Sending mail while using AOL

I log on via AOL through the modem. When I open my Mail application to check my .mac account it receives email no problem. I cannot send email for some reason using the Apple Mail application. (message i get)
"Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings."
The Mail Connection Doctor message is "Trying to log into this SMTP account failed. Please make sure the username and password are correct"
My username and password are correct.
Any help?

You're welcome.
Although your Mac experience is only a month old, how often did you use your Windows laptop to send messages with these accounts when at this airport or when on the train - or I should ask, when was the last time you did so with your Windows laptop?
If you can send messages with all 3 accounts using the authenticated SMTP server for each when connected to the internet via your ISP at home, this is not a Mac or Mail.app problem.
Either the SMTP server settings are not 100% identical as the settings with Outlook or the internet service providers associated with the WiFi network at this airport and on the train have made a change.
Next time when connected to the WiFi network at this airport and/or on the train, try using your .Mac account and authenticated SMTP server to send but disable the authentication for the .Mac SMTP server first. Go to Mail > Preferences > Accounts and under the Account Information tab for your .Mac account preferences at the SMTP server selection, select the Server Settings button below for the .Mac SMTP server.
Select None instead of Password for the Authentication and when finished, select OK to save the changed setting.
For the problem when connected to the internet via your parent's ISP at their home, try entering 587 in place of 25 in the Server Port field - for the .Mac SMTP server and also for the other two SMTP servers used with these IMAP accounts not provided by your ISP.

Similar Messages

HOW TO Send mail while saving VA02

How can i send mail while saving VA02.
The mail address i have to pick from custom table based on plant.
Just for the trial we used : output type :KRML
Application : V1
Transaction medium :7.
and the program RSNASTSO routine SAPOFFICE_AUFRUF_VX is attached in the nace.
The same output type is attached in va02.If we use this output type with this medium , it is asking us mail partner
address also in the VA02.
but we have to get the mail partner from custom table.
And with this output type , the program attched in the NACE (RSNASTSO) IS NOT GETTING triggered.
But the mail is being sent to the mail partner which i mentioned in the VA02 Communication method.
How can i solve this.
Finally my requirement is i have to send a mail to exter id which is maintained in the custom table while saving VA02.
Regards
Ramakrishna L

Hi,
We had set a output type in NACE. and that output type we have in the VA02 transaction also.
But While saving the transaction it is not going through the program mentioned in the NACE for that output type.
But mail is sent to the SAP Inbox or official id .
how that mail is gone i am not understanding.
How can we do to go through the program mentioned in NACE while saving the VA02.
The mail body coming with text " sales order is blocked" sopme thing like this.
This same mail i have to sent to the mail id maintained in Custom table plant wise.
Regards
Ramakrishna L

E-mail photos using aol

Hi, I have a mini mac with iphoto 5 and would like to e-mail photos using aol. I've tried going to preferences but AOL isn't highlighted, only mail is. Please help.

Welcome To  Discussions pattylo!
I suggest that you also post in the Leopard 10.5 Mail & Address Book Forum.
ali b

Can't send mail when using mobile broadband

Hi
I am getting quite frustrated as I can't send mail when using my mobile broadband modem! I can receive mail, and surf the internet etc, but mail just wont send!(i get the usual cannot send try later/resend options). I thought this might be an issue with my mobile broadband but have recently reinstalled it. When at home on a wireless network I have no such issues.
Any help appreciated
Charlie

Cgienke wrote:
I am not using a SMTP it is a Pop3 domain name account from freeparking and uses mail.'NAME'.com for incoming and outgoing mail!
Even though your e-mail service uses the same URL for POP3 and SMTP servers, in the software sense you actually do have separate POP3 and SMTP servers, although they may be hosted on the same machine, or the requests are routed via some "smoke and mirrors" to the right host.
It is not related to my ISP at home, which is Virgin media. My mobile broadband provider is 3. I was thinking it might be that I need to change the port settings in mail when using my mobile modem, but don't know what to change them too(or how to do it!) or configure the modem differently but again not sure what to do there!
Check with the freeparking online help to see if it supports port 587 or some such.
Also try Mail's "Connection Doctor" (under the Window menu) when you're away from home to see if that shows anything useful.
Since you can send e-mail from that SMTP server when you're at home but not when you're using your mobile broadband, I think one of two possibilities is likely: (a) Your mobile broadband provider is blocking your attempts to access the freeparking SMTP server and/or port. (b) The freeparking SMPT server for some reason doesn't like being communicated with via your mobile broadband provider. I'd check with each of them to explore these options.
Does your mobile broadband provider have an SMTP server that you can use instead of the freeparking one?
My modem(Huawei E220) is not particularly Mac friendly as it is, and I believe Mail can be quite sensitive when servers don't respond immediately?
Yes. Mail seems to have a fixed time-out value for server responses.

