Sending mail to a bunch of recipients, got a message failure, but can't reach the connection doctor. It's too far down

I was using Mail to send a message to about 200 recipients.
Got a message
"Cannot send message. Did not recognize the following
   recipients:
   xxxxxxx
   xxxxxxx"
200 addresses down
Cannot reach the Connection doctor button.
It's too far down.
How can I erase it?
I still use Mail, but the message failure is still there.

Try this settings on your Router, This will solve your problem.
Open the set up page of the router by launching an Internet Explorer Browser and type the address bar, 192.168.1.1 and press enter. When it prompts for the username and password, leave the username field
empty and provide password as admin and click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
Click Clone & click save settings
Check WAN Ip on Status page of router ....
If getting Valid Ip .... try going online
If not ... power cycle for 4-5 minutes & then again check the WAN Ip address .....

Similar Messages

I use Yahoo mail. Why do I sometimes get a message saying "Safari can't identify the website ca.mg5.mail.yahoo.ca ? When I click continue there is no problem.

How do I stop getting messages saying "Safari can't identify the website ca.mg5.mail.yahoo.com. The cerrtificate for this website is invalid " In fact there does not appear to be a problem because when I click "continue" everything proceeds as usual. But I would like to stop getting this message.

Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
8.8.8.8
8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must clickApply in order for any changes to take effect.
2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

Iphone 5 stollen got a new one but can't get the icloud backup

My Iphone was stollen and I put on lost mode on "find my Iphone". Now I have a new one and I'm trying to get the backup from icloud, but I always get a message that my Apple ID is locked. I've already reset my password twice and deleted the previous equipment from the app (Find my Iphone), but I still can't get the backup.
what should I do?? Tks

For you to get the pictures off the old device, you would need to have connected the device to the computer in the past, so you could select it to trust the devices. Without a working screen on the device you will not be able to do that. Because of that, you would not be able to even use your computer to navigate the file system to get the photos. Since you never created a backup in iTunes, did you do one in iCloud? If not, then the pictures cannot be recovered. Why would you not backup your phone, or import photos to the computer like you would with a digital camera?

I got a full iCloud, but can not delete the used data

When I open the administration panel, it only reports Email 5MB and backups 0kB. I have only 114MB of 5GB free, but I am not able to see what it is that occupies my space.
So my iCloud is full, but I have nothing to delete. Has anyone experienced this behaviour?

Hello, Landerson.
Thank you for visiting Apple Support Communities.
You may find this article helpful with the issue you are experiencing.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Cheers,
Jason H.

My emails on my mac and macbook will not send but the connection doctor confirms connection to the server. Any ideas??? Thank you

I am unable to send emails on my imac and macbook. They go straight to my outbox. The connection doctor comes up with green lights. Any ideas? Hopeing someone out there can help me - thank you.

EA68, who is your broadband provider, if it is Sky then they have recently merged with Yahoo, and there have been similar problems with people who use Mail to access their emails.
If this is the case you will need to remove your SKY account from Mail and then set it up again.
Make sure you clear your inbox, and back up any important emails you have.
IN MAIL go to prefrences and accounts. Highlight SKY account and select the MINUS or delete sign.
Now select the PLUS or add button and type in your sky email address, and then your sky password. Follow on screen instructions, and your emails should then work.
Hope this solves your problem.

Send mail with attachment and more recipients

Hi to all,
I have this procedure :
PROCEDURE SPEDISCI_MAIL
Mittente IN VARCHAR2,
Destinatario IN VARCHAR2,
Oggetto IN VARCHAR2,
Messaggio IN VARCHAR2
IS
mailhost VARCHAR2(40) := 'pippo.com';
conn utl_smtp.connection;
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
mesg VARCHAR2( 1000 );
local_mittente VARCHAR2(2000) := mittente;
BEGIN
conn := utl_smtp.open_connection (mailhost,25);
mesg:='Date:'||TO_CHAR(SYSDATE,'dd mon yy hh24:mi:ss')||crlf||
'From:<'||mittente||'>'||crlf||
'Subject:'||Oggetto||crlf||
'To:'||destinatario||crlf||''
||crlf||messaggio;
utl_smtp.helo(conn, mailhost);
utl_smtp.mail(conn,local_mittente);
utl_smtp.rcpt(conn,destinatario);
utl_smtp.data(conn, mesg);
utl_smtp.quit(conn);
END;
Can I send mail with attachment and more recipients?
Thank you
Silvia

Consider using UTL_MAIL package:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_mail.htm
(Note: it's not installed and configured by default, but the scripts are supplied with the Oracle database, see documentation for instructions)

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no lo

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your help

I'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field.

