSE.
MESSAGE e999 WITH text-e07.
ENDIF.
IF sy-subrc NE 0.
ENDIF.
SORT t_knkk BY kunnr kkber.
IF NOT t_knkk[] IS INITIAL.
SELECT kunnr
name1
FROM kna1
INTO TABLE t_custo
FOR ALL ENTRIES IN t_knkk
WHERE kunnr = t_knkk-kunnr.
ENDIF.
IF sy-subrc = 0.
ENDIF.
SORT t_custo BY kunnr kkber.
LOOP AT t_custo INTO w_custo.
CLEAR w_knkk.
READ TABLE t_knkk INTO w_knkk WITH KEY kunnr = w_custo-kunnr
BINARY SEARCH.
IF sy-subrc = 0.
w_report_display-kunnr = w_custo-kunnr.
w_report_display-name = w_custo-name.
w_report_display-dtrev = w_knkk-dtrev.
w_report_display-nxtrv = w_knkk-nxtrv.
w_report_display-klimk = w_knkk-klimk.
w_report_display-dbwae = w_knkk-dbwae.
APPEND w_report_display TO t_report_display .
ENDIF.
ENDLOOP.
ENDFORM. " F1000_GET_CUSTOMER
*& Form F2000_DISPLAY_CUSTOMER
text
-->P_T_REPORT_DISPLAY text
FORM f2000_display_customer USING p_t_report_display.
DATA: no TYPE n VALUE 1.
DATA: t_data TYPE STANDARD TABLE OF y_report_display.
t_data = p_t_report_display.
DATA : w_data LIKE LINE OF t_data .
ULINE (118).
WRITE:/ sy-vline,
8 'CREDIT LIMIT CHANGE NOTIFICATION REPORT ON',
sy-datum , 118 sy-vline.
ULINE (118).
WRITE:/ sy-vline,'NO'(008) ,
10 sy-vline, 11 'CUSTOMER NUMBER',
28 sy-vline, 29 'CUSTOMER NAME', 43 sy-vline,
44 'CREDIT LIMIT VALID', 63 sy-vline ,
64 'CREDIT LIMIT AMOUNT', 85 sy-vline, 86 'CURRENCY',
95 sy-vline , 96 'Notification Status',118 sy-vline.
ULINE (118).
WRITE:/ sy-vline,43 sy-vline, 44 'FROM', 53 sy-vline,
56 'TILL', 63 sy-vline, 118 sy-vline .
ULINE (118).
LOOP AT t_data INTO w_data.
WRITE:/ sy-vline, no,
10 sy-vline, 11 w_data-kunnr ,
28 sy-vline, 29 w_data-name, 43 sy-vline, 44 w_data-dtrev,
53 sy-vline, 56 w_data-nxtrv ,63 sy-vline ,64 w_data-klimk,
85 sy-vline, 86 w_data-dbwae,
95 sy-vline , 118 sy-vline.
no = no + 1.
ULINE (118).
ENDLOOP.
ENDFORM. " F2000_DISPLAY_CUSTOMER
*& Form F3000_PROCESS_DATA_SCRIPT
text
-->P_T_REPORT_DISPLAY text
FORM f3000_process_data_script USING p_t_report_display.
DATA: t_data TYPE STANDARD TABLE OF y_report_display.
t_data = p_t_report_display.
DATA : w_data LIKE LINE OF t_data .
DATA: temp_is_negative(1) TYPE c,
temp_text(20) TYPE c,
temp_sname LIKE t001s-sname,
temp_email LIKE adr6-smtp_addr.
DATA : number LIKE spell,
amount(255) TYPE c.
PERFORM f3100_initialize_settings.
LOOP AT t_data INTO w_data.
AT NEW kunnr.
CLEAR w_error_found.
IF p_simul IS INITIAL AND NOT p_lemail IS INITIAL.
PERFORM f3300_open_form.
data: wa_t001 like line of t001
DATA : begin of wa_t001,
adrnr like t001-adrnr,
end of wa_t001.
SELECT SINGLE
adrnr FROM t001 INTO wa_t001
WHERE bukrs = p_bukrs.
