Sending mail through FM : SO_NEW_DOCUMENT_SEND_API1
Dear Friends,
I am using the Function Module : SO_NEW_DOCUMENT_SEND_API1 to send mails to MS Outlook. My program is working perfectly fine, when I execute in the foreground. However, when I schedule a job for the same program, it is throwing up an exception. Not sure if it something to do with the user authorization? In fact, user has full authorization. Could someone help on this?
Regards,
Chandru
Here we go...
get the 'To' email address. " Receiver mail id.
clear buyer_receivers.
buyer_receivers-receiver = wa_zmala-smtp_addr.
buyer_receivers-rec_type = 'U'.
buyer_receivers-copy = ' '.
append buyer_receivers.
get the 'CC' email address. " Reply back mail id.
clear buyer_receivers.
buyer_receivers-receiver = wa_zmala-rbmail.
buyer_receivers-rec_type = 'U'.
buyer_receivers-copy = 'X'. " Indicates a carbon copy
append buyer_receivers.
get the subject of the mail.
concatenate sy-sysid wa_zmala-bukrs 'SINA' 'DocID'
wa_zmala-documentid wa_zmala-vname into subject_data-obj_descr
separated by '-'.
subject_data-obj_langu = sy-langu.
subject_data-sensitivty = 'F'. " indicates functional
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_type = 'RAW'
document_data = subject_data
put_in_outbox = 'X'
tables
object_content = object_content
receivers = buyer_receivers
exceptions
too_many_receivers = 2
document_not_sent = 3
document_type_not_exist
operation_no_authorization
parameter_error
x_error
enqueue_error
document_not_sent = 2
others = 99.
case sy-subrc.
when 0.
update zmalainbox set
mail_date = sy-datum
mail_time = sy-uzeit
where documentid = wa_zmala-documentid.
condense temp_mailid1. condense temp_mailid2.
write: / temp_docid, text-002, temp_mailid1, ',', temp_mailid2.
uline.
when others.
write: / temp_docid, text-003.
uline.
endcase.
endform
form initiate_mail_send_program.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endform.
Similar Messages
-
Problem in sending mail through dynamics actions
Hi Friends,
I have a problem in sending mail through dynamics actions . In this we pass a subroutine in dynamics actions which send an mail when promotion action occured.
Problem is that sometimes it will send an mail or sometimes not. I have no idea to solve this problem.
Can anyone suggest me .
Thanks ,
Anish
Moderator message : Duplicate post locked.
Edited by: Vinod Kumar on Sep 5, 2011 9:45 AMHi,
Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
thank You -
Problem in sending mail through workflow
Hi All,
I am trying to create a workflow. I created a workflow and once document is made, this workflow trigerrs and i am able to get user decision to my user id. once if i click on approve, mail should be triggered to my mail id. but mail is not coming to my mail id. i checked in SOST transaction, <b>mail status set to Transmitted.</b>, and not as sent .
But i tested a sample test message from sbwp to my mail id and it is working fine. Only through workflow, sending message to outlook is not working. i checked my user in the system in SU01 transaction also, there also mail id is mentioned. what could be reason for not able to send mails through workflow.?
Its urgent.
Points will be awarded to all.
Regards,
vinothHi,
Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
thank You -
Problem while sending mail through posprocess event hadler inOIM 11g r2
Hi,
i am sending mail through posprocess event hadler inOIM 11g r2 when user is created.But i am getting following error in resolver class.
java.lang.NullPointerException
at oracle.iam.identity.usermgmt.impl.UserDetailsProviderImpl.getUserDetails(UserDetailsProviderImpl.java:102)
at oracle.iam.notification.impl.util.NotificationUtil.getUserPreferences(NotificationUtil.java:83)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:523)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:271)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at oracle.iam.notification.impl.util.NotificationUtil.getUserPreferences(NotificationUtil.java:83)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:523)
at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:271)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
Edited by: 853559 on Sep 25, 2012 6:27 AMIf you are using Custom Notification XML, make sure to have StaticData element in it. StaticData defines the entitites that can be used in the notification template, and these entities attributes are used to define substitution tokens in the template.