Sending mail from using utl_smtp error......

Hi
When i try to send mail like as follows
DECLARE
v_connection UTL_SMTP.CONNECTION;
BEGIN
v_connection := UTL_SMTP.OPEN_CONNECTION('xxx.xxx.xxx.xxx',25);
UTL_SMTP.HELO(v_connection,'xxx.xxx.xxx.xxx');
UTL_SMTP.MAIL(v_connection,'[email protected]');
UTL_SMTP.RCPT(v_connection,'[email protected]');
UTL_SMTP.DATA(v_connection,'Sent From PL/SQL');
UTL_SMTP.QUIT(v_connection);
END;
I get the following error..
ERROR at line 1:
ORA-29278: SMTP transient error: 421 Service not available
ORA-06512: at "SYS.UTL_SMTP", line 17
ORA-06512: at "SYS.UTL_SMTP", line 96
ORA-06512: at "SYS.UTL_SMTP", line 138
ORA-06512: at line 4
if i send mail from outlook it goes...the configuration is like this
in mail properties general tab
email address : [email protected]
and i have to tick mark the "include this account when receiving mail or synchro" option
in servers tab
POP3 : xxx.xxx.xxx.xxx
smtp : xxx.xxx.xxx.xxx
and i have to tick the "My server requires authentication" option
and have to give the setting for that also
ie. log on using account : [email protected]
password: xxxxxx
How to Correct it ?
Kris

i am on the same platform and in same account..... and PL/SQL UTL_SMTP gets a connection plus SMTP error, while telnet cannot even get a connection. A very weird one. Not sure what the problem can be.
Worse case, forget telnet and do all your troubleshooting using UTL_SMTP.. with liberal usage of DBMS_OUTPUT. :-)
regd. the connection from my xp client it is
connecting to the telnet server on server, but when i
tri to connect to the ISP's smtp address it throws
the errorNot that strange. You're likely going through a proxy of sorts of to reach the ISP mail server. Besides, to send mail you should be able to use your company's SMTP server as it should route Internet e-mail out to the net automatically.
In fact, many SMTP servers will not allow you to relay via them. E.g. if you connect from domain 1 to SMTP server on domain 2, and you submit an e-mail to be delivered to domain 3, the domain 2 server will tell you to take a hike. It will only accept mail that is destined for its own domain or originating from its own domain.
Reason for this is spam. Open relays are one of the prime reasons for having billions of spam mails being transmitted.
The correct method will be for you on domain 1 to connect to domain 1's SMTP server and submit an e-mail to be delivered to domain 3. That will be accepted and delivered. Using domain 2 as an intermediate agent to act as a relay, is/should not be accepted by all SMTP servers. (your SMTP server should get blacklisted/blackholed if it has an open relay)

Mail Issue Using AOL setting

Hey, just got my hard drive replaced and im trying to set up the mail application. I use aol mail and i called aol and they walked me through what settings i need to have. The issue is that its not letting me recieve or send mail. Here are my settings now and if anyone can help it would be grately appreciated.
IMAP Account
Incoming Mail Server: imap.aol.com
Outgoing Mail Server: smtp.aol.com
(then the names and passwords are all in correctly)
If anyone can help me out, it would be great...thanks

Hi OMS!
Maybe if you use this utility AOL Services Assistant, you'll have better luck!
ali b

Can receive but not send mail while traveling

Hello:
wondering if there is a solution to this recurring problem. My email address is through my website, via my cable service, and I read it using Mail without a problem. However, when I'm traveling and using internet service other than my home, I can read my mail through Mail - but not send it. When I attempt to mail from the Mail window, it starts to send from my Outbox, and then fails, and delivers the message: "Cannot send using the server smtp [cable service name].net Use the popup menu below to try a different outgoing mail server."
I can successfully send if I log onto my mail on my website, but it's more steps. Is there a solution to this, or is this just the nature of using outside networks?