DATA: BEGIN OF wa_adrc,
addrnumber LIKE adrc-addrnumber,
name1 LIKE adrc-name1,
post_code1 LIKE adrc-post_code1,
city1 LIKE adrc-city1,
street LIKE adrc-street,
house_num1 LIKE adrc-house_num1,
tel_number LIKE adrc-tel_number,
nation LIKE adrc-nation ,
fax_number LIKE adrc-fax_number,
country LIKE adrc-country,
END OF wa_adrc.
SELECT SINGLE
addrnumber
name1
post_code1
city1
street
house_num1
tel_number
nation
fax_number
country
FROM adrc
INTO corresponding fields of wa_adrc
WHERE addrnumber EQ wa_t001-adrnr AND
nation EQ ' '.
PERFORM f3700_write_form.
DATA: wa_kna1 LIKE LINE OF t_kna1,
wa_adrcc LIKE LINE OF it_adrc.
SELECT SINGLE
kunnr
adrnr FROM kna1
INTO wa_kna1
WHERE kunnr = w_data-kunnr.
IF sy-subrc EQ 0.
SELECT SINGLE
addrnumber
name1
FROM adrc
INTO wa_adrcc
WHERE addrnumber = wa_kna1-adrnr
AND nation = ' '.
ENDIF.
PERFORM f3701_write_form.
DATA : wa_knkk LIKE LINE OF t_knkk.
DATA : counter TYPE i,
counter1 TYPE i.
IF sy-subrc EQ 0.
SELECT SINGLE KUNNR
DTREV
NXTRV
KLIMK FROM KNKK INTO WA_KNKK WHERE
KUNNR EQ W_DATA-KUNNR.
ENDIF.
CALL FUNCTION 'SPELL_AMOUNT'
EXPORTING
amount = w_knkk-klimk
CURRENCY = ' '
FILLER = ' '
language = sy-langu
IMPORTING
in_words = number.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
amount = number-word.
PERFORM f3702_write_form.
DATA: wa_knb1 LIKE LINE OF t_knb1.
IF sy-subrc EQ 0.
SELECT SINGLE
busab
FROM knb1
INTO wa_knb1
WHERE kunnr = w_data-kunnr
AND bukrs = p_bukrs.
ENDIF.
DATA : wa_t001s LIKE LINE OF it_t001s.
IF sy-subrc EQ 0.
SELECT SINGLE bukrs
busab
sname
FROM t001s
INTO wa_t001s
WHERE bukrs = wa_knb1-bukrs
AND busab = wa_knb1-busab.
ENDIF.
PERFORM f3703_write_form.
PERFORM f3704_write_form.
IF counter1 < counter.
PERFORM f3705_write_form.
ENDIF.
PERFORM f3706_close_form.
ENDIF.
ENDAT.
IF w_error_found EQ c_true.
ENDIF.
AT END OF kunnr.
PERFORM F3400_WRITE_FORM USING C_TOTAL C_MAIN_WINDOW.
PERFORM F3500_CLOSE_FORM.
IF p_simul IS INITIAL AND NOT p_lemail IS INITIAL. "Email setting
PERFORM f3200_get_email_addr USING w_data-kunnr.
PERFORM f3600_send_data_via_email USING w_data-kunnr.
ENDIF.
ENDAT.
ENDLOOP.
WRITE:/ ' E-Mail is sent to the customer'.
ENDFORM. " F3000_PROCESS_DATA_SCRIPT
*& Form F3100_INITIALIZE_SETTINGS
text
--> p1 text
<-- p2 text
FORM f3100_initialize_settings .
SELECT SINGLE spld
INTO itcpo-tddest
FROM usr01
WHERE bname EQ sy-uname.
IF sy-subrc NE 0.
itcpo-tddest = 'LOCAL'.