-
Sending mail through a proxy client
I have the following simple code to send mail through a SOCKS proxy client:
package com.apna.beans;
import java.util.Properties;
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.DataSource;
import javax.activation.FileDataSource;
import javax.activation.DataHandler ;
public class SMail{
public static void main(String[]a){
System.setProperty("proxySet","true");
/*System.getProperties().put("http.proxyPort","25");
System.getProperties().put("http.proxyHost","192.168.0.1");*/
Properties props = System.getProperties();
String msg = "";
// Get system properties
final String username = "vedijitendra";
final String password = "sendmail";
props.put("socksProxyHost", "pc-2");
props.put("socksProxyPort", "1080");
props.put("mail.smtp.host", "smtp.gmail.com");
props.put("mail.smtp.starttls.enable", "true");
props.put("mail.user", username);
props.put("mail.smtp.auth","true"); // this is imp for authorisation.
//props.put("mail.host", "192.168.0.1");
props.put("mail.debug", "true");
props.put("mail.store.protocol", "pop3");
props.put("mail.transport.protocol", "smtp");
try{
//here the authorisation takes place using an Anonymous class.
Session session = Session.getDefaultInstance(props,
new javax.mail.Authenticator (){
protected
javax.mail.PasswordAuthentication
getPasswordAuthentication() {
return new
javax.mail.PasswordAuthentication(username,
password);
// Define message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress("[email protected]"));
message.addRecipient( Message.RecipientType.TO, new
InternetAddress("[email protected]"));
message.setSubject("Test");
message.setContent("text", "text/html");
// Send the message
Transport.send(message);
msg = "The mail has been sent.";
} catch(Exception e){
e.printStackTrace();
msg = "The mail has not been sent.";
I am able to connect to the GMail's SMTP server.
However, when the Transport. send method is executed, I get:
java.lang.NullPointerException
at com.sun.mail.util.SocketFetcher.startTLS(SocketFetcher.java:242)
at com.sun.mail.smtp.SMTPTransport.startTLS(SMTPTransport.java:1191)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:348)
at javax.mail.Service.connect(Service.java:297)
at javax.mail.Service.connect(Service.java:156)
at javax.mail.Service.connect(Service.java:105)
at javax.mail.Transport.send0(Transport.java:168)
at javax.mail.Transport.send(Transport.java:98)
Any ideas?I have the following simple code to send mail through a SOCKS proxy client:
package com.apna.beans;
import java.util.Properties;
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.DataSource;
import javax.activation.FileDataSource;
import javax.activation.DataHandler ;
public class SMail{
public static void main(String[]a){
System.setProperty("proxySet","true");
/*System.getProperties().put("http.proxyPort","25");
System.getProperties().put("http.proxyHost","192.168.0.1");*/
Properties props = System.getProperties();
String msg = "";
// Get system properties
final String username = "vedijitendra";
final String password = "sendmail";
props.put("socksProxyHost", "pc-2");
props.put("socksProxyPort", "1080");
props.put("mail.smtp.host", "smtp.gmail.com");
props.put("mail.smtp.starttls.enable", "true");
props.put("mail.user", username);
props.put("mail.smtp.auth","true"); // this is imp for authorisation.
//props.put("mail.host", "192.168.0.1");
props.put("mail.debug", "true");
props.put("mail.store.protocol", "pop3");
props.put("mail.transport.protocol", "smtp");
try{
//here the authorisation takes place using an Anonymous class.
Session session = Session.getDefaultInstance(props,
new javax.mail.Authenticator (){
protected
javax.mail.PasswordAuthentication
getPasswordAuthentication() {
return new
javax.mail.PasswordAuthentication(username,
password);
// Define message
Message message = new MimeMessage(session);
message.setFrom(new InternetAddress("[email protected]"));
message.addRecipient( Message.RecipientType.TO, new
InternetAddress("[email protected]"));
message.setSubject("Test");
message.setContent("text", "text/html");
// Send the message
Transport.send(message);
msg = "The mail has been sent.";
} catch(Exception e){
e.printStackTrace();
msg = "The mail has not been sent.";
I am able to connect to the GMail's SMTP server.
