Sending mail using a job and a package

Dear all,
I would like to request your help in this task:
in fact I have a package p$job_sendmail used for sending emails and a job
that calls this package.
after doing an insert of a single row in a table x, for each row inserted in that table the job runs and an email is sent.
The code of the package is:
create or replace package p$job_sendmail is
g_pck           varchar2(256):='job_sendmail';
procedure lance;
procedure arret;
end;
create or replace package body p$job_sendmail is
procedure lance is
     l_error               varchar2(256);
     l_message               varchar2(4000);
     l_file               varchar2(256);
     l_rep                    varchar2(256);
     l_ret                    number;
   begin
     l_error := 'OK';
     l_message:= null;
     loop
          begin
p$msg_sendmail.lit_mess
(2,
5,
l_error,
l_message
if l_erreur != 'OK' then
     rollback;
end if;
exit when l_erreur != 'OK';
commit;
exception
when OTHERS then
rollback;
exit;
end;
end loop;
end;
procedure arret is
begin
     p$msg_sendmail.arret;
   end;
end;
The code of the job that runs for each row inserted in the table x and calls the package is:SELECT JOB,LOG_USER,WHAT FROM USER_JOBS;
prompt
accept NUM_JOB prompt ' Number of the job: '
var indice_job number;
begin
:indice_job := &NUM_JOB;
if :indice_job != 0 then
DBMS_JOB.ISUBMIT(:indice_job,'p$job_sendmail.lance;',SYSDATE);
end if;
COMMIT;
end;
The problem is that after inserting a row in the tabke x and running the job manually from pl/sql, the email is not sent
can anyone help me please?

http://forum.java.sun.com/thread.jsp?forum=43&thread=165268

Similar Messages

  • After updating to OS5, my iphone 4 can not send mail using wi fi and 3G.. only 1 or the other. It will not switch servers from using ATT 3G server to then using WiFi

    I have called my internet provider, my email server company and AT&T. All my settings are fine and everything was fine before the OS5 upgrade. I can send email using WiFi when I have my email host as the outgoing server and can send email 3G using ATT server only when on 3G. The phone is not switching back and forth servers from wi fi connection to 3G. 

    Hey there Jachin W.,
    It sounds like you are unable to connect to your home Wi-Fi suddenly on 2 different iOS devices. I would be interested to know if the affected phones are able to connect to a different Wi-Fi connection, but barring that I would use the following article to help troubleshoot the devices and the Wi-Fi connection:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    And this section from toward the bottom if needed:
    Unable to connect to a Wi-Fi network
    Verify that you're attempting to connect to your desired Wi-Fi network.
    Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • How to setup and send mails using utl_mail on Oracle E-Biz R12

    Dear All
    There is a new requirement from client to setup and send mails using utl_mail utility on Oracle EBS R12.1.1
    What is utl_mail utility ? what is the difference between Workflow Notification Mailer and this utility/tool?
    What are etiquette's to pursue mail functionality in apps / db?
    - Chetan

    What is utl_mail utility
    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_mail.htm
    How to Use the UTL_MAIL Package [ID 269375.1]
    FAQ and Known Issues While Using UTL_SMTP and UTL_MAIL [ID 730746.1]
    Master Note For PL/SQL UTL_SMTP and UTL_MAIL Packages [ID 1137673.1]
    Workflow Notification Mailer:
    you can send email using workflow notification email procedures,These ar built into the system and only need some minor configuration. check Workflow Administrator's Guide, Chapter 2, Section: Setting Up Notification Mailers for more detail.