ENDIF.
w_htddevice = c_printer.
itcpo-tddest = ''.
itcpo-tdrdidev = ''.
itcpo-tdsenddate = sy-datum.
itcpo-tdsendtime = sy-uzeit.
itcpo-tdschedule = 'IMM'.
itcpo-tdimmed = ' '.
itcpo-tdnewid = c_true. "PRINT: New spool request
itcpo-tdlifetime = c_1. "PRINT: Spool retention period
itcpo-tdgetotf = c_true.
IF p_simul IS INITIAL AND NOT p_lemail IS INITIAL. "Email setting
itcpo-tdgetotf = c_true.
ENDIF.
ENDFORM. " F3100_INITIALIZE_SETTINGS
*& Form f0500_validate_simul
text
--> p1 text
<-- p2 text
FORM f0500_validate_simul .
IF p_simul IS INITIAL AND p_lemail IS INITIAL. "Email setting
MESSAGE e999(zf) WITH 'Enter Email address'. "(e05).
ENDIF.
ENDFORM. " f0500_validate_simul
*& Form F3600_SEND_DATA_VIA_EMAIL
text
-->P_W_DATA_KUNNR text
FORM f3600_send_data_via_email USING p_w_data_kunnr.
DATA: fle1(2) TYPE p,
fle2(2) TYPE p,
off1 TYPE p,
hltlines TYPE i,
temp_filesize TYPE i,
hfeld(500) TYPE c,
header(50) TYPE c,
htabix LIKE sy-tabix,
x_sent_to_all LIKE sonv-flag.
DATA: BEGIN OF x_objcont OCCURS 0.
INCLUDE STRUCTURE soli.
INCLUDE STRUCTURE SOLISTI1.
DATA: END OF x_objcont.
DATA: BEGIN OF x_object_hd_change.
INCLUDE STRUCTURE sood1.
DATA: END OF x_object_hd_change.
DATA: BEGIN OF x_receivers OCCURS 0.
INCLUDE STRUCTURE soos1.
INCLUDE STRUCTURE SOMLRECI1.
DATA: END OF x_receivers.
DATA: BEGIN OF x_objhead OCCURS 1.
INCLUDE STRUCTURE soli.
DATA: END OF x_objhead.
**Data: begin of objpack occurs 0.
include structure SOPCKLSTI1.
**Data: end of objpack.
**Data: begin of email_data occurs 0.
include structure SODOCCHGI1.
**Data: end of email_data.
Converts the layout set to PDF format
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = c_pdf_format
IMPORTING
bin_filesize = temp_filesize
TABLES
otf = t_otfdata
lines = t_htline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc NE 0.
w_error_found = c_true.
t_error-kunnr = p_w_data_kunnr.
t_error-comm = 'Error in conversion to PDF format.'(e08).
APPEND t_error.
CLEAR t_error.
EXIT.
ENDIF.
Convert the PDF file into an internal table which to be used in the
function that will send a PDF file to a email address
DESCRIBE TABLE t_htline LINES hltlines.
DESCRIBE FIELD T_HTLINE LENGTH FLE1 IN BYTE MODE.
DESCRIBE FIELD t_htline LENGTH fle1
IN CHARACTER MODE.
DESCRIBE FIELD X_OBJCONT LENGTH FLE2 IN BYTE MODE.
DESCRIBE FIELD x_objcont LENGTH fle2
IN CHARACTER MODE.
CLEAR x_objcont.
REFRESH x_objcont.
LOOP AT t_htline.
htabix = sy-tabix.
MOVE t_htline TO hfeld+off1.
IF htabix = hltlines.
fle1 = STRLEN( t_htline ).
ENDIF.
off1 = off1 + fle1.
IF off1 GE fle2.
CLEAR x_objcont.
x_objcont = hfeld(fle2).
APPEND x_objcont.
SHIFT hfeld BY fle2 PLACES.
off1 = off1 - fle2.
ENDIF.
IF htabix = hltlines.
IF off1 GT 0.
CLEAR x_objcont.
x_objcont = hfeld(off1).
APPEND x_objcont.
ENDIF.
ENDIF.
ENDLOOP.
LOOP AT t_email.
x_receivers-receiver = t_email-smtp_addr.
x_receivers-rec_type = c_u.
APPEND x_receivers.