However, when the Transport. send method is executed, I get:
java.lang.NullPointerException
at com.sun.mail.util.SocketFetcher.startTLS(SocketFetcher.java:242)
at com.sun.mail.smtp.SMTPTransport.startTLS(SMTPTransport.java:1191)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:348)
at javax.mail.Service.connect(Service.java:297)
at javax.mail.Service.connect(Service.java:156)
at javax.mail.Service.connect(Service.java:105)
at javax.mail.Transport.send0(Transport.java:168)
at javax.mail.Transport.send(Transport.java:98)
Any ideas? -
Error while sending mail through SMTP
Hi,
We are getting the following error while trying to send mail through SMTP.
'554 ERROR_MESSAGE_STATE: SMTP_NO_HANDLER( host:1-,subrc:0001)'
Please advice,
Regards,
SamHi All,
Configured SMTP as per the note 455140,i can able to send mails from SAP to the out side world,
mails in SAP.When i tried the test to check whether the SAP system is correctly set up to receive e-mails as per the note 607108, iam getting a connection closed message as below.
afgdev:pgdadm> telnet afgdev 2500
Trying...
Connected to afgdev.
Escape character is '^]'.
220 afgdev.abc.ae SAP 6.40(52) ESMTP service ready
helo afgdev
250 afgdev.abc.ae
mail from:<[email protected]>
250 Ok
rcpt to:<[email protected]>
250 Ok
data
354 Enter mail, end with "."
Hello,This is a test.
Connection closed.
afgdev:pgdadm>
rgds
Sam -
Uncaught Exception occured while sending mail through abap code.
Hi,
Uncaught Exception occured while sending mail through abap code.Run time Errors "UNCAUGHT_EXCEPTION" occured after excuting the call method CALL METHOD SEND_REQUEST->SEND( ).kindly help in resolving the issue.HI,
Runtime Error: UNCAUGHT_EXCEPTION details.
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_ADDRESS_BCS
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_ADDRESS_BCS' was raised, but it was not caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLZSEND_MAIL' has to be
terminated.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_ADDRESS_BCS', was not caught in
procedure "SEND_MAIL" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An exception occurred
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_ADDRESS_BCS"
"SAPLZSEND_MAIL" or "LZSEND_MAILU01"
"ZSEND_EMAIL"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SEND_MAIL" "(FORM)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
Please help me to resolve this issue. -
I am not able to send mails through Yahoo APP. It gives me an error msg :"the sender address has ben rejected by the server ".
I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.
So, i am not able to enter anything in fields under SMTP server settingsYou probably have changing settings disabled in Restrictions.
-
Error: in sending mail through dynamics actions
Hi Friends,
I have a problem in sending mail through dynamics actions . In this we pass a subroutine in dynamics actions which send an mail when promotion action occured.
Problem is that sometimes it will send an mail or sometimes not. I have no idea to solve this problem.
Can anyone suggest me .
Thanks ,
Anish
Moderator message : Duplicate post locked. Continue with thread [send mail through dynamic actions|send mail through dynamic actions].
Edited by: Vinod Kumar on Sep 5, 2011 10:19 AMthis is where i created the keystore.jks file
I navigated to the location C:\Program Files\Java\jdk1.6.0_13\bin in command prompt and typed the following command to create the keystore
keytool -import -trustcacerts -alias root -file mail_test_com.crt -keystore keystore.jksI was asked to set the password for keystore and then i was asked the question "Trust this certificate? [no]:" for which i gave yes.
If this is not the right place to create the keystore.jks can you please tell me what is correct location to create the keystore file. -
Sending mail through "local" mail server?