  • Sending mail using IOS and alias

    I have an ipad and iphone that uses my name alias when I send mail "from" my devices and then my wife has an ipad and iphone that I would like for her to use her alias when she sends emails from her devices.  Currently even though I have both alias active to use with mail, when I select my alias on my devices it automatically uses that alias on my wife's devices.  She has to manually change the "from" address to her alias.  Is there a way to designate her alias as the "from" address on her device and I can use my alias in the "from" on my devices?  This is not a problem on my laptop using Maverick.

    http://forum.java.sun.com/thread.jsp?forum=43&thread=165268

  • Hi, I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mail are not receiving. Mail queue showing Connection refused error. Please help me

    I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
    Thanks
    GIRI

    Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

  • Sending Mails Using APEX 4.2

    Hi All
    I am in need to send emails using APEX 4.2. I have seen under page processing there is option called Send Email. But really not sure how to make use of it. My requirement is to trigger a mail on employee's birthday. Following is the screenshot.
    Can anyone help me on this. Any reply would highly be appreciable.
    Process Type
    Process Attributes
    Process
    Messages
    Process Conditions
    Create Page Process - Process Type
    Cancel 
    Next
    Page:
    3 - Edit AR Employees
    Select the category of the process you wish to create:
    Select the category of the process you wish to create:
    PL/SQL
    Reset Pagination
    Plug-ins
    Session State
    Data Manipulation
    Web Services
    Form Pagination
    Send E-Mail
    Close popup window
    Run On Demand Process

    Hello,
    First you need to write a procedure to send e-mails. Please find sample code below to send e-mail to manager, if employee birthday is today
    CREATE OR REPLACE PROCEDURE pr_send_birthday_alerts
    IS
    BEGIN
      /* if V_APP_USER is null, procedure is being executed as job
      set security context */
      IF v('APP_USER') IS NULL THEN
      wwv_flow_api.set_security_group_id;
      END IF;
      -- Trigger mails if employee birthday is today
      -- Send mail to Manager email address
      /* Please change with actual table and column values */
      FOR i IN (SELECT emp.name emp_name, manager.email manager_email, manager.name manager_name FROM t_employee emp, t_employee manager WHERE emp.manager_id = manager.emp_id AND TRUNC(emp.birth_date) = TRUNC(SYSDATE))
      LOOP
      /* Send mail */
      /* Please change Subject and Body according to your need */
      APEX_MAIL.SEND(
      p_to        => i.manager_email,
      p_cc => NULL,
      p_from      => '[email protected]',
      p_subj      => 'Today is '||i.emp_name||' birthday',
      p_body      => NULL
      END LOOP;
      -- push all emails from queue
      APEX_MAIL.PUSH_QUEUE;
    END pr_send_birthday_alerts;
    Next you need to schedule a job which will run above procedure everyday to Send Birthday alerts. Please find sample code below to schedule a procedure to run as Job.
    BEGIN
      /* Change Start date according to your requirement */
      DBMS_SCHEDULER.CREATE_SCHEDULE (
      schedule_name          => 'sch_every_day',
      start_date             => TO_TIMESTAMP_TZ(TO_CHAR(SYSDATE,'YYYY-MM-DD')||' 06:00:00 +02:00','YYYY-MM-DD HH:MI:SS TZH:TZM'),
      repeat_interval        => 'FREQ=DAILY;'
      DBMS_SCHEDULER.CREATE_JOB (
      job_name                => 'job_every_day',
      schedule_name           => 'sch_every_day',
      job_type                => 'STORED_PROCEDURE',
      job_action              => 'pr_send_birthday_alerts',
      enabled                 => TRUE
      COMMIT;
    END;
    So everyday in morning 6:00 A.M. GMT+ 2, system will check if any employee birthday is today and will send alert to his/her manager.
    Please note that these code is not tested.
    Regards,
    Hari

  • Cannot Send Mail using AIM account.

    I can receive mail fine but when I try to send mail I get the following message:
    Cannot send mail using the server smtp.aim.com:EmilyLozano.
    Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
    Message from: Emily Lozano <[email protected]>
    I left for a trip a few days ago, came back and now for no apparent reason cannot send mail as I always have. I have reconfigured the port to 587 and that did not help. Any suggestions? (I can send and receive fine via the web, but I really hate it.)

    I'm glad you got it figured out. So many times people on this forum sit around waiting for help when they could have retraced their steps, like you did, to figure out the source of the problem.

  • How can send mails using hotmail/rediffmail domain name?