ENDLOOP.
x_receivers-receiver = p_lemail.
x_receivers-rec_type = c_u.
APPEND x_receivers.
DESCRIBE TABLE x_objcont LINES sy-tfill.
READ TABLE x_objcont INDEX sy-tfill.
email_data-doc_size = ( sy-tfill - 1 ) * 255 + STRLEN( x_objcont ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = sy-tfill.
objpack-doc_type = 'RAW'.
APPEND objpack.
email_data-obj_descr = 'Notification'.
APPEND email_data.
IF x_receivers[] IS NOT INITIAL.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = email_data
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
TABLES
packing_list = objpack
object_header = email_fname
contents_bin = email_text
contents_txt = x_objcont
receivers = x_receivers.
endif.
CLEAR x_objhead.
REFRESH x_objhead.
CLEAR x_object_hd_change.
x_object_hd_change-objnam = 'EMAIL'(t04).
header = 'Procter & Gamble'(t05).
x_object_hd_change-objdes = header. "Title
x_object_hd_change-objla = c_english. "Language
x_object_hd_change-objsns = c_f.
x_object_hd_change-objlen = temp_filesize.
x_object_hd_change-file_ext = c_pdf_format.
Transfer the email address to an internal table which will be used
in the function that will send a PDF file to a email address
CLEAR x_receivers.
REFRESH x_receivers.
LOOP AT t_email.
x_receivers-sndex = c_true.
x_receivers-sndpri = c_1.
x_receivers-recesc = c_u.
x_receivers-recnam = c_recipient_name.
Populate the email address of the customer
x_receivers-recextnam = t_email-smtp_addr.
x_receivers-recesc = c_english.
x_receivers-sndart = c_int.
APPEND x_receivers.
ENDLOOP.
x_receivers-sndex = c_true.
x_receivers-sndpri = c_1.
x_receivers-recesc = c_u.
x_receivers-recnam = c_recipient_name.
Populate the Local mail address
x_receivers-recextnam = p_lemail.
x_receivers-recesc = c_english.
x_receivers-sndart = c_int.
APPEND x_receivers.
Calling a SAP function to send out email with attachment of PDF file
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = x_object_hd_change
object_type = c_document_type
outbox_flag = c_true
IMPORTING
sent_to_all = x_sent_to_all
TABLES
objcont = x_objcont
objhead = x_objhead
receivers = x_receivers
EXCEPTIONS
active_user_not_exist = 1
communication_failure = 2
component_not_available = 3
folder_not_exist = 4
folder_no_authorization = 5
forwarder_not_exist = 6
note_not_exist = 7
object_not_exist = 8
object_not_sent = 9
object_no_authorization = 10
object_type_not_exist = 11
operation_no_authorization = 12
owner_not_exist = 13
parameter_error = 14
substitute_not_active = 15
substitute_not_defined = 16
system_failure = 17
too_much_receivers = 18
user_not_exist = 19
x_error = 20
OTHERS = 21.
IF sy-subrc NE 0.
w_error_found = c_true.
t_error-kunnr = p_w_data_kunnr.
t_error-comm = 'Error in sending email.'(e09).
APPEND t_error.
CLEAR t_error.
ELSEIF sy-subrc EQ 0.
COMMIT WORK.
*Transmit Mail
SUBMIT rsconn01 WITH mode = c_int
WITH output = c_space
AND RETURN.
ENDIF.
ENDFORM. " F3600_SEND_DATA_VIA_EMAIL
*& Form F3200_GET_EMAIL_ADDR
text
-->P_T_REPORT_DISPLAY text
FORM f3200_get_email_addr USING p_w_data_kunnr.
REFRESH t_customer.
REFRESH t_adrt.
REFRESH t_email.
DATA: t_data TYPE STANDARD TABLE OF y_report_display.
t_data = p_t_report_display.
DATA : w_data LIKE LINE OF t_data .Sending mail with attachment
This program will allowed you to send email with attachment.
First, specify the attachment file from your local hardisk and execute.