I've set up fetchmail and procmail to download (and delete) mail from my mail host to a ~/Maildir on a server in my home which I then access through dovecot IMAP.
I want to be able to send mail "through" my server too, instead of going straight to my host's smtp. Maybe there isn't any good reason to do this? I want my Sent mail to be stored on my local server. And if set up more than one mail account, it would have to use the right smtp depending on the email address.
Anyone know how they would go about it? I found a handful of dovecot/fetchmail articles, but none that mention sending mail really. There's an oldish looking wiki article on exim, but I feel like I shouldn't need to use system wide conf for this.Dovecot and fetchmail only handle the mail coming to you (ie, IMAP/POP3). You need SMTP to send email.
I highly recommend Postfix, and set it up to use your ISP's mail server as relay_host -
Cannot send mail through Hotmail on iPad
Cannot send mail through Hotmail on iPad, it's ok through bigpond though. I have tried deleting account and shutdowns x 2 but still nothing.
The message which appears is telling me the user name or password "SMTP: @[email protected]" is incorrect.
Thanks, RonYahoo's been having persistently random issues for months. You can try just waiting it out, or delete and readd your yahoo account. When my accounts were affected I just used webmail to access my yahoo accounts until it cleared up.
Chances are it's all on their end and really all you can do is wait it out. -
I have an iphone 4s. able to receive all the incoming mails but not able to send mails through this iphone 4s. please help.
delete and reinstall the email account.
-
About send mail through Outlook Express
I send mail through outlook . but system shows "your server has been terminate suddently. The possible reasons include servers error , NetWork error or long time among inactive status ." I promise the setting of POP3 and SMTP is right. Who can help me ? thank you.
I would start first with, do you know that the smtp setting for your server actually points to a Sun Java Enterprise Messaging Server?
what do you get on a command line when you do:
telnet <what you have for smtp> 25
? -
I am unable to access mail on icloud or send mail through the icloud
Here is how to set up your iCloud email account:
http://www.apple.com/support/macosx/mailassistant/ -
Sending Mail through Outlook using PL/SQL
I have installed Oracle 9i (9.2.0.1) on Windows Xp with SP 2 platform. My MS Outlook has been configured.
How could i send mail through Microsoft outlook by using PL/SQL Program.How could i send mail through Microsoft outlook by using PL/SQL Program.Nonsensical question. MS Outlook is a mail client. A PL/SQL program is also a mail client.
Both these need to talk to a mail server. It does not make sense for one mail client to "+talk+" to another client for passing it e-mails that need to be send.
The mail client talks to a mail server using the SMTP ( Simple Mail Transfer Protocol ). There are also other protocols such as IMAP (open standard) and MAPI (Microsoft proprietary).
Oracle's PL/SQL environment by default supports SMTP via the UTL_SMTP, and UTL_MAIL packages - these provide the PL/SQL developer with an interface to use to send e-mails.
MS Outlook (client) does not feature anywhere in this regard, whereas MS Exchange as a mail server will (assuming it is being used on your network).
Maybe you are looking for
-
Where can I find a tutorial for garage band?
I would like to learn the basics and go from there.
-
Moving Pictures to new drive- XP MC/LR 1.1
What if I want to move the photos that have been imported at their location? IOW, I am on Windows XP MC, I have imported lots of photos (7000+) and have either brought them from their location in {c:\documents and settings\.....} ...My Documents\My P
-
SAX Parser for Oracle 8.1.5 needed!!! Urgent
Please help. If you know something please send me mail. Regards Kail
-
Do I need Safari plug-ins?
I'm one of the multitude of people having problems with Safari (slow loading or not loading at all). I've been checking the forums for months now and I've tried almost everything I've come across, but still no show. I just remembered that when Safari
-
How do I automatically spin down the hard drive to save power?
I have searched for this in the wiki and the forums, so if I've missed something, please point it out to me, but is there a way to have Arch automatically spin down hard drives and/or suspend the machine to ram to save power? I'm not really intereste