    I have used the below code to send a mail using javamail API?Even when I am sending my application does not have notified any of error/exceptions,But the message is not reached to I have given receipient's address in the to field.
    import javax.mail.*;
    import javax.mail.internet.*;
    import javax.activation.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    import java.io.*;
    import java.util.*;
    public class Sendmail1 extends HttpServlet {
    private String smtpHost;
    // Initialize the servlet with the hostname of the SMTP server
    // we'll be using the send the messages
    public void init(ServletConfig config)
    throws ServletException {
    super.init(config);
    smtpHost = config.getInitParameter("smtpHost");
    //smtpHost = "sbm5501";
    smtpHost = "www.rediffmail.com";
    public void doGet(HttpServletRequest request,HttpServletResponse response)
    throws ServletException, java.io.IOException {
    String from = request.getParameter("from");
    String to "[email protected]";
    String cc = "[email protected]";
    String bcc ="[email protected]";
    String smtp ="www.rediffmail.com";
    String subject = "hai";
    String text = "Hai how r u";
    PrintWriter writer = response.getWriter();
    if (subject == null)
    subject = "Null";
    if (text == null)
    text = "No message";
    String status;
    try {
    // Create the JavaMail session
    java.util.Properties properties = System.getProperties();
    if (smtp == null)
    smtp = "www.rediffmail.com";
    properties.put("mail.smtp.host", smtp);
    Session session = Session.getInstance(properties, null);
    //to connect
    //Transport transport =session.getTransport("smtp");
    //transport.connect(smtpHost,user,password);
    // Construct the message
    MimeMessage message = new MimeMessage(session);
    // Set the from address
    Address fromAddress = new InternetAddress(from);
    message.setFrom(fromAddress);
    // Parse and set the recipient addresses
    Address[] toAddresses = InternetAddress.parse(to);
    message.setRecipients(Message.RecipientType.TO,toAddresses);
    Address[] ccAddresses = InternetAddress.parse(cc);
    message.setRecipients(Message.RecipientType.CC,ccAddresses);
    Address[] bccAddresses = InternetAddress.parse(to);
    message.setRecipients(Message.RecipientType.BCC,bccAddresses);
    // Set the subject and text
    message.setSubject(subject);
    message.setText(text);
    Transport.send(message);
    //status = "<h1>Congratulations,</h1><h2>Your message was sent.</h2>";
    } catch (AddressException e)
    status = "There was an error parsing the addresses. " + e;
    } catch (SendFailedException e)
    status = "<h1>Sorry,</h1><h2>There was an error sending the message.</h2>" + e;
    } catch (MessagingException e)
    status = "There was an unexpected error. " + e;
    // Output a status message
    response.setContentType("text/html");
    writer.println("<title>sendForm</title><body bgcolor= ><b><h3><font color=green><CENTER>CALIBERINFO.COM</CENTER></h3>Your message was sent to recepient(s).<br><font color=red>"+"\n"+to);
    writer.println("<br><br><a href=e:/mail/javamail/mail.html>back to compose</a>");
    writer.close();
    Please any one help me out from this probs.
    Awaiting for yours reply,
    or give me a reply to: [email protected]
    Regards,
    @maheshkumar.k

    Hi,
    how can send mails using hotmail/rediffmail domain name?In your java application,you specified www.rediffmail.com as your
    smtp server.But that is the address of that website.Try will a smtp
    server instead.For a list of free smtp servers,please visit http://www.thebestfree.net/free/freesmtp.htm
    Hope this helps.
    Good Luck.
    Gayam.Srinivasa Reddy
    Developer Technical Support
    Sun Microsystems
    http://www.sun.com/developers/support/