Next, specify the sender email address and click the send button.
report y_cr17_mail.
data method1 like sy-ucomm.
data g_user like soudnamei1.
data g_user_data like soudatai1.
data g_owner like soud-usrnam.
data g_receipients like soos1 occurs 0 with header line.
data g_document like sood4 .
data g_header like sood2.
data g_folmam like sofm2.
data g_objcnt like soli occurs 0 with header line.
data g_objhead like soli occurs 0 with header line.
data g_objpara like selc occurs 0 with header line.
data g_objparb like soop1 occurs 0 with header line.
data g_attachments like sood5 occurs 0 with header line.
data g_references like soxrl occurs 0 with header line.
data g_authority like sofa-usracc.
data g_ref_document like sood4.
data g_new_parent like soodk.
data: begin of g_files occurs 10 ,
text(4096) type c,
end of g_files.
data : fold_number(12) type c,
fold_yr(2) type c,
fold_type(3) type c.
parameters ws_file(4096) type c default 'c:\debugger.txt'.
Can me any file fromyour pc ....either xls or word or ppt etc ...
g_user-sapname = sy-uname.
call function 'SO_USER_READ_API1'
exporting
user = g_user
PREPARE_FOR_FOLDER_ACCESS = ' '
importing
user_data = g_user_data
EXCEPTIONS
USER_NOT_EXIST = 1
PARAMETER_ERROR = 2
X_ERROR = 3
OTHERS = 4
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
fold_type = g_user_data-outboxfol+0(3).
fold_yr = g_user_data-outboxfol+3(2).
fold_number = g_user_data-outboxfol+5(12).
clear g_files.
refresh : g_objcnt,
g_objhead,
g_objpara,
g_objparb,
g_receipients,
g_attachments,
g_references,
g_files.
method1 = 'SAVE'.
g_document-foltp = fold_type.
g_document-folyr = fold_yr.
g_document-folno = fold_number.
g_document-objtp = g_user_data-object_typ.
*g_document-OBJYR = '27'.
*g_document-OBJNO = '000000002365'.
*g_document-OBJNAM = 'MESSAGE'.
g_document-objdes = 'sap-img.com testing by program'.
g_document-folrg = 'O'.
*g_document-okcode = 'CHNG'.
g_document-objlen = '0'.
g_document-file_ext = 'TXT'.
g_header-objdes = 'sap-img.com testing by program'.
g_header-file_ext = 'TXT'.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = sy-uname
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
FOLMEM_DATA =
RECEIVE_DATA =
File from the pc to send...
method1 = 'ATTCREATEFROMPC'.
g_files-text = ws_file.
append g_files.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
method1 = 'SEND'.
g_receipients-recnam = 'MK085'.
g_receipients-recesc = 'B'.
g_receipients-sndex = 'X'.
append g_receipients.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header.
*-- End of Program
also try this one for background scheduling the same
Sending mail with attachment report in Background
Pay attention because its working with output list from spool converted to pdf.
=================================================================================
z_send_email_fax_global
FUNCTION-POOL z_gfaian_mail_fax. MESSAGE-ID ..
WORK TABLE AREAS
TABLES: tsp01.
INTERNAL TABLES
DATA: lt_rec_tab LIKE STANDARD TABLE OF soos1 WITH HEADER LINE,
lt_note_text LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_attachments LIKE STANDARD TABLE OF sood5 WITH HEADER LINE.
DATA: lt_objcont LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_objhead LIKE STANDARD TABLE OF soli WITH HEADER LINE.
DATA: pdf_format LIKE STANDARD TABLE OF tline WITH HEADER LINE.
TYPES: BEGIN OF y_files,
file(60) TYPE c,
END OF y_files.
DATA: lt_files TYPE STANDARD TABLE OF y_files WITH HEADER LINE.
DATA: l_objcont LIKE soli OCCURS 0 WITH HEADER LINE.
DATA: l_objhead LIKE soli OCCURS 0 WITH HEADER LINE.