Hi BDAqua;
So can I just change the port number in my Mail>Pref>Accounts>Advanced pane, and be able to mail while traveling? Or does that create some kind of conflict with my current mail/cable provider settings? Port is currently set to 110. (It does say "check with your sysadmin before changing any of these settings". Alas.)

Anyone else having a problem sending mail from their AOL account?

Everytime I try and send an email from my Iphone it says my aol password is wrong. anyone else having this problem?

YES, there are actually several posts about this problem today. It seems that most of use are able to receive mail, and I was able to send mail until about 3 this afternoon. AT&T reset my network settings, but that did not help. I called AOL, but since I use their email for free and am not a paying customer, I couldn not get any help. But I thnk it might be an AOL issue. I am able to log into my AOL email on my desktop,so it's definitly a correct user name and password.

Sending Mail - From IMAP AOL Server

Hey guys, I'm new on here so apologies if I have posted this wrongly.
Does anyone have any experience of sending Mail via AOL's server?
My ISP is BT Total but am using the free online AOL/AIM mail.
Would I be better to get a 'free' SMTP/IMAP server for my PC then relay email to my AOL/AIM account?
Thanks in advance,
Paul @ ([email protected])

you can use the function module
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = maildata
            put_in_outbox              = 'X'
       TABLES
            object_header              = mailheader
            object_content             = mailcontent
            receivers                  = mailrec
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.

Sending mails without using sendmail service. Is that possible?

Hi all,
I am considerably new to Solaris.
I have a query,
Is it possible to send mails out without using sendmail service?
If so how can they be implemented in,
Solaris 7?
Solaris 8?
Solaris 9?
If it is not possible, are there any workarounds to achieve this or else this cannot be implemented at all?
It would be really great if someone could shed light on this query.

Your question is a little ambiguous. However, I will try to answer it.
You need to use a program to send the email for you. On Solaris by default this is sendmail. However, it can be used in a number of modes.
1. It can be run as a daemon, listening on port 25 for new messages to be delivered to it.
This is enabled by default but is not necessary for sending email. If you wish to switch sendmail off as a service in Solaris10 then you should type 'svcadm disable svc:/network/smtp:sendmail'. If you wish to switch it off on earlier Solaris releases you will need to move/erase the startup script in either /etc/rc2.d or /etc/rc3.d.
2. It can be run in 'immediate mode' to send mail immediately.
This allows you to send a mail directly to someone. On a normally configured sendmail instance it will try to deliver the mail immediately - if the server at the other end is unavailable, the mail will be queued locally to be potentially delivered at a later date.
3. It can run in delivery only mode to attempt to send queued mail
Queued mail will not automatically get processed. Sendmail needs to run at a later date to attempt to deliver any queued mail. This can either be done via cron using 'sendmail -q' or sendmail can be left running the whole time and told to rerun the queue in given periods ie 'sendmail -q15m'
There are alternatives to sendmail for delivering mail - postfix, exim, qmail are just three examples. I would advise against trying to deliver mail without using a specific mail agent to do it. Whilst the SMTP mail protocol is pretty simple in basic use cases the protocol does get complex. There is no real downside in using an established program.
HTH.