I have signed in to my mail on my ipod but it keeps saying 'the connection to the server failed' and i cannot receive or send anything what should i do?

i have signed in to my mail on my ipod but it keeps saying 'the connection to the server failed' and i cannot receive or send anything what should i do?

Did it work on the iPod before?
Can you access that mail account on other devices?
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Why can I Only send mail from my iCloud Account and none of my others yet can receive from all ?

why can I Only send mail from my iCloud Account and none of my others yet can receive from all ?

Morning Allan ,sorry hit the wrong button. Thank you for responding . Meant to reply not notify you that my issue was solved . It's not . I imported all my settings via iTunes and all of the accounts receive mail as I said but can't send . Can you tell me exactly what to change with regard to my outgoing smtp. and PE the authentication ?

TS3276 I am no longer receiving my mail. All my settings are the same and I can send mail. The connection doctor says I am connected, but I am no longer receiving anything. If you can help, I would appreciate it. Keep it simple, please.

I am no longer receiving my mail. All my settings are the same and I can send mail. The connection doctor says I am connected, but I am no longer receiving anything. If you can help, I would appreciate it. Keep it simple, please.

TS3276 Web through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro, but no my iMac. Connection Doctor shows all green lights.

Went through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro and iPhone, but no my iMac. Connection Doctor shows all green lights. This started today when I was prompted to re-enter incoming mail server passwords. I re-entered passowrds yet again to make sure they were correct. Rebuilt the inBox. Connection Doctor continues to show all green lights, but am still unable to download mail to the inbox. Has anyone else ever run into this problem?

I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.

I have Aperture3 and iPhoto. When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why?

I have Aperture3 and iPhoto. When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why? Others couldn't open them so I sent them to myself and get the same message. Doesn't seem to be a size issue as I've tried with really short clips (4 seconds). As I recall, I didn't have this problem before buying Aperture last fall, when I only had iPhoto. It appears that by default, an attachment to an email automatically comes from my iPhoto files and not Aperture - assume that is supposed to happen but not sure. Thanks for any and all help!
Jim

When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why?
How are you tryin to send the .AVI file? Are you sending the attachment directly from Mail or from Aperture or iPhoto?

My husband bought ipad 6mos ago in dubai for my daughter unluckily the ipad got snatched at redeem but almost damage with the dent and got no power, what should i do?please help

my husband bought ipad 6mos ago in dubai for my daughter unluckily the ipad got snatched at redeem but almost damage with the dent and got no power, what should i do?please help. that i pad is very much important to us,only the box i have here, what should i do if they dont allow to fixed it?

You can try taking the iPad to an authorized service center in the Philippines:
https://locate.apple.com/ph/en/
but since the iPad sold in the UAE is specific to that country (the government there requires that Facetime be blocked), a Philippine service center may not be able to service your iPad. You can ask though. If they cannot help, then you would probably need to send the iPad back to the UAE for service.
Regards.

I need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

i need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

Hello,
the way is written there Activation & deactivation help >>> (see there only to understand the procedure) Common activation problems >>> "Activation limit reached for [product]. This serial number has already been activated on 2 computers." "Maximum activations exceeded."
>>> How to deactivate or sign out >>> A single license for Adobe software lets you install the applications on two computers—for example, at home and at the office. However, you can use the software on only one computer at any given time.
If you want to install the software on a third computer, deactivate the software on the computer on which you will no longer use the software. Then, activate the software on the new computer.
Hans-Günter

HT4972 i got my new iphone 4s , can not download the OS 5 it says error 9006 on my windows 7. also the phone does not show the capacity and serial number details on the itunes summery ?? please help

i got my new iphone 4s , can not download the OS 5 it says error 9006 on my windows 7. also the phone does not show the capacity and serial number details on the itunes summery ?? please help

Hi Kevin,
The iPhone 4S comes automatically loaded with iOS 5, and any updates after iOS 5.0 can be completed directly from on the phone in Settings > General > Software Update. If you are having trouble using iTunes to update software, I suggest you reset iTunes so that you can pair your phone to the computer again, because if you can't see the serial number and capacity, that generally means your phone isn't paired. For any problems this doesn't fix, please contact Apple directly through their automated help line, 1(800)MYAPPLE.

Sending mail to a bunch of recipients, got a message failure, but can't reach the connection doctor. It's too far down

Similar Messages

Maybe you are looking for