STRUCTURES
DATA: folder_id LIKE soodk,
object_id LIKE soodk,
link_folder_id LIKE soodk,
g_document LIKE sood4,
g_header_data LIKE sood2,
g_folmem_data LIKE sofm2,
g_header_data LIKE sood2,
g_receive_data LIKE soos6,
g_ref_document LIKE sood4,
g_new_parent LIKE soodk,
l_folder_id LIKE sofdk,
v_email(50).
DATA: hd_dat like sood1.
VARIABLES
DATA: client LIKE tst01-dclient,
name LIKE tst01-dname,
objtype LIKE rststype-type,
type LIKE rststype-type.
DATA: numbytes TYPE i,
arc_idx LIKE toa_dara,
pdfspoolid LIKE tsp01-rqident,
jobname LIKE tbtcjob-jobname,
jobcount LIKE tbtcjob-jobcount,
is_otf.
DATA: outbox_flag LIKE sonv-flag VALUE X,
store_flag LIKE sonv-flag,
delete_flag LIKE sonv-flag,
owner LIKE soud-usrnam,
on LIKE sonv-flag VALUE X,
sent_to_all LIKE sonv-flag,
g_authority LIKE sofa-usracc,
w_objdes LIKE sood4-objdes.
DATA: c_file LIKE rlgrap-filename,
n_spool(6) TYPE n.
DATA: cancel.
DATA: desired_type LIKE sood-objtp,
real_type LIKE sood-objtp,
attach_type LIKE sood-objtp,
otf LIKE sood-objtp VALUE OTF, SAPscript Ausgabeformat
ali LIKE sood-objtp VALUE ALI. ABAP lists
CONSTANTS
CONSTANTS: ou_fol LIKE sofh-folrg VALUE O,
c_objtp LIKE g_document-objtp VALUE RAW,
c_file_ext LIKE g_document-file_ext VALUE TXT.
=================================================================================
z_send_email_fax2
FUNCTION z_faian_mail_fax2.
Interface local:
* IMPORTING
* REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
* REFERENCE(FAX_MAIL_NUMBER) TYPE SO_NAME
* REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
* REFERENCE(OBJECT_TYPE) TYPE SO_ESCAPE
* TABLES
* LT_BODY_EMAIL STRUCTURE SOLI
* EXCEPTIONS
* ERR_NO_ABAP_SPOOLJOB
Fist part: Verify if the spool really exists
SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
IF sy-subrc NE 0.
RAISE err_no_abap_spooljob. doesnt exist
ELSE.
client = tsp01-rqclient.
name = tsp01-rqo1name.
CALL FUNCTION RSTS_GET_ATTRIBUTES
EXPORTING
authority = SP01′
client = client
name = name
part = 1
IMPORTING
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF objtype(3) = OTF.
desired_type = otf.
ELSE.
desired_type = ali.
ENDIF.
CALL FUNCTION RSPO_RETURN_SPOOLJOB
EXPORTING
rqident = src_spoolid
desired_type = desired_type
IMPORTING
real_type = real_type
TABLES
buffer = l_objcont
EXCEPTIONS
no_such_job = 14
type_no_match = 94
job_contains_no_data = 54
no_permission = 21
can_not_access = 21
read_error = 54.
IF sy-subrc EQ 0.
attach_type = real_type.
ENDIF.
CALL FUNCTION SO_FOLDER_ROOT_ID_GET
EXPORTING
owner = sy-uname
region = ou_fol
IMPORTING
folder_id = l_folder_id
EXCEPTIONS
OTHERS = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp = l_folder_id-foltp.
g_document-folyr = l_folder_id-folyr.
g_document-folno = l_folder_id-folno.
g_document-objtp = c_objtp.
g_document-objdes = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes = header_mail.
CALL FUNCTION SO_DOCUMENT_REPOSITORY_MANAGER
EXPORTING
method = SAVE
office_user = sy-uname
IMPORTING
authority = g_authority
TABLES
objcont = lt_body_email
attachments = lt_attachments
CHANGING
document = g_document
header_data = g_header_data
EXCEPTIONS
OTHERS = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
CLEAR lt_rec_tab.
lt_rec_tab-sel = X.
lt_rec_tab-recesc = object_type. This field for FAX/MAIL
lt_rec_tab-recnam = U-.
lt_rec_tab-deliver = X.
lt_rec_tab-not_deli = X.
lt_rec_tab-read = X.
lt_rec_tab-mailstatus = E.
lt_rec_tab-adr_name = fax_mail_number.
lt_rec_tab-sortfield = fax_mail_number.
lt_rec_tab-recextnam = fax_mail_number.
lt_rec_tab-sortclass = 5′.