  • Error while sending mail using script task in ssis 2008

    Hi,
        i am trying to send mail using ssis 2008 script task.for my requirement i am not able to use send mail task.
    code i have used is
    declared read only variables system::packagename
     Dim PACKAGE As String
            PACKAGE = Dts.Variables("System::PackageName").Value.ToString()
            Dim myHtmlMessage As MailMessage
            Dim mySmtpClient As SmtpClient
            myHtmlMessage = New MailMessage("[email protected]", "[email protected]", "PACKAGE STATUS", PACKAGE + "WAS FAILED")
         mySmtpClient = New SmtpClient("smtp.gmail.com")
            mySmtpClient.Credentials = New NetworkCredential("[email protected]", "mypassword")
            mySmtpClient.EnableSsl = True
            mySmtpClient.Port = 587
            mySmtpClient.Send(myHtmlMessage)
    error i am getting is
    Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
    Authentication Required. Learn more at
       at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
       at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
       at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
       at System.Net.Mail.SmtpClient.Send(MailMessage message)
       at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
       at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
       at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
    can any one tell me where i am going wrong

    also getting error as follows
    Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
    Authentication Required. Learn more at
       at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
       at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
       at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
       at System.Net.Mail.SmtpClient.Send(MailMessage message)
       at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
       --- End of inner exception stack trace ---
       at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
       at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
       at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()

  • Issue  while sending mails using classes

    Hi Experts ,
    i have one issue when i try to send mails using classes cl_document_bcs,cl_cam_address_bcs,cl_bcs etc
    ISSUE :
    i put some data in selection screen and i get some output ( say i got 5 records), i select 3 records and press some button to trigger mail and mail is send, and now again the OUTPUT screen is  shown with  sended records but we can not send these records again ............ now i selcect remaining two records  and press button to trigger mail and THIS TIME MAIL IS NOT SEND.
    amd my code is :
    CREATE OBJECT l_document.
      CREATE OBJECT l_recipient.
      TRY.
          cl_bcs_convert=>string_to_solix(
          EXPORTING
          iv_string = fp_wa_output
          iv_codepage = fp_v_code_page
          iv_add_bom = 'X'
          IMPORTING
          et_solix = l_wa_output_binary
          ev_size = l_v_size ).
          l_send_request = cl_bcs=>create_persistent( ).
    *-->Creating Document
          l_document = cl_document_bcs=>create_document(
          i_type = 'RAW'
          i_text = fp_it_content[]
          i_subject = fp_text_48 ) .
    *-->Adding Attachment*
          CALL METHOD l_document->add_attachment
            EXPORTING
              i_attachment_type    = fp_text_049
              i_attachment_size    = l_v_size
              i_attachment_subject = fp_v_file
              i_att_content_hex    = l_wa_output_binary.
    *-->Add document to send request*
          CALL METHOD l_send_request->set_document( l_document ).
    *    do send delivery info for successful mails
          CALL METHOD l_send_request->set_status_attributes
            EXPORTING
              i_requested_status = 'E'
              i_status_mail      = 'A'.
    *-->Get Sender Object
          l_uname = sy-uname.
          l_sender = cl_sapuser_bcs=>create( l_uname ).
          CALL METHOD l_send_request->set_sender
            EXPORTING
              i_sender = l_sender.
          LOOP AT fp_s_mail INTO l_wa_mail.
            l_v_objid = l_wa_mail-low.
            l_v_mail = l_v_smtpadr.
            TRANSLATE l_v_mail TO LOWER CASE.
            l_recipient = cl_cam_address_bcs=>create_internet_address( l_v_mail ).
            CALL METHOD l_send_request->add_recipient
              EXPORTING
                i_recipient  = l_recipient
                i_express    = 'X' .
    *            i_copy       = ' '
    *            i_blind_copy = ' '
    *            i_no_forward = ' '.
          ENDLOOP.
    **-->Trigger E-Mail immediately*
    *      IF fp_send_all EQ 'X'.
    *        l_send_request->set_send_immediately( 'X' ).
    *      ENDIF.
          CALL METHOD l_send_request->send(
          EXPORTING
          i_with_error_screen = 'X'
            RECEIVING result = l_v_sent_to_all ).
          BREAK TARK.
          IF l_v_sent_to_all = 'X'.
            MESSAGE i000 .
          ENDIF.
        COMMIT WORK.
        CATCH cx_document_bcs INTO l_bcs_exception.
        CATCH cx_send_req_bcs INTO l_send_exception.
        CATCH cx_address_bcs INTO l_addr_exception.
        CATCH cx_bcs INTO l_exp.
      ENDTRY.
    thanks in advance
    rahul