Lion Applescript to send mail (not using Mail.app) broken

I have been using an applescript to transfer files across a network and then send an email when the files have transferred. I am testing Lion on one machine and my script (which worked in Snow Leopard) fails on the email part. (The files copy okay)
here is the segment:
--> send email
          set authstuff to {"auto", "plain", "login", "crammd5", "anonymous", "cramsha1"}
          set s to "on run {fromx,theAddresses,emailsubject,filelist,smtpServer,puerto"
          if emailauth is not "none" then set s to s & ",user,pwd"
          set s to s & "}" & return & ¬
                    "send mail to theAddresses from fromx SMTP server smtpServer port puerto subject emailsubject body filelist"
          if emailauth is not "none" then set s to s & " username user password pwd authentication " & emailauth
          if emailssl is "true" then set s to s & " with ssl"
          set s to s & return & "end run"
          try
run script s with parameters {emailfrom, emailto, emailsubject, filelist, emailsmtp, emailport, emailuser, emailpass}
          on error msg
                    my err("err 9: " & msg & return & return & s)
          end try
The error message:
OS: 10.7, CPU: Intel 80486
err 9: «script» doesn’t understand the send mail message.
on run {fromx,theAddresses,emailsubject,filelist,smtpServer,puerto,user,pwd}
send mail to theAddresses from fromx SMTP server smtpServer port puerto subject emailsubject body filelist username user password pwd authentication auto
end run

I suspect that the script relies on a third-party scripting addition (possibly 24U Email OSAX?), and that you either need to update to the current version or wait for the developer to make a Lion-compatible version available.
One way to verify this would be to open the script on a Snow Leopard machine and choose "Open Dictionary" from the File menu, then check what scripting additions are listed.
HTH
H

Sending mails automatically using trigger concept-Auto Responder

I am developing an application in which i had to develop an Auto Responder application. For this application i need to send different mails to different customers automatically on different days. Though i got the concept of using timers and the scheduling process from some of the developers, I think it is not suitable for our application because it is a standalone program and it needs to be executed seperately. I am not much sure of this mail application using timers and scheduling concept.
So i need a different application where i can be using triggers in database so that it runs embedded in the application.. As per my idea i will be having two variables x and y in the database. X will be a fixed value which contains the no. of days after which a mail has to be sent to the customer.Y is a counter variable which is initialised to 0 and will be incremented daily(For this i wrote a trigger). Once x and y are equal mail should be sent automatically. But the problem is that i need to monitor this application continously. I don't know how to monitor this application. Therefore i request your help in this regard and tell me whether my idea is correct. If it is correct plz tell me how to do it and if possible send me an example.
Thank you,

Hi,
if u dont want use a standalone application , U can integrate ur schedular class (which i mentioned earlier ) using quartz ,
go to this URL
http://www.opensymphony.com/quartz/
cheers
Rajendra Bandi

How to send mail attachments using java mail

can any one help how to create mails attachments using java mail

you can do it like this:
Message msg = new MimeMessage(session);
String fileAttachment = "c:/test.txt";
Multipart mp = new MimeMultipart();
BodyPart bp = new MimeBodyPart();
FileDataSource fds = new FileDataSource(fileAttachment);
bp.setDataHandler(new DataHandler(fds));
bp.setFileName(fds.getName());
mp.addBodyPart(bp);
msg.setContent(mp);
...

Missing sentences in a forwarded mail while using firefox but not happening in IE or Chrome

I am forwarding a earlier email to the same person. While forwarding 3 sentences were missing while using FIREFOX. But when I tried to do the same with IE or Chrome , it was working fine.

Hi,
A Code 10 error is generated in Device Manager in one of the following situations:
Device Manager can't start the device.
One of the drivers that the device needs does not start.
Device Manager has insufficient information to recognize the error that is bubbled up by the device driver.
Note In this situation, the Code 10 error can be a very generic message that indicates some kind of unspecified driver or device problem.
For more information regarding Code 10 errors, please see:
Fix: "This device cannot start" Code 10 error in Device Manager in Windows
Please try to update the device drivers with the error code 10. More troubleshooting steps please refer to the KB article.
Best regards
Michael Shao
TechNet Community Support

Further changes to workflow to send mail while creating material.

Hi,
I have created a workflow which sends mail to users when a material is created.
Now, I want to send mails to specific users depending upon the Industry sector and Material type.
For eg:
1) user1 should receive mail if the new material belongs to 'Aerospace & Defense' Industry sector and 'Raw material' Material type.
2) user2 should receive mail if the new material belongs to 'Retail' Industry sector and 'Semifinished goods' Material type.
Is there a way where I can create a condition for a mail to be sent?
Thanks & Regards.

self answered

Sending mail while using AOL

Similar Messages

Maybe you are looking for