APPEND lt_rec_tab.
lt_rec_tab-recextnam = fax_mail_number.
lt_rec_tab-recesc = object_type.
lt_rec_tab-sndart = INT.
lt_rec_tab-sndpri = 1.
APPEND lt_rec_tab.
lt_files-file = c_file.
APPEND lt_files.
begin of insertion by faianf01
hd_dat-objdes = header_mail.
CALL FUNCTION SO_ATTACHMENT_INSERT
EXPORTING
object_id = object_id
attach_type = attach_type
object_hd_change = hd_dat
owner = sy-uname
TABLES
objcont = l_objcont
objhead = l_objhead
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
object_type_not_exist = 17
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
x_error = 1000.
IF sy-subrc > 0.
ENDIF.
end of insertion by faianf01
send email from SAPOFFICE
CALL FUNCTION SO_OBJECT_SEND
EXPORTING
folder_id = folder_id
object_id = object_id
outbox_flag = outbox_flag
link_folder_id = link_folder_id
owner = sy-uname
check_send_authority = X
TABLES
receivers = lt_rec_tab
note_text = lt_note_text
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
component_not_available = 1
folder_no_authorization = 5
folder_not_exist = 6
forwarder_not_exist = 8
object_no_authorization = 13
object_not_exist = 14
object_not_sent = 15
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
too_much_receivers = 73
user_not_exist = 35.
ENDIF.
ENDFUNCTION.
=================================================================================
z_send_email_fax
FUNCTION ZCBFS_SEND_MAIL.
Interface local:
* IMPORTING
* REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
* REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
* TABLES
* LIST_FAX_MAIL_NUMBER STRUCTURE SOLI
* EXCEPTIONS
* ERR_NO_ABAP_SPOOLJOB
DATA: vg_achou(1) TYPE n.
Fist part: Verify if the spool really exists
vg_achou = 1.
DO 60 TIMES.
SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
IF sy-subrc IS INITIAL.
CLEAR vg_achou.
EXIT.
ELSE.
WAIT UP TO 1 SECONDS.
ENDIF.
ENDDO.
IF vg_achou = 1.
RAISE err_no_abap_spooljob. doesnt exist
ENDIF.
client = tsp01-rqclient.
name = tsp01-rqo1name.
CALL FUNCTION RSTS_GET_ATTRIBUTES
EXPORTING
authority = SP01′
client = client
name = name
part = 1
IMPORTING
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF objtype(3) = OTF.
desired_type = otf.
ELSE.
desired_type = ali.
ENDIF.
CALL FUNCTION RSPO_RETURN_SPOOLJOB
EXPORTING
rqident = src_spoolid
desired_type = desired_type
IMPORTING
real_type = real_type
TABLES
buffer = l_objcont
EXCEPTIONS
no_such_job = 14
type_no_match = 94
job_contains_no_data = 54
no_permission = 21
can_not_access = 21
read_error = 54.
IF sy-subrc EQ 0.
attach_type = real_type.
ENDIF.
CALL FUNCTION SO_FOLDER_ROOT_ID_GET
EXPORTING
owner = sy-uname
region = ou_fol
IMPORTING
folder_id = l_folder_id
EXCEPTIONS
OTHERS = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp = l_folder_id-foltp.
g_document-folyr = l_folder_id-folyr.
g_document-folno = l_folder_id-folno.
g_document-objtp = c_objtp.
g_document-objdes = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes = header_mail.