    Every time when i choose other network or dongle to send those mails it gets sent.
    As per the description, seems it's an issue related to this specific network. Probably, they've adjusted their security policy, like blocked some port numbers, etc.
    You might need to contact the support of your ISP to confirm what SMTP settings you need. Check port number, and security settings.
    By the way, this is the forum to discuss questions and feedback for Windows-based Microsoft Office client. Since your query is directly related to
    Office for mac, I would suggest you to post in the forum of
    Office for Mac, where you can get more experienced responses:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011?tab=Threads
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Send mail using Internal Mail server doesn't work

    I can't send mail using my companies mail server, which requires authentication and port 587 to send.  We have a valid, non self-signed SSL certificate so that is not the issue.  I can send mail using Bell's mail server but that violates our regulatory compliance obligations. 
    The server using POP3 and one must login to get mail as well as send.  Unfortunately there is no otehr error message than the: error sending "mail subject".  No further details are provided and when we check the mail servers logs its clear the Pre isn't even attempting to connect to the mail server.  So the request to send mail isn't even being sent out.  That could be an issue with the Pre or with Bell but Bell support will only troubleshoot to the point of fidning out if you can send using their mail server.  We can so their support stops at that point.
    I still have v1.3.1 of the WebOS as v1.3.5 doesn't seem to be out for the Bell Pre's yet.  But from what I've read v1.3.5 is even worse at handling mail not better.  However, there may be a solution out there to this beyond sending the Pre's back (I doubt we can) as Balckberry's and iPhone's don't have this issue.
    Any advice is greatly appreciated.
    Post relates to: Pre p100eww (Bell)

    Further update on this problem.  It does send if I use TLS instead of SSL so that must mean that the Palm Pre doesn't use SSLv3 or higher.  As TLS is a viable security setting option to maintain compliance I can use that.  But still Plam should seriously consider upgrading tis SSL versioning.

  • Unable to send mail with different fonts and colors

    Hi All,
    here is the explanation for my problem:
    I am sending mail using javamail. when i send the text with different font and color its not received in the same way. it is simply sending as plain text.
    Please help me on this issue.
    Thanks
    NG

    Hello,
    I am trying to develop an email application. It consists on sending email from [email protected] to [email protected]
    How can I do this in java ?
    I am using this software but it works only with gmail !!
             * Send Email to the webmaster
             String  d_email = "[email protected]",
                     d_host = "smtp.gmail.com",
                     d_port  = "465",
                     m_to = "[email protected]",
                     m_subject = "Email from user";
             Properties props = new Properties();
             props.put("mail.smtp.user", d_email);
             props.put("mail.smtp.host", d_host);
             props.put("mail.smtp.port", d_port);
             props.put("mail.smtp.starttls.enable","true");
             props.put("mail.smtp.auth", "true");
             props.put("mail.smtp.debug", "true");
             props.put("mail.smtp.socketFactory.port", d_port);
             props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
             props.put("mail.smtp.socketFactory.fallback", "false");
             SecurityManager security = System.getSecurityManager();
             try
                Authenticator auth = new SMTPAuthenticator();
                Session session = Session.getInstance(props, auth);
                //session.setDebug(true);
                MimeMessage msg = new MimeMessage(session);
                msg.setText("This is a message from: "+UserEmail+"\n "+UserMessage);
                msg.setSubject(m_subject);
                msg.setFrom(new InternetAddress(d_email));
                msg.setSentDate(new Date());
                msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
                Transport.send(msg);
             catch (Exception ex)
                ex.printStackTrace();
                out.println("Messaging ERROR: " + ex);
                out.println(stack2string(ex));
                    if(ex.getMessage().compareTo("")!=0)
                        check = "Message NOT SENT " + ex.getMessage();
        private class SMTPAuthenticator extends javax.mail.Authenticator
            public PasswordAuthentication getPasswordAuthentication()
                return
    new PasswordAuthentication("[email protected]", "pwd");
        }please advice

  • How to send mail using jsp program

    am very new to jsp and doing my final year project. i need to send mails using my jsp program.can anyone say wht to do that is wht to include to send mails using jsp program. n also a sample code to send mail using jsp program.
    Thanx in advance

    Use below script.
    <%@ page import="java.util.*, javax.mail.*, javax.mail.internet.*" %>
    <%
    Properties props = new Properties();
    props.put("mail.smtp.host", "mailserver.com");
    Session s = Session.getInstance(props,null);
    InternetAddress from = new InternetAddress("[email protected]");
    InternetAddress to = new InternetAddress([email protected]");
    MimeMessage message = new MimeMessage(s);
    message.setFrom(from);
    message.addRecipient(Message.RecipientType.TO, to);
    message.setSubject("Your subject");
    message.setText("Your text");
    Transport.send(message);
    %>{code}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Delivery Receipt After Sending Mail Using JavaMail ?

    Hi Friends,
    I have written an application using JavaMail which would be used to send mail
    using my organisation's SMTP Server.I would like to include the following functionality in it.Just as
    Microsoft's Outlook has an option to get Delivery Receipt of the mail and Read Receipt of the mail sent
    (Provided the email Client supports it) i would like to have a similar option in my application to.I would like to of how i can do it using JavaMail.I heard that basically we need to set some SMTP properties which the Mail Transfer Agent would recognize and send us the Delivery and Read Receipts.But,i am not sure of what those properties.Can anyone help me regarding this ?

    You might look into creating a custom header that provides a return reciept to the email address you specify. I'm not 100% sure that all mail servers support this but you might want to look into it as a solution.
    -Dave

  • TS3276 Anyone experiencing problems sending mail using TalkTalk - can receive but not send  - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

    Anyone experiencing problems sending mail using Apple Mail viaTalkTalk - can receive but not send  - was ok up until pm 24/08/12 - have recently loaded Mountain Lion patch could this be the problem?

    jag157 wrote:
    "I managed to solve the problem. Under smtp settings (mail preferences/accounts/edit smtp) I set the outgoing port to 25 (as recommended by Talktalk), no authentication (set to none) and unchecked SSL. I found that until I set the port to 25 and authentication to none I was unable to uncheck SSL. One I had done this I was able to send from my main email and other email adddresses set up under my account."
    Superb advice R&W!  My email sending block using TalkTalk started 2 months ago using Snow Leopard, continued when I upgraded to 10.8.2, and has been persistent on my wife's new iPad (IOS 6.1).  Implementing your wise words has fixed all that, and now enables me to call her on FaceTime — previously only she could call me.  Thank you so much; this will save hours of further fruitless searching and phoning.
    Please remember that your email is now insecure, if you wish to have a secure connection SSL must be on and port 25 should be avoided.

Maybe you are looking for

  • Step by step to get leopard join an AD

    I would appreciate it very much if someone could tell me how to join an imac with leopard to an active directory network. there is a part i dont understand which asks for a GUID... i dont know what to put in there. when i add the info and try to conn

  • Trouble downloading the P.O.D. Interactive Booklet?

    I downloaded the new P.O.D. album "Testify" today and the Interactive Digital Booklet will not download, everything else comes down fine. Anyone else experiencing this issue? I get an error message saying "The required file cannot be found." I've tri

  • Configuring XI - PCK communication

    Hello, I configure communication channel from XI 3.0 host to PCK host via XI protocol and I couldn't find following URL parameters:    1. Host (I know the host)    2. Port (I don't know where to look for it)    3. Path prefix (I don't know where to l

  • Anyway to set ProPhotoRGB as output space in ACR hosted by Elements?

    Is there anyway to set ProPhoto RGB as the output space in ACR 4.4.1 hosted by Ps Elements 6 on a Windows Vista Home Premium laptop? The images will be properly corrected using the full version of Photoshop 10.0.1 on my Mac, but I'm used to seeing th

  • Rman standby database error

    Hi All, I am getting the following error when trying to CONFIGURE STANDBY database using rman,db version 10.2.0.2(HP-UX 11.2),library link seems to be fine. do i have to relink the library to oracle on the stanby db host too? any suggestion please. c