CALL FUNCTION SO_DOCUMENT_REPOSITORY_MANAGER
EXPORTING
method = SAVE
office_user = sy-uname
IMPORTING
authority = g_authority
TABLES
attachments = lt_attachments
CHANGING
document = g_document
header_data = g_header_data
EXCEPTIONS
OTHERS = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
LOOP AT LIST_FAX_MAIL_NUMBER.
lt_rec_tab-recextnam = LIST_FAX_MAIL_NUMBER-LINE.
lt_rec_tab-recesc = U.
lt_rec_tab-sndart = INT.
lt_rec_tab-sndpri = 1.
APPEND lt_rec_tab.
ENDLOOP.
lt_files-file = c_file.
APPEND lt_files.
hd_dat-objdes = header_mail.
CALL FUNCTION SO_ATTACHMENT_INSERT
EXPORTING
object_id = object_id
attach_type = attach_type
object_hd_change = hd_dat
owner = sy-uname
TABLES
objcont = l_objcont
objhead = l_objhead
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
object_type_not_exist = 17
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
x_error = 1000.
IF sy-subrc > 0.
ENDIF.
send email from SAPOFFICE
CALL FUNCTION SO_OBJECT_SEND
EXPORTING
folder_id = folder_id
object_id = object_id
outbox_flag = outbox_flag
link_folder_id = link_folder_id
owner = sy-uname
TABLES
receivers = lt_rec_tab
note_text = lt_note_text
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
component_not_available = 1
folder_no_authorization = 5
folder_not_exist = 6
forwarder_not_exist = 8
object_no_authorization = 13
object_not_exist = 14
object_not_sent = 15
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
too_much_receivers = 73
user_not_exist = 35.
ENDFUNCTION.
regards,
srinivas
<b>*reward for useful answers*</b> -
Use of ABAP expression in the Send Mail Header and Text
Hi Workflow Gurus,
I have a requirement wherein I have to inform the Manager of a user that his/her request for leave availment has been approved. However, we need to show the users name for the Manager to easily identify the user.
Now, I checked the send mail step and it is possible to insert an expression, but the available expressions are confined within the containers available. Hence, we only have the user id of the workflow initiator.
Is there a way to place a code in the send mail expression which will determine the user's employee name given the user id as opposed to having to create an FM and a method to determine the users name? Or is the only recourse to develop and fm and a method to determine these details in the background and pass it to the containers for extraction?
Regards,If you don't have for example the employee name in the available container elements, you need to add it and do the necessary coding/development for it. Classically employee or user data has been retrieved by using a certain standard background task to get the user/employee object based on the user ID. This will require an additional background step but no coding since the task includes the coding already.
It is anyhow possible to try to get the data for example with functional methods by using container operations in the workflow (or it is also possible to do this in binding too) - but then you need to develop a functional method(s). In other words you can use a functional method for example in your binding or in a container operation. Check for example Jocelyn Dart's blog about functional methods. Anyhow, how well the functional methods will work depends on the SAP system version.
Regards,
Karri
Maybe you are looking for
-
X issues - no xrandr scale after Xorg update (MBP Retina)
Hi, I just did a full update (2014-08-16) through pacman, which included an Xorg server update (1.15.2-1 -> 1.16.0-6). My previous full update had been just over a month ago (2014-07-08). On logging in, KDE basically was running incredibly slowly (ie
-
MacBook Computer keeps crashing
Checking in to see if anybody else is having this issue and what may be causing it; My computer is only a few weeks old and keeps getting a series of grays overlaying the screen and then this massage comes up in several languages: "You need to restar
-
What is the creator code for final cut pro x?
Final Cut Pro 7 has creator code "KeyG" but the trial for FCP X has creator code "????" (according to the .plist). Does the full version use "KeyG" like previous ones, or a new code? Thanks Marc
-
Why am I getting internal server error
I am trying to buy a new phone and when I click shop, I get "Internal Server Error" I have chatted with people from Verizon but they just tell me to call. I explain that I need a phone in order to call. Chat people should be able to help... Does an
-
Bug: Fill of a group setting isn't saved
If you have a create a group with at least one layer, then change the Fill of the group to anything other than 100%, that value isn't saved for the next time that you open that file. It remembers the opacity, paint type (pass through is default), and